Restore a site from files

Hi Guys, i know im a idiot but i formatted my pc recently, now what i forgot to do was to export the site im working on as a .ste file,
although i still have all the files and folders and i can point to the root folder if i must define a new site on my new dreamweaver,
but im not sure how to get the server behaviours and database connections back (i have a user registration on the site). is there any other way than doing it all over again?

Could it be that my hosts doesnt support this?
If you are trying to access the remote MySQL server, yes.  Some hosts will only allow access from the IP address corresponding to the hosted site.  You would be trying to access it from a different IP address and it would fail.  In theory, if you are not using any database access, then you should be able to use the remote site also as a testing server with the added overhead of keeping the FTP connection open and uploading files during the testing.  I would rather test locally than do that.

Similar Messages

  • Restoring iweb site from idisk

    My hard drive from a Mac with OS 10.4.11 recently died a painful death and was unrecoverable. My files were unfortunately not backed up as they should have been (lesson learned). I have a new Mac and am trying to be able to access my iweb site without having to start over again. All of the files are accessible via idisk, but is there a way to restore them so that I can actually make edits in iweb?
    thanks!
    michelle

    I'm sure you searched for an answer but couldn't find it : lost iweb file

  • Hiding and restoring table columns from file?

    how i handle hiding and unhiding columns in a jtable is that i have a checkbox for each column, depending on which is checked "on" the tablecolumn is found and added to a vector and removed from the table.
    when the checkbox is checked "off" this vector is searched for the correct tablecolumn, and then added back to the table. this works fine.
    when i close out of the program, i go thru the table and write the visible column names along with its size to file.
    when i re-open the program, i create the table normally, then go thru the file and hide(remove) the tablecolumns found in it..this works fine.
    but when i go back to this checkbox list and try to unhide the tablecolumn, i get an exception
    java.lang.IllegalArgumentException: Cannot format given Object as a Number
         at java.text.NumberFormat.format(NumberFormat.java:219)
         at java.text.Format.format(Format.java:133)
         at javax.swing.JTable$DoubleRenderer.setValue(JTable.java:3397)
         at javax.swing.table.DefaultTableCellRenderer.getTableCellRendererComponent(DefaultTableCellRenderer.java:160)
         at javax.swing.JTable.prepareRenderer(JTable.java:3731)
         at javax.swing.plaf.basic.BasicTableUI.paintCell(BasicTableUI.java:1149)
         at javax.swing.plaf.basic.BasicTableUI.paintCells(BasicTableUI.java:1051)
         at javax.swing.plaf.basic.BasicTableUI.paint(BasicTableUI.java:974)
         at javax.swing.plaf.ComponentUI.update(ComponentUI.java:142)
         at javax.swing.JComponent.paintComponent(JComponent.java:541)
         at javax.swing.JComponent.paint(JComponent.java:808)
         at javax.swing.JComponent.paintChildren(JComponent.java:647)
         at javax.swing.JComponent.paint(JComponent.java:817)
         at javax.swing.JViewport.paint(JViewport.java:722)
         at javax.swing.JComponent.paintChildren(JComponent.java:647)
         at javax.swing.JComponent.paint(JComponent.java:817)
         at javax.swing.JComponent.paintWithOffscreenBuffer(JComponent.java:4787)
         at javax.swing.JComponent.paintDoubleBuffered(JComponent.java:4740)
         at javax.swing.JComponent._paintImmediately(JComponent.java:4685)
         at javax.swing.JComponent.paintImmediately(JComponent.java:4488)
         at javax.swing.RepaintManager.paintDirtyRegions(RepaintManager.java:410)
         at javax.swing.SystemEventQueueUtilities$ComponentWorkRequest.run(SystemEventQueueUtilities.java:117)
         at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:454)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)before i unhide the columns, the table is already populated with values. so it might have something to do with that...cuz there is no problems unhiding them if the table contains no data
    any ideas?
    thanks

    If you're interested, this method hides a table column without any modifications of its content:
       public static void setTableColumnVisible(JTable table, int col,                                                                             
                                                  boolean visible, int width) {
          try {
             TableColumn column = table.getColumnModel().getColumn(col);
             if (!visible) {
                column.setMinWidth(0);
                column.setWidth(0);
                column.setMaxWidth(0);
                column.setPreferredWidth(0);
             else {
                column.setWidth(width);
                column.setPreferredWidth(width);
          catch(Exception e) {
             e.printStackTrace();
       }Method use:
    . setTableColumnVisible(table, col, false, 0) hides the column
    . setTableColumnVisible(table, col, true, 100) restores the column to its size of 100
    Hope this helped,
    Regards.

  • Upgrade to CC restore DW sites

    Greetings!
    OK, Mr. Bonehaed here, I cleared out all my CS5 installations before upgrading to CC, and now I have no sites in my DW...
    BUT! I did back them up...
    Is there a way to restore all my sites from files in preferences, or anywhere else?
    Please help... I got quite a batch, and the long way will take long time...
    Thanks!

    You should have exported all your site definition settings (.ste files) prior to removing CS5. 
    If you have them saved somewhere, you can import those settings into your new DW.  If you don't have them saved somewhere, you'll need to manually define each site.
    Nancy O.

  • Can somebody help me to restore my iWeb domain file from Time Machine (at the moment my whole life history is frozen online)?

    I had to wipe my machine and create a new account. Now I can't restore my iWeb domain file and thus can't edit my site. When I do try to restore the file I'm told:
    The operation can’t be completed because some items had to be skipped. For each item, choose File > Get Info, make sure “Locked” is deselected, and then check the Sharing & Permissions section. When you are sure the items are unlocked and not designated as Read Only or No Access, try again.
    I've changed the permissions of the domain file/folder itself (within Time Machine) but I gather it wants me to change the permission of everything in there, which would presumably take hours and hours.
    I've tried just dragging the domain file from the hard drive where the Time Machine backup is stored but the result of that is:
    Can’t open file “~/Library/Application Support/iWeb/Domain.sites2.”
    This is quite urgent because I am applying for a new job and can't display my latest work online. Any help much appreciated in advance.

    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  

  • How to restore a site deleted from SharePoint Designer 2010

    Hi All,
         I have opened a test server site in share point designer 2010, & deleted that particular site in SP designer 2010,can anyone let me know how to restore the site by using SharePoint Designer?
    I followed below mentioned procedure to restore the site using SharePoint Designer
    Open SharePoint Designer, File tab, Sites under File Tab, Open site, specified the URL of site,opened..
    It is getting connected to the Organisation network & showing "path does not exist,check the path and try again".
    Whether, Is it possible to restore the site deleted from share point designer in site collection recycle bin. or
    Is it possible to copy the site from Production server to test server.
    Waiting for an response at the earlier.
    Thanks in Advance.
    Badri

    Hi Badri,
    1.You could not restore site deleted from SharePoint designer in site collection, you can only restore the site deleted from
    UI in site collection recycle bin, deleted from end user recycle bin.
    2.You can export the site from production server, then import it to test server.
    http://technet.microsoft.com/en-us/library/ff607895(v=office.14).aspx
    Best Regards.
    Kelly Chen
    TechNet Community Support

  • My macbookpro is not opening pdf sites from safari or firefox, it goes to the address but just gives me a black screen. I can however open a pdf file that I have saved on my HD, it opens on preview. any thoughts?

    My macbookpro is not opening pdf sites from safari or firefox, it goes to the address but just gives me a black screen. I can however open a pdf file that I have saved on my HD, it opens on preview. any thoughts? osx 10.6.8

    Back up all data.
    Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste (command-V) into the text box that opens, then press return.
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    I've seen an unconfirmed report that the "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you might need to remove it as well, if applicable.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • Restoring old iweb site from idisk

    THrough sheer ignorance, I created a "new Site" in iweb, not realizing it would replace my exiting website, which is far more important. I want to restore my old site. I am able to access the old site through idisk, but have no idea how to relink it so that it reappears as my website. (Someone suggested opening the index.html in plain text editor and correcting the URL, but I have no idea how to do that. Tried opening it in "text Edit" and no URL is there)
    Appreciate any help!!!! This is killing me!

    TextEdit is what is says - it is an html editor so that you use it to edit html code, so not url will show up as it does in Safari etc. Safari is a browser and TextEdit does what it says on the tin - edits html code.
    The easiest way is to go back into iWeb and open your domain file with the site on it and re-publish all of that site and it will be back at the top again. That is assuming that you have the relevant domain fiel and have not deleted it?
    If you publish another site in iWeb, assuming that they have different names, they will not cancel each other out, but what will happen is that the second published site will be at the top, so all you need do is re-publish your original site from iWeb and it will be back at the top again.
    You can always get to all your iWeb sites via the url http://web.me.com/username/sitename so Site1, Site2 etc.

  • HT1382 how can I restore my back up files from my laptop? i want to see the dates and time that I backed up  my files. is it posssible?

    how can I restore my back up files from my laptop? i want to see the dates and time that I backed up  my files. is it posssible?

    What backed up files?
    Available backups for an iOS device can be found in Edit > Preferences > Devices.

  • I built a website, using iWeb.  I backed up daily with Time Machine and OS 10.6.  My HD crashed.  I replaced the HD and installed 10.5. But now I can't restore iWeb and my domain file. How do I restore my site files on the new drive?

    I obviously dont know how to use this forum...my question to the community seems to be the truncated phrase in the title block above..you can scroll thru it to see my whole question....basiclly,.my question is:  How do I restore my iWeb domain files which are kept in  user>library>applicationssupport>iWeb>domain in my Time Machine date listings...to a newly installed disc.  I had a disk crash, removed the failed drive and installed another. I then installed OS 10.5 (I didn't have a copy of my 10.6). Now I'm having difficulty figuring out how to get the iWeb files from the Time Machine external drive used with the 10.6 to the new drive running 10.5...any help muich appreciated....!!
    bob in St. Peters Nova Scotia...

    Go to to your Users/Home/Library/Application Support/iWeb folder in the Finder and then enter  Time Machine.  Go back to the last backup that has the domain file, select it and use the Restore button.
    OT

  • I restored my bookmarks from a resent .json file, but one folder is now empty and one is missing.

    Hi,
    Because of reasons my computer needed to be refreshed. My old firefox profile folder was saved though, and with that the bookmarkbackups. As the title says I restored my bookmarks from a resent .json file, but one folder (containing probably about a hundred bookmarks) is now empty and one other is missing completely.
    In some places I have a 5 levels deep folder structure for my bookmarks, but since the folders missing are from different levels I don't think this is the problem.
    The now empty folder contained six or seven other folders, that in turn contained a lot of bookmarks with titles including non-alphanumerical characters. †?|&*()<-/., to be precise. However, if I restore a very old .json (from september 2013) the folders are present and contain the mentioned bookmarks - albeit much fewer, since the file is old. A few other bookmarks still present also contain the mentioned characters, so this is probably not the problem either.
    The folder that is completely missing just contained a lot of bookmarks that were to be sorted.
    When opening the more recent .json files (I have a whole month of automatic backups to choose from) in the firefox scratchpad it would seem that the bookmarks are missing alltogether, so I suppose that there is not much to do about it (please correct me if I'm wrong), but I definitely want to report the bug.
    Is there anything at all to do about it?
    Thanks,
    Hanna

    If the bookmarks aren't present in the JSON backup then it is likely that you got a corrupted places.sqlite file at some time that caused the backup not working properly.
    Did you try all the backups?
    Note that the xxxx part of the bookmarks-####-##-##_xxxx.json file name shows the number of bookmarks in the file.

  • How do I restore iTunes library from Backup files on External Hard Drive?

    How do I restore iTunes library from Backup files on External Hard Drive and keep the new iTunes library on the External Hard Drive. I have all the media and playlist and .xml .itl files, just want the iTunes to recognise the content.
    I backedup my iTunes content by dragging to External Hard Drive. Formatted and reinstalled OS. My iTunes content is so large, that I wish for the Library and content to remain on the External Hard Drive. I have all the music files and playlists, I just cannot get the iTunes application to display all the content. Hoping to Not have to drag and drop all the content to be recopied into new iTunes organised files.
    Troubleshooting this by researching other conversations on the web, I have come stuck for a solution. One Troubleshoot told me to hold down the Command key and then lauch iTunes and a dialogue box will appear to Choose a new library, however when I try this, no Dialogue box appear to give me the option!?

    It sometimes has that funny switch symbol on it too.  
    tt2

  • File System error while restoring a backup from analysis server to another

    Hi
    I have restored an analysis database backup to from server 1  (sql server 2008) to server 2(sql 2008) and its working fine 
    and now am trying to restore another database from analysis server server 3 (sql 2005) to  server 2 (sql 2008 )but its giving error that 
    File System error occured while opening the file G:\ProgramFiles\MSAS10.MSSQLSERVER\OLAP\Backup\Workordermodule.0.db\WomDW1.7.00 ..etc

    Hi Maverick,
    According to your description, you are experiencing the error when restoring the SSAS 2005 database on SSAS 2008 server, right?
    In your scenario, how do you backup your SSAS 2005 database? Please ensure that you backup and restore steps are correct. Here is a blog which describe how to migrate a cube in SQL Server Analysis Services 2005 to SQL Server Analysis Services 2008 step by
    step, please refer to the link below.
    http://blogs.technet.com/b/mdegre/archive/2010/03/31/migrating-a-cube-in-sql-server-analysis-services-2005-to-sql-server-analysis-services-2008.aspx
    Besides, you can import SQL 2005 AS database in SQL 2008 BIDS Project. Then fix AMO warnings and deploy that database on SQL 2008 Server.
    http://technet.microsoft.com/en-in/library/ms365361(v=sql.100).aspx
    Regards,
    Charlie Liao
    TechNet Community Support

  • How do I restore my bookmarks from an HTML file?

    I have just installed Ubuntu 11.04 and I want to restore my bookmarks from an HTML file.
    This used to be accessible via "Bookmarks-> Organise Bookmarks" but the "Organise Bookmarks" menu item no longer exists so I'm stymied.
    This help system seems to think that it does exist, however, so please note that on my system, it does NOT. I suspect that hundreds, thousands, or even millions of new Ubuntu 11.04 users will be facing exactly the same problem.
    I don't think users will be able to help with this one unless someone knows how to restore the "Organise Bookmarks" menu item. It's the only one that will do what I want and so there's no point recommending "Show All Bookmarks" as a solution. That doesn't work.
    Finally, persuading this system that I really do have a new problem that isn't covered in the FAQs was a very irritating experience. I wonder if Chrome will know what to do with my "bookmarks.html" file?

    Update to my previous posting. I just installed Chromium, and it took '''LESS than 10 seconds''' to import my bookmarks. Why would I waste any more time with Firefox?? I had intended to give Firefox 4 a chance to show me what improvements had been made, but who needs the grief. Bad move guys... bad move.

  • I had to re-install XP on my laptop. I installed itunes. Now I want to restore my music from backup CD's. But the option device under file is greyed out. I can't select restore from backup. How do I make the restore option active. I have an ipod nano

    I had to re-install XP on my laptop. I then installed itunes again. Now I want to restore my music from backup CD's. But the option device under file is greyed out. I can't select restore from backup. How do I make the restore option active? i have an IPOD nano.

    I think it's QuickTime player causing the problem, when I try to open it I get the windows error that an error has occured
    Let's try swapping out your QuickTime again, taking a few extra explicit precautions this time.
    Head into your Add/Remove programs. uninstall QuickTime.
    Next, we’ll manually remove any leftover program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    5. Navigate to C:\Windows\system32\.
    6. Remove the files QuickTime.qts and QuicktimeVR.qtx. (If “Hide filename extensions for known file types” is enabled on the PC, then those two files will appear as “QuickTime” and QuickTimeVR”.)
    7. Restart your computer.
    Now download and save a copy of the latest standalone QuickTime installer to your hard drive. (We'll run the install from there rather than online.)
    Latest Quicktime Installers … get the one that doesn’t mention iTunes
    Switch off antivirus and antispyware applications prior to the install. Start the install by doubleclicking the QuickTimeInstaller.exe.
    If that install goes through okay, restart the PC and try launching iTunes again. Does your iTunes launch properly now?
    (If you get an error message on the QuickTime uninstall or standalone reinstall, let us know what it says. Include error message numbers if you're getting any.)

Maybe you are looking for