Restrict Goods Recipient Field in MIGO "MSEG-WEMPF" to 10 Characteristics

Hi Experts,
The field length of "Goods Recipient field - MSEG-WEMPF" in GR (MIGO Transaction) is 12.
I need to restrict the user to enter only 10 characteristics for Goods Receipent field.
If User Enters more than 10 characterisics system should through an Error Message.
Is there any way to meet this requirement.
Any Input is Highly appreciable.
Thanks and Regards,
Selvakumar.M

Hi,
For this you have to take help of ABAPer.
Since field 'WEMPF" is SAP Standard and is of 12 character.
Go to SE11, here enter field "WEMPF" in Table and click on "Display"
It will show you domain as "WEMPF", double click on this, under Formatting Subscreen, you will get No. characters as 12
Here ABAPer can change it to 10 which will restrict users to 10 character only.
But to change this, you need Access Code.

Similar Messages

To add F4 help for goods recipient field in MIGO

Hello,
I've a requirement in migo, under the details data, we have a "where" tab.
Under this tab, there is a field "Goods Recipient" for input.
Now I've to add a F4 search help for this input field such that it picks up from my ZTABLE.
Can anyone please suggest how to add the search help for this field.
Can this be performed using a field exit or any userexit. MBCF0005 or badi MB_MIGO_BADI ?
Please guide me and thanks in advance.
~With Regards,
Him

Thanks Rupali,
I've already created my search help and search help goes well with any of my ztable or zprogram. But, the field where I want to add my search help is a standard migo program SAPLMIGO, and the field where I want to add search help is "good recipient" field under "where" tab of "migo" transaction.
And the name of the field is WEMPF, which belongs to the sap standard structure GOITEM.
So, SAP wont allow me to edit it's standard tables. Is there any other alternative?
~With Regards,
Him

Check on Shop for usrid and Goods recipient field in BADI

I would like to make a check thro' check docuement BADI in SRM 3.0, Give an error to user if shop for usrid is different from Goods recipient field in the shopping cart.
In which structure the shop for usrid information is stored and how should I read it. I can get the goods recipient information from structure-BBP_PDS_PARTNER.
Any help is greatly appreciated.
Thanks in advance!
Mrudula

Thanks Rupali,
I've already created my search help and search help goes well with any of my ztable or zprogram. But, the field where I want to add my search help is a standard migo program SAPLMIGO, and the field where I want to add search help is "good recipient" field under "where" tab of "migo" transaction.
And the name of the field is WEMPF, which belongs to the sap standard structure GOITEM.
So, SAP wont allow me to edit it's standard tables. Is there any other alternative?
~With Regards,
Him

Goods recipient field not available when creating a service purchase req

We are trying to create a release strategy for purchase requisitions with acount assignments K, F and P. The release strategy would use the requisitioner and goods recipient fields to determine the release group. The issue is when creating a purchase req with item category D for any account assignment, the recipient field cannot be populated. It is greyed out. I tried setting the field as mandatory in the IMG at the account assignment level but it doesn't prompt me for a recipient if item category D is entered. Is there a way to allow this field to be populated? I don't care if the value is transferred to the purchase order but I need it populated to determine the appropriate release strategy. We are not using workflow so that is not an option. Any suggestions would be appreciated.

Srinivas, I appreciate the response but the requisitioner field is not the problem. I can set that field to mandatory. The issue is I cannot populate the recipient field that's located on the account assignment tab of the purchase req. The recipient field can be populated if the item category field is blank but as soon as I populate the item category with D for service, the recipient field is unavailable. Is there a way to populate this field when the item category is D?

Goods recipient field at the header level when reservation is created.

Hi Experts,
In SRM, when shopping cart is created and a reservation is created in the backend ECC system, the Goods Recipient field is updated only at the item level but not at the header level. That is, when I go to the transaction mb23 and check the values for the particular reservation, the Recipient field is updated only for the item and not for the header.
On the other hand when I create a reservation manually, Goods recipient can be filled at header level as well. Is there any way in which the Goods recipient value will reflect at the header level as well when I am creating a shopping cart and a reservation is created in the backend?
Thanks in advance.
Regards,
Janhavi.

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Blanket PO/Service PO-- NO Goods recipient field value populating from SRM

Hi,
When i post either Service PO (item type D) or blanket PO (Item type B) .e Goods recipient field not being populated in ECC.
Where as if its the standard PO, then i am getting this Recipient field populated with requisitioner number.
are there any SAP notes for this issue?
Let meknow if you have any inputs on this..
thanks
Krish

Hi. Limit and service POs have always worked a bit different with fields and so on, for example you can not change the plant on a limit PO.
I would ask SAP, and if they tell you there is no solution then just use the BBP_CREATE_PO_BACK BADI on SRM 4 or BBP_CREATE_BE_PO_NEW on SRM 5 to get the result you want.
Regards,
Dave.

How to restrict movement type field in MIGO Tcode

Hello there,
I want to restrict the users for 103 movement type through MIGO tcode.
I have searched for the objects and assigned the value 103 in the movement type field, but it is not solving my problem.
Is there any other way?
Thanks in advance.
Regards,
Priya.

If all your users are need to be blocked from using 103 movement type then go to OMJJ@Movement type 103@Allowed transaction@here remove the assignment of 103 with MIGO
If you want to do it through authorization then try out with your BASIS person M_BEFU_ALL for all authorizations in Inventory Management
Regards,
Indranil

Assigning search help (F4 functionality ) for recipient field in IW32

Hi,
my requirement is to assign search help (F4 functionality) for recipient field in components tab of IW32. anybody help me to assign search help for it. same way i need to assign that in MIGO, MB21, MB1A goods recipient field.

hi,
refer to the following link:
http://www.saptechies.com/how-to-add-f4-help-to-a-field-on-screen-module-pool/
i hope it helps
regards

Is it possible to add PERNR field to MIGO or MB1A transaction screens?

Hi,
Ours is a service industry with @ 10000 employees and we have implemented SAP with MM & HR module. We issue uniforms to all the employees when they join (new Joinee) and again once in January every year as reissuance. We intend to keep size information in employee masters in HR along with station code, designation, department and cost centers.
At present we are using two fields goods recipient and unloading point to mention employee code and type of issue (new joinee or reissuance). This is because employee code (PERNR) field is not there in MIGO_GI screen or MB1A screen.
Is it possible to add PERNR field to any of these transaction screens?
If added then we can fetch the relevant information about issuance of information along with station code, designation, department in Z report.
If possible, then how it can be done?
Thanks in advance,
Satish

Hi ,
as i understand we can add new fields in a transaction through user exit /field exit. so please discuss with your ABAP consultant & try to find out all the exit available for MIGO/ MB1A. then you have to decide which one will suit you. here you have to consider some factors like whether you need to enter values in the field or the field needs to fatch any value from any other table & should populate here.
the ABAPer can then write the code & add your required logic here.
i am not very good in this subject. just tried to share what ever i knew.
regards,
anubhab

ERFMG Field in MIGO to be EMpty Initially.

Hello Guys,
I currently have a situation where I require the Quantity in UoM (ERFMG) field in MIGO need to be Empty/Zero when the user enters the PO number Initial for movement type 103 only. This should be active only for Goods Receipt->Purchase Order (103 movement type). The reason for this is because, one of the user has posted a GRN for a whole Open PO Quantity.
We actually tried a BADI to get this - MB_MIGO_BADI by making the field ERFMG=0. But the result was, the system is giving a Zero even after we enter a value/number in the field.
Pls give me a solution to this issue.
Regards
Venk@.

Hi Dev,
We have tried that by adding the Initial. But now the system is proposing the Open PO quantity.
Posted the code for reference. Pls check and let me know.
Regards,
Venk@

Hide Unwanted Excise Fields in MIGO & J1IEX

In our business process, the duties such as NCCD and SED are not required and consequently we don't want these fields to appear in MIGO and J1IEX so that users can't put any value by mistake.
Can any one provide some idea what the settings required for this?
Thanks in advance

Hi,
To hide some fields in MIGO, NEED to do configuration settings. Then you can hide the required fields. The pathway as follows...
SPRO->SAP REFERENCE IMG->NATERIAL MANAGEMENT->INVENTORY MANAGENET AND PHYSICAL INVENTORY->SETTINGS FOR GOODS MOVEMENT(MIGO)---> FIELD SELECTION FOR MIGO(CHACK THE RADIO BUTTON FOR HIDE AGAINST THE REQUIRED FIELD).
By following path way you can hide the required fields in MIGO.
For J1IEX also there are options to hide the fields. I hope this will clear your issue. Thanking you.

Hide/Suppress Cost center field in MIGO and MB1A for movement types 551&552

Hi All,
Can anybody tell me how to suppress or hide the cost center field in MIGO or MB1A for movement types 551 and 552?
I did below settings and it worked fine for only MB1A and for MIGO still it is showing cost center field.
IMG > Materials Management > Inventory Management and Physical Inventory >Goods Issue/Transfer posting > Define screen layout > select movement type to change the option.
Also I did gothrough the settings for Enjoy transaction (MIGO) there we have only option to make fields either "Required entry" or "Optional entry" and we don't have an option to hide/suppress.
Please advise or help me .
Thanks in advance!
Regards,
Praveen

Hi
The cost center field is a required field in mvt type 551 as you are scrapping materials, some cost center will need to take the cost of this operation.
Anyway, you first need to make the field as optional for example, before you move.
One option is that you create a screen variant in Tcode SHD0 for MB1A, where 551 is setup as constant (with content) , and mark Cost center as invisible and assign this screen variant to a transaction in SE93.
regards
Sidi

Goods Recipient and Unloading Point on an Blanket purchase orders

Hi,
I am trying to maintain value in the fields Goods recipient and Unloaing point in an account assigned purchase order or purchase requisitin. However when I select item category B (Limit) these fields are greyed out.
I know that these fields are driven from the account assignment category fields slection. I checked in configuration. In configuration it was found that these two fields are configured as optional. Still I am unable to identiy which config derives this fields selection.
If any one of you faced this weird situatioin or do I missing any thihg here..?Please let me know
Thanks
Uamakanth

Hi Uamakanth,
Did you get to a resolution on this one? I am having the same problem.
Let me know...
JC

Adding the E-Mail Adress to partner Goods Recipient in Sales order

Hello.
We are creating sales orders either with EDI (IDOC ORDERS) or function module BAPI_SALESORDER_CREATEFROMDAT2.
In both cases the tables for partners doesn't include a field for the E-Mail adress.
So we send the E-Mail Adress as Name4.
When creating the sales order we want to send the Goods Recipient a message by Mail using the SAP-Standard routines. Therefore we need the Mail Adress in the corresponding field in the header-partner.
Does anyone have an idea how the move the Mail Adress from Name to Mail adress?
During creation of the sales order the adressnumber is not defined.
Best Regards
Gerhard

Hi Srinu,
Thank u for ur help!
"Please note in xd02 you can assign many different patterns with same partner type but in VA02 you can only assign one parter type for one line item un like in XD02."
This was a very nice tip.
I am sorry to bother u more, and since we are on this topic, can I ask u one more question?
I have now made the SP Modifiable just to check if we can change it, and what impact does it have on the DOC header. But I still cannot modify it!.
Note: I saved the configuration, used /nva01 just to be sure the VA01 was not open already(which would have not picked the new configuration). So I let the system save and try new setting.
See config:
Then VA01

How to find out Goods recipient in the FM or Table in SC or PO.

Hi Guys,
I have to findout Goods recipient in the SC or PO get data FM. I could see in the web transaction in SC basic data tab but couldn't see in the SC get detail FM or PO get detail FM. Where do I find out this ?..What is table name to link PO and Goods Recipeint name correspong to PO item data. I need to know item level goods recipient.
Pls help me out ...
Regards,
Kumar S

Hi
<u>Using Function module - BBP_PD_SC_GETDETAIL, you can find the relevant data (Goods Recipient)
Using Function module - BBP_PD_PO_GETDETAIL, you can find the relevant data (Goods Recipient)</u>
Also using <b>BBP_PD transaction</b> you will find the complete details... Here you will find the complete table names and fields (And incase you debug, you find the relevant SAP logic)..
Hope this answer all your queries. Do let me know.
Regards
- Atul

Restrict Goods Recipient Field in MIGO "MSEG-WEMPF" to 10 Characteristics

Similar Messages

Maybe you are looking for