Restrict Subject Areas

Hi,
I am trying to restrict access to certain subject areas in answers. I would like specific groups/users to have access to certain subject areas.
Is this performed in rpd or in answers?
Thanks

Hi ssk,
Here are the steps to do define the security in RPD level security/groups/permissions and can give access as per your need.More you can ifnd out in this below link on 6th point screens are also provided http://www.biblogs.com/2010/01/18/obiee-10g-web-catalog-%E2%80%9Cbest-practices%E2%80%9D/
hope helps you.
Cheers,
KK

Similar Messages

Can we hide a specific subject area in answers for selected users

Hi,
Can we hide a specific subject area in answers for few users. I want to expose a particular subject area for only 2 users out of 10 . Right now if i expose it all 10 ppl with answers access will see that subject area. can i hide it for the other 8 without removing their answers access.

Log in as Admin- Setting-Administration-Manage Privileges-Search for your subject area and place appropriate restriction..

Choose the Subject Area according to the user connexion

Hi all,
Suppose that I have many subject area in the presentation layer (for example SA1 and SA2).
Is it possible to choose the subject area to display according to the user connexion.
ie. If we have two users User1 and User2 and i would like to schow only SA1 for USER1 and USER2.
Thanks
Best regards

You can do this by following steps....
1. Open the repository in Administration Tools. In the presentation layer, Go to the presentation catalog. then right click the presentation catalog you want to restrict to a particular user.
2. click properties. Go to persmissions tab, then click show all users and groups. select the user you want to restrict and then click the checkbox next to it. keep clicking it until it becomes a red cross. click ok. It's done.
Hope that helps...Correct me if I am wrong.
Edited by: user9149257 on Feb 24, 2010 3:19 AM
Edited by: user9149257 on Feb 24, 2010 3:20 AM

Restict to subject area

Hi OBIEE Experts,
I come to back new requirement in obiee 10g, Kindly share me your valuable inputs.
I have three subject areas likes , A,B,C.
A and B both are Adhoc reports But C Static reports.
All users try to open static subject area , we need to restrict C subject area open access means any one try to click this subject area , we need to display message like ( This is not adhoc report this is static report subject area ) it is possible in obiee 10g.
Note: If am going to hide this subject area static report all not working, We need to display this subject area but if any one try to open this subject it will throw error like above mention.
Hope you understand my requirement.
Thanks.

Hi,
In the presentation layer in RPD you can set Permissions.
Double click on the Presentation subject area folder and then in General you can find permissions.
OR
Give your message in descriptions and when the cursor is moved across then message appears but it will be displayed.
Hope this helped/ answered.
Regards
MuRam

Hiding Subject areas

Hi everyone,
Can anyone tell me how we can hide the subject areas?
Thanks in advance..

Hi,
You can give access to the subject area based on user login by giving permission to that group he belongs to (or) user level permission.
Open rpd in online mode and right click on subject area to be restricted and go to properties where you can give permissions to groups (or) users based on your requirement.
Thanks,
Srikanth

Google Map Issue in OBIEE - Subject area not getting associated

Hi Gurus,
We are trying to integrate Google map and OBIEE via mapviewer. We have done the following already -
1. Loaded World Sample data from Navteq.
2. Configured mapviewer source and added Google map as a tile layer with the API KEY.
3. Imported one layer (e.g. M_STATES_ABRV) in OBIEE and linked it with BI subject area (tried this step with importing other layers as well)
4. Added background map.
Now , in this step when we add the layer in the map, we select M_STATES_ABRV and change zoom levels. But Once we come back to main screen after Clicking OK, we see the background map is not associated with the subject area. Hence any map view report creation with this subject area fails.
We have the tried the same theme with Oracle Maps (internal type like WORLD MAP or DEMO MAP), it works fine. only Google Map gives this issue.
This was not expected. Please suggest what we missed. We tried with cache clear, tile delete and recreation, service restart almost everything .
We looked into other threads in this community, different oracle support documents - Doc ID 1485088.1,Doc ID 1346805.1 etc and in different internet blogs - where it's easy as child's play, but we are still out of luck.
OBIEE version - 11.1.1.7.140527
Environment- windows server 2008 R2
Please suggest.
Regards,
Krish

I have found the solution: You need to *select* zoom levels for the BI Layer. When a BI Layer is added to a background map, by default no zoom layers are selected. Once a zoom level is selected, the BI Layer will save.

Need Help to develop a Funnel Graph Report using Multiple Subject Areas.

Hi Everybody,
Did any body developed Funnel based graph report in Answers..
Scenario: I need to develop a report which is based on 4 Facts(4 Subject Areas) Report is sectioned with 4 block one blovk with one Fact Metrics like this four blocks.
If any idea on such scenario it will be huge benefit for me.
Thanks in advance.
Thanks,
Govardhana

Yes, i can see datatype and number of columns is same in both queries.
i have challanges to copy message but Error message seems to general. Error says (near to FROM) and I checked there are three FROM in query and all seems to be ok
Query is something like as below
select SA1.col1 saw_0,
SA1.col2 saw_1,
SA2.col1 saw_2,
SA2.col2 saw_3,
FROM
(select col1 saw_0, col2 saw_1 from "subject area1") SA1
FULL OUTER JOIN
(select col1 saw_0, col2 saw_1 from "subject area2") SA2
ON SA1.col1 = SA2.col1
I can't see any issue in the query...please comment.

Report using colmns from 2 subject areas

Hi,
I have to buld a report as below
Product      ForecastRevenue(A)       ActualRevenue(B)       Variance
A                200                                      100                           100
B                200                                      200                            0
ForecastRevenue(A) comes from 1 subject area and ActualRevenue(B) comes from another subject area. Using these 2 columns from different subject area I have to create
a calculated column variance which is the difference of two columns. How can I create this report. Any idea?

can be done in two ways;
1. Using Union report
Create a union report with two request.
Request1 -          product               Forecast_Revenue     Actual Revenue
Col expression     "product.name"     "Fact.Revenue"         0
Request2 -          product               Forecast_Revenue     Actual Revenue
Col expression      "product.name"    0                             "Fact.ACTUAL_Revenue"
In the result tab create a pivote report and set the aggregation of fact column as sum.
Add a calculated column and write the expression as
Farecast_Revenue - Actual_Revenue
You are done.
2. Use the advance tab in the report and write a custom SQL to join these two subject area.
eg.
select product, A.forecast_reveneu, B.Forecast_Reveneue, A.forecast_reveneu-B.Forecast_Reveneue
from SA1 A join SA2 B on (A.product=B.PRODUCT)
You are done.
Best of Luck,
Kashi

How to find total report based on a particular subject area in OBIEE?

Hi Everyone,
I am new to OBIEE. I want to find out all the reports based on a particular subject area as there are many subject areas and lot of reports in OBIEE.
Please help me out in this issue.
Thanks
Regards
Sohail Dayer

Sohail,
Check out the catalogue manager reports :
http://oraclebizint.wordpress.com/2007/11/19/oracle-bi-ee-catalog-reports/
If you want this kind of thing automated, I personally am very fond of the ODI -> OBIEE Data lineage solution as provided in Oracle By Example tutorials :
http://www.oracle.com/technology/obe/fusion_middleware/odi/OBI-ODI_Lineage/OBI-ODI_Lineage.htm

In Mail, Reply To and Subject area doesn't appear

In Mail, Reply To and Subject area doesn't appear on an opened email.

Hi
Go to Mail / Preferences
on the Viewing tab - Show header detail - drop down box
Select whatever suits you. - try default
/Dennis

Report from multiple subject areas

Hi,
I need to create a report from multiple subject areas. I am not sure whether it;s possible in OBIEE answers.
Is there any other tool from OBIEE suite where I can design it?
Thanks

Yes, i can see datatype and number of columns is same in both queries.
i have challanges to copy message but Error message seems to general. Error says (near to FROM) and I checked there are three FROM in query and all seems to be ok
Query is something like as below
select SA1.col1 saw_0,
SA1.col2 saw_1,
SA2.col1 saw_2,
SA2.col2 saw_3,
FROM
(select col1 saw_0, col2 saw_1 from "subject area1") SA1
FULL OUTER JOIN
(select col1 saw_0, col2 saw_1 from "subject area2") SA2
ON SA1.col1 = SA2.col1
I can't see any issue in the query...please comment.

OBIEE 11g: Searching Subject Area for measure names in Answers

Hello,
I have installed OBIEE 11g SampleApp 825 and just exploring the provided set of dashboards.
From the samples, I am performing following steps:
- I selected Edit Dashboard (for 2.1 Simple Demo Dashboard)
- For Column 2, in the Master Detail 1 Compound View, I did Edit Analysis
- which took me into the Answers design interface with 4 tabs (Criteria, Results, Prompts, Adv).
In the Criteria tab, there is the Subject Area pane on the left where it shows the Subject Area this Answers report is built on and a bunch of Folders like Time, Products, Base Facts etc.
Beside the Subject Area pane, is the Selected Columns pane where you drop fields from the folders.
This particular analysis (Product Line Analysis) has three columns: Revenue Analysis, Products Hierarchy and T05 Per Name Year.
Now, I want to find the folder to which the Revenue Analysis measure belongs. So, I started expanding each node/folder in the Subject Area pane and visually searching for "Revenue Analysis"....cannot find it!
How to determine which Subject Area folder a field on the Analysis belongs to? In Oracle Discoverer, only the Folders from which fields are selected are "enabled" so it's easy to navigate straight to that folder. Or again, in Discoverer, you can actually search for a particular field name and it will return all folders that have that field name pattern. While the Search feature on the top row is useful in finding which Analysis/Report match a string, it does not help in identifying relevant Subject Area Folder fields that match a pattern.
Is something similar available in Answers/OBIEE 11g?
Thanks,
Manish
Edited by: mhathi on Oct 21, 2010 8:53 AM

Again answering part of my own question...It was staring me right in the eye and I couldn't see it:-)...When you have a column in the Selected Columns pane, it's source is right there above the field name. If there is no source folder listed, then it might mean it's a formula. For example in my case, the Products Hierarchy column has the word Product above it...that's the folder it belongs to.
Good. But, the follow-on question still remains, how to search for folders containing a particular string, to find say all folders that have columns like %Margin%?
Edited by: mhathi on Oct 21, 2010 9:27 AM

Passing a value from Report A to B when B is in a different Subject Area

I had posted a question previously on how to pass the Dept # from Report A to B when B i in a different Subject Area. The question was:
Report A is a table on the Dashboard that shows Actual vs Budget results by Department. I want the user to click on the Department and be navigated to report B that shows the detail transactions that make up the Actual results. Report A and B are from different underlying subject areas. Thus when I navigate to report B, I see ALL departments, and not the one I clicked on in Report A to bring up Report B. How can I limit the results in Report B to be just the respective cell I clicked on in Report A?
I got great advice from Nico on how to use the GO URL, but I can only get that to work if the 2 reports in question are from the same data model. In my case they are NOT.
The GO URL seems to be working, as it does open up Report B when I click on the Department field in Report A, but it does not pass the Department number to Report B, even though reprot B has that field "as prompted".
Can anyone definitively indicate whether what I'm trying to do is not possible in BI EE?

Read this from Venkat... I think this will be helpful in understanding prompts, both the column prompts (Answers) type and the dashboard prompts. Very useful, I think.
http://oraclebizint.wordpress.com/2008/04/30/oracle-bi-ee-101332-understanding-dashboard-prompts-passing-prompts-to-multiple-subject-areas-aliases/

Multiple Facts in single subject area

Hi everyone,
Is there an optimal way to get multiple facts into a single subject area? The only way I've managed to get multiple facts into a single subject area is to go the route of creating hierarchies for all dimensions, setting up all the content levels for both the fact and dimension tables and finally creating aggregated measures for all the fact tables. However, when you setup these different hierarchies and content levels, the queries which are generated tend to get fairly nasty and seem to be slow. Another pesky issue is that I've had to create pseudo columns for all facts, so that if a report is using one dimension from FACT A and one dimension from FACT B, then you have to include this pseudo column from both facts so that OBIEE knows which tables are involved in the query. Without including these pseudo columns in the report, the OBIEE engine gets a little confused and puts up an error.
I'd prefer to find a better way to do the multiple fact implementation without having to have the massive queries and pseudo columns, but I'm not sure what the other options out there are. Anyone know the best way to accomplish this?
-Joe

Hi Wildmight,
You are exactly right.
Here's an example of what I'm trying to accomplish. We have a TIME SHEET fact table which has things like a work date, an employee ID, a work order number and the hours which were worked. The work orders can be against one or more pieces of equipment. There is a second fact table which models the one to many relationship between work orders and equipment.
The model would look a little like this:
Join on WORK ORDER NUMBER Join on WORK ORDER NUMBER
TIME SHEET FACT <-----------------------------------------------WORK ORDER Dimension ----------------------------------------------> WORK ORDER EQUIPMENT FACT
We would like to create a report that shows the number of hours from the time sheets fact grouped by the piece of equipment from the work order equipment fact. I've been able to setup this report using the method I described in my first post, but like I said, the generated SQL is massive and seems somewhat unnecessary.
I think I'd have to say the grains of the facts are different since they providing to different pieces of information.
I haven't done too much multiple LTS experimentation. I'm working from a single data warehouse source which should be robust enough to handle any reporting requirements. Even though I know OBIEE can do some clever combining of tables using the LTS; if data sets need to be consolidated, I'm trying to keep that work in the database via ETLs in order to keep the work that OBIEE has to do down to a minimum.
-Joe

I Need to Create a report for batch jobs Based on Subject Area.

Hi SAP Guru's,
I need to create a report , that it must show the status of batch jobs Completion Times based on Subject area(SD,MM,FI).
Please help me in this issue ASAP.
Thanks in Advance.
Krishna.

You may need to activate some additional business content if not already installed but there are a lot BI statistics you can report on. Have a look at this:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/46/f9bd5b0d40537de10000000a1553f6/frameset.htm

Restrict Subject Areas

Similar Messages

Maybe you are looking for