Restart loop IaDtora.sys and recovery also not working

After updating it got stuck in restart loop system thread not handled (iaStorA.sys) collecting data 0% ,windows 8.1 also system recovery not working. whenever i press F11 then Hp logo appears and same restart loops starts with the message.
please help me as soon as possible i also connected my hdd with another laptop as an external hdd and check it for error but no error appeared.
it also passed all Hp system Quick Test 

Hi @Ajlk , 
Thank you for visiting the HP Support Forums and Welcome. I have read  about your HP ENVY 15 Notebook and having issues with the startup stuck on HP Logo. You could reset the BIOS with this document selecting the reloading the BIOS default settings.
Please note remove any and all USB devices. Disconnect all non-essential devices, as these could cause some issues.
Here is a link on computer does not start, which has a section for the HP Logo screen. Most times this is an issue with something you have just installed.
Hope this helps you.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

  • Hello sir i purchased second hand iphone4s with ios 7 beta version after 2 month on 6 oct my iphone ask for a uers id that is unknown by me my new id and password also not work when i contavt with previous owner and use his id and password which he use on

    plz help me by mail me on   [email protected]

    the previos owner id and password also not work there what i do all do everything downdrade , upgrade but everytime ask for previous id and password...........i also erase find my phone from previous user id

  • Satellite A205-replaced HDD and recovery CD not working; media test failure

    Please help,
    My wife's computer crashed, it all started with windows\system32\en file corrupt or missing. Took it in to the geek squad and diagnostics test said hard drive corrupt.
    (Trying to recover the data is another problem to solve later)
    To save money I ordered a new HDD (WD320GB) installed the new HDD, inserted the recovery disc and get the following message:
    Pre-boot execution Environment (PXE) v2.1
    PXE-E61: Media test failure, check cable
    PXE-M0F: Exiting PXE ROM
    Operating System not found
    I can see the new HDD in the BIOS, I've changed the boot order to start with CD/DVD drive but still get the message above.
    What now?
    Thanks for any help that I can get.

    I want to say thanks to all who helped. The problem with recovery CD's not working was the DVD drive.
    I was able to get a used DVD drive really cheap and was able to reinstall to factory condition.
    Just for kicks once the install and all updates were completed I stuck the old DVD drive back in and still didn't work. So other than alot of time online and looking around for a DVD drive that would fit the laptop, I spent less than $10 for DVD drive and $65 for another hard drive which is good news, the bad news is my wife couldn't live anylonger without Facebook and bought another laptop, HP this time.
    Well my daughter will have a Tosh to do her school projects.
    Now to figure out what caused the crash, loss of data and DVD not to work in the first place.
    Thanks again for all your help.
    Happy New Year

  • Firefox process does not stop. Reset Firefox and Restart with Add ons disabbled is also not working.

    I always need to stop firefox in the task manager.
    Resetting and restarting without add ons is not possible because Firefox hangs on shut down.

    Hi, I was experiencing the same problem since a couple of weeks. I am on Firefox 18, WinXP SP3.
    The way I got rid of it was by '''removing a file called secmod.db ''' in my firefox profile directory. Firefox recreated the file and the problem is gone.
    By default the profile directory on WinXP is C:\Documents and Settings\your_username\Local Settings\Application Data\Mozilla\Firefox\something.default
    I guess on Windows Vista and up, the folder is somewhere below c:\users. Doing a search for .default might help you find it. I think it is a hidden/system folder though, so you might want to turn their visibility on.
    Hope that helps

  • HELP!! need to restart but home button and touch screen not working.

    my ipod touch 5g wont let me slide to unlock. I want to figure out a way to restart the ipod wihtout using the home buttton or touch screen because my home button is broken. (ps. I have assistive touch on.)

    Try:
    - iOS: Not responding or does not turn on
    When it says place the iPod in recovery mode
    Place the iPod in recovery mode using one of these programs:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • I use v20.0.2, and restart using same windows and tabs is NOT working. I have deleted profile and restarted, etc., but nothing seems to work. What now?

    Not sure what else that I can provide here. This particular software function does not seem to work.

    In case you are using "Clear history when Firefox closes":
    *do not clear Browsing History
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
    *https://support.mozilla.org/kb/Clear+Recent+History
    Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
    You can check for problems with the sessionstore.js and sessionstore.bak files in the Firefox profile folder that store session data.
    Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox profile folder.
    *Help > Troubleshooting Information > Profile Directory: Show Folder
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost and you will have to recreate them (make a note or bookmark them).
    *http://kb.mozillazine.org/Multiple_profile_files_created
    If you use cleanup software like CCleaner then check the settings for the Firefox application.

  • Rescue and Recovery 4 not working

    We just received a M58 7360-APU to test with. Since we are using this machine for our next refresh, I'm creating an image for the machine. But first I needed to create a set of recovery disks so I could bring it back to original when I am done. I created a full set of restore disks using R&R 4. Now I'm testing the set. When it finishes, it reboots and starts running a repair on the installation. When it finishes, in the log it shows:
    Root Cause Found:
    No OS Files found on disk
    Repair action: Partition Table Repair
    Result: Failed. Error Code = 0x490
    Time taken = 6989ms
    Can anyone tell me how to resolve this? I need to restore it because I need to get the Thinkvantage software off of it.
    Pete

    ddalimonte, welcome to the forum,
    ddalimonte wrote: 
    I opted to burn out a Vista Recovery DVD
    How many discs did you burn? A self made set of recovery discs for a T61 with Vista should be a total of 3 discs, 1x boot cd and 2x recovery dvd.  Maybe you only created the rescue disc??  More information can be found here
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Forgotten passcode and recovery mode not worked?

    My sister was using my iphone for games and somehow made a passcode, she doesnt know what she did to do this and now we cant get into the phone, we tried with recovery mode and it seemed to do the trick until it finished and then returned back to the passcode screen. help me please!

    Then you never really got into recovery mode, it can take several attempts. Read here:
    http://support.apple.com/kb/HT1808
    Or, login to iCloud.com from any computer, locate the phone, then erase it.

  • My iphone 4's display is completely blackout and even its battery is not charging. I tried to restart my iPhone by pressing home and on/off button but it is also not worked. Now I'm in Nepal and here not even a single apple service center. What to do? Ple

    Its been one month, my iphone 4's display is completely blackout and even its battery is not charging. I tried to restart my iPhone by pressing home and on/off button but it is also not worked. Now I'm in Nepal and here not even a single apple service center. What to do? Please help me.

    You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
    This is NOT Apple ,Apple do not read nor do they  therefore respond
    So if you would like to wind your neck in ........................
    try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup

  • Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

    Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
    My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Boot into Rescue and Recovery but not Windows

    Everytime my pc is powered on or restarted, it boots into Rescue and Recovery, but not Windows.
    What can I do?

    Hi,
    first I would like to explain one thing, so that we are on the same page with the RnR partition.
    Vista and XP are using different RnR partitions and the location of these aprtitions is placed on the HDD is different way, so that it can be used in conjuction with your Operating system.
    So in the time, where you have used the XP and OS, the RnR partition was placed in the partition table on the end/back. DIrectly after you upgraded to the Vista and did not made any changes to the RnR partition, than it is still on the end/back, which is not the corect way. Becase the Vista should use the RnR partition, that should be placed on the begind/start/in the front of all the other partitions.
    So in case there was no change made to the RnR partition, like relocation, or reinstall using the Vista RnR version, then you will not be able to boot into it.
    So here is what I would advice you to do:
    - reinstall, or download and install the Vista version of RnR (the latest version) => this will rewrite the partition table and in case of need it will create the RnR partition.
    - use bmgr32.exe , which is located on your HDD by default to rewrite the partition table. Please start it from command line in follwing way:
    bmgr32.exe /phil
    ==> this will bring you all the command line options and you can use it based on this.
    NOTE:
    Plase note, that once you captured some backups using the XP version of RnR , or a different version of RnR, then it's not possible to restor the backups using a different version.
    Simple: you must use the exact same version of RnR for backup and also for the  restore process.
    Let me know, if you have any more informations to this situation.
    Cheers

  • I hooked up new iMac to wireless network and now iPad and iPhone do not work using wireless.  I am using a Netgear N300 router.  Also my Netgear ethernet/homeplug for wireless TV internet no longer works.  Any ideas?

    I hooked up new iMac to wireless network and now iPad and iPhone do not work using wireless. They did before hooking up the iMac. I am using a Netgear N300 router.  Also my Netgear ethernet/homeplug for wireless TV internet no longer works.  Any ideas?  I have tried unplugging, restarting, and resetting.  No luck!  Thanks!

    You should probalby contact Netgear

  • Rescue and Recovery will not install on Windows 7 upgrade

    I have a thinkpad SL500 that I upgraded from Vista to Windows 7 a week ago.  I have tried to install Thinkvantage Rescue and Recovery but get this error message during the initial install:  "Rescue and Recovery does not support installing from the operating system which upgrade from legacy preload system." 
    I did load Win 7 32 bit from a legacy Vista preload system.  I have been trying to install R&R v4.5.  Is there a workaround to get ThinkVantage R&R on this Windows 7 machine?  Thanks, John 

    Win 7 does come with it's RE environment.  On my pc I can:
    (1) boot into windows 7 (default)
    (2) PF8 boot windows into Safe mode, which will allow me to Launch the Windows recovery environment.  This is
    mostly a Repair environment, but can invoke other items, such as Windows restore.  This is NOT an restore from backup tool , per se.
    (3) PF 11 boot into RNR standalone environment.
    All 3 have Bootable software on my C drive, and entries in the BCD (boot control data). Could you document what your pc/laptop was shipped with from Lenovo.  An original windows vista or windows 7? A shipped Lenovo, with win 7,should have a Z partition and a X partition.  One has the RNR standalone, the other has the Factory install data to reset back to OBE, out of the box experience.
    Did you purchase a WIN 7 DVD upgrade disc from a retailer? Could you also post a screen shot from Disk management that shows the attributes of the D drive.  I am trying to find out if the D drive is Active
    Check under the status line,  HEALTHY(Active,primary partition). Did you try the Diskpart command?. 
    You do not need to worry about SYSPREP.  It is mainly an Administrator tool for deploying system images.
    By the button, do you mean the Thinkvantage blue button?  This just tells the BIOS to boot into the RNR standalone environment.   My original system was a Vista.  Thus I have no experience verifying the X and Z drives.  This info is just from reading other posts.
    ===
    As a side note, Does your win 7 support Bitlocker? Can you view the contents of YOUR D drive?

  • Sound, Restarting and Email Msgs not working

    Recently I have had problems where the sound just stops working.  The profiles are not changing and it works for awhile, but then I start to notice the red light flashing and no sound.  The only way to get it back is to do a hard reset (I've found).
    Also, my phone decides to restart a lot . . . why and how do I get it to stop?
    This morning, going into my messages folder where all my notifications go, I can click on any type of notification to see it, except for the email messages.  I click and it just does nothing.  I've already tried reseting and this has not worked.
    Please help!

    It's ok, I fixed it.
    I got an iPhone 5. Bravo to apple for making me buy another one of their products.

  • When I was updating I Phone version 4  from iTunes. it got stuck in middle of updating, after uninstall the version 3 and new version 4 was not installed. Now iTunes is not detecting the iphone and my iphone is also not working n showing connection cable

    When i was updating i phone version 4 from Itunes. It got stuck in middle of updating, after uninstall the version3. But new version was not installed. Now itunes is not detecting the iphone and iphone is also not working and showing connection cable with itunes. Pls help..

    Check your system for possible Malware. But you have to do it in WIndows Safe Mode.
    (Do not use your own Anti-virus to SCAN)
    Start your computer in "Safe mode with networking", go to this link download a free version of Malwarebyte.
    http://www.malwarebytes.org/products/malwarebytes_free
    Install and perform update immediately, then do a full SCAN. Remove malware if it indeed finds any. Restart computer to regular windows to let Malwarebyte complete the removal.
    To start your computer in safe mode
    Press and hold the F8 key as your computer starts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you'll need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.
    On the Advanced Boot Options screen, use the arrow keys to highlight the "safe mode with networking" option, and then press Enter. Log on to your computer with a user account that has administrator rights.
    When your computer is in safe mode, you'll see the words Safe Mode in the corners of your screen. To exit safe mode, restart your computer and let Windows start normally.

Maybe you are looking for