Restrict Access to Expense Report template for a Responsibility

Hello,
We want to restrict access of a Expense Report template to a specific responsiblity.
Is there a way to do it.
Basically we have around 3 Expense Report Template. But we want to restrict access to one of the template to a particular responsibility.
Any help in this regard is greatly appreciated.
Thanks

Hi ,
To my Knowledge the only option I think right now to restrict the template for an Responsibility is to do is there is check box Enabled/disabled where you define the templates ,Try to disable that check box and see , I think when you try to create an expense report from Internet Expenses after you do this , you cant see the template you have disabled it in the List of values for that Responsibility . I hope that works .
Thanks
Deepthi .
Edited by: 796018 on Sep 20, 2010 10:32 AM

Similar Messages

  • Expense Report Template -Accounts code not appearing when imported to AP

    Hi Gurus,
    I defined Expense Report Template for OU1, and for the courier expense i defined account code as 01-110-7410-00 ( Co-Dept-Courier Expns-IC)etc. with expense type as courier.
    But when i submitted Expense Report using the same template and when imported to AP,accounts codes are 01-101-7610-00(Co-Dept-Salary-IC). Its totally wrong iaccounting treatment. This wrong acount codes came from HR whch assigned in Asssignment for Purchase Order Information.
    Please provide your suggestions.
    Thanks in advance
    Regards
    Dinesh

    Hi
    We have the same requirement.
    Can I ask what your solution was?
    Did you have to do some customisation or was there a standard solution available?
    Many thanks in advance
    SK.

  • 2 Mileage Policy Schedules on the same Expense report Template

    Hi,
    I am trying to create another mileage rate schedule and put in the same expense report template. It works and when you input mileage information for trip X,Y,Z on the Expense Report, the choice is there (drop down list) and the correct rate is automatically included in calculations.
    The thing is that the project expenditure fields are grey and cannot input project/task etc.. I think I did the whole setup whether its on the Project Billing or Costing (expenditure category/type) and Payables Manager (ER template).
    Am i Missing something?
    Thank you,
    Edited by: 985580 on Mar 15, 2013 8:55 AM

    Roseline,
    Create a new button and select the option to create the button as an item and not in the region position.
    Item buttons behave differently to Region Position buttons.
    If you are wanting to use the button to "SUBMIT" the page, you will need to change the button to Target is a URL and add javascript:doSubmit('YOUR_REQUEST_VALUE');
    Gus..
    REWARDS: Please remember to mark HELPFUL or CORRECT posts on the forum, not just for my answers but for everyone!
    ;-)

  • #REGION_STATIC_ID# does not work in report template for PPR

    I was hoping to use the new substitution string #REGION_STATIC_ID# for a PPR report, because when we do Export/Import of the app the Region ID changes and we have to manually change the Pager Header Javascript to get the PPR to work. A real pain.
    So I changed the Region template to use #REGION_STATIC_ID# and set the Static id in the region definition - this worked fine. Next, I modified the Report template for PPR to use #REGION_STATIC_ID#, but at runtime this resolves to a blank! I assumed it would pick up the static ID for the region it was in. Is this a bug or am I just not understanding the way it is supposed to work?
    Regards,
    Steve

    Hello,
    #REGION_STATIC_ID# is available in some places in the report template. But the PPR javascript uses the APEX engine created ID get into the fast track report engine so it's not going to work that way.
    But you can still do what you want to do what you want to do. Use the #REGION_STATIC_ID# in your region say something like this #REGION_STATIC_ID#_body the use the javascript to get that element and then use that element
    along with getElementsByClass(searchClass,node,tag)
    http://apex.oracle.com/pls/otn/f?p=38704:2:::NO::P2_ID1:22
    to grab the report table and then it's ID which you can then feed into your javascript. It will only be 2-3 more lines of javascript.
    Carl

  • Financial Report Template for Trial Balance

    Dear All,
          I was prepared the financial report Template, for trail Balance as per Schedule VI (6) after completation of template i exucute the trail balance by the using of above template.
    For the execution of the above report i used the selection cretario i taken as "Annual Report" and i run the report - it has execuatated successfully.
    After that i changed my selection cretaria as a "Quartlly" and i run the Report,
    but in that report is showing some values , these values not showing in Annual Report.
        Please Guide to me.
    Message was edited by:
            Marc Riar

    Hi Atul,
    SBO uses two different templates for the Trial Balance Report based on the Period Selection. 
    <b>Annual Report
    Template: CBL1 - Trial Balance
    Quaterly, Monthly, etc.
    Template:  CBL4 - Periodic Trail Balance</b>
    So you have probably customised CBL1 (per Schedule VI (6)) which works for Annual.
    <i><b>You have to also customise CBL4 - Periodic Trail Balance the same way so that it can work for the others.</b></i>
    Regards
    Suda

  • Expense Report Template in Payables Migration

    is there a way to migrate expense report templates from one instance to another instance using fndload or any other methods. Please reply.
    Thanks,
    -Pbhav

    Oracle introduced modified functionality in R12.1.
    It is called Expense Report Archive and Purge (OIEARCHPURGE.)
    This is a conc. program that you can run and give date / org parameters.
    Hope this answers your question,
    Sandeep Gandhi

  • Crystal Report Templates for User-Defined Objects

    Hello Experts,
    I am running SAP B1 8.8 PL11. In the current patch SAP has default Crystal Reports that can be used as Layouts for Invoices, Credit Memo's so on. Is it possbile to have layouts for user defined objects ( say for instance i have a customized form under sales module, can i import a crystal template for this customized form?). In the report layout manager i don't see an option to import user-defind objects.
    Any help would be appreciated.
    Thanks,
    Praneeth

    If this is still a problem please re-post to the SAP Integration Kit forum.

  • Edit report template for Disposal Documents (CG42) - Waste Transporter

    Hi all,
    I am trying to create a new template (CG42) for disposal documents.
    I can not to introduce the information about the transporter (waste transporter name, auth-assgnd no. and the transport matriculation)
    can you help me? how can i do it?
    thank you very much. María.

    Hi Keshav,
    Yes, this problem is resolved except because i don´t know where i have to introduce the License Plate in the waste transporter (WAA19) in order to it appears in the WWI document.
    I have anothe question to it in the Forum "Report Template with WWI: Waste Transporter: License Plate".
    Can you help me?
    thank you very much again. Marí

  • I Need  Matrix Report Template for XML

    can any one give me matrix report tample for XML
    Edited by: Kamran Riaz on Mar 21, 2009 12:13 AM

    Numbers does not have anything specifically called an event registration template.  There are several options:
    1) search using your favorite search engine (google found quite a few hits when I searched using "Event Registration Template"
    2) build your own in Numbers
    Option (2) shouldn't be too difficult.
    It could look something like:

  • How to Set Report Template for CRDesigner control 11.5 (RDC control)?

    Hai,
    I am using the CR Designer control (CR XI R2 RDC) in VB6.0. I have crystal report templates available in Web Server.
    want to load these templates in CRDesigner control through VB6.0, Is it possible?
    Thanks
    Kesavan
    Edited by: kesavan1986 on Jul 22, 2010 8:12 PM

    It does not matter where the reports are. If you can open them up in the CR designer (crw32.exe) you can open them using any CR SDK.
    RDC samples are here:
    https://www.sdn.sap.com/irj/boc/businessobjects-samples
    RDC Developer Help File:
    C:Program FilesBusiness ObjectsCrystal Reports 11.5Helpen
    dcsdk_com_dg_docdoc
    dcsdk_com_dg.chm
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup

  • Can expense report invoices for Credit Card transactions ever get paid?

    We are implementing corporate Credit Cards into iExpenses and I have a question. How do the expense report invoices that are created in Payables from credit card transactions, where the invoice is $0.00 get paid? I have attempted to pay them manually but am unable to proceed. Is it possible to pay these expense report invoices or do these $0.00 value invoice remain unpaid in the system forever? Please help. Thanks

    Hi  Harry
    You can use the badi TRIP_POST_FI   .you can create custom table & mention the different symbolic account number  & change your  symbolic account based on your expense type by using the above badi. While you do FI posting  your expense types will get posted in two hit two different G/L account
    It will surely solve your problem.. I had same issue in my earlier project which i have done the above solution.
    Thanks
    Anwar Hossain

  • Role to Restrict access to BW report acc. to plant & Region

    Hello,
    Can I restrict users to view the BW report according to the plant they are authorized to.
    Say I've User1(plant 1100) & User2(plant 1200).
    Now I want both the users to access same report (say, Plant Wise Sale Report) but to view data related to their plant only.
    Can I achieve the scenario by creating Role.
    Also I want to put a check on Region( East, West, North, South).
    Plz provide Authorization Object & complete procedure for both plant & Region.
    Thanks in Advance
    Shilpi

    its long procedure. Screenshots will help u. 
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ded59342-0a01-0010-da92-f6b72d98f144
    http://help.sap.com/saphelp_nw2004s/helpdata/en/59/fd8b41b5b3b45fe10000000a1550b0/frameset.htm
    BI and Portals 2006 [original link is broken]
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ded59342-0a01-0010-da92-f6b72d98f144
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d01852a1-772c-2a10-ada1-88300f31c6cf
    /people/prakash.darji/blog/2006/10/09/sap-netweaver-2004s-bi-authorizations-for-reporting
    let me know if you are not clear.

  • How do I install / access / find Crystal Reports Repository for B1 8.81?

    What are we attempting to connect to when we try to login to the Repository from Crystal Reports for B1?  Is there server software we need to install?  Buy?  It's supposed to be a simple Access DB from all the CR 9.0 documentation we've read which seems to be the last documentation about this.  Something that useful should definitely come with CR.  Why can't we find any documentation on enabling or installing the Repository?

    Hi,
    it is a separate software, a part of the CR server.
    It's not free for SBO as CR is.
    More info [HERE|http://www.sap.com/solutions/sap-crystal-solutions/information-infrastructure/sapcrystalserver/index.epx]
    And as far as i know your not allowed to use CR for SBO to use the repository, you'll probably will also need a full CR licence.
    If you are a VAR, probably a VAR evaluation version is available somewhere.
    Das:
    sorry for asking, but your answer is ment to answer this topic? as it seems non relevant

  • Edit report template for Disposal Documents (CG42)

    Hi experts,
    I am trying to create a new template (CG42) for disposal documents, but i cannot do it.
    I can introduce the Header´s information, but not the information about the transporter, the waste disposer or the waste generator.
    can you help me? how can i do it?
    thank you very much. María.

    Hi Keshav,
    Thank you very much. You are right.
    Best regard. María.

  • Expense Reporting having incorrect value for org_id

    Hello team,
    Some of our expense reports are having issue while populating the org_id on ap_expense_report_headers_all table. Expense report was created in UK but having the org_id value for US. This is happening randomly and not to all the expense reports in the system.
    Please feel free to let us know if anyone of you came across the same issue. Parallely I have opened a SR with Oracle team.
    Application release Version 12.1.1
    Thanks
    Abhi

    Hi Abhishek,
    are you creating expense reports from a single responsibility all the time or you have different responbilities...?
    If so check the profile option values attached to the mo:operating unit ....since system would populate the ORG_ID column in the ap_expense_report_headers_all table based on the value assigned in the profile option.
    References:
    In Oracle Internet Expenses patchset H, why do we receive a warning saying the employee is inactive when auditing a report? [ID 312203.1]
    Regards,
    Ivruksha

Maybe you are looking for