Resolving the Server Name from a TNS Service name

A computer client has an Oracle ODBC connection that is attached to a TNS Service Name "X". The TNS Service Name is running in Server "Y".
Does anybody know a quick way to resolve the Server Name "Y" from the TNS Service Name "X" ???
Our current solution is based on opening the file tnsnames.ora, which is normally located in $ORAHOME\network\ADMIN\TNSNAMES.ORA, and by parsing the file resolve the server name. However, we were wondering if there would be a more reliable way to do this. Is there an Oracle API that we can execute? Something like "GetHostName(TNSServiceName)"?
Many Thanks

Not that I'm aware of.
If you were using an Oracle Names server to resolve tnsnames, rather than a tnsnames.ora file, this would be a lot easier. You'd just update the Oracle Names server and all the clients would start pointing at the right machine.
Justin

Similar Messages

Resolving a Server Name from a TNS Service Name

A computer client has an Oracle ODBC connection that is attached to a TNS Service Name "X". The TNS Service Name is running in Server "Y".
Does anybody know a quick way to resolve the Server Name "Y" from the TNS Service Name "X" ???
Our current solution is based on opening the file tnsnames.ora, which is normally located in $ORAHOME\network\ADMIN\TNSNAMES.ORA, and by parsing the file resolve the server name. However, we were wondering if there would be a more reliable way to do this. Is there an Oracle API that we can execute? Something like "GetHostName(TNSServiceName)"?
Many Thanks

tring TNSPING <service>
the outputline contents the HOSTname

Can you select the server name or I.P. from SQL

I am trying to find where I can get the server name or IP address from an SQL query, Can you Help?

Do you mean the database host? It's like this:
SQL> select host_name from v$instance;
HOST_NAME
sqlintdb4

Hi, I'm trying to set up my Time Machine, but I get this message: The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again. how to resolve?

Hi, I'm trying to set up my Time Machine, but I get this message: The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again. how to resolve?

Did you reboot the TC? That is always the first step.
Reboot the whole network if that is not enough.
If you still have issues.. come back to us but generally the best way is to factory reset the TC and start over.
We need a bit more info on the whole network layout and what OS you are running. What model TC you have??

Connection Failed: The server "name" may not exist or it is unavailable...

So I think I know what caused this problem, but I can't figure out how to make it stop...
When I go to print, if I try to click on the pop-up to change the default printer setting, there's a LONG delay, then I get a dialog that says:
Connection Failed
The server "name" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, then try again.
Then there's another delay and I get the message a second time. I can then select any of my printer settings and print fine, it's just an annoying delay if I click on that pop-up accidentally or need to change it.
I have a new iMac and I migrated from my old G5. The "name" of the server it is seeking is my old G5, so that must be in the settings somewhere, but I can't find it. I tried going into the Print & Fax settings in System Preferences, deleting the printer there, and then re-adding, but that didn't clear it up.
Thanks for any insight you can provide!
--John

Hmm, well, this stopped working again for me. I tried swapping ethernet and re-installing the Airport client update - to no avail. I could always see my Mac shares from PCs though. However, I have (for now) managed to connect to the PC using ip address rather than name even though finder quite clearly sees the name. Does your printer connection work by ip rather than name ? I'm going to play name lookup detective for a bit now - it's some kind of Netbios name lookup issue I guess as I've no local DNS service. resolv.conf is apparently not used so a bit of learning to do! ...
... nmblookup seems to work but nslookup doesn't. Looks like SL connect via Finder isn't using nmblookup properly and I can't see how to make that work. When this gets reported enough it should get a publicised work-round or a fix. If only I can get dig/nslookup to slave out to nmblookup ...must be something I can configure for that ??

Unable to retrieve clouds on VMM server. Please make sure the server name is correct and try connecting again

I getting this annoying error "Unable to retrieve clouds on VMM server. Please make sure the server name is correct and try connecting again." I've followed the recommended documentation for setting up SPF and Azure using the following:
http://www.hyper-v.nu/archives/mvaneijk/2013/01/installing-and-configuring-system-center-service-provider-foundation/
I've gone thru the troubleshoot steps from the following:
http://blogs.technet.com/b/scvmm/archive/2014/03/04/kb-the-windows-azure-pack-service-management-portal-does-not-retrieve-cloud-settings.aspx
http://social.technet.microsoft.com/forums/windowsazure/en-US/363e7dae-7370-4605-bc8d-b98fa6dc9d8e/unable-to-register-vmm-server
So you don't need to send me those links.
I found a few others which pointed me to the event logs WindowsAzurePack\MGmtSVC-AdminAPi and AdminSite. In these event logs, I see a lot of event ID 12 and 1046. The contents of event id 12 is the following:
Log Name: Microsoft-WindowsAzurePack-MgmtSvc-AdminSite/Operational
Source: Microsoft-WindowsAzurePack-MgmtSvc-AdminSite
Date: 6/19/2014 3:27:55 PM
Event ID: 12
Task Category: (65522)
Level: Error
Keywords: None
User: IIS APPPOOL\MgmtSvc-AdminSite
Computer: usw-azure-01.uswired.com
Description:
Error:ManagementClientException: Resource not found.
<Exception>
<Type>ManagementClientException</Type>
<Message>Resource not found.</Message>
<StackTrace><![CDATA[
at Microsoft.WindowsAzure.Server.Management.ManagementClientBase.<ThrowIfResponseNotSuccessful>d__2b.MoveNext()
at Microsoft.WindowsAzure.Management.TaskSequencer.<>c__DisplayClass1e`1.<RunSequenceAsync>b__1d(Task previousTask)
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.WindowsAzure.Server.SystemCenter.AdminExtension.Controllers.SystemCenterAdminController.<GetResourceProviderAsync>d__2e7.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.WindowsAzure.Server.SystemCenter.AdminExtension.Controllers.SystemCenterAdminController.<GetAutomationResourceProvider>d__2b6.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at lambda_method(Closure , Task )
at System.Web.Mvc.Async.TaskAsyncActionDescriptor.EndExecute(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass3f.<BeginInvokeAsynchronousActionMethod>b__3e(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<>c__DisplayClass2a.<BeginInvokeAction>b__20()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult)]]></StackTrace>
<HttpContext>
<User IsAuthenticated="true" Name="USWIRED\Administrator" />
<Request>
<RawUrl>/SystemCenterAdmin/GetAutomationResourceProvider</RawUrl>
<UserHostAddress>fe80::c179:19c8:c5f2:7309%12</UserHostAddress>
<Headers>
<Header Key="Cache-Control" Value="no-cache" />
<Header Key="Connection" Value="Keep-Alive" />
<Header Key="Content-Length" Value="2" />
<Header Key="Content-Type" Value="application/json" />
<Header Key="Accept" Value="application/json, text/javascript, */*; q=0.01" />
<Header Key="Accept-Encoding" Value="gzip, deflate" />
<Header Key="Accept-Language" Value="en-US" />
<Header Key="Host" Value="usw-azure-01.uswired.com:30091" />
<Header Key="Referer" Value="https://usw-azure-01.uswired.com:30091/" />
<Header Key="User-Agent" Value="Mozilla/5.0 (Windows NT 6.3; WOW64; Trident/7.0; rv:11.0) like Gecko" />
<Header Key="x-ms-client-session-id" Value="c343c29d-20b1-412b-be94-879409205700" />
<Header Key="x-ms-client-antiforgery-id" Value="0crwi2qNk20bMr6C04/vKd4L28WG1nd8JKBdOlCCp+xlph40YeL2oTdmeiTkPmE272S2dqmGQMNo+FElKkG2MdR0Xhq41RU/t8PrFjcG0Vgx4a8dgZLbfKVURo9n84F1XWtJOkTTUK/OeNVWBrK1+w=="
/>
<Header Key="x-ms-client-request-id" Value="dcc427c7-40fc-4fdd-9a70-7622969ff40d-2014-06-19 22:27:55Z" />
<Header Key="X-Requested-With" Value="XMLHttpRequest" />
<Header Key="DNT" Value="1" />
<Cookies>
<Cookie Name="AdminSiteFedAuth" Secure="false" Expires="0001-01-01T00:00:00Z" Domain="" Path="/" Value="Redacted (2000 characters)" />
<Cookie Name="AdminSiteFedAuth1" Secure="false" Expires="0001-01-01T00:00:00Z" Domain="" Path="/" Value="Redacted (424 characters)" />
<Cookie Name="__RequestVerificationToken_Admin" Secure="false" Expires="0001-01-01T00:00:00Z" Domain="" Path="/" Value="Redacted (128 characters)" />
</Cookies>
</Headers>
</Request>
</HttpContext>
</Exception>, operationName:SystemCenterAdmin.GetAutomationResourceProvider, version:, accept language:en-US, subscription Id:, client request Id:dcc427c7-40fc-4fdd-9a70-7622969ff40d-2014-06-19 22:27:55Z, principal Id:USWIRED\Administrator, page request
Id:c343c29d-20b1-412b-be94-879409205700, server request id:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-WindowsAzurePack-MgmtSvc-AdminSite" Guid="{5E78D550-1384-5A96-C12A-CB6DA7BC6365}" />
<EventID>12</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>65522</Task>
<Opcode>0</Opcode>
<Keywords>0x0</Keywords>
<TimeCreated SystemTime="2014-06-19T22:27:55.971935000Z" />
<EventRecordID>399</EventRecordID>
<Correlation ActivityID="{FAA512AF-E0A9-4F2A-80EF-09F72D2F7918}" />
<Execution ProcessID="3424" ThreadID="2308" />
<Channel>Microsoft-WindowsAzurePack-MgmtSvc-AdminSite/Operational</Channel>
<Computer>usw-azure-01.uswired.com</Computer>
<Security UserID="S-1-5-82-4118156790-2181488624-806685255-2797011695-3958995103" />
</System>
<EventData>
<Data Name="message">ManagementClientException: Resource not found.
<Exception>
<Type>ManagementClientException</Type>
<Message>Resource not found.</Message>
<StackTrace><![CDATA[
at Microsoft.WindowsAzure.Server.Management.ManagementClientBase.<ThrowIfResponseNotSuccessful>d__2b.MoveNext()
at Microsoft.WindowsAzure.Management.TaskSequencer.<>c__DisplayClass1e`1.<RunSequenceAsync>b__1d(Task previousTask)
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.WindowsAzure.Server.SystemCenter.AdminExtension.Controllers.SystemCenterAdminController.<GetResourceProviderAsync>d__2e7.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.WindowsAzure.Server.SystemCenter.AdminExtension.Controllers.SystemCenterAdminController.<GetAutomationResourceProvider>d__2b6.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at lambda_method(Closure , Task )
at System.Web.Mvc.Async.TaskAsyncActionDescriptor.EndExecute(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass3f.<BeginInvokeAsynchronousActionMethod>b__3e(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<>c__DisplayClass2a.<BeginInvokeAction>b__20()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult)]]></StackTrace>
<HttpContext>
<User IsAuthenticated="true" Name="USWIRED\Administrator" />
<Request>
<RawUrl>/SystemCenterAdmin/GetAutomationResourceProvider</RawUrl>
<UserHostAddress>fe80::c179:19c8:c5f2:7309%12</UserHostAddress>
<Headers>
<Header Key="Cache-Control" Value="no-cache" />
<Header Key="Connection" Value="Keep-Alive" />
<Header Key="Content-Length" Value="2" />
<Header Key="Content-Type" Value="application/json" />
<Header Key="Accept" Value="application/json, text/javascript, */*; q=0.01" />
<Header Key="Accept-Encoding" Value="gzip, deflate" />
<Header Key="Accept-Language" Value="en-US" />
<Header Key="Host" Value="usw-azure-01.uswired.com:30091" />
<Header Key="Referer" Value="https://usw-azure-01.uswired.com:30091/" />
<Header Key="User-Agent" Value="Mozilla/5.0 (Windows NT 6.3; WOW64; Trident/7.0; rv:11.0) like Gecko" />
<Header Key="x-ms-client-session-id" Value="c343c29d-20b1-412b-be94-879409205700" />
<Header Key="x-ms-client-antiforgery-id" Value="0crwi2qNk20bMr6C04/vKd4L28WG1nd8JKBdOlCCp+xlph40YeL2oTdmeiTkPmE272S2dqmGQMNo+FElKkG2MdR0Xhq41RU/t8PrFjcG0Vgx4a8dgZLbfKVURo9n84F1XWtJOkTTUK/OeNVWBrK1+w=="
/>
<Header Key="x-ms-client-request-id" Value="dcc427c7-40fc-4fdd-9a70-7622969ff40d-2014-06-19 22:27:55Z" />
<Header Key="X-Requested-With" Value="XMLHttpRequest" />
<Header Key="DNT" Value="1" />
<Cookies>
<Cookie Name="AdminSiteFedAuth" Secure="false" Expires="0001-01-01T00:00:00Z" Domain="" Path="/" Value="Redacted (2000 characters)" />
<Cookie Name="AdminSiteFedAuth1" Secure="false" Expires="0001-01-01T00:00:00Z" Domain="" Path="/" Value="Redacted (424 characters)" />
<Cookie Name="__RequestVerificationToken_Admin" Secure="false" Expires="0001-01-01T00:00:00Z" Domain="" Path="/" Value="Redacted (128 characters)" />
</Cookies>
</Headers>
</Request>
</HttpContext>
</Exception></Data>
<Data Name="requestId">
</Data>
<Data Name="subscriptionId">
</Data>
<Data Name="clientRequestId">dcc427c7-40fc-4fdd-9a70-7622969ff40d-2014-06-19 22:27:55Z</Data>
<Data Name="principalId">USWIRED\Administrator</Data>
<Data Name="version">
</Data>
<Data Name="pageRequestId">c343c29d-20b1-412b-be94-879409205700</Data>
<Data Name="acceptLanguage">en-US</Data>
<Data Name="operationName">SystemCenterAdmin.GetAutomationResourceProvider</Data>
</EventData>
</Event>
Event ID 1046 is
Log Name: Microsoft-WindowsAzurePack-MgmtSvc-AdminSite/Operational
Source: Microsoft-WindowsAzurePack-MgmtSvc-AdminSite
Date: 6/19/2014 3:32:56 PM
Event ID: 1046
Task Category: (116)
Level: Error
Keywords: None
User: IIS APPPOOL\MgmtSvc-AdminSite
Computer: usw-azure-01.uswired.com
Description:
Could not connect to Resource Provider. Error: Resource not found.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-WindowsAzurePack-MgmtSvc-AdminSite" Guid="{5E78D550-1384-5A96-C12A-CB6DA7BC6365}" />
<EventID>1046</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>116</Task>
<Opcode>0</Opcode>
<Keywords>0x0</Keywords>
<TimeCreated SystemTime="2014-06-19T22:32:56.854137500Z" />
<EventRecordID>413</EventRecordID>
<Correlation ActivityID="{C20DBEAD-388F-4CF4-80FD-21C6419CC2F1}" />
<Execution ProcessID="3424" ThreadID="2768" />
<Channel>Microsoft-WindowsAzurePack-MgmtSvc-AdminSite/Operational</Channel>
<Computer>usw-azure-01.uswired.com</Computer>
<Security UserID="S-1-5-82-4118156790-2181488624-806685255-2797011695-3958995103" />
</System>
<EventData>
<Data Name="errorMessage">Resource not found.</Data>
</EventData>
</Event>
The other thing I notice is that when trying to connect to the VMM. It's trying to use domain\username, yet when I try logging in with domain\username via the SCVMM Console. I get the You cannot access VMM management server (Error ID: 1604).
I'm not sure if this is why I can not add the VMM to WAP. Any help would be appreciated. Thanks
Nick

Hello,
I am not sure about the answer but I guess these steps will solve your problem:
1) Log in to the SPF server by using an account that is a member of the SPF_Admin local group.
2) Open an elevated Windows PowerShell window.
3) Type the following commands, and press Enter after you type each command:
Import-module spfadmin
New-SCSPFTenant -Name Administrator -SubscriptionId 00000000-0000-0000-0000-000000000000
4) Close the WAP Server Management Portal, and then reconnect to it to update all items.

Yosemite 10.10.2 server app. FTP help. I have a program running in my local server enviroment that wants to FTP to my mac folder. It asks for the server , name, password, port and path. what are they?

So I have set up a localhost area in my Mac. I have the new server.app and I am running yosemite 10.10.2 .
I have a program running in my local server enviroment that wants to FTP to my mac .
It asks for the server , name, password, port and path. what are they?
I am pretty certain that the Serveris "localhost",
Name is my macs name (like my-mac-min)
password is "my login password"
and they suggest port 21.
But what is the file path, lets just say my site is set up http://localhost/siteftp and is actually at my Users/Sites/siteftp folder.
Why cant this program connect to the mac.
Is it because they are both operating in the same localhost enviroment,
could it be my folder permissions are not correct on siteftp folder?
Help please !

I tried turning the computer off and then back on. The alerts don't show the notice to update as resolved. Hopefully this is not a problem or an indicator or another problem. Should I ignore or reload 10.10.1 from the app store to trigger a resolved check in a green circle?
Interesting that I had to buy server software after my free Yosemite download. I would have hoped that the two pieces of software would have gone together without any complication. It is not positive to end up buying a problem. Ah well, time to move on.

An attempt to resolve the DNS name of a domain controller in the domain being joined has failed.

"An attempt to resolve the DNS name of a domain controller in the domain being joined has failed."
This is the error message I get whenever I try to connect to my servers domain which I just set up earlier today. I have read through a bunch of other threads on the same error message
but each of them has had different solutions and none of them have helped me.
The one thing that I suspect is related to my problem is that I can't ping my domain on the W7 computer I'm trying to connect. I can ping the server, but not the domain. the domain
i'm using is set up like "domain.local" .
Other things that might be relevant.
I'v already set up user accounts and a computer under the Server 2012 active domain administrator settings.
I'v port forwarded ports 80 and 443 on the server.
The server has a static IPv4 IP adress. I haven't done anything with IPv6
The W7 computer has a dynamic IP adress, but I don't think it changes. I believe my router is set up to keep it constant, not 100% sure though.
Thanks for any help with this, I'm pretty much out of ideas on this.

Hi ZachPrinz,
Firstly, would you please let us know the outputs of ipconfig /all both of the clients and the DC.
Also, if you run nslookup FQDN of your DC from your clients, what will you receive?
Meanwhile, regarding the issue, we can refer to
the similar thread and see how it works.
More information:
Troubleshooting Domain Join Error Messages (en-US)
Hope this helps.
Jeremy Wu
TechNet Community Support

The server name osr_server1 is unknown to the administration server

I have successfully installed OSR and created WLS Domain using config.cmd. But when I try to start by command line (startManagedWebLogic.cmd osr_server1) I got the error "server is unknown". I have no idea what could be wrong.
Basically I followed http://niallcblogs.blogspot.com.br/2010/09/oracle-service-registry-and-osb11g.html.
The complete command line is:
C:\Oracle\Middleware\user_projects\domains\base_domain\bin>startManagedWebLogic.
cmd osr_server1
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=
48m -XX:MaxPermSize=128m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\patch_wls1036\profiles\default\sys_manifest_classpa
th\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_oepe180\profiles\default\sys_mani
fest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_ocp371\profiles\defau
lt\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_adfr1111\p
rofiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK
160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\
Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\fe
atures\weblogic.server.modules_10.3.6.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server
\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Or
acle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\MIDDLE~1\WLSERV
~1.3\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\x
qrl.jar;C:\Program Files\Java\jdk1.7.0_09\jre\lib
PATH=C:\Oracle\MIDDLE~1\patch_wls1036\profiles\default\native;C:\Oracle\MIDDLE~1
\patch_oepe180\profiles\default\native;C:\Oracle\MIDDLE~1\patch_ocp371\profiles\
default\native;C:\Oracle\MIDDLE~1\patch_adfr1111\profiles\default\native;C:\Orac
le\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server
\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\b
in;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\Oracle\product\11.1.0\client_1\bin;C:\Wind
ows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowe
rShell\v1.0\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program File
s\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Micr
osoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft Visual Studio 9.0\Co
mmon7\IDE\PrivateAssemblies\;c:\Program Files\Microsoft SQL Server\90\Tools\binn
\;C:\Program Files\Java\jdk1.7.0_09\bin;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\nat
ive\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_29"
Java(TM) SE Runtime Environment (build 1.6.0_29-b11)
Java HotSpot(TM) Client VM (build 20.4-b02, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThre
shold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -Dweblogic.Name=osr_server1 -D
java.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -D
weblogic.security.SSL.trustedCAKeyStore="C:\Oracle\Middleware\wlserver_10.3\serv
er\lib\cacerts" -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.
3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDD
LE~1\WLSERV~1.3\server -Dweblogic.management.discover=false -Dweblogic.managem
ent.server=http://SISTEMA026:7001 -Dwlw.iterativeDev=false -Dwlw.testConsole=fa
lse -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_
wls1036\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_oepe
180\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_ocp371\p
rofiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_adfr1111\prof
iles\default\sysext_manifest_classpath weblogic.Server
<19/11/2012 18h40min53s BRST> <Info> <Security> <BEA-090905> <Disabling CryptoJ
JCE Provider self-integrity check for better startup performance. To enable this
check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<19/11/2012 18h40min53s BRST> <Info> <Security> <BEA-090906> <Changing the defau
lt Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable
this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<19/11/2012 18h40min53s BRST> <Info> <WebLogicServer> <BEA-000377> <Starting Web
Logic Server with Java HotSpot(TM) Client VM Version 20.4-b02 from Sun Microsyst
ems Inc.>
<19/11/2012 18h40min53s BRST> <Info> <Security> <BEA-090065> <Getting boot ident
ity from user.>
Enter username to boot WebLogic server:weblogic_osr2
Enter password to boot WebLogic server:
<19/11/2012 18h41min23s BRST> <Info> <Management> <BEA-141107> <Version: WebLogi
c Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
<19/11/2012 18h41min24s BRST> <Emergency> <Management> <BEA-141151> <The admin s
erver could not be reached at http://SISTEMA026:7001.>
<19/11/2012 18h41min24s BRST> <Critical> <WebLogicServer> <BEA-000362> <Server f
ailed. Reason:
There are 1 nested errors:
weblogic.management.ManagementException: The server name osr_server1 is unknown
to the administration server. Check if restart is required.
at weblogic.management.provider.internal.RuntimeAccessImpl.initialize(Ru
ntimeAccessImpl.java:447)
at weblogic.management.provider.internal.RuntimeAccessService.start(Runt
imeAccessService.java:49)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesMan
ager.java:461)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServ
icesManager.java:166)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:881)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:568)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:469)
at weblogic.Server.main(Server.java:71)
>
<19/11/2012 18h41min24s BRST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
te changed to FAILED>
<19/11/2012 18h41min24s BRST> <Error> <WebLogicServer> <BEA-000383> <A critical
service failed. The server will shut itself down>
<19/11/2012 18h41min24s BRST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
te changed to FORCE_SHUTTING_DOWN>

Yes, there are the tags you have suggested. The complete config.xml is below.
I tried:
C:\Oracle\Middleware\user_projects\domains\base_domain\bin>startManagedWebLogic.
cmd osr_server1
When asked the user, I tried the node-manager-username weblogic_osr2 and the admin user but I always received the error: The server name osr_server1 is unknown to the administration server.
<?xml version="1.0" encoding="UTF-8" ?>
- <domain xsi:schemaLocation="http://xmlns.oracle.com/weblogic/security/wls http://xmlns.oracle.com/weblogic/security/wls/1.0/wls.xsd http://xmlns.oracle.com/weblogic/domain http://xmlns.oracle.com/weblogic/1.0/domain.xsd http://xmlns.oracle.com/weblogic/security http://xmlns.oracle.com/weblogic/1.0/security.xsd http://xmlns.oracle.com/weblogic/security/xacml http://xmlns.oracle.com/weblogic/security/xacml/1.0/xacml.xsd" xmlns="http://xmlns.oracle.com/weblogic/domain" xmlns:sec="http://xmlns.oracle.com/weblogic/security" xmlns:wls="http://xmlns.oracle.com/weblogic/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<name>base_domain</name>
<domain-version>10.3.6.0</domain-version>
- <security-configuration>
<name>base_domain</name>
- <realm xmlns:pas="http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator">
<sec:authentication-provider xsi:type="wls:default-authenticatorType" />
- <sec:authentication-provider xsi:type="wls:default-identity-asserterType">
<sec:active-type>AuthenticatedUser</sec:active-type>
</sec:authentication-provider>
<sec:role-mapper xsi:type="wls:default-role-mapperType" />
<sec:authorizer xsi:type="wls:default-authorizerType" />
<sec:adjudicator xsi:type="wls:default-adjudicatorType" />
<sec:credential-mapper xsi:type="wls:default-credential-mapperType" />
<sec:cert-path-provider xsi:type="wls:web-logic-cert-path-providerType" />
<sec:cert-path-builder>WebLogicCertPathProvider</sec:cert-path-builder>
<sec:name>myrealm</sec:name>
- <sec:password-validator xsi:type="pas:system-password-validatorType">
<sec:name>systemPasswordValidator</sec:name>
<pas:min-password-length>8</pas:min-password-length>
<pas:min-numeric-or-special-characters>1</pas:min-numeric-or-special-characters>
</sec:password-validator>
</realm>
<default-realm>myrealm</default-realm>
<credential-encrypted>{AES}LArhcMlb7Jdt2zQbNnzLdi3luhgdNyPJS1JIVb9H+VWi5XcC9SP4SQa/8mp/SKI072DoA/sGnzvYDqpn3OxQl3pE0LxaXoOmYNnWsSv/keo8I0rMvrXWJXqn4fbSl9bd</credential-encrypted>
*<node-manager-username>weblogic_osr2</node-manager-username>*
<node-manager-password-encrypted>{AES}1SioVLWu3mu/u6y/You1ZGeBTXJHfUCq+loZSCVOdSE=</node-manager-password-encrypted>
</security-configuration>
- <server>
<name>AdminServer</name>
<listen-address />
</server>
- <server>
*<name>osr_server1</name>*
<listen-port>7101</listen-port>
<listen-address>sistema026.br-lihi.libertyinternational.com</listen-address>
</server>
- <embedded-ldap>
<name>base_domain</name>
<credential-encrypted>{AES}C+0tyHN5wihXjDHQKdQt/5PvYpko8rS0PL6wSSvp3sHLZscRB1RjSNL8MXfHHjwW</credential-encrypted>
</embedded-ldap>
<configuration-version>10.3.6.0</configuration-version>
- <app-deployment>
<name>registry</name>
<target>osr_server1</target>
<module-type>war</module-type>
<source-path>C:\Oracle\Middleware\registry111/conf/porting/weblogic/build/registry.war</source-path>
<deployment-order>195</deployment-order>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<admin-server-name>AdminServer</admin-server-name>
- <jdbc-system-resource>
<name>jdbc/registryDS</name>
<target>osr_server1</target>
<descriptor-file-name>jdbc/registry-20121119171422-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
</domain>

How to Serve HTML from a Proxy Service?

I am trying to serve HTML from a proxy service.
I set up a Messaging Service with request type = 'None' and response type = 'Text'; with Endpoint URL = '/OSB_Project/Proxy_Services/InfoPingerProxyService.html'.
In my incoming request pipeline I set an html Transport Header action to define Content-Type = 'text/html'.
In the response pipeline I replace the body with the html document contents...
Trouble is, when I access the proxy (via a standard browser GET), I always produce an XML file with an <?xml...?> processing instruction:
<?xml version="1.0" encoding="UTF-8"?>
<html>
Also: the browser always sees an XML response regardless, it seems.
Any suggestions gratefully accepted.
Cheers,
Alph

More on this.
I made an "educated guess' that the path should be
{code}./ctx:transport/ctx:response/tp:headers/http:Content-Type{code}
But take a look at the following, you will see that the content type IS now text/html, but the XML processing instruction is still there...
{code}
:\BIN\wget-1.11.4-1-bin\bin>wget -d http://localhost:7001/Test_Project/ProxySe
rvice1?q=1
SYSTEM_WGETRC = c:/progra~1/wget/etc/wgetrc
syswgetrc = C:\BIN\wget-1.11.4-1-bin/etc/wgetrc
DEBUG output created by Wget 1.11.4 on Windows-MinGW.
--2010-09-15 15:33:17-- http://localhost:7001/Test_Project/ProxyService1?q=1
Resolving localhost... seconds 0.00, 127.0.0.1
Caching localhost => 127.0.0.1
Connecting to localhost|127.0.0.1|:7001... seconds 0.00, connected.
Created socket 268.
Releasing 0x0063a620 (new refcount 1).
---request begin---
GET /Test_Project/ProxyService1?q=1 HTTP/1.0
User-Agent: Wget/1.11.4
Accept: */*
Host: localhost:7001
Connection: Keep-Alive
---request end---
HTTP request sent, awaiting response...
---response begin---
HTTP/1.1 200 OK
Connection: Keep-Alive
Date: Wed, 15 Sep 2010 05:33:17 GMT
Content-Length: 61
Content-Type: text/html; charset=utf-8
X-Powered-By: Servlet/2.5 JSP/2.1
---response end---
200 OK
Registered socket 268 for persistent reuse.
Length: 61 [text/html]
Saving to: `ProxyService1@q=1'
100%[=====================================> ] 61 --.-K/s in 0s
2010-09-15 15:33:17 (1.23 MB/s) - `ProxyService1@q=1' saved [61/61]
C:\BIN\wget-1.11.4-1-bin\bin>type "ProxyService1@q=1"
<?xml version="1.0" encoding="UTF-8"?>
<server>8088</server>
C:\BIN\wget-1.11.4-1-bin\bin>
{code}
(I know that the actual CONTENT [ie "<server>8088</server"] is not really HTML at the moment...this is just intermediate testing content...)
Back to the issue of how to get rid of that processing instruction...
The proxy service is configured as a messaging service with request = none and response = text.
Cheers,
Alph

Unable to connect to the analysis server the server name was not found

Hi,
One of the user is trying to run reports from PWA 2010 and gets the below error.
Unable to connect to the analysis server the server name was not found.Please verify the name you entered is correct and then try again.
Errors in the ole db provider.An error occurred while loading the connection dialog boxcomponent for prompting.
Please advice why?

Dear Project Help,
Please help the community with more information.
Which kind of reports are you running? Excel using OLAP?
If so, check out on your Excel sheet connection information to see if it's using the SSS Authentication mode:
I'm asking this because if the failure happens with a single user, the authentication method is wrong and you should set up Secure Store Service properly.
Let me know if you need any help on this.
Cheers

'"Connection Failed" : The server "rrnas01" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again' message

'"Connection Failed" : The server "rrnas01" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again' message keeps displaying whenever I try to open any Adobe CS5 applications (except for Adobe Acrobat Pro). It displays until I click "OK" about 15-20 times or so and then will finally let my program open.
I have tried deleting files within my Library/Preferences folder and turning off/deleting login items within my system preferences as other forums suggested but nothing happened. Spending 3.5 hours on the phone with Adobe and completely uninstalling and then reinstalling the entire CS5 Master Collection didn't work either.
Also, it may be helpful to know that my programs worked fine for about three weeks then when we got internet and changed the password (the join, not the adminstrative password) with the wireless network "ScubaSteve" (which I've used with no problems at my old apartment) it started acting up. I have never seen "rrnas01" before so I don't know at all where it came from. I also installed the free 30 day trial of Suitcase Fusion 3 recently, but thinking that could also be the cause I have uninstalled it, and still no help.
Please help me! And please keep in mind I don't know all the computer lingo that a lot of the people in these forums seem to know. Thanks in advance for ny help you can give me.

It may not be possible .. there is a major bug between Mountain Lion and the TC where the TC disk goes off the radar of the computer.
Lion is also affected but not as badly.
7.6.4 seems worse than earlier firmware.. so back to 7.6.1 or 7.5.2 if that is possible.
Obviously that is not a solution for a later Gen5 TC.
Reset to factory after the firmware downgrade. .use all network names that are short, no spaces and pure alphanumeric.
If the TC is the main router set the dhcp to a very short lease time.. eg 30min.. and see how it goes, or try a longer lease like 99days.
I prefer the very short lease but response has been mixed.
Use ethernet not wireless.. ethernet is always more reliable and stable than wireless.
And last .. a nightly electric timer that powers off every night at midnight for 1min.. would not be the first device we have suggested a fix that amounts to beat the unit to the punch by forcing it to reboot since it is unstable.

Like i said Microsoft outlook keeps coming up in my iTunes and a box with server name i ,v tried all the server names on my account and it will not work and now my iTunes account is stuffed

I,m sorry but i,v a enough of all these **** problems Microsoft has been on help with helping me fix this problem i,v tried everything to fix it and i do know that i,m not talking to Apple like i said this outlook from Microsoft keeps coming up every time i start my iTunes up and then it has a box with enter server name and i,v tried all the server names on my laptop and it will not accept any of them I,v spent a heep of money already with computer people and my laptop is now more stuffed and i don,t trust anyone any more my computer bloke stufhfed my iTunes account up as well and tried to tell me i had to upload a new iTunes and i fixed it up and i,v never done a computer coruse in my life sorry for the all the chat but i,m just sick of all the scams just to get money out of you one more thing my iCould is not backing up to my iCloud as well so where is all my dtuff gone to so much for security

Ande i,v got on idea where to see your relpys here this is all new to me like where are your messages here thank you

How to get the Server Name in Crystal

Hi All,
We created a Crystal Report that pulls images from a File Location at the run time and this File Location is different for each environment (D-Q-P). We are trying to automate the file location by the server name. Is there any function in Crystal Reports that we can get the server name so we know if it is D-Q or P system?
Thank you,

Hi,
There is no function in CR that can fetch the Server Name. That is something you need to provide to the formula.
If you're loading images from a location on the Server, you can always use a Relative Path. For eg: if the images would be stored in a folder called Images, then you can write a formula on the 'Graphic Location' for the OLE object as:
"/Images/Crystal.jpg"
This will load the image from the folder when it is run on D, Q or P.
Hope this helps!
-Abhilash

Unknown Host Unable to locate the server requested --- the server does not have a DNS entry. Perhaps there is a misspelling in the server name, or the server no

Hello,
Today i tried accessing transitbux.com with mozilla, but i'm getting this kind of a error as mentioned below:
Unknown Host
Description: Unable to locate the server requested --- the server does not have a DNS entry. Perhaps there is a misspelling in the server name, or the server no longer exists. Double-check the name and try again.
Can anyone help me please, and the same website is accessible with my phone.
Help me please. :(
Regards
-

Try http://www.transitbux.com/
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"

Resolving the Server Name from a TNS Service name

Similar Messages

Maybe you are looking for