To add F4 help for goods recipient field in MIGO

Hello,
I've a requirement in migo, under the details data, we have a "where" tab.
Under this tab, there is a field "Goods Recipient" for input.
Now I've to add a F4 search help for this input field such that it picks up from my ZTABLE.
Can anyone please suggest how to add the search help for this field.
Can this be performed using a field exit or any userexit. MBCF0005 or badi MB_MIGO_BADI ?
Please guide me and thanks in advance.
~With Regards,
Him

Thanks Rupali,
I've already created my search help and search help goes well with any of my ztable or zprogram. But, the field where I want to add my search help is a standard migo program SAPLMIGO, and the field where I want to add search help is "good recipient" field under "where" tab of "migo" transaction.
And the name of the field is WEMPF, which belongs to the sap standard structure GOITEM.
So, SAP wont allow me to edit it's standard tables. Is there any other alternative?
~With Regards,
Him

Similar Messages

IW31- How to add Search help for User specific fields in IW31 transaction.

Hi Experts,
I have to add Search help for standard fields USR00 to USR10 fields in IW31 transaction.
Is there any user exit for this requirement.
Please reply, it will be very helpful for me.
Regards,
B. V. Rao

Bala,
See the following user-exits:
IWO10015: F4 Help for user fields on operation
IWO10016: Customer enhancement to check operation user fields
PeteA
[www.pjas.com]

Restrict Goods Recipient Field in MIGO "MSEG-WEMPF" to 10 Characteristics

Hi Experts,
The field length of "Goods Recipient field - MSEG-WEMPF" in GR (MIGO Transaction) is 12.
I need to restrict the user to enter only 10 characteristics for Goods Receipent field.
If User Enters more than 10 characterisics system should through an Error Message.
Is there any way to meet this requirement.
Any Input is Highly appreciable.
Thanks and Regards,
Selvakumar.M

Hi,
For this you have to take help of ABAPer.
Since field 'WEMPF" is SAP Standard and is of 12 character.
Go to SE11, here enter field "WEMPF" in Table and click on "Display"
It will show you domain as "WEMPF", double click on this, under Formatting Subscreen, you will get No. characters as 12
Here ABAPer can change it to 10 which will restrict users to 10 character only.
But to change this, you need Access Code.

How to add F4 help for the custom field of a custom table

Hi All,
How to add F4 help to the custom table field? in the table maintainance when user clicks on F4 i want to provide possible values for this field I am trying to write the code in the screen of table maintainace like the following
PROCESS ON VALUE-REQUEST.
FIELD ZTEST_MAH_F4-KUNNR MODULE zVALUE_kunnr .
But when i am double clicking on module it's giving options to create include program but after that it's giving user is currently editing the table i am not getting this can some body clarify my doubt it's gr8 if some body give some examp code
Thanks&Regards
mahesh

Hi,
Create a subroutine under the event and call the following FM
1. Select all the related data into an itab, for ex i_kunnr
2.    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
    DDIC_STRUCTURE         = ' '
       retfield               = 'KUNNR'
    PVALKEY                = ' '
       dynpprog               = sy-repid
       dynpnr                 = '1000'
       dynprofield            = <selection screen field>
    STEPL                  = 0
    WINDOW_TITLE           =
    VALUE                  = ' '
       value_org              = 'S'
    MULTIPLE_CHOICE        = ' '
    DISPLAY                = ' '
    CALLBACK_PROGRAM       = ' '
    CALLBACK_FORM          = ' '
    MARK_TAB               =
IMPORTING
    USER_RESET             =
      TABLES
       value_tab              = <b>i_kunnr</b>
    FIELD_TAB              =
       return_tab             = < return table >
    DYNPFLD_MAPPING        =
     EXCEPTIONS
       parameter_error        = 1
       no_values_found        = 2
       OTHERS                 = 3

Check on Shop for usrid and Goods recipient field in BADI

I would like to make a check thro' check docuement BADI in SRM 3.0, Give an error to user if shop for usrid is different from Goods recipient field in the shopping cart.
In which structure the shop for usrid information is stored and how should I read it. I can get the goods recipient information from structure-BBP_PDS_PARTNER.
Any help is greatly appreciated.
Thanks in advance!
Mrudula

Thanks Rupali,
I've already created my search help and search help goes well with any of my ztable or zprogram. But, the field where I want to add my search help is a standard migo program SAPLMIGO, and the field where I want to add search help is "good recipient" field under "where" tab of "migo" transaction.
And the name of the field is WEMPF, which belongs to the sap standard structure GOITEM.
So, SAP wont allow me to edit it's standard tables. Is there any other alternative?
~With Regards,
Him

How to add user defined F4 help for s LDB field?

Hi,
I am using PNPCE Logical Database for a program using the standard HR report category. But I want to have my own restricted F4 help for a particular field.Is it possible to override the standard LDB search help? I tried doing it , but I am getting a syntax error .
Mahesh

Hi Mahesh,
I don't think so that you can attach a User defined F4 help in a standard LDB.
What I would suggest is that you copy the standard LDB into Z LDB from SE80.
Then go to the selection screen of the LDB and either try and attach a F4 help by writing the code in it OR
Hide the field where you want to attach the F4 help with the keyword Exclude(you will have to check on the exact keyword).
And add the same field in the selection screen of the report and define the F4 help.
Do not forget to attach the Z LDB to your report by going to the Attributes.
Please refer to the code below for attaching a generic F4 help to a select options:
report zrich_0001 .
data: begin of ihelp occurs 0,
field type char10,
ftext type char50,
end of ihelp.
data: a_field(20) type c.
select-options s_field for a_field.
initialization.
ihelp-field = 'A'.
ihelp-ftext = 'Description A'.
append ihelp.
ihelp-field = 'B'.
ihelp-ftext = 'Description B'.
append ihelp.
ihelp-field = 'C'.
ihelp-ftext = 'Description C'.
append ihelp.
at selection-screen on value-request for s_field-low.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield = 'FIELD'
dynprofield = 'S_FIELD'
dynpprog = sy-cprog
dynpnr = sy-dynnr
value_org = 'S'
tables
value_tab = ihelp.
start-of-selection.
In case you have any further clarifications,do let me know.
Regards,
Puneet Jhari.

CLM How to add search-help for extension field(New Company Field) in MA.

Hi all,
Based on demand,I need to extend a new field(Company) in Master Agreement.
But I do not know how to add search-help for this field,just like User Accont page.
Anyone can help me ?thank you very muck.
Regards,
JackyCheng

Hello Jacky,
To combine all the answers above and have a topic-based reply please go through the below steps:
#1. Inactivate the current extension field Company (I see it is actually a String value and this is not what you want to have)
#2. Go to Setup -> System Setup -> Extension Reference Types
Check if you already have a Company reference type
If not, create a new Extension Reference Type for Class Company. Fill in all required information.
#3. Create a new Extension Attribute
Select Data Type: Object Reference
Now you can add the Company type as reference
Regards,
Bogdan Toma

How to add F1 help for a field on ALV grid

Hi All,
When we execute a program, the output is displayed using ALV grid.
on the ALV grid, if we press F1 on a field, it should popup the help document.
How to add F1 help for a field on ALV grid.
Thank you all in advance.

fill field LVC_S_FCAT-ROLLNAME of your fieldcatalog in method SET_TABLE_FOR_FIRST_DISPLAY
A.

How to add search help for standard field LIKP-TRAID

Hi friends,
How to add search help for standard field LIKP-TRAID ,
refer screen
Program Name SAPMV50A
Screen Number 2108
TrnsIDCode ( LIKP-TRAID ) ..
I need to add a search help, so that i can retrieve data from Ztable.
Thanks.
Abhi

Hi Abhi,
Try using any one option:
Create a Search Help in SE11.
Now Goto SE11 -> Enter Ztable -> Select that field -> Click Search Help and try to assign the created Search help to that field in your Ztable explicitly
OR
Create a Zdata element in SE11.
In Data Element, under Further Characteristics tab, enter Name Parameters of Search Help.
Assign this data element to that field in ur Ztable.
OR
Create a Zdomain and maintain a Value Table or Fixed Values for it.
Assign this domain to that field in ur Ztable.

How to add F1 help for a field

hello.
could you plese send me a small program , add F1 help for a field ,
it's very urgent !
best regards
srinivas

data: it_ret like ddshretval occurs 0 with header line,
         IT_MSEG_TEMP LIKE IT_MSEG OCCURS 0 WITH HEADER LINE.
At selection-screen on value-request for s_mat-low.
Select MBLNR from mkpf into table it_mblnr.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
DDIC_STRUCTURE         = ' '
      RETFIELD               = 'MBLNR'
PVALKEY                = ' '
DYNPPROG               = ' '
DYNPNR                 = ' '
DYNPROFIELD            = ' '
STEPL                  = 0
WINDOW_TITLE           =
VALUE                  = ' '
     VALUE_ORG              = 'S'
MULTIPLE_CHOICE        = ' '
DISPLAY                = ' '
CALLBACK_PROGRAM       = ' '
CALLBACK_FORM          = ' '
MARK_TAB               =
IMPORTING
USER_RESET             =
    TABLES
      VALUE_TAB              = IT_MBLNR
FIELD_TAB              =
     RETURN_TAB             = IT_RET
DYNPFLD_MAPPING        =
EXCEPTIONS
PARAMETER_ERROR        = 1
NO_VALUES_FOUND        = 2
OTHERS                 = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF SY-SUBRC = 0.
    read table it_ret index 1.
    move it_ret-fieldval to S_mat-low.
ENDIF.
At selection-screen on value-request for s_mat-high.
Select MBLNR from mkpf into table it_mblnr.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
DDIC_STRUCTURE         = ' '
      RETFIELD               = 'MBLNR'
PVALKEY                = ' '
DYNPPROG               = ' '
DYNPNR                 = ' '
DYNPROFIELD            = ' '
STEPL                  = 0
WINDOW_TITLE           =
VALUE                  = ' '
     VALUE_ORG              = 'S'
MULTIPLE_CHOICE        = ' '
DISPLAY                = ' '
CALLBACK_PROGRAM       = ' '
CALLBACK_FORM          = ' '
MARK_TAB               =
IMPORTING
USER_RESET             =
    TABLES
      VALUE_TAB              = IT_MBLNR
FIELD_TAB              =
     RETURN_TAB             = IT_RET
DYNPFLD_MAPPING        =
EXCEPTIONS
PARAMETER_ERROR        = 1
NO_VALUES_FOUND        = 2
OTHERS                 = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF SY-SUBRC = 0.
    read table it_ret index 1.
    move it_ret-fieldval to S_mat-high.
ENDIF.

Add custom field in the F4 help for selecting source field in tcode FMDER

HI,
I an working in FUND MANAGEMENT, i want to add custom field in the F4 help for selecting source field in t-code FMDERIVE.
How this possible.
Regards,
Pankaj

OK

Goods recipient field not available when creating a service purchase req

We are trying to create a release strategy for purchase requisitions with acount assignments K, F and P. The release strategy would use the requisitioner and goods recipient fields to determine the release group. The issue is when creating a purchase req with item category D for any account assignment, the recipient field cannot be populated. It is greyed out. I tried setting the field as mandatory in the IMG at the account assignment level but it doesn't prompt me for a recipient if item category D is entered. Is there a way to allow this field to be populated? I don't care if the value is transferred to the purchase order but I need it populated to determine the appropriate release strategy. We are not using workflow so that is not an option. Any suggestions would be appreciated.

Srinivas, I appreciate the response but the requisitioner field is not the problem. I can set that field to mandatory. The issue is I cannot populate the recipient field that's located on the account assignment tab of the purchase req. The recipient field can be populated if the item category field is blank but as soon as I populate the item category with D for service, the recipient field is unavailable. Is there a way to populate this field when the item category is D?

Goods recipient field at the header level when reservation is created.

Hi Experts,
In SRM, when shopping cart is created and a reservation is created in the backend ECC system, the Goods Recipient field is updated only at the item level but not at the header level. That is, when I go to the transaction mb23 and check the values for the particular reservation, the Recipient field is updated only for the item and not for the header.
On the other hand when I create a reservation manually, Goods recipient can be filled at header level as well. Is there any way in which the Goods recipient value will reflect at the header level as well when I am creating a shopping cart and a reservation is created in the backend?
Thanks in advance.
Regards,
Janhavi.

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

F4 help for ALV table field

Hi Experts,
I need to implement F4 help for ALV table field.
I my scenario, I am using two views. If we click on any record in fist view then it displays the popup window (second view) with relevant record details.
Here one of the columns having fieldnames corresponding values (old values), for correcting old values I have created new value editable column, we can enter new value for old value then we can save it. Till this functionality is ok.
Then I have included OVS help for new value field. Here I need to get f4 help for newvalue field relevant to fieldname.
For example: user clicks on f4 in cell (new value) then if corresponding fieldname is u2018WERKSu2019 then it shows the plant values
Here I can get fieldname, domain name and value table using method set_attribute ().
Same concept I have implemented in ALV using F4IF_FIELD_VALUE_REQUEST. It is working fine
Here I have little bit confusion. Please advise me how to implement in OVS.
Regards,
BBC

Hi,
you'll have to create a method for the OVS search help (define it in the "OVS component usage" field in the context).
Sample code (should work for WERKS):
method on_ovs .
declare data structures for the fields to be displayed and
for the table columns of the selection list, if necessary
types:
    begin of lty_stru_input,
add fields for the display of your search input here
      WERKS TYPE WERKS,
    end of lty_stru_input.
types:
    begin of lty_stru_list,
add fields for the selection list here
      WERKS TYPE WERKS_D,
      NAME1 type NAME1,
    end of lty_stru_list.
data: ls_search_input type lty_stru_input,
        lt_select_list   type standard table of lty_stru_list,
        ls_text          type wdr_name_value,
        lt_label_texts   type wdr_name_value_list,
        lt_column_texts type wdr_name_value_list,
        lv_window_title type string,
        lv_group_header type string,
        lv_table_header type string,
        lv_werks type werks_d.
field-symbols: <ls_query_params> type lty_stru_input,
                 <ls_selection>    type lty_stru_list.
case ovs_callback_object->phase_indicator.
    when if_wd_ovs=>co_phase_0. "configuration phase, may be omitted
in this phase you have the possibility to define the texts,
if you do not want to use the defaults (DDIC-texts)
Set label from Medium Description to something more logical...
      ls_text-name = `NAME1`. "must match a field in list structure
      ls_text-value = `Plant description`.
      insert ls_text into table lt_label_texts.
Set col header from Medium Description to something more logical...
      ls_text-name = `NAME1`. "must match a field in list structure
      ls_text-value = `Plant description`.
      insert ls_text into table lt_column_texts.
     lv_window_title = wd_assist->get_text( `003` ).
     lv_group_header = wd_assist->get_text( `004` ).
     lv_table_header = wd_assist->get_text( `005` ).
      ovs_callback_object->set_configuration(
                label_texts = lt_label_texts
                column_texts = lt_column_texts
                group_header = lv_group_header
                window_title = lv_window_title
                table_header = lv_table_header
                col_count    = 2
                row_count    = 20 ).
    when if_wd_ovs=>co_phase_1. "set search structure and defaults
In this phase you can set the structure and default values
of the search structure. If this phase is omitted, the search
fields will not be displayed, but the selection table is
displayed directly.
Read values of the original context (not necessary, but you
may set these as the defaults). A reference to the context
element is available in the callback object.
     ovs_callback_object->context_element->get_static_attributes(
         importing static_attributes = ls_search_input ).
    pass the values to the OVS component
     ovs_callback_object->set_input_structure(
         input = ls_search_input ).
    when if_wd_ovs=>co_phase_2.
If phase 1 is implemented, use the field input for the
selection of the table.
If phase 1 is omitted, use values from your own context.
      if ovs_callback_object->query_parameters is not bound.
      endif.
      assign ovs_callback_object->query_parameters->*
                              to <ls_query_params>.
      if not <ls_query_params> is assigned.
TODO exception handling
      endif.
        call method ovs_callback_object->context_element->get_attribute
          exporting
            name = 'WERKS'
          importing
            value = lv_werks.
        data: lv_subcat_text type rstxtmd.
        select werks
               name1
          into table lt_select_list
          from T001W.
        ovs_callback_object->set_output_table( output = lt_select_list ).
    when if_wd_ovs=>co_phase_3.
apply result
      if ovs_callback_object->selection is not bound.
      endif.
      assign ovs_callback_object->selection->* to <ls_selection>.
      if <ls_selection> is assigned.
        ovs_callback_object->context_element->set_attribute(
                               name = `WERKS`
                               value = <ls_selection>-werks ).
      endif.
endcase.
endmethod.

Blanket PO/Service PO-- NO Goods recipient field value populating from SRM

Hi,
When i post either Service PO (item type D) or blanket PO (Item type B) .e Goods recipient field not being populated in ECC.
Where as if its the standard PO, then i am getting this Recipient field populated with requisitioner number.
are there any SAP notes for this issue?
Let meknow if you have any inputs on this..
thanks
Krish

Hi. Limit and service POs have always worked a bit different with fields and so on, for example you can not change the plant on a limit PO.
I would ask SAP, and if they tell you there is no solution then just use the BBP_CREATE_PO_BACK BADI on SRM 4 or BBP_CREATE_BE_PO_NEW on SRM 5 to get the result you want.
Regards,
Dave.

To add F4 help for goods recipient field in MIGO

Similar Messages

Maybe you are looking for