Restricting Charecterstic using customer Exit variable

Hi Experts,
Please adivise how can I restrict values of a charectersitc Infoobject using a customer exit variable.
I have a InfoProvider which has a authorisation values from which I have to retrieve the authorisation values.
Regards,
Koka.

Thanks for the reply Bhawani, I have a function module to fill the Customer exit variable with the values retrieved from DSO.
Can you please explain me the second step mentioned or can I direclty call my FM in the Include ZXRSRU01..
WHEN 'XXXX '. ( customer Exit varaiable)
      CALL FUNCTION 'ZBI_LOAD_AUTH'
        EXPORTING
          I_AUTHVALTYPE = 'auth value'
        TABLES
          E_T_RANGE     = E_T_RANGE.
Regards,
Koka.

Similar Messages

Crystal Reports with BEx Query using Custom Exit Variable

Hi,
We have BW BEx Query using Customer User Exit variable to derive the Fiscal Week for Last Year (called it VAR2) based on another user input variable Current Fiscal Week (called it VAR1).
VAR2 is derived from VAR1 in CMOD via some codings and thus it DOES NOT have the "Variable is Ready for Input" flag ticked in the BEx. VAR1 is user input variable, so it has "Variable is Ready for Input" flag ticked in the BEx.
When we create a Crystal Reports with the BEx Query using variable VAR2, and when we run it we got an error message saying "Failed to execute query; '[]<java.lang.UnsupportedOperationException: No Selection State Support!ZP_MI_LYPUBWEEK>'. Redesign your query or contact the data source maintainer to solve the problem". (note: ZP_MI_LYPUBWEEK is VAR2 in this case).
Could anyone please assist? Surely, CR supports BEx customer user exit variables like the above, right?. I also refer to the forum below as it seems to have a similar issue (except mine with an error message), but it does not provide a solution in it.
Crystal Reports with BEx Query using Custom Exit Variable
Thanks,
Andy

Hi Vibhav,
We have the SAP Crystal Reports for Enterprise XI4.0 Version 14.0.0. Not sure if SP0 or other SP, got to check with Basis Team later.
We tried that "mandatory" option and did not work either.
Anyway, SAP has now come back again saying it is something they will fix it in next release/version. We got a phone call from them and a reply below to our OSS.
23.08.2011 - 08:20:49 CET - Info for Customer by SAP
I have raised this issue on the Idea#s Place as an enhancement request
on the below link:
https://cw.sdn.sap.com/cw/ideas/5586
This ER contains the information of including the customer exit
variables in the report without checking the #input for ready# option.
This ER can be considered for being implemented in the future
versions. You can refer to SAP Note: 1515837 - How To: Enhancement
Request Process - "Idea Place" for more information regarding the Idea
Place.
Cheers,
Andy

How to use customer exit variable in the report

Dear All,
i want to use a standard customer exit variable in the report properties.
In the Bex Query Designer right hand bottom you will find two buttons "Properties" and "Task". Click on task you will get different option. Choose properties from there and then select "variable sequence tab".
I need to add a standard variable there. How can i achieve it?
Appreciate your early help.

You need to add variable to corresponding charctertic then you can get that varaible for sorting the sequence....
If 0CUST is the varaible then you need to assign it 0CUSTOMER then 0CUST will be available for the sequence.
Edited by: shanthi bhaskar on Apr 2, 2009 5:41 PM

Behavior of customer exit variables (used as prompt) in a workbook

Hi All,
We are on NW2004s. I am using a customer exit variable in the prompt for my query then saved the query as a workbook.
1. When I run the query the customer exit routine/program is called and the selection screen variable is populated with the correct value.
Ex. Calendar year variable is a prompt variable defined as customer exit variable that gets the current year.
when you run the query the prompt for calendar year shows "2007" as default value. this is correct.
2. when I run the workbook using this same query, it looks like it is not executing the customer exit program. The value in the calendar year prompt is whatever the last value used when the workbook was last ran.
I also placed a breakpoint in the customer exit program (EXIT_SAPLRRS0_001) to check if it is being called and it looks like it isn't.
Is there a configuration/property that I should enable/check to make sure that customer exit variables used as prompts works in workbooks? Is this a bug? Anybody else have issues with using customer exit variables as prompts in their workbooks?
Thanks in advance,
Malou

Hello Marilou,
See the abswer I got from the 1st response on my question
Save and reuse variable option in 7.0
It may be a good help.
Variables seem to be an understated item in the documents.
Kind regards
Message was edited by:
BI developer

Customer Exit Variable in formula to get values for multiple keyfigures

Hi to all,
I have query as defined in following scenario:
CHAR_X     C_KF1 (based on KF1)     C_KF2 (based on KF2)     u2026     C_KFn (based on KFn)
Value1
Value2
u2026
Valuem
C_KF = calculated key figure
I need to create a customer exit variable that will search through selection e.g. CHAR_X/KF1 and give some result. I need this variable for every keyfigure (KF1-KFn). Using customer exit variable is the only solution.
My question is: do I have to create formula variable (customer exit) representing every keyfigure separately (VAR1 u2013 VARn, like in below example)?
CHAR_X     C_KF1 (using VAR1)     C_KF2 (using VAR2)     u2026     C_KFn (using VARn)
Value1
Value2
u2026
Valuem
Or is it possible to create one general formula variable since the way to retrieve the value in variable is always the same (like in below example)? In this case, how do I pass the value of the respective keyfigure to this variable?
CHAR_X     C_KF1 (using VAR_X)     C_KF2 (using VAR_X)     u2026     C_KFn (using VAR_X)
Value1
Value2
u2026
Valuem
Thanks for your replies, points will be awarded!
Cheers

That is my concern, the value of variable is not the same.
What variable should do is:
take KF1 id, go through values for CHAR_X, get back one value
This value would always be different, and also "KF" part in code of variable should be different, based on the column where the variable is being used (so, in column C_KF1 ,variable should "pick up" id of KF1, etc.).
I hope it makes it more clear. For now, I do not have the code for variable yet, I am just interested in concept whether it is possible to pass the ID of keyfigure dynamically so I can make decision how to model this request.
Thanks

Customer Exit Variable in SAP BI

Hi to all,
Please can any body tell me , What is Customer Exit Variable in SAP BI , how to use it , why we use it.
please also sned any website link , or any PDF or DOC file that have example to explain Customer Exit Variable in SAP BI.
I shall be thankfull to you for this.
Regards
PAVNEET RANA

Hi,
Customer Exit Variable in SAP BI : is used to calculata MTD,YTD, and some other calculations.
You can define variables with Customer Exits and then write code in CMOD. See the Article/Blogs in the same
https://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
CHeck the Following Articles.
Customer Exit Variables in BW/BI Reports
Using Customer Exit Variables in BW or BI Reports Part - 1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/using%20customer%20exit%20variables%20in%20bw%20or%20bi%20reports%20part%20-%201.pdf
How to use Customer Exit Variables in BW Reports: Part - 2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/g-i/how%20to%20use%20customer%20exit%20variables%20in%20bw%20reports%3a%20part%202.pdf
Using Customer Exit Variables in BW/BI Reports Part - 3
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10fc4382-afa6-2c10-1380-fa224fe4324f&overridelayout=true
Using Customer Exit Variables in BW/BI Reports: Part - 4
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0fefc77-40e3-2c10-8da3-d4bfcb013387?quicklink=index&overridelayout=true
Calculating the Ageing of the Materials
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/a-c/calculating%20the%20ageing%20of%20the%20materials.pdf
Thanks
Reddy

Customer exit variable in Planning filter - IP

Hi,
I am new to business planning. I am trying to use a customer exit variable in filter, while performing check system generates message "RFC failue error". the logic is written to get the current year. But I am not able to use this variable? Can you please answer me this question... Can I use Customer exit variables in planning modeler filters or planning functions ?

Hi there,
Yes you can, and it is used very often in both.
Probably your variable is wrongly defined.
What you can do is create a query over that aggregation level, and insert the planning filter in there. Put some key figure on the query and put a breakpoint on your variable customer exit code. Execute the query and debug the variable code to check the error.
Hope this helps,
Regards,
Diogo.

Executing customer exit variable in dropdown box. in WAD

hi Experts,
i have implemented two customer exit variables for current month and next síx months in a query and it is working well, and the code for customer exit variable is correct.
we have a requirement to use the customer exit variables in dropdown box in web application designer. in the dropdown box in web application designer i used command SET_SELECTION_STATE_SIMPLE in that 'command specific Parameters' i had given the exit variables current month and next six months.but after executing the web application designer and if i drill down the report with current month and next six months it's giving error message .
can anyone please tell me how to implement customer exit variables in web application designer through drop down box. i am using this in bi7 reports.
Regards
Sruthi Reddy

Hi,
Customer Exit Variable in SAP BI : is used to calculata MTD,YTD, and some other calculations.
You can define variables with Customer Exits and then write code in CMOD. See the Article/Blogs in the same
https://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
CHeck the Following Articles.
Customer Exit Variables in BW/BI Reports
Using Customer Exit Variables in BW or BI Reports Part - 1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/using%20customer%20exit%20variables%20in%20bw%20or%20bi%20reports%20part%20-%201.pdf
How to use Customer Exit Variables in BW Reports: Part - 2
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/g-i/how%20to%20use%20customer%20exit%20variables%20in%20bw%20reports%3a%20part%202.pdf
Using Customer Exit Variables in BW/BI Reports Part - 3
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10fc4382-afa6-2c10-1380-fa224fe4324f&overridelayout=true
Using Customer Exit Variables in BW/BI Reports: Part - 4
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0fefc77-40e3-2c10-8da3-d4bfcb013387?quicklink=index&overridelayout=true
Calculating the Ageing of the Materials
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/a-c/calculating%20the%20ageing%20of%20the%20materials.pdf
Thanks
Reddy

Why we use customet exit variables?

hi friends,
why we use customer exit variables. can u give me some examples at what scenerio we use
default/user entry, formula, text, hierchies and hierchies. ( with processing type is customer exit)
can i get atleast 1 scenerio for 5 types variables?
Thanking u
suneel.

Hi Suneel
Check info about Exits,
Replacement Path
You use the Replacement Path processing type to specify the value that automatically replaces the variable when you execute the query or Web application
check this link explains step by step
http://www.sd-solutions.com/documents/SDS_BW_Replacement%20Path%20Variables.html
Customer Exit:
If you need to use a processing type other than manual entry/default value, replacement path, SAP exit, or authorization, then a customer exit gives you the option of setting up a processing type for variables, tailor-made to your specific needs.
The customer exit is designed as an enhancement that you can configure with customer-specific logic
SAP Exit:
SAP exits are delivered content variables. Before creating any custom variable exit, its advisable to check if there are any SAP exits delivered to do the same functionality.
Check these links for SAP and Customer Exits,
To see SAP Exits -> Use Tcode SMOD
To See Customer Exits -> Use Tcode CMOD
There are projects to which Exits are assigned. Selects the relevant projects.
What is User Exit:
http://www.sap-img.com/abap/what-is-user-exits.htm
How to find then:
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
All Exits List:
http://www.easymarketplace.de/userexit.php
Thanks,
Sudhakar.

Using Formula Variable in Customer Exit variable

Hi,
I want to assign valuees of 2 Formula Variables to one cstomer exit variable based on some Characteristic.
Example. Formula variables are Early and Late. If Early = 3 and Late = 4 , I want to pass value to the Customer Exit variable as Low = 3 and High = 4.
The problem is in I_T_VAR_RANGE there is no value for formula variable in LOW field.
Other variables based on Characteristics have values in this field.
What can I do in this case?
Regards
SSS

SSS,
You can restrict your characteristic with two variables in the value range options of restricting.
One can be used as low and the other can be high.
Hope that helps.
Thanks.

How to identify what customer exit variables are used in which query?

Hi all,
When i happened to check the CMOD transaction code i can find a list of customer exits are used. But i want to know what are those customer exist are used in which query? can anyone let me know the procedure of identifying it.
Thanks a lot
Pooja

hii pooja
check the foll links
Very Urgent: Customer Exit Variable
customer exit variable
MIssing Authorisation for customer exit variable query
Authorization variable or customer exit variables
if it is helpful assign points
thanks.

Customer exit variables using the Table

Hi Experts,
I'm having the following scenario.
I have created the below table
OGVERSION   Fiscal Year1 OGVERSION1 Fiscal Year2   OGVERSION2
    001                   0                   100                  -1                  100
    002                   0                   100                    2                  200
      007                  3                     200                 1                   300
Now i need to create four customer exit varibles by using the OGversion value which is the variable by fillign with manula input. Here Fiscal year1 & Fiscalyear 2 fields having the values like 0,1,2,-1 means 0 --> Current Year, 1 --> CurrentYear +1 , 2 --> Current Yr +2, -2 --> Current Yr-2...like that.
Please let me know If anybody knows the ABAP for create these customer exit variables.
Regards,
Navin Achanta

Thanks for the reply. following is the code that is used in the exit.
does the code below affect the performance.
select FIELD1 from TABLE into table INT_TABLE
                                       where TCTUSERNM = SY-UNAME.
      if sy-subrc eq 0.
        loop at INT_TABLE into WA_INT_TABLE.
          l_s_range-LOW = WA_INT_TABLE-field1.
          l_s_range-SIGN = 'I'.
          l_s_range-OPT = 'EQ'.
          append l_s_range to e_t_range.
        endloop.
      endif.

Text Variable using Customer Exit .

Hello Friends. I have a requirement to create Text Variable using Customer Exit . So I created the Text Variable as "ZVRBMS" and assigned that with YTD &ZVRBMS& in the Structure of Query Desigener . so that Out put will YTD AUTO
OR YTD RETAIL
Now this Auto And Retail comes from Version that user choose via variable ZFIBMSVER IN User Promt. if ZFIBMSVER = 10
then ZVRBMS = auto . and if ZFIBMSVER = 20
then ZVRBMS = RETAIL
Please correct my ABAP code in customer exit and let me know to make this work
when 'ZVRBMS'.
    if I_STEP = 2.
      clear LOC_VAR_RANGE.
      loop at I_T_VAR_RANGE into LOC_VAR_RANGE.
        if LOC_VAR_RANGE-VNAM = 'ZFIBMSVER'.
      if SY-SUBRC = 0 OR LOC_VAR_RANGE-LOW = '10'.
        L_S_RANGE-LOW = 'AUTO'.
      elseif LOC_VAR_RANGE-LOW = '20'.
        L_S_RANGE-LOW = 'RETAIL'.
      L_S_RANGE-SIGN ='I'.
      L_S_RANGE-OPT = 'EQ'.
      append L_S_RANGE to E_T_RANGE.
endif.
endif.
exit.
      endloop.
endif.
Thanks
Soniya

The code should be:
when 'ZVRBMS'.
if I_STEP = 2.
clear LOC_VAR_RANGE.
loop at I_T_VAR_RANGE into LOC_VAR_RANGE.
if LOC_VAR_RANGE-VNAM = 'ZFIBMSVER'.
if LOC_VAR_RANGE-LOW = '10'.
L_S_RANGE-LOW = 'AUTO'.
elseif LOC_VAR_RANGE-LOW = '20'.
L_S_RANGE-LOW = 'RETAIL'.
endif.
L_S_RANGE-SIGN ='I'.
L_S_RANGE-OPT = 'EQ'.
append L_S_RANGE to E_T_RANGE.
endif.
exit.
endloop.
endif.

Table look up using value from customer exit variable

I have a customer exit variable, CURRMON, which the user enters in the format MM/YYYY. From this entry, I would like to do the following to calculate and display the number of business days in the selected month:
Do the following to get Business Days in month.
Use the KF "FBA Day" (CTAFBAD) from the CTA_M01 infocube and write ABAP routine.
1. Based on user entry cal month get the last calendar day .
2. Do a master data look up (CTAFBAC is the master data object), using the last calendar day from step 1.
3. CTAFBAD is the attribute of CTAFBAC so move the value of CTAFBAD to the result, and display this result
Can anyone help me with this?

Hello,
You can use i step = 1 in SMOD transaction and write the code there.
l_s_range-low = sy-uname.
append ls_range to e_t_range.
regds,
Shashank

Scenerios for using I_STEP parameter for creating customer exit variables.

Hi All,
I need to create a customer exit variable.
Please explain the different scenerios for using each i_step parameters.
For eg. in which practical scenerio i_step 3 is used?

Hi Shobhit,
You can find plenty of info on this in the forums, So i suggest you to do a small search with imp Key words. Anyways below is the std usage of I_STEP
I_STEP = 1
Call takes place directly before variable entry. Can be used to pre populate selection variables
I_STEP = 2
Call takes place directly after variable entry. This step is only started up when the same variable is not input ready and could not be filled at I_STEP=1.
I_STEP = 3 In this call, you can check the values of the variables. Triggering an exception (RAISE) causes the variable screen to appear once more. Afterwards, I_STEP=2 is also called again.
I_STEP = 0
The enhancement is not called from the variable screen. The call can come from the authorization check or from the Monitor. This is where you want to put the mod for populating the authorization object.
This is basic info from help.sap.com.
regards,
Gaurav
Edited by: Gaurav Kothari on Aug 4, 2011 2:18 PM

Restricting Charecterstic using customer Exit variable

Similar Messages

Maybe you are looking for