RESTORE SYSTEM FROM DISK IMAGE

Hi people,
I was wandering if anyone could help me with this little thing. I hate Time Machine, so that's not a viable solution for my inquiry. What I want to do is migrate my whole SL system from my old MacBook to my new one. Is it possible to create a Disk Image of my old MacBook's Hard Drive with Disk Utility or any other software and then restore SL from it in my new one?
*I know many of you may think TM is great, but I don't like it, so PLEASE spare me from lectures on why I should use it. I know I sound harsh, but every time I post something like this ten out of every eleven responses are about that.
*PLEASE, I BEG you, don't inquire upon why I want to do it this way. Again, I sound mean, but most of the responses I get are usually a pile of uselessness that just takes up space and doesn't help.
Thanks a lot for your time,
ThePhazonMonkey

Thomas is right. Restoring an older Mac's "whole SL system" (which I take to mean the entire contents of its startup disk) to a different one is a bad idea, whether you do it with a disk image, clone, or that app you hate so much.
In the first place, there is no guarantee that the OS version on an older Mac will have all the files needed to support the newest ones, so all you may get for your efforts is a new Mac that won't boot at all or kernel panics soon afterwards.
In the second, there is no guarantee that all the user & system settings from one Mac will be compatible with those of another. The OS will do its best to compensate for this, for instance by using defaults when the other Mac's settings are invalid or incompatible, but the process is not foolproof & you may experience instabilities or unexpected behavior that will be hard to track down & remedy.
Do as Thomas suggests & use Migration Assistant, or better yet use Setup Assistant on the first startup of a new Mac to avoid any problems with duplicate user account names. (You cannot merge two existing user accounts with any automated software because each has its own set of home folder items that will conflict with the other's, so you must manually choose which ones to use with the account you want to keep.)

Similar Messages

  • Upgrade MacBook Hard Drive - Restore System from Time Machine Backup?

    I have a MacBook that I want to upgrade the hard drive of. Am I right in thinking, all I need to do is:
    Run Time Machine one last time, to make a recent backup of the MacBook
    Install the new hard drive in the MacBook
    Insert the Snow Leopard DVD, and start a clean installation
    During installation, select the option to Restore System From Backup...
    Will this copy across ALL of the contents of the old MacBook's hard drive, to the new MacBook's hard drive? A perfect clone? Because that's what I want to do.

    I performed the installation, restoring a Time Machine backup from the external hard drive to the new blank internal one I put inside the MacBook. Everything went fine, except for one problem.
    Now, whenever I try to open Safari, it immediately crashes with the error message:
    "Safari quit unexpectedly
    Exception Type: EXC_BAD_ACCESS (SIGSEGV)"
    What's going on? How can I stop Safari from doing this? I've repaired permissions using Disk Utility, and Spotlight has finished re-indexing everything.

  • Can't find Restore System from Backup In utilities

    Ok I messed up my os and I need to do a restore system from back up I can't seem to find the restore system from back option in my utilities when i am running the installer with the os installer disk and when i have my external hooked up it just wants me to install in to that thing I don't know what that would do. I have read the article about restoring the entire system and that what I need to do but I can 't because my messed up os wont let me restart/shutdown with out pushing the power button I am tempted to just erase and install but I don't even know how restore with my time machine and plus i am scared to do it
    any help would be most welcome i have been trying to fix this for about month now

    I almost understand what you wrote, but it's so confusingly written I'm not sure how to reply. So give this a try:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • Questions about "Restore System From Time Machine"

    Looking to fix an apparent system corruption problem on my work machine, I discovered the "Utilities > Restore System From Time Machine" option of the Leopard installation disc. I have some questions that are not answered in http://support.apple.com/kb/HT1177:
    1. Does this option erase the hard drive and install a fresh system from DVD, or do I need to do that in a separate step?
    2. What about software updates - when are they applied?
    3. Will third-party system extensions be reinstalled OK?
    4. I tried launching the process on my home machine, just to see how it works. At work I have a dedicated disk for Time Machine, but at home I have a Time Capsule, serving two Macs via Ethernet. I've also configured the TC to give us a shared volume; so in normal operation I have two network volumes, <Username>, containing Time Machine's sparsebundle file for that user's Mac, and "Shared". When I boot from the installation DVD and run "Utilities > Restore System From Time Machine", the backup volume list only shows the "Shared" volume. If I select it, I'm prompted for my TC username and password; I enter it, TC spins up, and then nothing. I cannot continue the restoration process, and reselecting the "Shared" volume does nothing. ???
    Thanks in advance for your help.
    -- Phil

    For the record, here's what I've found out so far:
    1. The "Restore System From Time Machine" option seems to want to restore everything, including the system, from the Time Machine backup. I wanted a clean system install, so I did an "Erase & install" followed by a "Restore from Time Machine" in the Migration Assistant. That got me most, but not all, of my settings back; exceptions include the printer configurations, the desktop picture, and the Dock settings.
    2. Software updates can be applied after the new system is rebooted.
    3. Most 3rd party extensions seem to have been restored OK, but some (like MacFuse) were not.
    4. I'd still be grateful for any hints concerning how to get "Restore from Time Machine" to work with a Time Capsule.
    -- Phil

  • "Restore system from backup" doesn't work

    Hi folks! I've got a strange little problem and my normal rampage through Google hasn't dug up anything, so I figured I'd ask it here.
    I currently have an early 2011 MacBookPro running 10.6.8 on an Intel SSD. A few days ago I figured I'd install an XP boot camp partition for the occasional bout of gaming (mmm... Skyrim... *dreamy look*)
    So I made my Time Machine backup up-to-date, burned a CD with drivers, and let Disk Utility play with the partitions. Only thing was it said it couldn't do the job due to space issues and suggested I wipe the disk first.
    Ok, no problem. My Time Machine backup was snug and secure and I've got plenty of install experience. I popped in the Lion DVD I'd burned for my other iMac and booted from it. Strangely, it give me an installation error (I guess it tries to install automatically without user interaction). But that's fine since I didn't want to install Lion anyway (I'm addicted to SL's Spaces). So I ran Disk Utility again with the partitions the way Boot Camp had advised (GUID, 2 partitions). This also worked without a problem.
    Then I attempted the option "Restore system from backup" in the Utilities menu, and lo and behold: nothing happens. Nothing happened at all. No drive spin-up, no color wheel, no indication of any activity whatsoever. If I select any of the other options, it opens promptly, but clicking the restore option is as productive as a glob of ant spit on a meteor strike.
    So I figure, still no worries, maybe the Lion disk has issues. So I take out my Snow Leopard DVD and boot from that. Never gave problems before, but alas: the iMac refuses to boot from it and starts throwing out 3 beeps every 5 seconds or so. (Googling the beeps pointed me to memory issues. Wait.. Whut?!?)
    Okaaay. Then I tried it with my Leopard DVD. Once again, won't boot, beeps.
    The Lion DVD seems to be the only DVD I can boot my mac from. The only thing I can guess at is that Apple prevents us from installing with older DVD's because of driver issues, which makes sense I guess. But I had Snow Leopard running fine up until now. I've tried several different partitioning schemes including the default one for an installation, but no cigar. Both Disk Utility and futil show both drives are visible and ok.
    Anyone have any ideas? Thanks in advance for your time!
    regards,
    Meindert Honig

    lepkitty wrote:
    you should see the time machine come up and be able to select a date on the rite. the screen should look like its something out of star trek with several windows going back into a star like looking thing. if you see that then you want to do is select a date then click restore. you will be promoted that doing this will erase the computer, thats ok! its going to erase it and replace it with what your restoring.
    You're mixing two very different things. You get the +Star Wars+ display, with the timeline on the right, only when browsing via +Enter Time Machine.+ Restoring something from there +*does not erase your entire computer!+* It only replaces what you've selected to restore.
    If you do a full system restore (meaning boot volume), starting with your Install disc (per #14 in the Frequently Asked Questions *User Tip,* also at the top of this forum), there is no "Star Wars" display, and only the drive/partition that you select as a destination for the restore is erased.

  • Recovering Mac HD via Time Machine Backup fails because "Restore system from backup" doesn't show in Utilities Menu of original install. DVD

    Hi, after serious problems (troubleshooting didn't help) with my iMac G5 (PPC) running Mac OS X Leopard I've tried to recover my Mac HD via Time Machine (exactly as described by David Pogue on page 242 of the Leopard Missing Manual). However, "Restore system from backup" in the Utilities Menu of my original Leopard installation DVD failed to show up. What can I do?
    Any assistance will be greatly appreciated -
    Ballant

    Hi Ballant,
    I'm not very good with TM, nor a fan of it, but our resident king of TM, Pondini, has a vast array of very well done TM trouble shootings...
    http://pondini.org/TM/Troubleshooting.html

  • OS 10.6 - Please help - problem restoring system from time machine!

    Hi there,
    Today I installed a little program to convert flac audio files to mp3. When I ran the program the computer froze, so I rebooted but then I could move the cursor but not click on any menus or icons on the desktop, they just wouldnt respond - so basically I couldnt use the computer. After re-booting a few times with the same result I decided to reinstall the system using time machine from an external hard drive. I reinstalled OSX, then reinstalled Snow Leopard, then reinstalled the system from a previous save from Time Machine. It said the installation was successful, but when the computer restarted a message comes up saying "You need to restart your computer. Hold down the Power button until it turns off, then press the Power button again". Ive done this about 5 times now but it always just says the same message without starting properly. WHAT DO I DO???? I really need to use my computer tomorrow so any help is hugely appreciated!!! TIA
    PS. i have done a hardware test in "loop mode" and it says everything is fine

    HiDef Jules wrote:
    Hi there,
    Today I installed a little program to convert flac audio files to mp3. When I ran the program the computer froze, so I rebooted but then I could move the cursor but not click on any menus or icons on the desktop, they just wouldnt respond - so basically I couldnt use the computer. After re-booting a few times with the same result I decided to reinstall the system using time machine from an external hard drive. I reinstalled OSX, then reinstalled Snow Leopard, then reinstalled the system from a previous save from Time Machine.
    how exactly did you reinstall the system from TM? please give details. the correct way to do it is to boot from the snow leopard DVD and use the "restore system from backup" utility in the Utilities menu. there is no need to reinstall anything prior to using that utility. the restore utility wipes your hard drive and restores it to the state it was in at the backup time.
    It said the installation was successful, but when the computer restarted a message comes up saying "You need to restart your computer. Hold down the Power button until it turns off, then press the Power button again". Ive done this about 5 times now but it always just says the same message without starting properly. WHAT DO I DO???? I really need to use my computer tomorrow so any help is hugely appreciated!!! TIA
    PS. i have done a hardware test in "loop mode" and it says everything is fine

  • Restoring System from Backup

    When the mac os x cd installer is running you can go to "Utilities" and "Restore System from Backup". Does this command install snow leopard and then add the time machine files or does it just restore the files (meaning you will have to install Snow Leopard first).

    Have a read here How do I restore my entire system?
    It restores both the OSX system and the user files (applications and data).
    Stefan

  • TS1463 What is the easiest way to restore my ipod back to factory specs. It has a red circle with a red x in the middle,please help me to fix my ipod, until now i can't use my ipod..i tried all the procedures in Restore ipod from disk mode but still not w

    What is the easiest way to restore my ipod back to factory specs. It has a red circle with a red x in the middle,please help me to fix my ipod, until now i can't use my ipod..i tried all the procedures in Restore ipod from disk mode but still not working, please help me...

    If you are unable to get the iPod into Disk Mode to try and restore it, it's a very good indication, as mentioned in the article, that the iPod's hard drive is damaged and in need of replacement either by Apple or a third party repair company.
    B-rock

  • Dock gets corrupted on Iintel machines/10.4 after restoring from disk image

    Hi all,
    I run a script at home that creates an image of my boot disk every night (it reboots into another volume, runs SuperDuper! and boots back into boot volume. I also use master disk images to deploy Macs at work. Every time an image is restored the dock becomes a mess, it looks something like this:
    http://a-world.net/files/dockmess1.jpg
    ...random icons pointing to random files, example, this is what used to be a Firefox icon, not:
    http://a-world.net/files/dockmess2.jpg
    This only happens on Intel Macs and started to happen recently after one the system updates. It wasn't happening under 10.4.6 I think but it started some time after.
    What's even weirder is that restoring com.apple.dock.plist from backup (Retrospect) doesn't seem to help, the prefs get corrupted anyway. Is there any other prefs file responsible for maintaining links betwen items in the Dock and originals? By the way desktop shortcuts do not get messed up, only the dock.
    Any ideas? This is very annoying. Thanks.

    This behavior is happening to quite a few of our computers. What they all have in common is that they are Intel Macs that have been upgraded to 10.4.10. I have verified on our test boxes that the problem does not occur with 10.4.9, then appears in 10.4.10. Don't know why.

  • Restored system from Time Machine backup disk but the system could not start-up

    On MacBook Pro early 2008, restored the entire system from Time Machine backup disk to the entire disk.
    The previous system on the backup disk had FileVault turned on.
    The restore completed successfully and I was prompted to restart the system via the new restored system disk.
    I heard the normal start-up sound, then the Apple logo, but it stuck at the logo screen. And the cooling fan run at almost full speed?
    I have been waiting for a few hours, guessing it might FileVault the disk.
    Finally I have to shutdown the machine as it stuck at the logo screen forever.
    Anyone has the same issue? Any ideas?

    BTW, I also tried Repair the system disk, Fix permissions via Disk Utility.
    I guess I must lose some files either during the backup or the restore.

  • Restore from disk image on external hard drive

    I have a early 2011 macbook pro and the internal hard drive failed. I installed OS X mavericks on an external hard drive (1) and I boot from the external drive (1). On a different external hard drive (2), I have a disk image of my macintosh HD (the computer's original hard drive with all my data on it) How do I go about restoring from the disk image on the external drive(2) to external hard drive (1)?
    I want to be able to boot from the external hard drive (1) and have all my data that I backed up as a disk image on external hard drive (2)

    I put the disk image in the source field and "backup" , the external drive I want it on, in the destination field
    When I try to use disk utility it says it must scan the disk image first, then says "Unable to scan "Backup" (resource busy)"
    "Backup" is the name of the external HD  I am booting off of, which makes sense that it says resource busy. So how is this done?

  • Superduper backup to disk image then restore from disk image

    Im trying to get bootcamp to work but it told me to backup, format and restore. Im currently copying my data to a disk image. Am i able to restore this or is it pointless?
    Thanks

    You can do it your way, but the intended way is to use FileVault to encrypt your Home folder. When you log out of your account then TM will begin the backup of the encrypted Home folder. No need for you to encrypt or decrypt your own disc image.
    If you allow TM to run hourly backups as you now do, then both your Home folder and your backups are not secure.

  • Problems with Disk Utility backup & restore via DMG disk images

    I attempted to backup and restore a 2TB external raid storage device using the recommended Disk Utility procedure for 10.6.6. One of the HDDs in the raid enclosure had started to fail.
    First step was to create a new image from the 2TB device. I accepted the defaults of compressed image format and no encryption. The image took about 15 hours to create, and when complete, I was left with 2 files:
    OWC2TB.dmg (1.1TB)
    OWC2TB.002.dmgpart (486GB).
    To check the DMG I ran the Disk Utility "Verify Disk" on the DMG, and got the message "The volume OWC2TB appears to be OK". The DMG is described in DU as:
    Description: Apple UDIF read-only compressed (zlib)
    Connection Bus: Disk Image
    Total Capacity: 2 TB
    Disk Write Status: Read Only
    Partition Map Scheme: No partition map
    I then replaced the failing HDD in the enclosure, recreated a new 2TB filesystem on the device, and attempted to restore from the DMG image.
    The first attempt was to use Disk Utility "Restore" function. I specified the DMG as the source and the new device as the destination, and chose "Erase Destination". This failed immediately with the error "Restore failure. Could not find any scan information. The source images needs to be imagescanned before it can be restored".
    After researching this error I tried to correct it by selecting the DMG in Disk Utility and running Images => Scan Image for Restore. This failed immediately, complaining there was insufficient disk space. More research revealed it needed the same amount of spare space on the same disk to do an imagescan. So I had to free up an EXTRA 1.5TB of space in addition to the space the DMG consumed. Not very user friendly.
    The next attempt to imagescan the DMG got further than the "insufficient space" error. It displayed "Scanning image OWC2TB.dmg, Block Checksum Partition #1". This ran for about 10 hours. At the end, it displayed a new error message "Unable to scan OWC2TB.dmg (internal error)".
    Next I tried to mount the DMG and copy the files manually. My first attempt at this resulted in a "Verifying..." phase which looked like it will take about 10 hours, so I clicked "Skip". Soon after I got an error message "Unable to attach OWC2TB.dmg (no mountable file systems).". Now I am trying a mount with the Verify option...
    Can anyone suggest what I can try next to restore the DMG?
    I think the problem might be the fact the DMG is split in two parts, but the imagescan/restore software does not know how to read the second part? Is there a way to join these into a single DMG?

    I attempted to backup and restore a 2TB external raid storage device using the recommended Disk Utility procedure for 10.6.6. One of the HDDs in the raid enclosure had started to fail.
    First step was to create a new image from the 2TB device. I accepted the defaults of compressed image format and no encryption. The image took about 15 hours to create, and when complete, I was left with 2 files:
    OWC2TB.dmg (1.1TB)
    OWC2TB.002.dmgpart (486GB).
    To check the DMG I ran the Disk Utility "Verify Disk" on the DMG, and got the message "The volume OWC2TB appears to be OK". The DMG is described in DU as:
    Description: Apple UDIF read-only compressed (zlib)
    Connection Bus: Disk Image
    Total Capacity: 2 TB
    Disk Write Status: Read Only
    Partition Map Scheme: No partition map
    I then replaced the failing HDD in the enclosure, recreated a new 2TB filesystem on the device, and attempted to restore from the DMG image.
    The first attempt was to use Disk Utility "Restore" function. I specified the DMG as the source and the new device as the destination, and chose "Erase Destination". This failed immediately with the error "Restore failure. Could not find any scan information. The source images needs to be imagescanned before it can be restored".
    After researching this error I tried to correct it by selecting the DMG in Disk Utility and running Images => Scan Image for Restore. This failed immediately, complaining there was insufficient disk space. More research revealed it needed the same amount of spare space on the same disk to do an imagescan. So I had to free up an EXTRA 1.5TB of space in addition to the space the DMG consumed. Not very user friendly.
    The next attempt to imagescan the DMG got further than the "insufficient space" error. It displayed "Scanning image OWC2TB.dmg, Block Checksum Partition #1". This ran for about 10 hours. At the end, it displayed a new error message "Unable to scan OWC2TB.dmg (internal error)".
    Next I tried to mount the DMG and copy the files manually. My first attempt at this resulted in a "Verifying..." phase which looked like it will take about 10 hours, so I clicked "Skip". Soon after I got an error message "Unable to attach OWC2TB.dmg (no mountable file systems).". Now I am trying a mount with the Verify option...
    Can anyone suggest what I can try next to restore the DMG?
    I think the problem might be the fact the DMG is split in two parts, but the imagescan/restore software does not know how to read the second part? Is there a way to join these into a single DMG?

  • After restoring System from TM backup is too big for drive

    I had to restore my system from TM recently. When I plugged in the TM drive after restoring it tells me that there's not enough space on the drive to perform the backup.
    Am I just going to have to chuck away the original backups and start a new one, or is there some way I can get the original backup to work again?

    Hi, and welcome to the forums.
    Yes, that's normal behavior, unfortunately. When you erase a disk (done automatically as part of a restore), everything you put back on it is treated as new: http://support.apple.com/kb/TS1338
    You may need a larger drive for your backups. It varies greatly, of course, depending on how you use your Mac, but a "rule of thumb" is that TM needs 2-3 times the space of the data it's backing-up to be able to keep a reasonable "depth" of backups for you.

Maybe you are looking for