Resource semaphore troubleshoot

Hi
Resource semaphore Problem is coming in the SQL Server 2008 .... 
For this troubleshoot I am not able to do Insert and Update In the SQL Server 2008 ...
Please help...
Thank You

How can you be so sure resource semaphore wait types is causing insert and updates to fail. This is something I have never seen I have seen DML becoming slow due to semaphore waits and have found that problem lies with outdated stats or bad query/query plan.
Which One is your case ?
Semaphore waits may occur for a while but you cannot blame everything to it. Question is incomplete and cannot be answered unless you add query and wait types with error produces when it failed
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Similar Messages

  • Query Resource Semaphore Max Memory

    Hi Folks,
    I'm on SQL2005 32-bit and am suffering from memory contention problem.
    I do have AWE setup for
    10485760 kb but it doesn't seem to suffice.
    Looking at dm_exec_query_resource_semaphores I see that my queries are queue'ing up to get memory allocated.
    Now, of course the correct direction here is to fix the queries that are eating all the resources but this is a very old environment with many bad queries which have just exceeded the tipping point.
    What's interesting is that despite having 10GB awe, the column max_target_memory_kb indicates only 750MB.
    Is there any way to grant more memory to the semaphore as a temporary solution?
    Related topic http://www.mssqltips.com/sqlservertip/2827/troubleshooting-sql-server-resourcesemaphore-waittype-memory-issues.
    Thanks,
    Lucas

    Hi Folks,
    I'm on SQL2005 32-bit and am suffering from memory contention problem.
    I do have AWE setup for 10485760 kb but it doesn't seem to suffice.
    Hi,
    Can you post output of
    Select @@Version
    You have 32 bit system which has biggest limitation of memory. So things get little tricky here. Have you set max server memory, if so how much ?
    What do you mean by 'AWE setup for 10' G are you referring to max server memory as AWE set memory ?
    AWE behaves differently in 32 bit. Only Data and index pages can use memory allocated by AWE. It actually helps SQL Server to access more memory than its VAS limit.
    The biggest problem creator for resource semaphore are Sort and hash joins. Memory grant is  memory used to store temporary rows for sort and hash join and query will use this memory till it finishes and resource semaphore is responsible for providing
    this memory to query. If resource semaphore is not able to provide memory it puts request in wait list till memory is free so as I see and know only way to resolve is either increase memory or tune query
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Articles

  • FAQ: What are the best resources for Premiere Pro CS6?

    Here are high quality resources for troubleshooting and tutorials related to Premiere Pro CS6.
    Premiere Pro CS6 troubleshooting articles
    Issue: I'm having trouble downloading and installing Premiere Pro CS6. What do I do?Answer: See troubleshooting documents, post in the appropriate forum, or contact support.
    More info: http://blogs.adobe.com/aftereffects/2013/09/troubleshooting-issues-with-downloading-and-in stalling-after-effects.html
    Issue: What are the system requirements for Premiere Pro CS6?See this article: http://helpx.adobe.com/premiere-pro/system-requirements.html#Adobe%20Premiere%20Pro%20CS6% 20system%20requirements
    Issue: Why won't Premiere Pro CS6 play back AVCHD media?Answer: Update to Premiere Pro CS6 (6.0.5). Previous versions of CS6 had this issue.
    More info: http://blogs.adobe.com/premierepro/2013/08/premiere-pro-cs6-6-0-4-update.html
    Issue: Does Premiere Pro CS6 work with OS X 10.9 (Mavericks)?Answer: Yes, make sure you update to Premiere Pro CS6 (6.0.5)
    More info: http://blogs.adobe.com/premierepro/2013/10/premiere-pro-and-mac-os-x-10-9-mavericks.html
    Issue: Is there a trial available for Premiere Pro CS6?Answer: Yes, subscribe to the free version of Creative Cloud, then download the trial.
    Issue: I'm having unexpected behavior in Premiere Pro CS6 and want to trash preferences. How do I do that?Answer: See this blog post: http://blogs.adobe.com/genesisproject/2011/02/premiere-pro-cs5-maintenance-two-great-tips. html#more-537
    Issue: I'm getting errors related to QuickTime. What do I do?Answer: See this blog post for troubleshooting items related to QuickTime: http://blogs.adobe.com/aftereffects/2011/02/troubleshooting-quicktime-errors-with-after-ef fects.html
    Premiere Pro CS6 tutorials
    Issue: I'm new to Premiere Pro CS6. How do I get started?Answer: See this blog post: http://blogs.adobe.com/kevinmonahan/2011/05/20/getting-started-with-adobe-premiere-pro-cs4 -cs5-cs5-5/
    Issue: I'm switching to Premiere Pro CS6 from Final Cut Pro 7. Are there any tips for me?Answer: See this article by Scott Simmons on Pro Video Coalition: http://provideocoalition.com/ssimmons/story/105_adobe_premiere_pro_cs6_questions_answered
    Issue: I just switched to Premiere Pro CS6 from Final Cut Pro 7. Are there any missing features between the applications?Answer: See this article: http://provideocoalition.com/ssimmons/story/10_fcp_things_fcp_editors_might_be_missing_in_ adobe_premiere_pro_cs6
    Issue: Are there any good, free Premiere Pro CS6 tutorials available?Answer: See these tutorials: http://library.creativecow.net/series/Premiere-Pro-Basics-CS6--above-with-Andrew-Devis
    Issue: How do I optimize Premiere Pro CS6 for best performance?Answer: See this article: https://www.video2brain.com/en/courses/after-effects-premiere-pro-performance-workshop
    Issue: How do I operate the multicam function in Premiere Pro CS6?See this article: http://provideocoalition.com/ssimmons/story/working_with_multicam_in_adobe_premiere_pro_cs 6

    Hi ..
    GO to website www.Apache.org
    down load Apache tomcat server .
    install it ...
    Go to sun site
    c and download jsp tutorials ...
    Go to
    (www.coreservlets.com)download book core servlets
    u can find lots of nice books supported by sun on sunwebsite ...
    Now u r equipped ....
    start doing everything (R &D) on server ..
    Join This JSP forum and ask any thing u didnt got ..or learn or get confused..
    I thing once u go through this ..it will do all what u want
    Hope it helps
    Best of Luck :)
    regds & take care

  • In the middle of installing itunes an error comes up and says "Could not delete value C:\Program Files\Common Files\Apple\Mobile Device Support\CFNetwork.resources\da.lproj\from key Software\...\Folders. Verify that you have sufficient access to that key

    That comes up but I look for the file on my computer and its not even there? I've had trouble updating/installing the new itunes for the last week any help would surley be appreciated.

    Sorry I missed your post. Anyone else with the same issue should find useful resources at Troubleshooting issues with iTunes for Windows updates.
    tt2

  • HP 8750, where did my printer ink settings go?

    When I used to print in photoshop I had the option to specify paper type (satin, gloss, etc), installed ink cartridges, etc. Now I have no such options. I can print but I don't think I am getting the full color gaumet of my choice of installed carts. I tried to re-install with the HP drivers but the install hangs. I also tried to delete and add back the printer in Leopard but still I have no such settings. Has anyone been able to work through this?

    Hey MacSnoah,
    Thanks for the question. I understand that you are experiencing issues with OS X and your wireless printer. The following resource provides troubleshooting steps that may help to resolve your issue:
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/ts3147
    Thanks,
    Matt M.

  • HP ENVY H8 Series Issues w/ Drives & Explorer, and Windows

    Hello all,
    I purchased the computer brand new, and have had intermediant problems throughout its life. The wi-fi card in this computer is garbage (it is now hard-wired, being the only true solution) and the Windows installation seemed a bit buggy, but I let that slide since it may have been Microsoft's fault. (it has improved w/ updates)
    My major issues I keep constantly notice after years of installing updates is that my taskbar will disappear and windows explorer will restart at random. Additionally, I have multiple media drive ports on the front (CF, SD, xD, Pro Duo, etc) and it has been giving me issues with reading SD cards. Before my SD card is blamed, I have 4 of them and they all perform perfectly in the cameras they are in. The computer does not have problems getting data off of the card after its read it intially, but in order for it to recognize that I've inserted an SD card - I have to go into Device Manager and select the SD card under the Drives section. Once it pops up (sometimes it hesitates a few seconds before doing so), the properties window shows up with no prompting errors cited. At this point, the SD card magically appears in the Explorer window like normal. I've gotten used to this practice and have the Device Manager shortcuted to my Desktop. Yes, the LED indicator does light when the SD card is physically inserted into the slot, but the computer seems to be on deaf ears about it. Either way, these are small problems with likely Software... but I figured I'd ask since they bother me occasionally when I need to just get something off the SD card quickly or am trying to quickly print out something. It has gotten better with updates however, but these issues just simply haven't been addressed, and I feel they won't be.
    Specs:
    Windows 8.1 64-bit
    Intel i5 Processor (i5-3350P Model @ 3.10GHz)
    ~10GB RAM (per System Properties)
    1.79TB HDD, w/ 332GB Free
    Uses: Video Editing/Encoding , Occasional PC Gaming , Internet/Home Use
    Cheers,
    Joshua

    Hello @SantaFebuff69,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how your desktop computer is experiencing multiple issues related to browsing, the media card reader and Internet Explorer software. I would be happy to assist you in this matter!
    To further diagnose the issue with your browser, I recommend following the steps in this document on Resolving issues in Internet Explorer (Windows 8). This should help prevent Internet Explorer from restarting intermittently. Additionally, I also recommend following this resource on Troubleshooting Wireless Network and Internet (Windows 8).
    In regards to your computer's card reader not working correctly, I recommend following the steps in this document on Using and Troubleshooting Memory Card Readers (Windows 8).
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Directions sent from Mavericks 10.9.5 don't show up on iOS 8.3

    I just noticed today while trying to send directions from my Mac (Mavericks 10.9.5) to my iPad (3rd generation, iOS 8.3) that it doesn't show up on notifications nor in the App itself. I've tried:
    Logging out of iCloud on both devices and logging back in,
    Restarting the iPad,
    Restarting the Mac,
    Restarting Maps on iOS, and
    Using Messages and FaceTime.
    None of which worked. Is this a bug in the new itineration of iOS or is Apple no longer supporting this function on the Mavericks?

    Hey Kinan04,
    Thanks for the question. It sounds like your iPhone is not recognized in iTunes for OS X. The following resource outlines troubleshooting steps for this specific issue:
    iOS: Device not recognized in iTunes for OS X
    http://support.apple.com/kb/TS1591
    Thanks,
    Matt M.

  • Apple TV & Mid 2012 Macbook Air 11.6'' - AirPlay not working

    So I just purchased the new MBA to replace my 2010 air...which also suffers from a cracked screen. Since mirroring wont work on the old model anyways, I sold the unit and cut my loses (I was going to replace to LCD but decided it wasn't worth the effort.)
    Anyways...
    I attempted to use the MBA and the mirroring function out of the box and it worked great. Sure the mouse was a little sluggish, and the audio obviously delayed (on the MBA), but synced perfectly to the TV. I watched YouTube videos, and some other flash and HTML5 embeded content. I was prompted for an update for my Apple TV 3, and today for my MBA. After updating, and restarting both units (which I have done several times since then too), mirroring does not work as it should.
    When I select the TV usually it would adjust to a resolution higher than the MBA native resolution--but appropriate for the TV. Instead, the MBA screen goes blue, adjusts to the resolution, and then goes blue again, returning to a non mirroring mode.
    Sometimes when I do get mirroring to work--at the MBAs standard resolution--AirPlay will be "working" despite it saying that mirroring is off and greyed out.
    The biggest frustration out of all of this is that whenever I go to play a video, assuming AirPlay doesn't stop mirroring at whatever random resolution it picks (I have adjusted between a fixed and aspect appropriate setting), the AUDIO will only play through my televisions speakers, and the video will stop feeding and go back to the Apple TV home screen.
    It has done this with YouTube, HBOGO, Hulu, and a number of other video streams online.
    Has anyone else had this issue so far?
    To reiterate:
    Using mid 2012 MBA on OSX Mountain Lion
    Apple TV 3 will stream audio and mirror sometimes, but stops mirroring whenever video is played.
    AirPlay icon will remain available, but will say mirroring is unavailable / greyed despite it actually "working."

    Hey thellamaPod,
    Thanks for the question. The following resource provides troubleshooting information for AirPlay Mirroring in OS X. Usually, this may be caused by the firewall and a simple tweak of the settings should resolve your issue:
    About AirPlay Mirroring in OS X
    http://support.apple.com/kb/HT5404
    Firewall security settings
    If you use a firewall, make sure the following firewall security options have been set to allow AirPlay Mirroring to work:
    1. Choose System Preferences from the Apple menu ().
    2. Click Security & Privacy, then click Firewall.
    3. Click the lock icon to unlock it if it's locked, then type an administrator name and password.
    4. Click Firewall Options.
    5. Deselect (uncheck) the “Block all incoming connections” checkbox.
    6. Select (check) the “Automatically allow signed software to receive incoming connections” checkbox.
    Thanks,
    Matt M.

  • Please help. Trying to create external xml vidoe playlist. Desperate!

    I was given an assignment to  create and external video playlist using an xml file.  I have never used  flash before, know nothing about encoding and all that was given to the  class in terms of instuctions was a short tutorial that has no  resources for troubleshooting.  We were given everything; the external  playlist file equipped with the video skin, the video list, actionscript  that loads the xml and the xml file.  We were told that all we need to  do is change the names of the videos in the xml file to match the names  of our videos.  I did that.  We were also told we needed to "name  target", but we were not informed on how to do this.  I have tried  everything, visited every tutorial and I cannot figure out how to get  this damn thing to work.  I cannot even get flash to load the xml file.  PLEASE HELP.
    Here is the xml file:
    <?xml version = "1.0" encoding = "i-8859-1"?>
    <playlist>
    <ADogWithoutABone
    flvurl="ADogWithoutABone.flv"
    desc="Hyper Wall First Video" />
    <Highway
    flvurl="Highway.flv"
    desc="Hyper Wall Second Video" />
    <PsychoBabble
    flvurl="PsychoBabble.flv"
    desc="Hyper Wall Third Video" />
    <SomethingElse
    flvurl="SomethingElse.flv"
    desc="Hyper Wall Fourth Video" />
    </playlist>
    I tried putting in the entire address of the file location, but it did nothing.
    Here is the actionscript in the flash file:
    var xmlLoader:URLLoader = new URLLoader();
    xmlLoader.addEventListener(Event.COMPLETE, xmlLoaded);
    xmlLoader.load(new URLRequest("playlistXML.xml"));
    function xmlLoaded(event:Event):void {
    var playlistXML:XML = new XML(event.target.data);
    var item:XML;
    for each(item in playlistXML.videoname) {
    trace("item: "+item.attribute("flvurl").toXMLString());
    myPlayList.addItem({label:item.attribute("desc").toXMLString(), data:item.attribute("flvurl").toXMLString()});
    //Select the first video
    myPlayList.selectedIndex = 0;
    //And automatically play it
    myPlayScreen.play(myPlayList.selectedItem.data);
    //Add a listener to detect when new video is selected and play it
    function listListener(event:Event) {
    myPlayScreen.play(event.target.selectedItem.data);
    myPlayList.addEventListener(Event.CHANGE, listListener);
    I  tried placing the full address of the xml file in, along with the file  address of the videos, but again it did nothing.  Everything is located  in the same file, and the videos in a sub file in that file. I tried  taking out the sub file and putting all the videos in the same file, but  it did nothing.  I am sure it's something very simple, but like I said I  have NO experience with this whatsoever. I am SO lost and DESPERATELY  need help. PLEASE someone SAVE MEEEE!
    Thanks

    to parse your xml correctly use:
    function xmlLoaded(event:Event):void {
        var playlistXML:XML=new XML(event.target.data);
        var item:XML;
        for each (item in playlistXML.children()) {
            trace("node: "+item.attribute("flvurl").toXMLString());
            myPlayList.addItem({label:item.attribute("desc").toXMLString(), data:item.attribute("flvurl").toXMLString()});
        //Select the first video
        myPlayList.selectedIndex=0;
        //And automatically play it
        myPlayScreen.play(myPlayList.selectedItem.data);
    you more problems after that, though.  is myPlayList a list component?

  • Calendar flashes but won't open iOS 8.1

    when I try to open calendar, it flashes a white screen then takes me back to the home screen. Won't stay open.  Any ideas/ solutions? IPad Air

    Hey NCRob,
    Thanks for the question. I understand that you are experiencing an issue with the calendar application closing. The following resource provides troubleshooting steps for this symptom:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/ts1702
    Since the calendar application is built-in to the OS, you'll want to restore your device to reinstall the application:
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/ht1414
    Thanks,
    Matt M.

  • TS3704 Trying to delete I Tunes because of missing MSVCR80.dll followed instructions from Apple to delete - Apple Mobile Device support keeps coming up its being used I have gone to program files deleted what I can from folder but left with 3 files

    I have been getting the MSVCR80.dll missing message.
    Been on the Apple site and following instruction.
    Going down the list has instructed I have Deleted I Tunes.
    Deleted Apple Software Update
    But when I try to delete Apple Mobile device it wouldn't delete so went into program files has the instructions say by going to Program Files\common Files\Apple\Apple Mobile Device Support Folder.
    It still wouldn't delete saying it was being used. 
    I opened the file and highlighted all the folders and pressed delete, most of them have disapeared into my recycle bin but the folder still holds AppleMobileService, AppleMobileDeviceService_main.dll and MobileDevice.dll. 
    Message when I right click the first file is AppleMobileService I am told this action can't be completed because file is open in Apple Mobile Device. Close and Try again. 
    When I click the next file AppleMobileDeviceService_main dll it says  It comes up with This action cannot be completed and File description Apple Mobile Device Service. Company Apple Inc. File Version 17.323.0.9 Date Created 7/9/2013. Try again...... and finally  MobileDevice.dll come up with same message but file version 710.0.0.4 Date Created 7/9/2013 Size 902KB Both say Try Again but the same thing just recurred.
    I have left my lap top on hoping that I a swift reply.
    I am certainly no computer wizard and simply trying to follow the instructions to get rid of the box which keep coming up everytime I switch the lap top on saying APS Daemon.exe-System Error. The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem.  I had looked at the internet and there appears to be warnings not to click on the button.
    I have had an apdate from Apple for the I Tunes but it wouldn't update. I thought that may have sorted it so whilst I had a few hours I thought I would go through the process that is advised on Apple's website. 
    I hope I have not ruined my computer. I haven't even tried deleting Bonjour or Apple Application Support (I Tunes 9 or later) has these are supposed to come after the step I am on.
    Please HELP!!!!!

    Sorry I missed your post. Anyone else with the same issue should find useful resources at Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Imessage on macbook pro retina not working

    Hi, i just bought a macbook pro retina display  OS X 10.9.4 and entered the data of my applestore account on the imessage app but each time I try to send a message gives me the following sign "+54 9 11 ....... is not registered with iMessage."  although it is a registered number (my own iphone). I have no idea where to look.  Thanks a lot for your help

    Hey vero smith,
    Thanks for the question. It sounds like iMessage does not recognize your phone number as being registered. To help troubleshoot this issue, see the following resource:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Thanks,
    Matt M.

  • I have Windows 7 main library, iMac with additional library and Apple TV that I want to use home sharing, but windows library doesn't show as a computer on Apple TV.

    I have music and movie library on an external drive connected to a Windows 7 machine. I also have home movies and other content on an iMac that I use.  I want to turn on home sharing for both and connect them to Apple TV for display, music and podcast.  They are all on the same wifi home network, but the Windows library doesn't show up on the ATV device.
    I turned off all Windows firewall and I tried to configure port forwarding, but that didn't help.
    I will say that this did work at some point, so a patch or an update, or some configuration change has caused it to stop workin at some point in the past six months to a year.

    Hello, aquilinofromtuckahoe. 
    Here is the best resource for troubleshooting steps when experiencing issues with Home Sharing. 
    Troubleshooting Home Sharing
    http://support.apple.com/kb/TS2972
    Regards,
    Jason H. 

  • I get a message the message " Can not get mail. Not connected to server" Yet I am connected with Wi-fi and can access all other websites. Can you advise? My iPad is only a month old!

    Has any one experienced not being able to send mail and only receiving some? I get the message " can not get mail. No connection to the server! " Yet I get some mail but can not send out any. My iPad is only 1 month old! It worked perfectly for about 10 days.
    Thx
    Agnes

    Hey agnesfromcopenhagen k,
    Thanks for the question. I understand you are experiencing issues with Mail on your iPad. The following resource provides some troubleshooting steps. What kind of account are you using? Some internet providers require that you be connected to your home Wi-Fi (or for work accounts, inside your corporate Wi-Fi/firewall). Also, some email accounts require two-step authentication. For more information, see this resource:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/TS3899
    Thanks,
    Matt M.

  • HT3529 My group messaging on/off label isn't showing up at all. I can only create group messages but every time someone starts a group chat it says its send to my number but I never got any text. I wen't to settings Messages and I can't find any on/off sw

    I can only create group messages but every time someone starts a group chat it says its send to my number but I never got any text. I wen't to settings>Messages and I can't find any on/off switch.

    Hello there, Idaniabb.
    The following Knowledge Base article offers up some great information in regards to group messaging and also links to another excellent resource for troubleshooting messages as well:
    iOS: Understanding group messaging
    http://support.apple.com/kb/HT5760
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

Maybe you are looking for