RESOURSE MANAGER

hi ,
if i face any problem after setting some resource values by using database resource manager, Where i can find it logs...

Hi,
You can refer
V$RSRC_CONSUMER_GROUP - user sessions which are utilizing the resources
- Pavan Kumar N
Oracle 9i/10g - OCP
http://oracleinternals.blogspot.com/

Similar Messages

  • Solaris 10 Resourse Managment

    Hi
    /dev/dsk/c0t0d0s6 20845393 20689 20616251 1% /sapqas-zone
    /dev/dsk/c0t0d0s5 21546553 308397 21022691 2% /sapdev-zone
    root@Domain-C # psrinfo
    128 on-line since 09/28/2006 15:44:50
    129 on-line since 09/28/2006 15:44:51
    130 on-line since 09/28/2006 15:44:51
    131 on-line since 09/28/2006 15:44:51
    132 on-line since 09/28/2006 15:44:51
    133 on-line since 09/28/2006 15:44:51
    134 on-line since 09/28/2006 15:44:51
    135 on-line since
    09/28/2006 15:44:51
    root@Domain-C #
    Memory is 16GB and Global Swap is 50gb
    Now I want to share these Resources Equally in two Zones..
    Pls let me know the Procedures???
    Thanx in advance..
    Regards..Raj

    You can create resource pools with 4 CPUs each and assign one pool to one zone and other to the second zone.
    You can not partition memory as of now.

  • Personnel Area

    Hi friends,
    I need to create a new personner area for a exisisted company code, please let me know all the configuration steps for this.
    Please respond me as soon as posible, answers will be rewarded with great points.
    Thanks in advance,
    Naga

    Hi Naga Mani,
    Steps tp create Personnel Areas
    Go to IMG-->Enterprise Structure >Definition>Human Resourse Management-->Personnel Areas( Create Your Personnel Area here) Then to Assign Follow the below steps...
    Steps to Assign PA to CC
    Go to IMG-->Enterprise Structure >Assignment>Human Resource Management-->Assignment of Personnel Area to Company Code.
    Hope this solve ur issue....if any thing let me know....
    Regards,
    Raghu Kumar

  • Limit on the serverprograms

    Is there any parameter which controls number of server programs which can run simultaneously? We need to run few programs from an external server at same time but whenever I am monitoring the smgw, I can see only one as registered server program.

    Hi Anto,
    controlling the registered server programs in gateway
    As I said before the gateway does not work based on the registered programs running, but rather on the amount of connections.
    Resourse Management parameters are detailed here,
    http://help.sap.com/saphelp_nw04/helpdata/en/80/ee67f9591c442b98b6c81059fb552d/frameset.htm
    Based on default parameters you can have hudreds of active connections at a time, so parallelism shouldnt be an issue.
    Regards
    Juan

  • Running java program as a server

    Please advise of what's difference in running java program with -server option and just runing it like java program1?
    Thx

    -server option uses the server VM for the program and if you use -client it will be run using client VM. Default is client.
    The main difference is the optimations. When you are running with -client option the program is optimized to startup faster and to give better response times.
    -server option optimizes for better resourse management which is important than start up time in server systems

  • Contract Management, Resourse Related Billing and Revenue Recongnisation

    Dear SAP Experts,
    Can someone help to provide me in  details such as configuration step by steps, Billing types, Billing plan with T. Codes  about the below.
    Contract - Service/Maintainace Contract, Quantity and Value contract configuration and billing document type with Transaction codes.
    Configuration steps for Resourse related billing
    Configuration steps for Revenue Recongnisation and Billing plan. This is urgent.
    best regards
    Nain Chand

    hi,
    The Price of a Customer-specific services are not determined by Standard Prices .
    For example
    Make to order production
    Plant maintenace
    Resource related Billing is used in the CUSTOMER SERVICE and PROJECT SYSTEMS
    We use the RRB process to bill the customer for the Material consumed and the Costs incurred in the customer project.
    The flow is
    Create the Sales order in VA01 which has the DIP profile assigned
    Now Using the Sales order create the BILLING REQUEST in DP91
    now create the Billing document in VF01 using hte Billing request in DP91
    VA01DP91VF01
    this is the flow
    Please check and revet.
    regards,
    santosh

  • How to Manage the Resource Master in Primavera Enterprise Version

    We are using P6 enterprise version in our company having a central database. We had created our own unique resources and standardised across the enterprise and is Admin protected. However we often have to import some schedules sent by our consultant/client. In those schedules they have their own resources.
    So when we import these schedules, it also imports the resources along with it and pollutes our resource master.
    Can anyone let me know, how to manage such a situation.
    Regards

    We have met this issue. You have few ways to deal with it, but each has its own +ve and -ve.
    1- You may create a separate "Working" db into which you can import those files and keep them there only. Your master db shall be used for maters and your own program only.
    2- You may do the same for checking the resourses, vet them before importing into the final db
    3- P3 and MSP importation allows you to select the node to which the resources will be located. We have created a resource node called "Imported Resources" and dumped all those resources into it. Our users don't have access to that node so those resources can only be used on the imported program and can't be assigned to any other program / activity
    4- Enforce your supply chain to use the same resource list. We managed to do that for our main and subcontractors. That formed part of their contracts.

  • Can not login access manager

    mail server version is JES messaging Server 6 2005Q4 :
    My Access Manager:http://hostname:8080/amserver
    last week, i login access manager, under the web label or configuration label�F
    in "ldap" item�Ci add new dc=xx,dc=xx,dc=xx�C
    then save configuration.
    but after that i can not login access manager.
    when i user admin login,it print:"
    Authentication failed".
    what should i do to restore access manage?
    thanks!

    javatoall wrote:
    Hi,
    I login Access Manager, access sample "realm" -> Authentication->
    Advance Properties -> User profiles and then I choiced "Dynamic with user Alias".
    Then I only configure JDBC authentication with mysql database that I don't used ldapservice.
    When I created a one new user in MySQL, I can login into web application that i security as "sample.war" successfull but new user don't right access resource that i protected before.
    When i login access manager with amdmin user, I can not find user that i has been created it in MySQL database. t
    When the users are created through the dynamic profile, the default cn/sn are set to "default" , after creation you need to login to amconsole as amadmin and change/add proper values for these attributes.
    Alternatively you can set the protected resource's policy subject to Authenticated users. This will work but not sure will meet your requirement
    >
    When i login access manager console with new user, it login successful, and view Profile of new user that I has been created.
    Can you tell me How to manage new user that I has been new in MySQL by Access manager console ?
    I want to configure access proteced resourse for that user. How to configure that ?
    read above use the authenticated users subject
    Thank for every help.
    VinhND.

  • Training and Event Management Integration with FICO

    How Training & Event Management is integrated with FICO?
    How it will be integrated and where?
    Could you please put it in simple way?

    Hi Rajesh,
    Cost allocation:
    Here it is possible to charge an employeeu2019s cost center with the fee for attending a business event (e.g. training course, workshop). The business event organizeru2019s cost center will be credited and the attendeeu2019s cost center will be debited.
    Crediting of the senderu2019s cost center  Debiting of the recipientu2019s cost center
    The costs incurred from actually holding a business event can be transferred from the resources cost center to the business event organizeru2019s cost.
    Crediting of the senderu2019s cost center  Debiting of the recipientu2019s cost center
    In SAP Configuration:
    Training and Event Management > Integration->Billing and activity Allocation-->Activity Allocation and cost transfer posting.
    Please do above configuration and create business events with or without resourses, in that you can maintain cost centre to post the expenditures .
    Bhairavareddy

  • Cost(vprs) of free goods with batch managment

    Dear Gurus,
    I have a problem ahout free goods with batch management.
    Cost(VPRS) is not accumulated in billing(free goods is not relevant for billing).
    My configurations are shown as below:
    Ordered goods (and batch) item category :zta1(copied from tan)
    Free goods (and batch) item category :zann (copied from tann) pricing:B ;not relevant for billing;dermination cost:X
    copy control(from delivery to billing):
    ztan: accumulation cost :X
    If I use the material without batch management,Cost of free goods(without batch) is accumulated to main item(ordered goods).
    So, what can I do?
    Thanks and Best Regards,
    Lykin Kan

    Hi,
    These notes are useful:
    SAP Note 1365939 - VPRS logic and Customizing settings in SD
    SAP Note 547570 - FAQ: VPRS in pricing
    If you have the problem in the transfer from SD conditions to CO-PA, check if you transfer only invoices to COPA, if you don't invoice the deliveries of free goods, then you don't transfer this 'sales' or costs of 'gifts' to COPA. You can check the customizing of COPA in tcode ORKE (IMG for COPA). SAP Note 74486 - INFO: Overview of consulting notes for CO-PA is a good summary about this issue.
    I hope this helps you
    Regards,
    Eduardo
    PD: I forgot SAP Note Number 33968 SD/CO-PA: Characteristics from sales doc tables
    Edited by: E_Hinojosa on Sep 10, 2010 9:44 AM

  • Can not refresh server manager Error:0x8007045b

    OS: Windows 2012 R2 Core
    Services: Hyper V
    I was trying to remote reboot and the session hung. No worries I decided I could just reboot the next morning. So I rebooted the next day but when I go into server manager I get
    an errror can not refresh server manager Error:0x8007045b. Did some research found suggestions to fix it using a DISM.exe /Online /Cleanup-image /Restorehealth.
    But then I get an error 1115 A system Shutdown is in progress. I attempt to fix this issue using pskill winlogon but the issue pursistest. I have restarted the server several times now. Not sure how to fix this.
    Thanks in advance,
    Jake

    Hi,
    In addition to the above information,
    Checkout the below thread for similar discussion,
    http://social.technet.microsoft.com/forums/windowsserver/en-US/a700e9f6-4491-4c70-8bd0-d9d3111e2f70/windows-reboot-error
    Regards,
    Gopi
    JiJi
    Technologies

  • Adobe cloud tries to load addon which I have deleted in Extension manager

    when Adobe Cloud starts it tries to load an application (Edge FX lite) that I have deleted in Adobe Extension Manager cc. I get the error message ' unable to install the addon EdgeFX lite  error 603. How do I stop this?
    Also in Adobe Exchange in 'My Stuff'  there are showing addons which I have removed in Adobe extension Manager cc which I would like to be removed from this listing as I will never use them, but if I right click to uninstall I fail to get rid of them.

    Apologies, without making the assumption that you are signed in
    1) Go to https://creative.adobe.com/addons/
    2) In the top right hand corner select sign in and enter your Adobe ID and password
    3) Once logged in, on the center of the screen at the left hand side, select the link 'All your purchases and shared items'
    4) You will then be taken to a page that is the equivalent of your My Stuff panel.
    5) You can then install individual add-ons/extensions.
    Kind regards,
    Lea

  • Manager Heirarchy is not getting displayed in P&L Dashboard

    Hi All,
    I have implemented the P&L Dashboard for Financials. Suddenly, It is not displaying the Manager Heirarchy in the Manager Parameter in the P&L Dashboard.
    Did anyone faced the same kind of problem, please throw some light.
    Regards,
    Chandana

    Hi,
    Thank you All.
    Regards,
    Shruti B.

  • Data is not getting displayed in Management Console.

    Hi Experts,
    I am using BPC 7.5(M) SP04, Web server as IIS 7.0 and database server as SQL Server 2008 in Multi Server environment, Web Server is on Application Server (Windows Server 2008) and database server is on different machine.
    I have configured the ODBC logging as documented in the install guide section : Setting Up ODBC Logging in IIS 7.0 for the Default Web Site and records are there in BPClog table of Appserver database but when I try to see data in Management console it doesn't show any data eg: It doesn't show any data after clicking  "Who's Online" link under WebServer section of management console.
    Do I need to do some more settings for getting the records display in Management Console.
    Please Advice.
    Thanks & Regards,
    Rohit

    Hi Roberto,
    I have gone through the OPS guide but still "Who is Online" link of management console is not showing any data, I tried giving date range in Start date/end date fields and clicked on "Reload" button but it gives error message:
    LOGIN FAILED FOR USER 'NT AUTHORITY\ANONYMOUS LOGON'
    Please Advice.
    Thanks & Regards,
    Rohit

  • Manage-bde command is not generating recovery key on network location

    Hi,
    I am trying to save the recovery key to the network share location and start up key in the USB drive while enabling bit locker.When the OS drive gets encrypted, the default folder for recovery password shows that it contains 1 file but not getting anything
    inside it when i checked the properties of the folder.
    i have already changed the group policy as "choose default folder for recovery password".
    I am using the command to enable the bit-locker as "manage-bde.exe -on C: -rk
    <network location to save recovery key> -sk <location of the USB drive>
    -rp to enable the bit-locker. It is generating the start up key in the USB but not the recovery key on network share.
    Can anyone suggest what i am missing or what else i should do to generate the recovery key on network share.
    Does manage-bde process be able to save the recovery key on network share or it hand over to some other process to perform this task.
    Thanks
    Gaurav Ranjan

    I got you Manoj, but I want to ask you one think that what if i lost the startup  key or my USB stick. I have my recovery key on the network share.  In order to log-in my machine I need the recovery password. From where i will get the recovery
    password(48 digit). Surely from the recovery key on the network share. So how can i get the recovery password if only we have the recovery key.
    I know both are different in context. Both are two different thing. I have lost my USB stick along with the recovery password and I have to log-in my machine. How can i do that i want to know that. Do there is any method to get recovery password from the
    recovery key on network share. I have retrieved the recovery password when the recovery key in AD. But this time it is on network share.
    Also one think which I need to solve is that the manage-bde -protectors -add command creates a new .bek file along with the older one. So the .bek file which get shown at the time of the start up of the machine is different from that stored in the network.
    So i am getting confused as which .bek file is for which machine and hard to retrieve the password.
    Is there any method to store recovery key on network without the -protectors -add command line so that both the .bek file should be matched and can easily be known for indiviual machine in an OU. As if both the .bek files will be different it would be difficult
    to to retrieve the recovery password for the machines.
    Please do inform if you need some more information about the scenario if i missed something.
    Thanks
    Gaurav Ranjan

Maybe you are looking for