Restricting illness types in table T572B

We have a requirement as part of an ESS/MSS rollout to restrict the illness reasons to a set list. This list differs from the current list in the above table. Is there a way to restrict which list is shown depending on Personnel Subarea Grouping. The range of illness types is different, the one being used by other companies is 000001-999999, this has been created as A00001 - A99999.
Thanks
Hannah

You can use the material type specific transactionsminstead of MM01, remove the authorizations of MM01 transaction and add the required material type creation transactions
example - Goor Matreials create(special)
HIBE,NLAG,ROH
MMB1                 Create Semifinished Product(HALB)
MMF1                 Create Finished Product(FERT)
MMG1                 Create Returnable Packaging
MMH1                 Create Trading Goods
MMI1                 Create Operating Supplies(HIBE)
MMK1                 Create Configurable Material(KMAT)
MML1                 Create Empties
MMN1                 Create Non-Stock Material
MMP1                 Create Maintenance Assembly
MMR1                 Create Raw Material(ROH)
MMS1                 Create Service
MMU1                 Create Non-Valuated Material
MMV1                 Create Packaging
MMVH                 Create Centrally: Decentral.Shipping
MMW1                 Create Competitor Product

Similar Messages

Data inconsistency: posting with restricted transaction type (FAA_POST047)

Hi colleagues!
I have the following error:
Data inconsistency: posting with restricted transaction type
Message no. FAA_POST047
Diagnosis
You are trying to post in company code 1000 with transaction type 130 in ledger group 0N. According to table TABWA, this transaction type is limited. Nonetheless, according to your entries, you want to post to area 11.
System Response
Using limited transaction types is obsolete and would lead to an inconsistent posting in this situation. The system rejects the posting.
Procedure
Use a transaction type that is not limited. And, if possible, choose the ledger group and/or depreciation area on the initial screen.
According to specific accounting we shouldn't post to one of the depr. area, so most of the tr.types are restricted to post to all areas except this one.
Because of this, posting from MM with acc.assignment 'A' is impossible - I have this error.
Any ideas how to solve?
Thanks in advance

Hi Anton
This looks like your transaction type -130 is limited to post only in ledger group-0N as per the transaction type configuration. Due to which system is unable to post all the ledgers and hence this lead to inconsistency.
Please verify the transaction type 130- in configuration T code - OAYA and see if it is restricted by depreciation area (eventually allow to post only ledger group- 0N.
Tcode - OAYA (Limit Transaction Types to Depreciation Areas)
please verify and let us know the update. hope this helps
Best Regards
Jomon

Restricting Document type in F-63

Hi All,
Please help as this is required to restrict Document Type in F-63 ,our requirement is that we want to create some new roles and in that we can only process for one Document type say "ZA" only and that document type shud be by default set in the F-63, i know the object responsible for this is F_BKPF_BAL with actvt 01,02,03,04,06.08,10,22,43,77 but this object is not maintained in F-63 .
Please help with the max possibile way to restrict the same along with the actvt field . Or is there any other way to achieve the goal.
Thanks,
Chandresh

As you Pointed out the Object F_BKPF_BLA is the one which Check/Maintaines the Accounting Document: Authorization for Document Types
The object consists of the "Authorization group" and "Activity" fields. The authorization group can be freely defined by the user. You take the possible input values for the "Activity" field from table TACTZ.
If you want to use this authorization, proceed as follows: Defined by SAP
Enter an authorization group for the document types that are to be specially protected.
Define the authorization that you want to assign to selected employees, in which you list the authorization groups and the activities allowed.
Allocate this authorization using the corresponding profile.

"[Oracle][ODBC]Restricted data type attribute violation

Hi,
I have a program that use the database object,TQuery in Borland C++ Builder 5 to access information on an Oracle8i table. The program was working fine until I updated the Oracle8i ODBC driver from 8.1.5 to 8.1.6.
I am getting the error :
"[Oracle][ODBC]Restricted data type attribute violation."
I can't see what I have done wrong with the SQL statement in the query as it is only a select * from table statement. Can anyone help me with this ? Thank in advance.
C.M.

I think I had found what is causing the problem. It looks like the latest Oracle ODBC driver doesn't like any table that
consists of any 2 fields of type NUMBER but with 1 of them having
NOT NULL. >example : >Name Null? Type>-------- --------
----------------- NO1 NUMBER>NO2 NOT NULL NUMBER>I think this is
a bug. >null
I am not sure what you mean by the statement
"the latest Oracle ODBC driver doesn't like any table that
consists of any 2 fields of type NUMBER but with 1 of them having
NOT NULL"
Do you mean there cannot be two not null number columns in a
table witht he latest Oracle ODBC driver.
I am running into the same problem as you did. I am getting a
restricted type violation, and have isolated the column and it is
a number(x,y). I have the the Oracle Client 8.01.06.00 driver
and I have PowerBuilder8.0 as the GUI.
Any help would be much appreciated,
Thanks in advance,
Khanh

Types of tables

how many types of tables r there? diff?
diff between at new and on change of?

Hi,
Internal Tables as Data Types
Internal tables and structures are the two structured data types in ABAP. The data type of an internal table is fully specified by its line type, key, and table type.
Line type
The line type of an internal table can be any data type. The data type of an internal table is normally a structure. Each component of the structure is a column in the internal table. However, the line type may also be elementary or another internal table.
Key
The key identifies table rows. There are two kinds of key for internal tables - the standard key and a user-defined key. You can specify whether the key should be UNIQUE or NON-UNIQUE. Internal tables with a unique key cannot contain duplicate entries. The uniqueness depends on the table access method.
If a table has a structured line type, its default key consists of all of its non-numerical columns that are not references or themselves internal tables. If a table has an elementary line type, the default key is the entire line. The default key of an internal table whose line type is an internal table, the default key is empty.
The user-defined key can contain any columns of the internal table that are not references or themselves internal tables. Internal tables with a user-defined key are called key tables. When you define the key, the sequence of the key fields is significant. You should remember this, for example, if you intend to sort the table according to the key.
Table type
The table type determines how ABAP will access individual table entries. Internal tables can be divided into three types:
Standard tables have an internal linear index. From a particular size upwards, the indexes of internal tables are administered as trees. In this case, the index administration overhead increases in logarithmic and not linear relation to the number of lines. The system can access records either by using the table index or the key. The response time for key access is proportional to the number of entries in the table. The key of a standard table is always non-unique. You cannot specify a unique key. This means that standard tables can always be filled very quickly, since the system does not have to check whether there are already existing entries.
Sorted tables are always saved sorted by the key. They also have an internal index. The system can access records either by using the table index or the key. The response time for key access is logarithmically proportional to the number of table entries, since the system uses a binary search. The key of a sorted table can be either unique or non-unique. When you define the table, you must specify whether the key is to be unique or not. Standard tables and sorted tables are known generically as index tables.
Hashed tables have no linear index. You can only access a hashed table using its key. The response time is independent of the number of table entries, and is constant, since the system access the table entries using a hash algorithm. The key of a hashed table must be unique. When you define the table, you must specify the key as UNIQUE.
Generic Internal Tables
Unlike other local data types in programs, you do not have to specify the data type of an internal table fully. Instead, you can specify a generic construction, that is, the key or key and line type of an internal table data type may remain unspecified. You can use generic internal tables to specify the types of field symbols and the interface parameters of procedures . You cannot use them to declare data objects.
Internal Tables as Dynamic Data Objects
Data objects that are defined either with the data type of an internal table, or directly as an internal table, are always fully defined in respect of their line type, key and access method. However, the number of lines is not fixed. Thus internal tables are dynamic data objects, since they can contain any number of lines of a particular type. The only restriction on the number of lines an internal table may contain are the limits of your system installation. The maximum memory that can be occupied by an internal table (including its internal administration) is 2 gigabytes. A more realistic figure is up to 500 megabytes. An additional restriction for hashed tables is that they may not contain more than 2 million entries. The line types of internal tables can be any ABAP data types - elementary, structured, or internal tables. The individual lines of an internal table are called table lines or table entries. Each component of a structured line is called a column in the internal table.
Choosing a Table Type
The table type (and particularly the access method) that you will use depends on how the typical internal table operations will be most frequently executed.
Standard tables
This is the most appropriate type if you are going to address the individual table entries using the index. Index access is the quickest possible access. You should fill a standard table by appending lines (ABAP APPEND statement), and read, modify and delete entries by specifying the index (INDEX option with the relevant ABAP command). The access time for a standard table increases in a linear relationship with the number of table entries. If you need key access, standard tables are particularly useful if you can fill and process the table in separate steps. For example, you could fill the table by appending entries, and then sort it. If you use the binary search option with key access, the response time is logarithmically proportional to the number of table entries.
Sorted tables
This is the most appropriate type if you need a table which is sorted as you fill it. You fill sorted tables using the INSERT statement. Entries are inserted according to the sort sequence defined through the table key. Any illegal entries are recognized as soon as you try to add them to the table. The response time for key access is logarithmically proportional to the number of table entries, since the system always uses a binary search. Sorted tables are particularly useful for partially sequential processing in a LOOP if you specify the beginning of the table key in the WHERE condition.
Hashed tables
This is the most appropriate type for any table where the main operation is key access. You cannot access a hashed table using its index. The response time for key access remains constant, regardless of the number of table entries. Like database tables, hashed tables always have a unique key. Hashed tables are useful if you want to construct and use an internal table which resembles a database table or for processing large amounts of data.
AT NEW and ON CHANGE OF:
a) When AT NEW occurs,
the alpha-numeric fields have ******* in their value,
b) where as in case of ON CHANGE,
the alpha-numeric fields have their corresponding value,
of that particular record,
where the Event gets fired.
Other differences are :
ON CHANGE OF can be used any where in the program..
on change of differs from at new in the following respects:
1.It can be used in any loop construct, not just loop at. For example, it can be used within select and endselect, do and enddo, or while and endwhile, as well as inside get events.
2.A single on change of can be triggered by a change within one or more fields named after of and separated by or. These fields can be elementary fields or field strings. If you are within a loop, these fields do not have to belong to the loop.
3.When used within a loop, a change in a field to the left of the control level does not trigger a control break.
4.When used within a loop, fields to the right still contain their original values; they are not changed to contain zeros or asterisks.
5.You can use else between on change of and endon.
6.You can use it with loop at it where . . ..
7.You can use sum with on change of. It sums all numeric fields except the one(s) named after of.
8.Any values changed within on change of remain changed after endon. The contents of the header line are not restored as they are for at and endat.
while
AT NEW can be used only within a loop of an INTERNAL TABLE..
Jogdand M B

How to restrict change type in CC31

Hi ,
I have a new requirement in which I need to restrict change types in txn CC31 (Create ECR).onlya set of people should create a ECR with one change type and another set of ppl with another change type, but I am not able to find any auth object with the field CCART(Change types) to provide these restrictions .
Is creating a new auth object the only way ? please let me know if there is any other possibility or any other auth objects which can be used for the same ?
Thanks,
Nanda

Fields of such types (e.g. document types, master data accounts, etc) are often not the same field name that you are looking for in an authorization object, but rather grouped in their master records and the authority-check is against the assigned group value.
More often than not, if no group value is assigned to a record then no check is made.
So what you can try to look for is a BEGRU type field of an object in the code and look to see where it is gettings its value from.
Might be worth a try...
Cheers,
Julius

How to Restrict Material Type in MM01 ?

*Hi experts,*
*How to restrict material type ? i wanted to restrict the end-user not to access any other material types than Raw material,Semi-finished goods. it means when end user trying to create material then if he enters other than these two material types then he should get error saying that "your not authorized to select that xyz material type".*
*I have tried to restrict the object M_MATE_MAR(Material Master : Material type) but am unable to do so. is there any other object which take care of Material types ? did i selected correct object or not??*
*can anyone help out.*

Hi,
You have to make few configuration settings before you actually restrict at the object level. The solution is clearly discussed in the below thread:
how to restrict material master by material type t-code MM01
Hope this helps!!
Regards,
Raghu

How many types of tables exists and what are they in data dictionary?

hi,
How many types of tables exists and what are they in data dictionary?
regards.

Hello Liu,
Please search in forum before posting any question .
anyhow check the below link :
http://web.mit.edu/sapr3/dev/sap_table_types.htm
Thanks
Seshu

What are the differnet type of tables in mdm ?

hi experts i am new to mdm. just i have refered some documents in that the have created some table and fileds ,taxnomy,lokups,.......
so can any one give me the bref ida on
what is mdm ?
what are the different type of tables in mdm ? What is the requirement for the selection of table?
what is a feld ? what are the diff type of fealds in mdm ? And requriement ?
what is taxnomay ? And Requriement or where or when we can use ?
what is lookups in mdm ? what is lookup tables in mdm ?
what is mdm console ?
what is mdm data manager. ?
what is mdm import manager ?
what is mdm syndicator ?
please any body answer this questions .

Hello Praveen,
Below are the the all possible links of books,articles... etc for MDM.
http://hosteddocs.ittoolbox.com/RD021507b.pdf
demo
http://www.sap.com/community/int/innovation/esoa/demo/MDM_demo/index.html
http://www.asug.com/DesktopModules/Bring2mind/DMX/Download.aspx?TabId=66&DMXModule=370&Command=Core_Download&EntryId=3431&PortalId=0
MDM
http://www.asug.com/DesktopModules/Bring2mind/DMX/Download.aspx?TabId=66&DMXModule=370&Command=Core_Download&EntryId=1666&PortalId=0
SAP Netweaver MDM Overview
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b09b548d-7316-2a10-1fbb-894c838d8079
SAP NETWEAVER MDM Leverage MDM in ERP Environments - An Evolutionary Approach -
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4059f477-7316-2a10-5fa1-88417f98ca93
Master Data Management architecture patterns
http://www-128.ibm.com/developerworks/db2/library/techarticle/dm-0703sauter/
MDM and Enterprise SOA
http://www.saplounge.be/Files/media/pdf/Lagae---MDM-and-Enterprise-SOA2007.10.10.pdf
Effective Hierarchy Management Using SAP NetWeaver MDM for Retail
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70ee0c9e-29a8-2910-8d93-ad34ec8af09b
MDM World
http://mdm.sitacorp.com/
MDM: Master Data for Global business
http://www.sitacorp.com/mdm.html
MDM Master Data Management Hub Architecture
http://blogs.msdn.com/rogerwolterblog/archive/2007/01/02/mdm-master-data-management-hub-architecture.aspx
Improve Efficiency and Data Governance with SAP NetWeaver MDM
http://www.sapnetweavermagazine.com/archive/Volume_03_(2007)/Issue_02_(Spring)/v3i2a12.cfm?session=
Data Modeling i MDM
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d4211fa-0301-0010-9fb1-ef1fd91719b6
http://www.sap.info/public/INT/int/index/Category-28943c61b1e60d84b-int/0/articlesVersions-31279471c9758576df
SRM-MDM Catalog
http://help.sap.com/saphelp_srmmdm10/helpdata/en/44/ec6f42f6e341aae10000000a114a6b/frameset.htm
http://events.techtarget.com/mdm-ent/?Offer=DMwn716mdm
http://viewer.bitpipe.com/viewer/viewDocument.do?accessId=6721869
http://searchdatamanagement.bitpipe.com/data/search?site=sdmgt&cr=bpres&cg=VENDOR&sp=site_abbrev%Asdmgt&cp=bpres&st=1&qt=MasterDataManagement
http://viewer.bitpipe.com/viewer/viewDocument.do?accessId=6721819
http://www.dmreview.com/channels/master_data_management.html
http://searchdatamanagement.techtarget.com/originalContent/0,289142,sid91_gci1287620,00.html?bucket=NEWS&topic=307330
MDM Console -- http://help.sap.com/saphelp_mdmgds55/helpdata/en/88/9f9c427055c66ae10000000a155106/frameset.htm
MDM Import manager --http://help.sap.com/saphelp_mdmgds55/helpdata/en/43/120367f94c3e92e10000000a1553f6/frameset.htm
MDM DataManager --http://help.sap.com/saphelp_mdmgds55/helpdata/en/43/e0615a82b40a2ee10000000a11466f/frameset.htm
MDM Syndicator --http://help.sap.com/saphelp_mdmgds55/helpdata/EN/43/5fe0e8a55f5f6be10000000a1553f6/frameset.htm
Rgds
Ankit

HOW TO Restrict Absence Type LOV Self Service in 12.1.3

Hi All,
Will someone please inform of whar is the package to use for this new feature restriction as stated below. Thanks.
From new feature PDF 12.1.3:
3.26.4.6. Restrict Absence Type LOV
Prior to this release, all absence types created using Oracle HRMS are displayed to users in Self-Service HR. With this release, implementers can update ""a package"" to restrict the absence types that are displayed to users based on the business requirements. This feature ensures that employees enter only those absences for which they are eligible, and managers do not have to verify the validity of the absence type of employee requests.

Apologies for the delay here.
The package in question is hr_absence_restricted. You replace the Package Body of this package so that the function absences_restricted returns a comma-separated array of Absence Type ids that SHOULD NOT be displayed.
For example,
RETURN '123, 456, 789'
Would prevent Absence Type Ids 123, 456 and 789 from appearing in the user's List of Values. This is supposed to be described in the following Oracle Article but it's not published:
Oracle Article How To Restrict Absence Type LOV in Oracle Self-Service Human Resources (Doc ID 1122674.1)

How to create a Attribute "Type standard table OF" to a OSS NOTE

Dear experts,
I need to add new attributes in a standard class as per one OSS note. I took access key to add new attributes. I have a question.
class name: CL_J_1BEFD
Attribute: MT_GROUP_C350
Level: Instance
Visibility: Private
Type STANDARD TABLE OF mty_result
How do i add the instance attribute because i do not want to give the typing and associated type, instead i have to declare data: MT_GROUP_C350 type standard table of mty_result in class builder private section code.
if you look at the pushbutton between Associated type and Description, for all instance attributes there's a green color lining below the arrow. I want my attribute also to be exactly same.
Though i have access key, in private section the display<->Change button is disabled.
Please suggest me how do i add code in private section of a standard class. i have required access key to change the class.
Thanks,
Alysson

Hi Friend...
Thanks, but the question is...
When I went to transaction se24 or se80, I chose the class CL_J_1BEFD and second I swap to "CHANGE MODE".. after that the pushbutton is blocked... I can create the Attribute mt_group_c800 in the Class (using TYPE or LIKE option), but i can't change the code in the private session even using the assistant to modify it.
When I acess the Button "Detail View" the option "Direct Type Entry" is just unavaliable too, no matter what i do!
I coudn't find a way to create the Attibute like the note Describes (SAPNOTE NUMBER 1575772 - in the attachment of the note)
The changes are contained in the attachment
Follows the instructions retrieved from the file:
Add the following Attributes on the Class CL_J_1BEFD Private section
data:
mt_group_c800 TYPE STANDARD TABLE OF mty_result .
data:
mt_group_c850 TYPE STANDARD TABLE OF mty_result .
data:
mt_group_c860 TYPE STANDARD TABLE OF mty_result .
data:
mt_group_c890 TYPE STANDARD TABLE OF mty_result .
How can i make a way to creat this attributes using "TYPE STANDARD TABLE OF " Option?

How to specify the type of table in the form parameters

How to specify the type of table in the form parameters. for example, how to specify the type of table "vacancies".
FORM getcertainday
                   USING
                   vacancies TYPE STANDARD TABLE
                   efirstday LIKE hrp9200-zfirst_day
                   lfristday LIKE hrp9200-zfirst_day.

Hi
Are you asking about subroutine program to declare a variable for perform statement etc
if it so check this coding
DATA: NUM1 TYPE I,
NUM2 TYPE I,
SUM TYPE I.
NUM1 = 2. NUM2 = 4.
PERFORM ADDIT USING NUM1 NUM2 CHANGING SUM.
NUM1 = 7. NUM2 = 11.
PERFORM ADDIT USING NUM1 NUM2 CHANGING SUM.
FORM ADDIT
       USING ADD_NUM1
             ADD_NUM2
       CHANGING ADD_SUM.
ADD_SUM = ADD_NUM1 + ADD_NUM2.
PERFORM OUT USING ADD_NUM1 ADD_NUM2 ADD_SUM.
ENDFORM.
FORM OUT
       USING OUT_NUM1
             OUT_NUM2
             OUT_SUM.
WRITE: / 'Sum of', OUT_NUM1, 'and', OUT_NUM2, 'is', OUT_SUM.
ENDFORM.
If your issue is some other can u explain me clearly
Regards
Pavan

Calling Oracle Stored proc with record type and table Type

I have a oracle SP which takes record type and table Type which are used for order management.
Is there anay way to populate parameters with these datatypes and call the stored procedure using ODP.NET?
Please help.
Thanks in advance

Hi,
ODP supports associative arrays and REF Cursors. There is no support for PLSQL table of records.
Jenny

How does a record type and table type works

Hi,
How a record type and table type work for the ref cursor,
below i m giving an example but its giving me errors
can any one help me for this?
declare
type empcurtyp is ref cursor;
type rectype is record (veid t.emp_id%type, vename t.ename%type);
TYPE tabtype IS TABLE OF rectype;
empcv empcurtyp;
vtab tabtype;
begin
open empcv for select emp_id,ename from t;
loop
fetch empcv into vtab;
exit when empcv%notfound;
dbms_output.put_line(vtab.vename||vtab.veid);
end loop;
close empcv;
end;
here we hav table t and i m taking only two fields of the table t which r emp_id and ename.

Hi,
What errors are you getting with this? From experience you don't need a loop to put the records into the ref cursor its usually done on block.
HTHS
L :-)

Problem in passing select-options to class meathods , type any table

<h1>how to pass type any table to class meathod</h1>
<h3>hi all
       i'm trying to build class to validate the selection screen , like select-options and parameters
       while writing meathod to validate the select-options
       its throwing parameter mismath error</h3>
<h4>i tried like made import parameter in class meathod as 'TYPE ANY TABLE' and tried to pass select-options from my program it is saying type mismatch , how to overcome this problem </h4>
<h4>and i want to pass any select option , either of type lfa1-lifnr or mara-matnr or any other</h4>
Moderator message : Don't shout, use proper font size for explaining the question. This has been discussed in ABAP forums before. Search for available information. Thread locked.
Edited by: Vinod Kumar on Sep 14, 2011 11:20 AM

hI
Triggering and Handling events
At the moment of implementation, a class defines its:
         Instance events (using the EVENTS statement)
        Static events (using the CLASS-EVENTS statement)
Classes or their instances that receive a message when an event is triggered at runtime and want to react to this event define event handler methods. Statement: METHODS
CLASS IC1_VEICHLE DEFINATION.
PUBLIC SECTION.
METHOD CONSTRUCTOR IMPORTING
EVENTS VEICHEL_CREATION.
ENDCLASS
CLASS LC1_VEICHLE IMPLIMENTATION.
METHOD CONSTRUCTOR
RAISE EVENT VEICHLE_CREATION.
REWARD IF USEFULL

Restricting illness types in table T572B

Similar Messages

Maybe you are looking for