Response message timed out - JDBC adapter - PI 7.1

Hi All,
I have a synchronous Proxy <-> XI <-> JDBC scenario. The interface works fine in most of the cases, but when my proxy sends data to UPDATE the receiver SQL server 2000 with more than 1000 records, I do not find the response message in SXMB_MONI. But all the records have been successfully updated in SQL database. The response message in my case is the number of records that have been updated.
Initially I got the message "Synchronous response expired" in RWB, and based on SAP note 791379 and 1078420 , I changed the xiadapter.inbound.timeout.default parameter from 180000 to 600000 and added the parameter 'sqlquerytimeout' in my receiver JDBC adapter configuration with value as 600 seconds.
I have also enabled batch mode in my receiver adapter.
Now my problem is I don't see any error message in RWB , but still in SXMB_MONI I am not able the response message, but can see only the log version of my request message.
Any idea on what needs to be done in this case ? Any help will be greatly appreciated.
Regards,
Sandeep

Hello,
Could you pease let us know how thiswas solved ?
Same problem i am having.
Thanks in advance

Similar Messages

Error while invoking bean "delivery": Waiting for response has timed out.

Hello,
I am running a process that currently catches an exception from a partnerlink. When the exception is caught I send an email and the process exits. When I submit a request from the BPEL console, I have to wait until the JTA timeout before the page returns. However, the instance completes successfully and I receive the email before the timeout happens. This is what I see in the logs. When I look at the audit and activity flow, all of the activities were timestamped prior to the exception being thrown. Has anyone seen this behavior or know what is going on. Is there a problem sending email in a catch or catchAll block?
<2009-04-19 22:33:41,859> <ERROR> <iCareTest.collaxa.cube> <BaseCubeSessionBean::logError> Error while invoking bean "delivery": Waiting for response has timed out. The conversation id is cf9324c9be114336:513ede58:120c17e1922:-7fc0. Please check the process instance for detail.
com.oracle.bpel.client.delivery.ReceiveTimeOutException: Waiting for response has timed out. The conversation id is cf9324c9be114336:513ede58:120c17e1922:-7fc0. Please check the process instance for detail.
Thanks in advance
Jim

There is no issue the reason why it times out is because you don't have a reply back to the client in your catch all.
If you look at your process you will see that the defaul reply is in the main scope. When the catch all is invoked this reply is by passed, therefore no reply is sent.
PLease a reply in your catch all back to the client and it will work.
cheers
James

Just bought a new Macbook Air (and a new to Mac) and having trouble connecting to home hub. Hub can be found yet when I enter my password, I receive the message "timed out". Can anyone help me?

Just bought a new Macbook Air (and a new to Mac) and having trouble connecting to home hub. Hub can be found yet when I enter my password, I receive the message "timed out". Can anyone help me?
G

Go into your router's page and disable password protection and try connecting again.

Waiting for response has timed out and Bad response: 401 Access denied

Hi,
I am using a partner link to invoke a wsdl.This wsdl I am downloading from server after giving the username and password details.
So while invoking it i m providing the credentials details in bpel.xml file .
<property name="httpBasicHeaders">
<property name="httpBasicUsername">
<property name="httpBasicPassword">
After providing this details also I am getting error .
<faultstring>com.oracle.bpel.client.delivery.ReceiveTimeOutException: Waiting for response has timed out. The conversation id is 11d1def534ea1be0:-3d858514:1209f42a251:-7da8. Please check the process instance for detail.</faultstring>
</Fault>
On cheking to audit instance i m getting the below error:
exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 401 Access denied
Plz help me out asap.
Thnaks

can you please post you bpel.xml file the setting for basic authentication should be as follows. It is unclear if this is how you have it or you posted a subset of the bpel.xml.
<property name="httpBasicHeaders">credentials</property>
<property name="httpBasicUsername">your_username</property>
<property name="httpBasicPassword">your_password</property>
looking at the error it looks like you have given the wrong credentials.
cheers
James

Retrieved file is blank. Also get an error message timing out.

Use Dreamweaver CS3. Retrieved file is blank. Tried passive, nothing happened. also got error message timing out. My web master can connect with the website with his computer. He tried to fix mine but can't figure it out why the file is blank.

PHP files are code view only. To work with PHP files locally, you must install a local testing server on your computer and define it in your DW Site Definition.
WAMP for Windows
http://www.wampserver.com/en/
XAMPP for Windows
http://www.apachefriends.org/en/xampp-windows.html
XAMPP for Mac
http://www.apachefriends.org/en/xampp-macosx.html
MAMP for Mac
http://www.mamp.info/en/downloads/index.html
Setting up a PHP environment in Dreamweaver
http://www.adobe.com/devnet/dreamweaver/articles/setup_php.html
Building your first dynamic website – Part 1: Setting up your site and database connection
http://www.adobe.com/devnet/dreamweaver/articles/first_dynamic_site_pt1.html
Nancy O.

We are getting LDAP response read timed out, timeout used:15000ms oid ovd

Hi All,
We are having this in prod environment
We are getting a lot of these:
2012-09-12 14:43:52,097 [[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR NamingException: [LDAP: error code 1 - LDAP Error 1 : LDAP response read timed out, timeout used:15000ms.]
2012-09-12 14:44:24,720 [[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR NamingException: [LDAP: error code 1 - LDAP Error 1 : LDAP response read timed out, timeout used:15000ms.]
2012-09-12 15:09:57,206 [[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR NamingException: [LDAP: error code 1 - LDAP Error 1 : LDAP response read timed out, timeout used:15000ms.]
2012-09-12 15:25:12,029 [[ACTIVE] ExecuteThread: '23' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR NamingException: [LDAP: error code 1 - LDAP Error 1 : LDAP response read timed out, timeout used:15000ms.]
OID/OVD is apparently not doing well!
Regards,
PraveenSharma

Hi,
OID log:
[2012-09-12T11:27:24+02:00] [OID] [NOTIFICATION:16] [] [OIDLDAPD] [host: br2lfauth2p.intern.uc.se] [pid: 26857] [tid: 8] [ecid: 004mNrBiy2p9Pdw6wFnZ6G0006Zd007WLb,0] ServerWorker (REG):[[
BEGIN
ConnID:1076930 mesgID:915 OpID:914 OpName:modrdn ConnIP:::ffff:172.30.18.198 ConnDN:cn=oam,ou=ucsystemaccounts,dc=uc,dc=se
[gsldmda_ModifyDN]:ORA-60 ORA-00060: deadlock detected while waiting for resource
ORA-06512: at line 1
encountered
END
Regards,
PraveenSharma

Messages are in hold state due to one message at receiver JDBC adapter

Hello,
I am using a receiver JDBC adapter and trying to send an XML file which has an insert query to insert some data into the database i.e., Oracle 9i.
Here at the receiver side due to one message ( which is in to be delivered state) all other messages are got hold and waiting for long time.
I am getting the exceptions as this,
JDBC Adapter processing failed with Error processing request in sax parser: Error when executing statement for table/stored proc. 'FSASMGR.XTBL_KL06_IINQUIRY' (structure 'REC01'): java.sql.SQLException: ORA-12899: value too large for column "FSASMGR"."XTBL_KL06_IINQUIRY"."CASE_TITLE" (actual: 81, maximum: 80)
Exception caught when executing statement for table/stored proc. 'FSASMGR.XTBL_KL01_ISTAFF_MST' (structure 'REC1'):
java.sql.SQLException: ORA-00001: unique constraint (FSASMGR.XTBL_KL01_ISTAFF_MST) violated
Can anyone help me out in solving this issue.
THanks,
Soorya

hi surya,
jdbc channel tries a request for n number of times(no of rettries),if that request fails it will take up the following requests,its not like it will process a request forever.
to be delivered will be resulting if reciever is down or network between XI and database server is bad.
try to ping databse server from XI host system.
if everything is fine then look at the channel configuration->advanced->no of retries of database transaction on sql server.
just redue the count to 1 and recheck.
Regards,
rama Krishna

Resent successful message failed at JDBC adapter

Hello,
I have successfully configured scenario IDOC to JDBC.
Now I have one issue that if my message passes successfully from SAP XI and get stuck at JDBC adapter (not reached to database bcoz of any reason like server is shutdown, etc).
I need to resent this message when oracle server problem is solved.
Can I resent the message which is passed successfully thru XI and stucked at Adpater side?

Hi,
If the channel is inactive , it will error out in Integration Engine itself, so u can restart those messages manually.
Also, lets say the receiver system is not reachable(example JDBC), then what happens? You can find those messages in
http://host:port/MessagingSystem/monitor/monitor.jsp . In the window left frame choose Received Messages , in the right frame choose Status Not Delivered. Change the time frame and click tab(there is no enter) , u can find list of messages. Now for each message u can find two options Delete, Re-Deliver ,click on Re-Deliver the message, it will go thru.
Regards
Seshagiri

Getting an error message, "timed out trying to establish a connection to server" , trying to open a video on website

cannot connect to MLB.com video of game with firefox, but can with internet explorer. Also same thing when trying to view video at NY Giants.com

Hello.
It's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.
If the problem is not disappears when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.

Timed out, server application never registered to receive message

Hello. So, It's been a while since I last used iMovie, and now I'm having a very difficult time of it sharing to anything or even saving a version to disk. It won't even save to Theater! Each time I do, it gives me the exact same cryptic message: ""timed out, server application never registered to receive message" - and that's even when saving to disc, and not saving to ANY exterior source.
Since I can't find any mention of this message on Google or Duck Duck Go, I am calling upon alla y'all. So, the details on my system:
Macbook Pro, 13-inch (early 2011)
2.3 GHz Intel Core i5
4 GB 1333 MHz DDR3
318 gigs of storage, and yeah, it's about 3.8 gigs left, even with an 500 gig external hard drive running concurrently..
Version of iMovie is 10.0.6.

I am experiencing the same issue and it's getting annoying. I can't logout or shutdown normally.
iMac, 24 inch, 2 GB RAM, 10.5.7, 500 GB drive with lotsa space left.
Here is the message in system.log when I try to logout and the dock stays as described above:
Jul 30 09:17:40 new-host loginwindow761: ERROR | WSActivateApp | SetFrontProcess({0, 1655188}) returned error -600. Unable to activate process.
Have tried the same fixes as above (repair disk, repair permissions, archive & install). No joy. Any ideas? Thanks!

Tuxedo 6.5 Timed out error is locking up the server

Hello all,
I am hoping someone will be able to help me with my problem.
When a client tries some updates using our software, they get the following error
message:
"Timed out waiting for server to acknowledge attention"
Any subsequent processing on this server causes the following messages:
"Attempt to initiate a new SQL Server operation with results pending"
"Unable to Rollback() monitor:'AmsDatabaseConnection'! due to unknown exception!"
"Cannot perform more than one read"
As best as I can tell (which could be wrong), this only occurs to specific clients
that have to go through a firewall. However once those clients encounter the
original problem, everyone is affected.
I don't what is causing the problem. The only way I am able to "fix" the problem
is by restarting the servers. Is there a way for tuxedo to clean up these processes?
Under tmadmin on the server, there is nothing running on the offending servers,
there are no messages in the queue. I do not know what could be the problem.
I have added the -K both flag to the WSL, and I have also added the -N flag to
the WSL, I have also increased the BLOCKTIME to allow the client processes more
time to work. HOwever, none of these changes seem to work.
In the client's ULOG are the following messages:
1065 ERROR: Unable to close WSH connection
1025 ERROR: Unable to send tpterm() request
Any help or suggestions would be greatly appreciated, as I have been pulling my
hair out trying to figure this out.
- Ted

Ted,
The error you posted below is not a Tuxedo error. It is your application error, in
response to some Tuxedo error code, I would imagine.
The WSL has a -K option to turn on Keepalive at the network level. This can keep a
firewall from disconnecting due to lack of traffic.
The SQL errors are from the sequence of operations that your are executing from
your application code. Unless you are using transactions, the database can not
distinguish one service request from the next. The database simply receives a
comtinuing series of requests. It looks like it never cleaned up from the previous
service call.
As Wayne suggested, TMTRACE might show you the sequence of Tuxedo operations
interleaved with your application errors, so that you can better track down what
has happened.
Scott Orshan
Ted Unnikumaran wrote:
Hello all,
I am hoping someone will be able to help me with my problem.
When a client tries some updates using our software, they get the following error
message:
"Timed out waiting for server to acknowledge attention"
Any subsequent processing on this server causes the following messages:
"Attempt to initiate a new SQL Server operation with results pending"
"Unable to Rollback() monitor:'AmsDatabaseConnection'! due to unknown exception!"
"Cannot perform more than one read"
As best as I can tell (which could be wrong), this only occurs to specific clients
that have to go through a firewall. However once those clients encounter the
original problem, everyone is affected.
I don't what is causing the problem. The only way I am able to "fix" the problem
is by restarting the servers. Is there a way for tuxedo to clean up these processes?
Under tmadmin on the server, there is nothing running on the offending servers,
there are no messages in the queue. I do not know what could be the problem.
I have added the -K both flag to the WSL, and I have also added the -N flag to
the WSL, I have also increased the BLOCKTIME to allow the client processes more
time to work. HOwever, none of these changes seem to work.
In the client's ULOG are the following messages:
1065 ERROR: Unable to close WSH connection
1025 ERROR: Unable to send tpterm() request
Any help or suggestions would be greatly appreciated, as I have been pulling my
hair out trying to figure this out.
- Ted

I have tried to rent a movie in iTunes twice in the last few hours, both times it says my session has timed out. I was browsing to begin with, but then tried closing iTunes

I have tried to rent a movie in iTunes twice in the last few hours. First I was browsing then tried to rent and was told my session had timed out. I closed iTunes and went directly to rent the specific movie and still the same response, session timed out. I completely logged out of iTunes, tried again 5 hours later, still the same timed out response. I have successfully rented, downloaded movies and watched them previously. Any similiar issues for anyone lately? Any ideas why this is happening?

Try to disable the camera notification: http://support.apple.com/kb/TS1500
and make sure that Apple Mobile Device Service is active on your computer: http://support.apple.com/kb/TS1567

JDBC Adapter-XML Document Name

I am working on XI 2.0 and need to change the XML document name I am receiving from an inbound JDBC adapter. The document I am receiving is:
<resultset>
<row>
    <col1>ABC</col1>
    <col2>123</col2>
</row>
</resultset>
I want to receive:
<MyDocumentName>
<row>
    <col1>ABC</col1>
    <col2>123</col2>
</row>
</MyDocumentName>
Does anyone know how to override the default "resultset" name from the JDBC adapter??? The reason I need to do this is because my message mapping does not work properly unless I have the Message type of the message from my JDBC adapter as "resultset".
Thanks for your help!
Dan Pettingill

(Note: I work with Dan Pettingill, the starter of this thread)
I decompiled the class Renato suggested, but I don't
think that's going to be the solution. The DB2XMBProcesser is dependent on XI properly setting the properties values for the jdbc adapter. DB2XMBProcesser will use a property named "db.documentname" to set the name of the root node of the DB2 results. If no such property is defined, the default value of resultSet is used.
[documentName = getParaWithDefault("db.documentName", "resultset");]
Our problem seems to be that XI is not passing along the parameters we define in the adapter configuration. We've tried numerous combinations and names, but they never take.
The only way we can get XI to recognize that we are sending in a documentName parm is to call it "docName". Any other name is essentially ignored (including db.documentname, documentname, XMB.docName, and a lot of other permutations as well).
But here is the log from that adapter when we do so. Not that it sees the value we're setting, but it won't set the documentname parm going to the jdbc.
2004-08-31 17:33:45 : jdbcListener
Raw configuration data ***
Transport protocol: JDBC, version
Message protocol: JDBC, version
pollInterval|301
additionalParameters|true
jdbcDriver|com.ibm.db2.jcc.DB2Driver
retryInterval|null
dbpassword|***
queryStatement|SELECT * FROM RBPRDB.T1256;
queueName|null
autoCommit|false
updateStatement|Delete from RBPRDB.T1256 Where GUID Is Not Null;
dbdisconnect|false
dbuser|r50445
adapterStatus|active
isolationLevel|2
addParameterParams|*** TABLE , 2 ROWS DEFINED ***
addParameterParams|addParameterParams$0$addParameterParamName$docNamespace
addParameterParams|addParameterParams$0$addParameterParamValue$urn:freescale.com
/xi/db2-ims/wms
addParameterParams|addParameterParams$1$addParameterParamName$docName
addParameterParams|addParameterParams$1$addParameterParamValue$SelectAckQueue
pollIntervalMsecs|null
execute|null
connectionURL|jdbc:db2://WACCTSO.sps.mot.com:9003/WACCDB2T
qualityOfService|EO
Used configuration data ***
'MessageProtocol': 'JDBC'
'adapterStatus': 'active'
'addParameterParams.dbEncoding': ''
'addParameterParams.docName': 'SelectAckQueue'
'addParameterParams.docNamespace': 'urn:freescale.com/xi/db2-ims/wms'
'addParameterParams.docNamespaceScope': 'root'
'additionalParameters': 'true'
'autoCommit': 'false'
'connectionURL': 'jdbc:db2://WACCTSO.sps.mot.com:9003/WACCDB2T'
'dbdisconnect': 'false'
'dbencoding': ''
'dbpassword': '***'
'dbuser': 'r50445'
'documentname': 'resultset'
'documentnamespace': ''
'execute': ''
'isolationLevel': '2'
'jdbcDriver': 'com.ibm.db2.jcc.DB2Driver'
'pollInterval': '301'
'pollIntervalMsecs': '0'
'qualityOfService': 'EO'
'queryStatement': 'SELECT * FROM RBPRDB.T1256;'
'retryInterval': '301'
'updateStatement': 'Delete from RBPRDB.T1256 Where GUID Is Not Null;'
OK - initialized

NCHAR issue with oracle database using JDBC adapter

Hi,
We have a requirement to develop an XI interface from FTP server(File adapter) to oracle database using JDBC adapter. In the oracle database table few fields are of type NCHAR/NVARCHAR. when we try to insert the character(A,B,c..) values into oracle table fields of type NCHAR/NVARCHAR, we are getting the following error message in the JDBC adapter audit log. IF we pass the numeric value to the same field, then we are able to insert the records successfully.
Unable to execute statement for table or stored procedure. 'IPCSDD_DOWNLOAD_PROCESS' (Structure 'StatementName1') due to java.sql.SQLException: ORA-00904: "P": invalid identifier
2010-10-19 22:29:59 Error JDBC message processing failed; reason Error processing request in sax parser: Error when executing statement for table/stored proc. 'IPCSDD_DOWNLOAD_PROCESS' (structure 'StatementName1'): java.sql.SQLException: ORA-00904: "P": invalid identifier
2010-10-19 22:29:59 Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'IPCSDD_DOWNLOAD_PROCESS' (structure 'StatementName1'): java.sql.SQLException: ORA-00904: "P": invalid identifier
Please find the system information below.
Oracle version- 10.2.4
XI version - 3.0/ service pack 19
JDBC driver- oracle.jdbc.driver.OracleDriver
Please suggest.
Thanks,
Venkata
Edited by: Venkata Narayana Eepuri on Oct 21, 2010 12:10 AM

Dear Venkata Narayana,
Concerning the error, kindly go through the following note :
731 - Collective note: ORA-00904
follow the recommendations mentioned in that and please check if that helps.
Best Regards
Nishwanth

Timed Out during sync.

All too often when I am trying to sync/dowlnoad some music from my WIndows PC to my iPod Touch, I get an error message "Timed Out"; this sync could not be completed. This can happen within a few Seconds of the Sync starting, so I cannot have used excessive time. What it going on? What am I doing wrong? and how can I stop this happening?

Did you check your security software settings? See this article: http://support.apple.com/kb/TS3125

Response message timed out - JDBC adapter - PI 7.1

Similar Messages

Maybe you are looking for