Responsibility would not show after assigning to users

I'm having a serious issue. Whenever i assign responsibilities to users, it doesn't reflect in their list of responsibility. What do i do?

Hi;
What is your OS and EBS?
Did you try to run below CM:
- "Sync responsibility role data into the WF table."
- "Synchronize WF LOCAL tables"
- "Workflow Directory Services User/Role Validation"
If no,please run those and retest issue
Regard
Helios

Similar Messages

Loading Textual Data from HttpService Would Not Show Up on TextArea

Hi,
I have something fairly strange here that I have a little problem getting it to work. I am loading some data from XML and attempt to format it a little more on Actiosncript and print it out on the TextArea. For some reason, it would not show up, even though when I used Alert.show it does spit out the entire xml data set. Based on this, I know my data has been loaded correctly, but I am not sure why it is not showing up on my page.
Here is the code,
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
    <mx:states>
        <mx:State name="view">
          <mx:RemoveChild target="{intro}"/>
            <mx:AddChild relativeTo="{applicationcontrolbar1}" position="before">
                <mx:TextArea editable="false" id="viewText" width="450" height="279" text="{messageInfo}"/>
            </mx:AddChild>
        </mx:State>
    </mx:states>
    <mx:Script>
        <![CDATA[
            import mx.events.ItemClickEvent;
            import mx.controls.Alert;
            import mx.rpc.events.ResultEvent;
            import mx.rpc.events.FaultEvent;
            [Bindable]private var message:XMLList;
            [Bindable]private var messageInfo:XMLList;
            private var savedIndex:int = 99999;
   private function clickHandler(event:ItemClickEvent):void {
                if (event.index == savedIndex) {
                    //don't do a thing
                else {
                    savedIndex = event.index;
                      navigateToURL(new URLRequest("../"+ event.item.data));
            private function toggleButtonBar_itemClick(evt:ItemClickEvent):void {
                currentState = evt.item.data;
                if(evt.item.data == "view") view();
           private function view():void{
              currentState="view";
              userView.send();
           private function httpService_fault(evt:FaultEvent):void {
                var title:String = evt.type + " (" + evt.fault.faultCode + ")";
                var text:String = evt.fault.faultString;
                Alert.show("There is an error! Type " + title + " " + text);
           private function httpService_result(evt:ResultEvent):void {
                messageInfo = XML(evt.result).messages.message;
                Alert.show(messageInfo);
                message = XML(evt.result);
                var message_name:String = "";
                var message_phone:String = "";
    for each (var message:XML in messageInfo.messages.message) {
          viewText.text += "Name " + messageInfo.name + "\n";
          viewText.text += "Phone " + messageInfo.phone + "\n";
        ]]>
    </mx:Script>
<mx:HTTPService id="userView" url="messages.xml" resultFormat="e4x"
fault="httpService_fault(event);" result="httpService_result(event)" />
<mx:PhoneNumberValidator id="pnVal" source="{your_phone}" property="text"/>
<mx:EmailValidator id="emailVal" source="{your_email}" property="text"/>
    <mx:Array id="dp">
        <mx:Object data="view" label="View"/>
    </mx:Array>
    <mx:Panel id="panel" title="My Home" height="70%">
    <mx:TextArea id="intro" width="77%" height="100" borderStyle="none" paddingLeft="10" color="black">
            <mx:htmlText><![CDATA[Welcome to my page.]]></mx:htmlText>
        </mx:TextArea>
         <mx:ApplicationControlBar id="applicationcontrolbar1">
        <mx:ToggleButtonBar id="toggleButtonBar" color="#FFFFCC"
                dataProvider="{dp}"
                itemClick="toggleButtonBar_itemClick(event);" />
    </mx:ApplicationControlBar>
    </mx:Panel>
</mx:Application>
Note, there are other items in the array, but those are not relevant to the question of the topic here, and therefore I am not posting the code for those sections.
When I click on the View button, it does give me the correct state, but I get a blank box of textArea with no data when I know there is output from Alert.show in the view(). What have I missed?
Thanks for your help.

Thanks for the pointer. As a matter of fact, I found out that it is because of my xml nodes messing up, and that the text was displayed as white for someb reason. With a white background, of course I would not see a thing.
Thanks again.

Report not show after submit query in parameter form

Hi, anubody can help me with this
report not show after click submit query button in parameter form

To help you see what is happening, temporarily add DESNAME to your parameter screen. Make sure that DESNAME on the parameter screen has a value before you click the Submit Query button.
If you are running the report with a local report service (running on your workstation), the value of desname should be the name of your default printer.
If you are running the report on a network application server based report service you need to specify the name of a printer that is accessible to the server on which the report service is running. Make sure that it is specified in a way that the server can recognize it, e.g. \\printserver_01\HPLaserJ4210.
Maybe this will help some.
James K.

SharePoint 2010 List View Web Part not showing for read-only users?

Hello all,
I have List View Webparts on my Blank Web Part page, and it's not showing for Read-Only users.
Is this intended by Microsoft or is it a bug?
Thank you!

Hi,
According to your post, my understanding is that the read only user could not see the list view web part.
Per my knowledge, the issue may be cause that the user do not have the proper permission for the list.
1. Check whether the user can access the list.
2. Check whether the user can view all the items instead of partial items in the list.
3. Check whether there are some fields refer to other lists or terms, especially the lookup field or managed metadata filed.
If that is the case, make sure the user can access the lookup list.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

In web console Attestation menu item not showing,after OIM 9.1.0.1 install

In web console Attestationmenu item not showing,after OIM 9.1.0.1 installation
Version: 9.1.0.1860.16
Build 1860.16
thanks.

Choose option Oracle Identity Manager with Audit and Compliance Module during installation.
INIYA.

SD Card not showing after Mountain Lion Update

This matter has been discussed for some time now in
Apple Support Communities > Desktop Computers > iMac (Intel) > Discussions
SD Card not showing after Mountain lion Update
Since the update to Mountain Lion, the SD slot does not show up in Finder.
Someone gave a fix using the killall in Terminal, and that worked only once. I have not been able to get that fix to work again.
The only saving grace for me is that my SD Card us is always from my Nikon camera, and Nikon ViewNX 2 software is able to see and read from the card.
Killall may have worked partially in that I no longer get the error message telling me that I have removed the SD card improperly, and need to dismount it first.
However, Finder still cannot see it.

BrianForbesColgate wrote:
Thanks, Barney ...
Those are basics ... Been there, done that, first.
Then you should hava posted all the troubleshooting you already accomplished.
Does the card show up in System Information? Or is that another one of the "basics" you've already looked into?
Does it show up in Disk Utility? If so, have you tried formatting it there to determine if it is a formatting problem?

The sleep/wake function would not show in general to turn it on. I have a Targus case but the function will not work. What's going on?

The sleep/wake function would not show in general to turn it on. I have a Targus case but the function will not work? The place it should be their is. Auto lock, Password lock, and Restrictions

Keirosform wrote:
The sleep/wake function would not show in general to turn it on.
Ther is no "sleep/wake" setting in Settings > General.
Auto lock, Password lock, and Restrictions
Yes, these are the only three settings..
I have a Targus case but the function will not work?
What function? It won't go to sleep?
Press the Power button on top. Does it sleep?

Firefox would not connect after upgrade. Did system restore (XP) and not firefox wont even start

Firefox would not connect after upgrade from verion 6 to version 7. Did system restore (XP) and now firefox wont even start

Sometimes Firefox will hang during startup or shutdown, and still be running invisibly in the background. Usually in that case, you need to "kill" it either by restarting Windows or using the Windows Task Manager. It sounds as though you are familiar with opening the Processes tab, finding firefox.exe, and using End Process.
If you use an advanced firewall or other security software that tracks which programs are permitted to use the internet, please see these articles:
* [[Fix problems connecting to websites after updating Firefox]]
* [[Configure firewalls so that Firefox can access the Internet]]
A couple of other suggestions:
(1) Can you start Firefox in its Safe Mode? Hold down the Shift key when starting Firefox. You should get a two-button dialog. Click "Start in Safe Mode" (''not'' Reset). Any difference?
(2) In case your regular software missed something that is interfering with Firefox, try the scanning and clean-up tools listed in this article: [[Troubleshoot Firefox issues caused by malware]]

Please help, my music would not open after syncing to computer.

Please help, my music would not open after syncing to computer.

Try quitting the music app completely and restart your iPad.
Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If that didn't help - reboot your iPad. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
If that doesn't work, there may be a corrupt song in your Music app that you have to find and remove.

Why responsibility is not show for my user?

Hi experts,
Recently i need to enable one responsibility(named as R below) for my user. As i examined, R is already assigned to the user but
it's expired, so i set the end date as null. Further more, i found that R itself has an expiration date and it has arrived, so i set it as null too.
Till now, i re-login my user and expect R shown on the left tree of home page. But it doesn't exist, really.
I guess there should be a concurrent request need be run but i can't figure this out. Appreciate your help.
Thanks,
ted

If you are on R12, please see (Concurrent Processing - Concurrent Program "Sync Responsibility Role Data Into The WF Table" errors: Cannot Find File affurg02.sql [ID 727534.1]).
R12 is the EBS version i am using. From the note 727534.1, this concurrent program is obsolete and replaced by "Workflow Directory Services User/Role Validation".
Please post the contents of the concurrent request log file here.Log for "Synchronize WF LOCAL tables"
Application Object Library: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
FNDWFLSC module: Synchronize WF LOCAL tables
Current system time is 09-SEP-2012 03:35:33
**Starts**09-SEP-2012 03:35:33
**Ends**09-SEP-2012 03:37:49
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Output file size:
0
------------- 1) PRINT -------------
Disabling requested Output Post Processing. Nothing to process. The output of the request is zero byte.
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 09-SEP-2012 03:37:51
Log for "Workflow Directory Services User/Role Validation"
Application Object Library: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
FNDWFDSURV module: Workflow Directory Services User/Role Validation
Current system time is 09-SEP-2012 03:36:03
**Starts**09-SEP-2012 03:36:04
**Ends**09-SEP-2012 03:36:31
ORA-08103: object no longer exists
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Output file size:
0
Finished executing request completion options.
Concurrent request completed
Current system time is 09-SEP-2012 03:36:31
Thanks,
Ted

Itunes music not showing after accepting user agreement?

I recently moved my itunes music to a new hard drive on my computer without any issues and it had been working fine for the last month or so but after starting up my computer today itunes has updated it's user agreement terms. After accepting the user agreement terms itunes started up but is not showing any of my music. I have the latest Itunes version 11.0.5.5 installed which was updated on the 17/8/2013. I also noticed today that Itunes has created a new itunes folder in the old location so I suspect that it is reading this library instead. How do I change the settings in itunes so it will show my music and artwork in the new location?
Thanks,
Lunar_21

Hi Lunar_21,
If you are not seeing any content in iTunes, you may find the following articles helpful:
iTunes: How to open an alternate iTunes Library file or create a new one
http://support.apple.com/kb/HT1589
Apple Support: No content shows up in iTunes after updating
http://support.apple.com/kb/TS1967
Regards,
- Brenden

User not showing after restoring from time machine backup

I was having issues with my 2009 Macbook pro. took it to the Genius Bar. Diagnosistics all showed ok. (I had done troubleshooting before I had the appointment). They suggested wipe and reinstalll from my time machine backup. I agreed.
Returned home to do the reinstall. When I went to log in found that one of my user accounts did not show in the log in - only my main and "guest" accounts. On checking the "users" folder the user is present. It also does not show in the system preferences user screen but when I try to recreate it says it exists. Note I have done this wipe and reinstall with Mavericks
Help! Most of the content I have on my main BUT there are several things that are not.
Thank you for your attention.

Issue solved with visit to Genius Bar.
As I understand it here are the steps the Genius did. Attempt to create the account (system preferences->users) with the same information. It will say it already exists. Very carefully read the options. One will say use the existing account. BE CAREFUL because one option will wipe your data.
If you need to do this it might be worth the trip to the Genius Bar as you could wipe your data. One precaution I took was to bring a full copy of that user account onto my desktop (from the backup immediately before the wipe) in addition to the one in the user folder. Once we verified that the account was working I moved the desktop copy to the trash and again verified the account (just to be safe).
Hope this helps someone else.

Free space not showing after shrinking BootCamp Partition

I gave a lot of space for the windows 8 bootcamp partition because I thought I am going to install Lots of stuff on it.
After 3 months I found out that my lion partition is almost full! And I have 100 GB of free (Unused) partition on my bootcamp partition.
So I shrunk my bootcamp partition (in windows) by 60 GB. I plan to expand my lion partition in OSX so then I restarted my mac.
Next I went to disk Utility and found out that I can't expand my lion partition with the free space. Until then I realized that lion and windows have different file systems (oops.) so I decided to expand my windows partition back to normal.
Then I went back in windows and found out that the free space is not showing in disk management! What should I do next??
The free space is showing on top but when I right-click the windows partition the "Extend volume" option is greyed out.
PS I dont care about the mac partition now. Did some cleaning with CCleaner and freed 10 GB

you should have asked first to get some ideas? I would have recommended Paragon CampTuneX which is designed to resize those partitions for you.
You want to have 20-30GB free space for any OS. If you were using an SSD, at least that much or even more.
I have no idea if iPartition or gpart can help you now.

Eu_role not showing up for all users in EP7

Hi SDN,
I have newly deployed EP7, I want all users to have EU_Role but but its not showing up even though i have added eu_role to everyone group.
i do see eveyone group attched to all users but it does not show up eu_role to it.
Am i missing anything in EP7 Configuration.
Thanks
DK

Hi,
Go to everyone group and click the tab 'assign role'
Search for the eu_role recursively(check the box recursive before search). otherwise all roles will not show up.
Hope that helps you
Raghu

Password expire date back to 2011 from 2012 after assigned a user profile

Friends,
I created a profile test as
COMPOSITE_LIMIT UNLIMITED
SESSIONS_PER_USER UNLIMITED
CPU_PER_SESSION UNLIMITED
CPU_PER_CALL UNLIMITED
LOGICAL_READS_PER_SESSION UNLIMITED
LOGICAL_READS_PER_CALL UNLIMITED
IDLE_TIME 60
CONNECT_TIME UNLIMITED
PRIVATE_SGA UNLIMITED
FAILED_LOGIN_ATTEMPTS 5
PASSWORD_LIFE_TIME 120
PASSWORD_REUSE_TIME 60
PASSWORD_REUSE_MAX 30
PASSWORD_VERIFY_FUNCTION NULL
PASSWORD_LOCK_TIME 1
PASSWORD_GRACE_TIME 7;
the user default profile default PASSWORD_LIFE_TIME is 180 and password expired date is 1/7/2012. the test account was created in 7/11/2011.
Now I assign test user to test profile successfully.
However. expire date becomes 11/8/2011 1 from 1/7/2012 by select dba_users
which wrong is in my profile or somewhere?
As I think, the account password expired should be start after assigned new profile with PASSWORD_LIFE_TIME. but is seems expire date is start from original account created date.
Thanks
newdba
Edited by: Oradb on May 24, 2012 1:56 PM

I would think the expire time would be based on the last password change time which Oracle stores in the rdbms base table for user information (user$). Find a second user, alter the password, check the expire date, then assign the user to the new profile, re-check the expiration date. Post back. Behavior may vary between releases so include full Oracle version of test.
HTH -- Mark D Powell --

Responsibility would not show after assigning to users

Similar Messages

Maybe you are looking for