Restoring SOA suite on a new host fails.

SOA Suite is 10.1.3.1, and upgrade to 10.1.3.3.1.
this suite run on windows 2003.
I do the restore according to admin guide chapter 18.3.3
but when run the 3rd step
bkp_restore.bat -m node_restore -o inst_register
it prompts:
Service Oracle-OracleSOAServerProcessManager in a state that can't be recreated.
Please remove it manually first.
I have checked, there is no Oracle-OracleSOAServerProcessManager service on the new host.
any suggestion?

Do this.
Stop services in A, make a copy of all Oracle Home, etc/oratab, /var/opt/oracle and so on
and coppy them to the B.
Then in B, restore the copy and make a chmod -R 750 for the complete ORACLE_HOME, then run the root.sh
After that, just make a little change in the host file, and put as an alias the name of A in B.
Then run the script $OH/chgip/scripts/chgiphost.sh -mid
and for the source use a and target use b for name and ip.
Check the log and if it's ok, just remove the name of A in the host file as alias.
Hope this helps.
Regards.

Similar Messages

Restoring on a new host fails.

it is SOA Suite 10.1.3.1, and upgrade to 10.1.3.3.1.
this suite run on windows 2003.
I do the restoring action according to admin guide chapter 18.3.3
but when run the 3rd step:
bkp_restore.bat -m node_restore -o inst_register
it prompts:
Service Oracle-OracleSOAServerProcessManager in a state that can't be recreated.
Please remove it manually first.
I have checked, there is no Oracle-OracleSOAServerProcessManager service on the new host.
what does this means, and how to resolve? any suggestion?

Do this.
Stop services in A, make a copy of all Oracle Home, etc/oratab, /var/opt/oracle and so on
and coppy them to the B.
Then in B, restore the copy and make a chmod -R 750 for the complete ORACLE_HOME, then run the root.sh
After that, just make a little change in the host file, and put as an alias the name of A in B.
Then run the script $OH/chgip/scripts/chgiphost.sh -mid
and for the source use a and target use b for name and ip.
Check the log and if it's ok, just remove the name of A in the host file as alias.
Hope this helps.
Regards.

Installing soa suite 11.1.1.2 failed

Hi,
Failed to install Oracle Soa suite 11.1.1.2.0 on windows XP with DB 11g R1, jdk1.6 update 27 but pre-requisites passed.
Below the log..
Temp Buffer: D:\installed\oracle\Middleware;
middleware homes :1
isDefaultValueChangedfalse
isDefaultValueChangedtrue
oracle home in validateData is Oracle_SOA
middleWare home in validateData is D:\installed\oracle\Middleware\wlserver_10.3
needWritableDirectory: false
In processErrorMsgStringOracle Home Directory
In [email protected]_OracleDirectoryInvalidErrorString
Obtained the single page data..SpecifyInstallLocnWithMWSpecifactionPage
External name..INVALID_ORACLE_DIRECTORY_MSG_STRING
In processErrorMsgStringOracle Home
Entering the exec handler method in get free space for home...
quotaNeededProperty:null
isQuotaNeeded : false
isDefaultValueChangedtrue
oracle home in validateData is Oracle_SOA
middleWare home in validateData is D:\installed\oracle\Middleware
needWritableDirectory: false
In processErrorMsgStringOracle Home Directory
In [email protected]_OracleDirectoryInvalidErrorString
Obtained the single page data..SpecifyInstallLocnWithMWSpecifactionPage
External name..INVALID_ORACLE_DIRECTORY_MSG_STRING
In processErrorMsgStringOracle Home
Entering the exec handler method in get free space for home...
quotaNeededProperty:null
isQuotaNeeded : false
In doFinish method checking for inventory lock...InstallProgressPage
Next page is a progress page and the inventory lock is false
Mode:init
The user provided properties object doesnt have the entry for oracle.installer.startup_location. Checking if the value has been set in the System environment
Notifying Begin:Starting installation
Notifying Begin:Starting installation
Source Loc:E:\software\dump\ofm_soa_generic_11.1.1.2.0_disk1_1of1\Disk1\install\win32\../../stage/products.xml
Notifying Begin:Starting installation
Please help me with your suggestions on how to troubleshoot this issue.
Thanks..

The log doesn't say much... Do you see any other error message?
Have you run RCU and installed Weblogic before installing SOA Suite?
Oracle SOA Suite Installation Roadmap
http://docs.oracle.com/cd/E23943_01/doc.1111/e13925/overview.htm#BABDFJAB
Cheers,
Vlad

SOA suite: configure a new oc4j container, licensing and support

Hi
We have a SOA suite installation (10.1.3.4).
Default installation is containing a OC4J_SOA running the esb, bpel etc.
Now we have a java ear (java web service), and would like to deploy this to a dedicated oc4j container.
So we want to configure a new oc4j instance named oc4j_jws.
Actually, we have already done this, and it is looking good.
Now I only want to make sure the configuration of a new oc4j container is not violating any licensing and support agreements.
We have soa suite license.
I believe a soa suite license allows for configuration of additional oc4j containers.

The adding of oc4j instances is at least well documented within the Oracle Application Server Administrator's Guide:
http://download.oracle.com/docs/cd/B31017_01/core.1013/b28940/reconfig.htm

Using RMAN restore the database on a new host in ASM

Hello All,
I am trying to restore a database without using RMAN database duplicate. I want to do set new name for datafile and rename log file for online logs and change database name at last using NID.
here are details
source database - APSPROD / server - X
target database - EMERALD / Server -Y
Compressed backup is copied to destination server and I am trying to restore database using RMAN. Here is my init.ora file
cat initAPSPROD1.ora
DB_NAME=APSPROD
compatible=11.2.0.3
sga_target=8G
CONTROL_FILES='+DATA_DM01/EMERALD/controlfile/cntrl01.dbf','+RECO_DM01/EMERALD/controlfile/cntrl02.dbf','+DATA_DM01/EMERALD/controlfile/cntrl03.dbf'
DB_BLOCK_SIZE=8192
db_file_name_convert=(+DATA_DM01/APSPROD,+DATA_DM01/EMERALD)
log_file_name_convert=(+DATA_DM01/APSPROD,+DATA_DM01/EMERALD,+RECO_DM01/APSPROD,+RECO_DM01/EMERALD)
DB_RECOVERY_FILE_DEST='+RECO_DM01'
DB_RECOVERY_FILE_DEST_SIZE=5500G
So from above you can see that control file should be restored to +DATA_DM01/EMERALD and +RECO_DM01/EMERALD path.
Question -
when I am trying to restore control file. It creates an ASM alias name in +DATA_DM01/EMERALD/controlfile/cntrl01.dbf',+RECO_DM01/EMERALD/controlfile/cntrl02.dbf',' and +DATA_DM01/EMERALD/controlfile/cntrl03.dbf' but It creates fully Qualified ASM Filename under +DATA_DM01/APSPROD and +RECO_DM01/
Here is output
RMAN> restore controlfile from '/dbfs_direct/FS1/RMAN_APSPROD/cf_APSPROD_i4p4b62m_1_1
2> ;
Starting restore at 02-APR-14
using channel ORA_DISK_1
channel ORA_DISK_1: restoring control file
channel ORA_DISK_1: restore complete, elapsed time: 00:00:07
output file name=+DATA_DM01/emerald/controlfile/cntrl01.dbf
output file name=+RECO_DM01/emerald/controlfile/cntrl02.dbf
output file name=+DATA_DM01/emerald/controlfile/cntrl03.dbf
Finished restore at 02-APR-14
output at ASM level
SMCMD [+RECO_DM01/EMERALD/CONTROLFILE] > ls -l
Type         Redund Striped Time             Sys Name
                                               N    cntrl02.dbf => +RECO_DM01/APSPROD/CONTROLFILE/current.17006.843826701
ASMCMD [+RECO_DM01/EMERALD/CONTROLFILE] > cd +RECO_DM01/APSPROD/CONTROLFILE/
ASMCMD [+RECO_DM01/APSPROD/CONTROLFILE] > ls -l
Type         Redund Striped Time             Sys Name
CONTROLFILE HIGH    FINE     APR 02 12:00:00 Y    current.17006.843826701
ASMCMD [+RECO_DM01/APSPROD/CONTROLFILE] > cd +DATA_DM01
ASMCMD [+DATA_DM01] > cd EMERALD/CONTROLFILE
ASMCMD [+DATA_DM01/EMERALD/CONTROLFILE] > ls -l
Type         Redund Striped Time             Sys Name
                                               N    cntrl01.dbf => +DATA_DM01/APSPROD/CONTROLFILE/current.3678.843826699
                                               N    cntrl03.dbf => +DATA_DM01/APSPROD/CONTROLFILE/current.3679.843826701
ASMCMD [+DATA_DM01/EMERALD/CONTROLFILE] > cd +DATA_DM01/APSPROD/CONTROLFILE
ASMCMD [+DATA_DM01/APSPROD/CONTROLFILE] > ls -l
Type         Redund Striped Time             Sys Name
CONTROLFILE HIGH    FINE     APR 02 12:00:00 Y    current.3678.843826699
CONTROLFILE HIGH    FINE     APR 02 12:00:00 Y    current.3679.843826701
How can I ensure that every thing gets created in +DATA_DM01/EMERALD/ or [+RECO_DM01/EMERALD?? similary for datafile restore even I have used set new file name ASM fully quilified OMF datafile gets created under +DATA_DM01/APSPROD/
ASMCMD [+DATA_DM01/EMERALD/DATAFILE]
N    undots5_01.dbf => +DATA_DM01/APSPROD/DATAFILE/APPS_UNDOTS5.3669.843818269
Thanks
PV

Even If I explicitly say
rman target / nocatalog
RMAN> restore controlfile to '+DATA_DM01/emerald/controlfile/cntrl01.dbf' from '/dbfs_direct/FS1/RMAN_APSPROD/cf_APSPROD_i4p4b62m_1_1';
Starting restore at 02-APR-14
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=64 device type=DISK
channel ORA_DISK_1: restoring control file
channel ORA_DISK_1: restore complete, elapsed time: 00:00:03
Finished restore at 02-APR-14
It create as alias name +DATA_DM01/emerald/controlfile/cntrl01.dbf' pointing to +DATA_DM01/APSPROD/CONTROLFILE/
ASMCMD [+DATA_DM01/EMERALD/CONTROLFILE] > ls -l
Type         Redund Striped Time             Sys Name
                                               N    cntrl01.dbf => +DATA_DM01/APSPROD/CONTROLFILE/current.3679.843828927
ASMCMD [+DATA_DM01/EMERALD/CONTROLFILE] > cd +DATA_DM01/APSPROD
ASMCMD [+DATA_DM01/APSPROD] > cd CONTROLFILE
ASMCMD [+DATA_DM01/APSPROD/CONTROLFILE] > ls -l
Type         Redund Striped Time             Sys Name
CONTROLFILE HIGH    FINE     APR 02 12:00:00 Y    current.3679.843828927
ASMCMD [+DATA_DM01/APSPROD/CONTROLFILE] >

Oracle SOA Suite 11g Technology Preview 3 fails to install on OEL5

I did everything up to this point (See below). Any ideas?
Regards,
Richard Catlin
start-oc4j:
[echo] ==Starting standalone oc4j. Check server log /home/rcatlin/jdeveloper/system11.1.1.0.22.47.96/o.j2ee/embedded-oc4j/log/startsoa.log.
[echo] ==Waiting max 420 second(s) for startup of URL http://rcatlin-pc.:8888...
[exec] Result: 7
[echo]
[echo] ***************************************************
[echo] * Configuring SOA Infrastructure has FAILED. *

Hi,
there is a forum for JDeveloper / OC4J 11 related question
JDeveloper and OC4J 11g Technology Preview
Frank

Install SOA Suite 10.1.3.1 fails with a 'Unable to create home "oracleas1"

each time I try to install in shows this error:
Unable to create home "oracleas1" at "C:\product\10.1.3.1\OracleAS_1". There are existing homes with the same name and the same location.
I previously had the preview release on this machine, but I uninstalled it and removed the directory. I also checked the windows registry, but it appears to be clean.
After the error message there is a C:\product\10.1.3.1\OracleAS_1\install.platform. Any ideas?
Thanks,
Bret

Vipin,
Thanks for the reply. However, the environment variable ORACLE_HOME was not set. Remember I had looked through the registry to make sure it was clean. This included the environment variables that are defined therein.
I did get around this problem by not using the default install path. I changed c:\product to a different directory name and it work. It is strange that it had a problem with the same path that the previous SOA preview was installed to. Since the directory was not there and I could not find anything in the registry. There must be a file in the %WINDOWS% directory that has information about other oracle installs. At least that is my guess. It is apparent that a deinstall does not remove everything :)

Restoring Backup Set to New Host

Hi Team,
I am working on the RMAN Restore operation on the New Host.
I had taken the hot backup of my database (name :Test) with all ControlFile, DataFile, & Archivelog Files using RMAN backup command,
RMAN>backup database plus archivelog;
Now I want to restore this backup set on the New host.
So for this I have same Oracle 9i version installed in the same production path as it was there in the old host.
i.e same production path for oracle directory.. C:/oracle/
Now I had created the new database in this new host with the same name as Test and also the same passwords
Now if I am using my restore controlfile commands here then it works properly as ,
RMAN> restore controlfile from 'E:\Tempdest\CTL_C-315497057-20061017-01';
Starting restore at 17-OCT-06
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=11 devtype=DISK
channel ORA_DISK_1: restoring controlfile
channel ORA_DISK_1: restore complete
replicating controlfile
input filename=D:\ORACLE\ORADATA\TEST\CONTROL01.CTL
output filename=D:\ORACLE\ORADATA\TEST\CONTROL02.CTL
output filename=D:\ORACLE\ORADATA\TEST\CONTROL03.CTL
Finished restore at 17-OCT-06
But if i mount the database to restore the datafiles it is giving me the following error.
RMAN> startup mount;
database is already started
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of startup command at 10/17/2006 18:34:14
ORA-01991: invalid password file 'D:\oracle\ora92\DATABASE\PWDtest.ORA'
Can anybody help in this?
Whether we have to backup the Password files also ?
plz comment..
Message was edited by:
Test_Rman

You do not need to create the database on the new host ahead of time. However, since you are on Windows, you should create the Window's Oracle service with oradim.
If your intention is to simulate an actual restore to a different host, then you should refer to Restoring the Database to a New Host, otherwise Aron's link above should help.

Restore to new host from tape

Hello!
Oracle 10.2.0.2
Linux x86 Red Hat Enterprise
Netbackup 6.0
Netbackup 6.0 MP5
Netbackup Oracle Agent
Production server; 2,5 TB
Hello
Id like to restore a backup from tape to another host
But i am having doubts regarding the restore script, ive done a channel for maintenance with success, so i think netbackup is okey installed.
Now i want to restore a backup to the new host, witch has been pre-configured with same catalogues, and oracle binaries.
Before this script i will manually restore spfile and put the database in nomount, and set DBID
run
ALLOCATE CHANNEL ch0 type 'SBT_TAPE';
ALLOCATE CHANNEL ch1 type 'SBT_TAPE';
RESTORE controlfile from autobackup;
ALTER DATABASE mount;
RESTORE database;
RECOVER database;
ALTER DATABASE OPEN RESETLOGS;
RELEASE CHANNEL ch0;
RELEASE CHANNEL ch1;
}When i enter this script, i guess netbackup wont allow me to come and claim a backup from someone else, so i have configured netbackup master server to cllow restore to alternate host, and i have configured this new host to trick netbackup that he is the old one (NB_ORA_CLIENT), but im having doubts about the parms parameter in rman, i think i need to define the policy somewhere, but i dont know where. Have any of you completet a similiar task once, then maybe u can shed light on me.
Thanks!

siva_pappu wrote:
Hi,
Have you tried the restore? If yes and any errors received, post them to get the help.
Some information is required to finalize the script.
Up to what time you want to restore and recover? depending on it, you have to use "set the until time " clause.
you are trying to restore control file from backup, so "RECOVER database" will not work. have to use "recover database using backup control file until scn/until time '<time>'/until scn". To know about all the options, refer manuals, metalink, etc.
in the env params, I guess policy is not required.
example script:
run
set until time "to_date('10-apr-2010 10:00:00','DD-mon-YYYY hh24:mi:ss')" ;
ALLOCATE CHANNEL ch0 TYPE 'SBT_TAPE' PARMS 'ENV=(NB_ORA_SERV=master_serv, NB_ORA_CLIENT=client_where_backup_was_taken)';
ALLOCATE CHANNEL ch1 TYPE 'SBT_TAPE' PARMS 'ENV=(NB_ORA_SERV=see above, NB_ORA_CLIENT=see above)';
RESTORE controlfile from autobackup;
ALTER DATABASE mount;
RESTORE database;
restore archive log from seq <start number> until seq <end seq> ;
RECOVER database using backup control file;
ALTER DATABASE OPEN RESETLOGS;
RELEASE CHANNEL ch0;
RELEASE CHANNEL ch1;
The archive logs required for recovery can be identified from your source database v$archived_log based on the recove until time.
Thanks,
SivaOk, i didnt think about that, i guess what i want to do is using backup controlfile until cancel. Wont he go into the tape and find the needed redo logs himself, i did not know that i needed to restore them to my disk before?

Composite application deployment error : SOA SUITE 11g

when trying to deploy a composite application to soa suite 11g, below error is occured. I read related threads on forum, then tried and checked everthing mentioned on them. but no luck, the problem is still the same.
i am using Ubuntu 9.1, and installation order is weblogic server-rcu drop then create DB schemas-install soa suite by defining new domain. I also checked administrator user and newly created user which is assigned as SOAAdmin and SOAOperator.
could anyone help on the same please?
the last success messages ::
MDS-10014 - import is completed. Total number of documents successfully processed : 19, total number of documents failed : 0.
SOA-21045 - Calling coordinator to deploy default/Helloworld!1.0*f3bec318-d208-435d-bba7-86a496eec86c, with isForceDefault flag: true
then failure messages ::
WSM-06108 - Error initializing the Oracle WSM Policy Resolver because incorrect configuration is passed: {0} {1}.
OWS-00532 - Failed to retrieve policy
SOA-20003 - Unable to register service.
SOA-21037 - Sending back error message: Error during deployment: Deployment Failed: Unable to register service...

the solution is given below
http://blogs.eteration.com/blog/?p=365

Single SOA Suite Install with multiple oc4j instances and java processes

We right now have 5 BPEL processes and 5 ESB processes all running under one java.exe process. We would like to seperate some of
them out into their own java.exe processes without having to install more
%ORACLE_HOME% instances of SOA Suite. I can create an oc4j instance but of
course it doesn't have any SOA Suite stuff deployed to it. I tried to see what
the install would do with this new oc4j instance but it wants to create a new
%ORACLE_HOME% with an entire installation of SOA Suite.
Is there some sort of way to clone oc4j instances that have SOA Suite deployed to them so that you
don't need multiple %ORACLE_HOME% instances?
### How is this Issue Impacting Your Business ###
We really don't want to have a lot of %ORACLE_HOME% instances to have to maintain. We are
migrating projects over from our current integration server product and we'll
have potentially dozens more BPEL and ESB projects. We definitely want to
group and isolate projects so that outages of one project do not bring down
others that are unrelated.
We are currently experiencing periodic problems with one BPEL project that requires recycling but all the other BPEL and ESB
projects get recycled also. If we could put this project into it's own java
process without creating another SOA SUITE instance, it would be a big
help.
ANSWER
=======
You can create multiple domains in BPEL or create multiple systems/groups in ESB to group different projects.
MY REPLY:
=========
We have been using systems/groups in ESB but they all run under the save java.exe process. I would assume that having a seperate domain in BPEL would also run in that same java.exe process.
Right now, the one BPEL project we have a problem with will gobble up all the JDBC connections from time to time and that requires a recycle of SOA Suite, which means all BPEL and ESB projects that run in that java.exe process get recycled also. We're working that issue in a different ticket.
It would be nice if the SOA Suite installation would install against a new oc4j instance and not assume it has to create a complete %ORACLE_HOME% instance. The components of SOA Suite seem to be J2EE based components.
Scenario: I already have an oc4j instance called oc4j_soa and a complete %ORACLE_HOME% installation of soa suite. I then create a new oc4j instance from Enterprise Manager. Then I would deploy the esb-dt, esb-rt, orabpel, etc. components of SOA Suite to that new oc4j instance and modify the necessary config file so that it can work with OHS and the SOA Suite Databases. Is this possible?
Does anyone have any experience with this or do people typically install multiple complete installation of SOA Suite with mulitple Oracle Homes?

Hi,
yes, on metalink you get in touch with real experts....
You have to install serveral application servers to get different ORACLE_HOMEs.
For each one, you can install a BPEL PM.
But: For each BPEL PM you need your own database instance, or you have to configure them as a clustered BPEL installation.... (but i do not know if this work with non RAC DBs)

'Start SOA Suite' fails after laptop restart.

Hi I have an issue starting SOA Suite on a laptop running vista.
I installed SOA Suite 10.1.3.1 this completed successfully including config assistants.
Have added JDK1.5.15, (added new JDK to C:\product\10.1.3.1\OracleAS_1)
From the start menu select 'Start SOA suite'..
This originally worked fine and I could see all the correct BPEL Console windows etc..
I then restarted my machine and I get the following when attempting to 'Start SOA Suite'..
A box pops up 'Starting Oracle application server'.. However when we get to 67% started, we get the following
There are some errors while stopping the following components. Refer to the generated error report for more details.
==================================================
ias-component: default_group
process-type: home
process-set: default_group
Error Message:failed to start a managed process after the maximum retry limit
==================================================
when I view the log file in \opmn\logs\ we see the error
08/06/03 13:33:44 Start process
Error occurred during initialization of VM
Could not reserve enough space for object heap
08/06/03 13:33:46 Start process
Error occurred during initialization of VM
Could not reserve enough space for object heap
08/06/03 13:33:48 Start process
Error occurred during initialization of VM
Could not reserve enough space for object heap
Does anyone have an idea about this error
BTW: I am running DHCP also which may be an issue..
Cheers
Will

I have tried the installation again having done the follwoing as recommended:
1.Disabled IPv6 on the loopback adapter by going to control panel -> network and sharing centre -> view status on loopback network-> Click on properties in status window - > uncheck the ipv4 item
2. Removed the ::1 localhost entry from the hosts file
3. Restarted
4. Tried advanced installation onto XE DB
This still does not work !!
I now get the Oracle application server config assistant failing with:
================================================================================================================
Output generated from configuration assistant "Oracle Application Server Configuration Assistant":
java.lang.NoClassDefFoundError: oracle/sysman/ias/studio/installer/ASControlConfigAssistant
Exception in thread "main"
Configuration assistant "Oracle Application Server Configuration Assistant" failed
================================================================================================================
.. As this is optional the config assistant moves onto the following assistants however it STILL fails on the BPEL Process manager Config assistant with the same
Failed at "Could not get DeploymentManager".
This is typically the result of an invalid deployer URI format being supplied, the target server not being in a started state or incorrect authentication details being supplied.
More information is available by enabling logging -- please see the Oracle Containers for J2EE Configuration and Administration Guide for details.
Configuration assistant "Oracle BPEL Process Manager Configuration Assistant" was canceled.
Why is this not working I seem to have do all steps recommended any ideas would be appreciated
Thanks again
Will

[HELP] Problem with restore and recovery to new host

Hi, guys!
I have been trying for two days, but still cannot get it to work.
I have taken a full hot(online) backup with archive logs as well as the control file and SPFILE, and then copied the backup to the new host with the same directory structure and settings. Finally, I have tried to restore & recover the database on the new host but failed during the restore process.
Both the original host and the new host have the same Oracle installed down to the patch level. I couldn't figure out the proper solution to this problem base on my limited knowledge about Oracle DB.
Could anyone help me out here? Any advice would be appreciated!
RMAN> restore database until sequence 10 thread 1;
Starting restore at 08-NOV-11
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to D:\DBDATA\PRODDB\SYSTEM01.DBF
restoring datafile 00002 to D:\DBDATA\PRODDB\UNDOTBS01.DBF
restoring datafile 00003 to D:\DBDATA\PRODDB\SYSAUX01.DBF
restoring datafile 00004 to D:\DBDATA\PRODDB\USERS01.DBF
restoring datafile 00005 to D:\ORA_DATADATA01.DBF
restoring datafile 00006 to D:\ORA_DATA\DATA02.DBF
restoring datafile 00007 to D:\ORA_DATA\INDX01.DBF
restoring datafile 00008 to D:\ORA_DATA\INDX02.DBF
channel ORA_DISK_1: reading from backup piece C:\ORACLE\PRODUCT\10.2.0\FLASH_REC
OVERY_AREA\PRODDB\BACKUPSET\2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_.BK
P
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/08/2011 11:41:33
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
Here is some extra information that you might want to know about:
RMAN> list incarnation;
List of Database Incarnations
DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
1 1 PRODDB 3774691295 PARENT 1 17-APR-07
2 2 PRODDB 3774691295 PARENT 521803 06-OCT-11
3 3 PRODDB 3774691295 PARENT 1595143 20-OCT-11
4 4 PRODDB 3774691295 PARENT 1600974 20-OCT-11
5 5 PRODDB 3774691295 PARENT 1952053 27-OCT-11
6 6 PRODDB 3774691295 CURRENT 2146951 07-NOV-11
RMAN> list backup recoverable;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
37 Full 822.34M DISK 00:29:47 07-NOV-11
BP Key: 37 Status: AVAILABLE Compressed: NO Tag: TAG20111107T175037
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\BACKUPSET\
2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_.BKP
List of Datafiles in backup set 37
File LV Type Ckp SCN Ckp Time Name
1 Full 2149673 07-NOV-11 D:\DBDATA\PRODDB\SYSTEM01.DBF
2 Full 2149673 07-NOV-11 D:\DBDATA\PRODDB\UNDOTBS01.DBF
3 Full 2149673 07-NOV-11 D:\DBDATA\PRODDB\SYSAUX01.DBF
4 Full 2149673 07-NOV-11 D:\DBDATA\PRODDB\USERS01.DBF
5 Full 2149673 07-NOV-11 D:\ORA_DATA\DATA01.DBF
6 Full 2149673 07-NOV-11 D:\ORA_DATA\DATA02.DBF
7 Full 2149673 07-NOV-11 D:\ORA_DATA\INDX01.DBF
8 Full 2149673 07-NOV-11 D:\ORA_DATA\INDX02.DBF
BS Key Type LV Size Device Type Elapsed Time Completion Time
38 Full 6.95M DISK 00:00:03 07-NOV-11
BP Key: 38 Status: AVAILABLE Compressed: NO Tag: TAG20111107T182034
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
\2011_11_07\O1_MF_S_766606834_7CH8Q439_.BKP
Control File Included: Ckp SCN: 2151141 Ckp time: 07-NOV-11
SPFILE Included: Modification time: 07-NOV-11
BS Key Size Device Type Elapsed Time Completion Time
39 18.46M DISK 00:00:05 08-NOV-11
BP Key: 39 Status: AVAILABLE Compressed: NO Tag: TAG20111108T093359
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\BACKUPSET\
2011_11_08\O1_MF_ANNNN_TAG20111108T093359_7CJY7TG1_.BKP
List of Archived Logs in backup set 39
Thrd Seq Low SCN Low Time Next SCN Next Time
1 1 2146951 07-NOV-11 2149493 07-NOV-11
1 2 2149493 07-NOV-11 2149519 07-NOV-11
1 3 2149519 07-NOV-11 2149565 07-NOV-11
1 4 2149565 07-NOV-11 2149641 07-NOV-11
1 5 2149641 07-NOV-11 2172859 07-NOV-11
1 6 2172859 07-NOV-11 2197851 07-NOV-11
1 7 2197851 07-NOV-11 2220349 08-NOV-11
1 8 2220349 08-NOV-11 2222621 08-NOV-11
1 9 2222621 08-NOV-11 2222729 08-NOV-11
1 10 2222729 08-NOV-11 2223088 08-NOV-11
BS Key Type LV Size Device Type Elapsed Time Completion Time
40 Full 6.95M DISK 00:00:00 08-NOV-11
BP Key: 40 Status: AVAILABLE Compressed: NO Tag: TAG20111108T093411
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
\2011_11_08\O1_MF_S_766661651_7CJY84LK_.BKP
Control File Included: Ckp SCN: 2223097 Ckp time: 08-NOV-11
SPFILE Included: Modification time: 08-NOV-11
Thanks in advance!
Jay

Thank you for your reply,Hemant K Chitale!
>
a) Does the directory structur exist on the new server :
D:\DBDATA\PRODDB\ --- for files 1 to 4
D:\ --- for file 5
D:\ORA_DATA\ --- for files 6 to 8
>
Yep, I have doubled check the directory structure that get in the way, and they are all exist.
Would it be something to do with the folder permissions?
>
b) Apparently a RESETLOGS has been issued on 07-Nov. Which controflile backup do you have restored and mounted on the new server ? It should be the one after the RESETLOGS.
>
I restored the one included with the backup. Should I take another backup of controlfile seperately and restore from it instead?
>
(I assume that you did a RESTORE CONTROLFILE followed by sql "alter database mount" before the attempt to RESTORE DATABASE)
>
Yep, that's exactly what I did.
//executed @ RMAN prompt of the new host
startup nomount; 'the new host has the right SPFILE to start with so i didn''t bother to RESTORE SPFILE first.
restore controlfile from autobackup;
alter database mount;
restore database sequence 10 thread 1;
//get stucked here with RMAN-06026, 06023
//...the following is not executed yet.... :-(
recover database until sequence 10;
alter database open resetlogs;Edited by: HappyJay on 2011/11/08 13:25
I have made several attemps with your advice, but still get the same type of errors.
Here is the output:
RMAN> list backup of controlfile;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
38 Full 6.95M DISK 00:00:03 07-NOV-11
BP Key: 38 Status: AVAILABLE Compressed: NO Tag: TAG20111107T182034
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
\2011_11_07\O1_MF_S_766606834_7CH8Q439_.BKP
Control File Included: Ckp SCN: 2151141 Ckp time: 07-NOV-11
BS Key Type LV Size Device Type Elapsed Time Completion Time
40 Full 6.95M DISK 00:00:00 08-NOV-11
BP Key: 40 Status: AVAILABLE Compressed: NO Tag: TAG20111108T093411
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
+\2011_11_08\O1_MF_S_766661651_7CJY84LK_.BKP+
Control File Included: Ckp SCN: 2223097 Ckp time: 08-NOV-11
as you suggested, this backup piece of controlfile should be right one to be restored.
RMAN> shutdown;
database dismounted
Oracle instance shut down
RMAN> startup nomount;
connected to target database (not started)
Oracle instance started
Total System Global Area 490733568 bytes
Fixed Size 1291360 bytes
Variable Size 364907424 bytes
Database Buffers 121634816 bytes
Redo Buffers 2899968 bytes
RMAN> restore controlfile from autobackup;
Starting restore at 08-NOV-11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=157 devtype=DISK
recovery area destination: C:\oracle\product\10.2.0\flash_recovery_area
database name (or database unique name) used for search: PRODDB
channel ORA_DISK_1: autobackup found in the recovery area
channel ORA_DISK_1: autobackup found: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AR
EA\PRODDB\AUTOBACKUP\2011_11_08\O1_MF_S_766661651_7CJY84LK_.BKP
channel ORA_DISK_1: control file restore from autobackup complete
output filename=D:\DBDATA\PRODDB\CONTROL01.CTL
output filename=D:\DBDATA\PRODDB\CONTROL02.CTL
output filename=D:\DBDATA\PRODDB\CONTROL03.CTL
Finished restore at 08-NOV-11
tried shutdown normally and mount again instead.
RMAN> shutdown;
Oracle instance shut down
RMAN> exit
Recovery Manager complete.
C:\>rman target /
Recovery Manager: Release 10.2.0.3.0 - Production on Tue Nov 8 13:49:42 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database (not started)
RMAN> startup mount;
Oracle instance started
database mounted
Total System Global Area 490733568 bytes
Fixed Size 1291360 bytes
Variable Size 369101728 bytes
Database Buffers 117440512 bytes
Redo Buffers 2899968 bytes
RMAN> restore database until sequence 10 thread 1;
Starting restore at 08-NOV-11
Starting implicit crosscheck backup at 08-NOV-11
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=156 devtype=DISK
Crosschecked 3 objects
Finished implicit crosscheck backup at 08-NOV-11
Starting implicit crosscheck copy at 08-NOV-11
using channel ORA_DISK_1
Crosschecked 2 objects
Finished implicit crosscheck copy at 08-NOV-11
searching for all files in the recovery area
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP\2011_11_
08\O1_MF_S_766661651_7CJY84LK_.BKP
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to D:\DBDATA\PRODDB\SYSTEM01.DBF
restoring datafile 00002 to D:\DBDATA\PRODDB\UNDOTBS01.DBF
restoring datafile 00003 to D:\DBDATA\PRODDB\SYSAUX01.DBF
restoring datafile 00004 to D:\DBDATA\PRODDB\USERS01.DBF
restoring datafile 00005 to D:\ORA_DATA\DATA01.DBF
restoring datafile 00006 to D:\ORA_DATA\DATA02.DBF
restoring datafile 00007 to D:\ORA_DATA\INDX01.DBF
restoring datafile 00008 to D:\ORA_DATA\INDX02.DBF
channel ORA_DISK_1: reading from backup piece C:\ORACLE\PRODUCT\10.2.0\FLASH_REC
OVERY_AREA\PRODDB\BACKUPSET\2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_.BK
P
failover to previous backup
//however, still get the same results(ended up with errors)
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/08/2011 13:50:29
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
Edited by: HappyJay on 2011/11/08 13:59

Listener error while restoring to new host

I'm trying to restore a production database to a new host using a complete RMAN backup following these instructions:
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmrecov.htm#i1006453
I'm trying to force the database to start in NOMOUNT so I can restore the control files, then the data files. I took a crack at editing the initialization file, but I'm not sure I got things right, as I'm trying to restore a single-node RAC to a non-RAC system. Both servers are Windows.
I'm getting the following error:
RMAN> startup force nomount pfile='D:\Oracle\product\10.2.0\TSBAK\database\initt
sbak.ora';
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of startup command at 04/21/2010 14:01:19
RMAN-04014: startup failed: ORA-01078: failure in processing system parameters
RMAN-04017: startup error description: ORA-00119: invalid specification for syst
em parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_TSBAK'This is the listener (I just ran the net configuration wizard)
# listener.ora Network Configuration File: D:\oracle\product\10.2.0\TSBAK\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER_TSBAK =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = D:\oracle\product\10.2.0\TSBAK)
      (PROGRAM = extproc)
LISTENER_TSBAK =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = TSSQL2008B)(PORT = 1521))
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
)This is the init.ora file
*.__db_cache_size=343932928
*.__java_pool_size=209715200
*.__large_pool_size=8388608
*.__shared_pool_size=209715200
*.__streams_pool_size=8388608
*._optimizer_connect_by_cost_based=false
*.audit_file_dest='D:\Oracle\product\10.2.0\admin\TSBAK\ADUMP'
*.background_dump_dest='D:\Oracle\product\10.2.0\admin\TSBAK\BDUMP'
*.cluster_database=FALSE
*.cluster_database_instances=1
*.compatible='10.2.0.1.0'
*.control_files='+DATA/tsbak/controlfile/current.260.591973329'
*.core_dump_dest='D:\Oracle\product\10.2.0\admin\TSBAK\CDUMP'
*.db_block_size=8192
*.db_create_file_dest='+DATA'
*.db_file_multiblock_read_count=16
*.db_files=1024# INITIAL
*.db_name='TS'
*.global_names=FALSE
##clustdb1.instance_name='TS1'
*.instance_number=1
##clustdb1.instance_number=1
*.java_pool_size=209715200
*.job_queue_processes=10
*.large_pool_size=8388608
##clustdb1.local_listener='LISTENER_TSBAK'
*.local_listener='LISTENER_TSBAK'
*.log_archive_dest_1='LOCATION=+DATA/TSBAK/'
*.log_archive_format='ARC%S_%R.%T'
*.log_buffer=8192# INITIAL
*.log_checkpoint_interval=10000
*.max_dump_file_size='10240'# limit trace file size to 10 K each
*.nls_timestamp_format='YYYY-MM-DD HH24:MI.SS.FF'
*.open_cursors=300
*.open_links=4
*.parallel_max_servers=5
*.pga_aggregate_target=203423744
*.processes=250# INITIAL
*.remote_listener='LISTENER_TSBAK'
*.remote_login_passwordfile='EXCLUSIVE'
##clustdb1.remote_login_passwordfile='exclusive'
*.sga_max_size=1317011456
*.sga_target=788529152
*.shared_pool_size=209715200
*.smtp_out_server='mail.mt.net:25'
*.thread=1
##clustdb1.thread=1
*.undo_management='AUTO'# For automatic undo management
*.undo_tablespace='UNDOTBS1'
##clustdb1.undo_tablespace='UNDOTBS1'
*.user_dump_dest='D:\Oracle\product\10.2.0\admin\TSBAK\UDUMP'I am not sure which piece has the error, but would appreciate some help. This is one of the few steps that there isn't much mention of in the guide.

okay moving on. I got previous error corrected (the directories hadn't been created yet). Now, I'm facing a new one and I did a copy/paste of the directory string, so I know it's valid.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of startup command at 04/22/2010 12:13:34
RMAN-04014: startup failed: ORA-16024: parameter LOG_ARCHIVE_DEST_1 cannot be parsedthe parameter is:
*.log_archive_dest_1='D:\Oracle\product\10.2.0\TSBAK\database\archive'Can someone see what I'm doing wrong here?

Failed to initialize the application 'soa-infra' for SOA suite 11g

Hello experts!
Having followed the steps in http://www.packtpub.com/article/installation-configuration-oracle-soa-suite-11g-1,
upon starting the cmd scripts, I received among others the following error message:
<BEA-149205> <Failed to initialize the application 'soa-infra' due to error java.lang.NoSuchMethodError: weblogic.application.ApplicationLifecycleEvent.getDeploymentOperation()Lweblogic/application/DeploymentOperationType;.
java.lang.NoSuchMethodError: weblogic.application.ApplicationLifecycleEvent.getDeploymentOperation()Lweblogic/application/DeploymentOperationType;
     at oracle.security.jps.wls.listeners.JpsApplicationLifecycleListener.preStart(JpsApplicationLifecycleListener.java:76)
     at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:277)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:194)
     at weblogic.application.internal.flow.BaseLifecycleFlow.preStart(BaseLifecycleFlow.java:57)
     at weblogic.application.internal.flow.HeadLifecycleFlow.prepare(HeadLifecycleFlow.java:279)
     at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:609)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
     at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:185)
     at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:53)
     at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
     at weblogic.deploy.internal.targetserver.AppDeployment.prepare(AppDeployment.java:141)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:39)
     at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
     at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
     at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
java.lang.NoSuchMethodError:
I have searched but only to find a change permissions hint which did not work for me. SOA 11g - SOA-INFRA is not starting
Any helping hand available?
Thank you very much in advance!
The fuller log follows:
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <WebLogicServer> <Hera> <> <main> <> <> <> <1270482051581> <BEA-000214> <WebLogic Server "soa_server1" version:
WebLogic Server 10.3.1.0 Thu Jun 11 00:26:56 EDT 2009 1227385 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Notice> <Log Management> <Hera> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1270482051644> <BEA-170019> <The server log file C:\Oracle\Middleware\home_11gR1\user_projects\domains\domain1\servers\soa_server1\logs\soa_server1.log is opened. All server side log events will be written to this file.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Log Management> <Hera> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1270482051644> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Diagnostics> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051691> <BEA-320001> <The ServerDebug service initialized successfully.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Store> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051753> <BEA-280050> <Persistent store "WLS_DIAGNOSTICS" opened: directory="C:\Oracle\Middleware\home_11gR1\user_projects\domains\domain1\servers\soa_server1\data\store\diagnostics" writePolicy="Disabled" blockSize=512 directIO=false driver="wlfileio2">
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "t3" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "t3s" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "http" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "https" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "iiop" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "iiops" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "ldap" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "ldaps" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "cluster" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051831> <BEA-002622> <The protocol "clusters" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051847> <BEA-002622> <The protocol "snmp" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051847> <BEA-002622> <The protocol "admin" is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051847> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <RJVM> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051862> <BEA-000570> <Network Configuration for Channel "soa_server1"
Listen Address          :8001
Public Address          N/A
Http Enabled          true
Tunneling Enabled     false
Outbound Enabled     false
Admin Traffic Enabled     true>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051878> <BEA-002609> <Channel Service initialized.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Socket> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051878> <BEA-000406> <NTSocketMuxer was built on Jan 13 2005 17:47:03
>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Socket> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051941> <BEA-000436> <Allocating 5 reader threads.>
####<5 Απρ 2010 6:40:51 μμ EEST> <Info> <Socket> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482051942> <BEA-000446> <Native IO Enabled.>
####<5 Απρ 2010 6:40:52 μμ EEST> <Info> <IIOP> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482052098> <BEA-002014> <IIOP subsystem enabled.>
####<5 Απρ 2010 6:40:53 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482053408> <BEA-090894> <Successfully loaded the OPSS Policy Provider using oracle.security.jps.internal.policystore.JavaPolicyProvider.>
####<5 Απρ 2010 6:40:53 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482053704> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
####<5 Απρ 2010 6:40:53 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482053751> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_VFJSY8asFO+H8NVntiPFSkiIk0o=>
####<5 Απρ 2010 6:40:53 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482053923> <BEA-090516> <The Authorizer provider has preexisting LDAP data.>
####<5 Απρ 2010 6:40:53 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482053985> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Top".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.DomainRealmScope".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.RegistryScope".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PKITypeScope".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLTypeScope".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLPartner".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Credential".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.CredentialMap".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLEntry".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054001> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLAssertingParty".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.BEASAMLRelyingParty".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PasswordCredential".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.UserPasswordCredential".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PasswordCredentialMap".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.ResourceMap".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.PKIResourceMap".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054016> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSCertRegEntry".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSCredMapCollectionInfo".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSPolicyCollectionInfo".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.WLSRoleCollectionInfo".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLAuthorizationPolicy".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.XACMLRoleAssignmentPolicy".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Endpoint".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Partner".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054032> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SPPartner".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054048> <BEA-000000> <Parsing class "com.bea.common.security.store.data.IdPPartner".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054048> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SAML2CacheEntry".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054048> <BEA-000000> <Parsing class "com.bea.common.security.store.data.SchemaVersion".>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054453> <BEA-090516> <The CredentialMapper provider has preexisting LDAP data.>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054469> <BEA-090516> <The RoleMapper provider has preexisting LDAP data.>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054578> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server soa_server1 for security realm myrealm.>
####<5 Απρ 2010 6:40:54 μμ EEST> <Notice> <Security> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054578> <BEA-090082> <Security initializing using security realm myrealm.>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <Server> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054750> <BEA-002622> <The protocol "[snmp, https, t3, cluster-broadcast-secure, ldaps, cluster-broadcast, ldap, http, iiop, admin, t3s, iiops]" is now configured.>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <XML> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054750> <BEA-130036> <Initializing XMLRegistry.>
####<5 Απρ 2010 6:40:54 μμ EEST> <Info> <messaging.interception> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482054765> <BEA-400000> <Initializing message interception service>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <Store> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055015> <BEA-280050> <Persistent store "_WLS_soa_server1" opened: directory="C:\Oracle\Middleware\home_11gR1\user_projects\domains\domain1\servers\soa_server1\data\store\default" writePolicy="Direct-Write" blockSize=512 directIO=true driver="wlfileio2">
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JDBC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055249> <BEA-001135> <Initializing the JDBC service.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JDBC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055249> <BEA-001137> <Initialization complete.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JDBC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055249> <BEA-001138> <Resuming the JDBC service.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JDBC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055249> <BEA-001140> <Resume complete.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <Connector> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055264> <BEA-190000> <Initializing J2EE Connector Service>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <Connector> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055280> <BEA-190001> <J2EE Connector Service initialized successfully>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055327> <BEA-040305> <JMS service is initialized and in standby mode.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055342> <BEA-040090> <Deployed 8 default connection factories.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory2" with its JNDI name "weblogic.jms.XAConnectionFactory2" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "MessageDrivenBeanConnectionFactory" with its JNDI name "weblogic.jms.MessageDrivenBeanConnectionFactory" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "DefaultConnectionFactory" with its JNDI name "weblogic.jms.ConnectionFactory" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "TopicConnectionFactory" with its JNDI name "javax.jms.TopicConnectionFactory" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory" with its JNDI name "weblogic.jms.XAConnectionFactory" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory0" with its JNDI name "weblogic.jms.XAConnectionFactory0" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "QueueConnectionFactory" with its JNDI name "javax.jms.QueueConnectionFactory" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory1" with its JNDI name "weblogic.jms.XAConnectionFactory1" is started.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMS> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055374> <BEA-040306> <JMS service is active now.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <HTTP> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055389> <BEA-101128> <Initializing HTTP services.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <HTTP> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055405> <BEA-101135> <soa_server1 is the default Web server.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <HTTP> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055405> <BEA-101052> <[HttpServer (defaultWebserver) name: soa_server1] Initialized>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <HTTP> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055405> <BEA-101129> <Initializing the Web application container.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: Logging service enabled.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: TC Configuration Helper instantiated!>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: TC Task Manager instantiated!>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: TC security service instantiated!>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: TC Outbound routing service instantiated!>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WTC> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055420> <BEA-180046> <INFO: TC Transaction service instantiated!>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WebService> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055436> <BEA-220031> <The server does not support reliable SOAP messaging.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WebService> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055436> <BEA-220027> <Web Service reliable agents are started on the server.>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <JMX> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055467> <BEA-149512> <JMX Connector Server started at service:jmx:iiop://192.168.1.2:8001/jndi/weblogic.management.mbeanservers.runtime .>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WebLogicServer> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055483> <BEA-000256> <Invoking oracle.jrf.wls.JRFStartup.main(null)>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WebLogicServer> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055514> <BEA-000256> <Invoking oracle.security.jps.wls.JpsWlsStartupClass.main(null)>
####<5 Απρ 2010 6:40:55 μμ EEST> <Info> <WebLogicServer> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482055530> <BEA-000256> <Invoking oracle.core.ojdl.weblogic.ODLConfiguration.main(null)>
####<5 Απρ 2010 6:40:56 μμ EEST> <Info> <WebLogicServer> <Hera> <soa_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1270482056684> <BEA-000256> <Invoking oracle.jrf.AppContextStartup.main(null)>
####<5 Απρ 2010 6:40:56 μμ EEST> <Info> <WebLogicServer> <Hera> <soa_server1> <[ACTIVE] E

Thank you for your reply!
The tutorial emphasizes that I need jdk 1.6 update 11 in order to setup.
The newer release of wl server comes with jsk 1.6 update 14.
When I tried to run:
setup -jreLoc C:\Oracle\Middleware\home_11gR1\jdk160_14
no setup screen appeared.
Next, I setup stand alone jdk 1.6 update 11 and add it to path,
but setup -jreLoc C:\Program Files\Java\jdk1.6.0_11 failed too, since no setup screen appeared
So I uninstalled version 10.3.2, installed 10.3.1 to follow exactly the tutorial specs.
Does one has to pay oracle consulting, in order to have an installation of soa suite up and running for development?
Edited by: Nick Aiva on Apr 6, 2010 11:27 AM

Restoring SOA suite on a new host fails.

Similar Messages

Maybe you are looking for