Restriction to the display of avalability queries /preferred fares

Hello all,
I would like to setup in travel planning a restriction to the display of avalability queries.
Imagine that there is not any available flight or car to rent for the client negotiated fares. In this case it will not show any result unless if is a negotiated fare/service provider is available..
Where /how can i restrict this display. The travellers can only rent a car in a certain company, it means if the company is not available for the location the query result should be : zero results.
Thanks in advance for your support.

This issue is already solved long time. Updating and closing this case.
After some investigations we detect that was not really a problem, but the normal system behavior.
What happen were in the case priorities not available is showing us the non preferred companies for which we got an error when trying to check the details for booking a car.
As that we have changed the customization in Table: V_TA20B_2. That solves the issue.
Thanks.

Similar Messages

How to restrict the display of report variants

Hello All,
I want t know how to restrict the display of report variants.
I mean, when a user saves a variant for his/her purpuse on some report program, only he/she can refer the variant while other users cannot.
I know that by setting the attribute of the variant ("Protect Variant ", "Only Display in Catalog"), this would be possible, but I want to know another way, without this setting.
Thank you for your help in advance.
Regards,

Hi,
Can you just try this
DATA:it_varid TYPE TABLE OF varid.
DATA:wa_varid TYPE varid.
INITIALIZATION.
SELECT * FROM varid INTO TABLE it_varid
      WHERE report = sy-repid
      and ename = sy-uname.
IF sy-subrc = 0.
    LOOP AT it_varid INTO wa_varid .
      CALL FUNCTION 'RS_SUPPORT_SELECTIONS'
        EXPORTING
          report               = sy-repid
          variant              = wa_varid-variant
        EXCEPTIONS
          variant_not_existent = 1
          variant_obsolete     = 2
          OTHERS               = 3.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDLOOP.
ENDIF.

Change the display of the multiple Table items using a single Drop-down

I have created a Web Template in BEx WAD (BW 3.5) with 4 Tables assigned to 4 dfferent Queries. Now I want to change the display of the all the Four Tables based on the selection of display properties chosen in a single Dropdown item. The properties to be selected in the dropdown are like changing the Alternate style display of Rows, Suppress Alternate Style, Display only 30 Rows or 60 Rows.
Please help me in writing the script necessary to pass the command from the dropdown to all the Tables to get the desired output.
Thanks,
Krishna
Edited by: Hari Krishna Velampalli on Oct 26, 2008 12:00 AM

Dipika, Thanks for the response.
I tried using that option but again since we cannot give custom options in a drop-down,
I created a Form with a drop-down list of options like Suppress Result Rows, Suppress alternate style of rows, Display only 30 Rows, Display only 100 rows .. and so on.
Now I am able to change the display of my first table by selecting the options in the drop-down list. But my intention is to apply that selection to Multiple Tables.
How can I achieve that?
HK

Restrictions on the size of blog entry

When I publish a blog entry 200 words about it is appeared properly. But if I write a great article, I see only a blank space on the blog page. But on the front page of the blog in summary form, everything is fine. Does anyone know what is the problem.

James Christopher wrote:
is their any restrictions on the size of the internal Hard drive
mac book G4 12in.
You might take a look at your System Profiler description of the machine. Select "About this Mac" from the Apple menu, then click the "More Info" button (at least that's what is says in Tiger). Or you can just launch System Profiler from the Utilities folder.
In either event, you will open to a Hardware Overview like this (except yours will be for the laptop)
Hardware Overview:
Machine Name:          Power Mac G5
Machine Model:          PowerMac7,2
CPU Type:          PowerPC 970 (2.2)
Number Of CPUs:          2
CPU Speed:          2 GHz
L2 Cache (per CPU):          512 KB
Memory:          5 GB
Bus Speed:          1 GHz
Boot ROM Version:          5.1.4f0
(Note, if you post, do not post your machine's serial number, which will be in the display.)
That being said, my TiBook from 2003 now has a 160G Hitachi Travelstar in it, which was the largest IDE little drive I could get at the time. If your machine is in that time frame or newer, you can put in pretty much anything they make now. Of course, if it is truly a MacBook, then the SATA laptop drives are getting very big.
You can get some more information at this OWC link which will allow you to see how big an IDE drive you can put into a G5 PowerBook.

MS Access 2013 - There isn't enough free memory to update the display

In Office 2013, in MS Access, I have only created a few Linked tables & queries, but encountered the following error:
"There isn't enough free memory to update the display. Close unneeded programs and try again"

Hi,
In regarding of the issue, please provide us more information to assist you better.
Did the error message pop-up with the special Access database or the some other databases?
If it only happened with the special Access database, it might be caused by the database damaged. Please try to Compact and Repair feature mentioned in the following article:
https://support.office.com/en-us/article/Compact-and-repair-a-database-6ee60f16-aed0-40ac-bf22-85fa9f4005b2
Then, we also might check the Linked tables & queries of database, it also might cause this issue. Or you could upload a sample here via OneDrive.
If the other database also has the issue, please try the method in that
thread:
===
This might be caused by a corrupt VBA registry key. Open your registry editor by clicking START >> RUN and then type regedit and click ok. Then navigate to the registry key below and delete it. When you try to run the VB editor again a new registry
key will be created.
HKEY_CURRENT_USER\Software\Microsoft\VBA
You'll also want to try booting the PC itself into Safe Mode to see if the problem persists.
===
Hope it's helpful.
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Need a Tcode Similar to CJR2 with some restrictions in the selection scr

Hello Experts,
I need a Tcode which is Similar to CJR2 but with some restrictions in the selection screen.
CAN ANYONE THROW A LIGHT HOW TO ACHIVE THIS.
Thanks a lot in advance.
Regards,
Vasanth M

Hello Experts,
I have tried with the Transaction Variant. It works but I want to make display only for the version,Starting and closing period and Year. Other fields should be open for input(Cost Element and WBS element)
But the transaction variant is making DISPLAY ONLY for all the fields.
Please tell me a suggestion how I could achieve it.
Thanks a lot in advance.
Best Regards,
Vasanth M

Difference in the display/rendering between two 7.4 portal systems

Hi everyone,
At this moment we are faced with a difference in the display/rendering between two 7.4 portal systems (see red area’s in screenshots). Both systems are green field installations.
At our LAB system with EP-BASIS 1000.7.40.7.0.20140421205300 and EP-RUNTIME 1000.7.40.7.0.20140414131600 the portal is rendered as follows:
Our development system DEV is based on EP-BASIS 1000.7.40.8.7.20141217073700 and EP-RUNTIME 1000.7.40.8.13.20150106224500. The portal is displayed as follows:
Both portal systems use the standard SAP Gold Reflection theme.
The expectation was that the DEV portal would have the same view as the LAB portal. Unfortunately, it appears that the DEV portal falls back to the older standard SAP Tradeshow theme when displaying (for example) the Portal Content Studio or the UWL. Different stylesheets (CSS) are loaded. There is no unified rendering and in our opinion this is not correct.
SCN provides much information about the various rendering problems that exists in the use of Internet Explorer in combination with the SAP Portal. However, it is unclear to us where to start with the analysis of this problem.
Answers / suggestions to the following questions will be highly appreciated:
Is it correct that the portal by default should make use of UR when the SAP Gold Reflection theme is used?
Is the difference of rendering caused by the difference in the versions of the EP BASIS / EP RUNTIME? (DEV portal has higher SP/patch level than LAB);
How to investigate this issue further and finally solve it?
Thanks in advance!
Kind regards, Allan

Hi Allan
I hope you are well and many thanks for using the SAP Discussion Forums .
Ok firstly in relation to this particular query, you can find additional information in the following documentation SAP Note:1852400 - UI theme designer (main note) .
Regarding the GOLD Reflection theme from a general perspective this is supported only alongside the UFP framework.
SAP Gold Reflection supports only Unified Rendering Lightspeed
In relation to your two other queries. Could you kindly clarify which particular version of IE you are presently running and also if compability mode is presently enabled/disabled?
Reference Documentation Look & Feel, Framework Pages and Portal Navigation
http://scn.sap.com/docs/DOC-23058
Kindly update me as per your findings.
Kind Regards
Troy Cronin - Enterprise Portal Support Engineer
Follow - Troy Cronin

How to fix the display width of a query

Hi,
I have a query in BEx query designer with some characterisitic columns & key figure columns showing data for 12 months of a year. Right now I am able to see only 4 months data at a stretch. I want to narrow down the display of the characteristics and fix the display length of the 12 months key figure data. I want that all 12 months data should be visible in the window without having to scroll right. Can anyone help me?
Thanks in advance.
Surabhi

The number of columns or rows visible within a single page of a query is determined by the Paging setting of the ANALYSIS item in the 0ANALYSIS_PATTERN Web Template. Here you can select whether you want 4 columns or 12 and how to scroll across or down pages.
Be warned though, this web template serves as the default template for all BI7 queries so any changes here will be universal across your system.

Global change to the display way of characteristic - key & text

Dear Experts,
All over my queries, 0PROFIT_CTR displayed by default as Key (partially compounded) & Text.
Is there a way to change it globally to Key (not compounded) & Text ?
I didn't find any setting regarding the Key display on RSA1..
Any ideas?
Thanks,
Ron Lampel.

The example Kamlesh points out is work-around method that certainly will get the job done for you. The other way would be to add the report to a custom web template and in there, under Web template Parameters, you have to pre-define a SET_PRESENTATION command. You can read about it here:
[http://help.sap.com/saphelp_nw04s/helpdata/en/43/d8c6dcc0700235e10000000a11466f/frameset.htm|http://help.sap.com/saphelp_nw04s/helpdata/en/43/d8c6dcc0700235e10000000a11466f/frameset.htm]
At least this is the only thing I've found.. I'm kind of in the same boat with not being given a whole lot of options in how you would like a Characteristic to display on a report in the BEx Query Designer. In my case, we have a characteristic set to use a Hierarchy. If you run the report and drop down the FILTER drop-down to filter on the characteristic, and it's showing the Hierarchy Node display, it doesn't just show the Hierarchy Parent/Child values.. it also has every ATTRIBUTE that's set to be navigational displayed on the same lines as it's parent value. Some chars, like 0CUSTOMER, have a LOT of Attributes. I can set a PERSONALIZATION up for myself at run-time and take those attribute values away from the display, but gone is the option to remove it at the DESIGN level.. it does not exist in the front-end nor back-end (at least what I could find). It looks like SAP took a lot of options away. It may be more efficient in terms of the program itself being more optimal, but removing those features actually hurts more than it helps, especially for companies who need to display certain characteristics outside of the "norm".
I haven't gotten the above link to work in my situation yet, but that's what I've found that sais you should be able to do what it is your doing.

System pref- what do the display numbers mean &other questions

1. are they the choices that the mini (purchased 9/07) can "send to the display" or are they the monitor's only display choices built into the monitor (like 1024x 768)
2. whats the advantage if any of a widescreen LCD display
3. will any "cheap- ie $200-300 LCD viewsonic. samsung, HP monitor work with my new mini if the monitor has a dvi or vga plug?
Its now running my old proview CRT I paid like $129 for .
4. does the mini have a set / preferred resolution range, again like the 1024 x 768
Thank you

Great questions edwardh1. I'll tell you what I think are the answers.
1) The mini does contain several pre-installed resolutions, so it is aware of several "standard" resolutions without any reliance on a display driver. However, whether or not the mini makes some or all of these resolutions available to the attached display will depend on how the mini "detects" the display.
2) Widescreen is much better for modern digital media. For example, DVD playback on a widescreen is much nicer than on a conventional screen. It's also nice to have a little extra width when using certain programs that have tool palettes. You can stick the palettes off to the side where they don't interfere with your work area. And if you go really big, like a 24" monitor, you can put two pages side-by-side, which can result in a real boost in efficiency with certain tasks.
3) As to whether any monitor will work with a mini, in theory the answer is yes. But if you hang out on these discussion boards long enough you will see that the road is full of potholes. Apple, as has been the case for a number of years, is always on the leading edge of new technologies, with Windows in a trailing position. If you want examples, think of USB, FIrewire, Bluetooth, DVI...the list goes on and on. Macs use a modern plug-and-play architecture for delivering the display driver to the host (Mac). Windows can perform this trick, but they also have a legacy system where the user installs the display driver (usually from a CD ROM) or else a wizard installs the driver from the internet. The problem with old habits on Windows is that they die hard. So even though modern displays for the most part correctly implement plug-and-play drivers, which in theory Windows does support, there are plenty of cases where the display manufacturers blow it and fail to do a good job of it. Instead they ship the Windows driver on a CD and call it a day. So you can be 90+% confident of a good result when buying a non-Apple monitor, but by no means is it guaranteed.
4) This question is very similar to your first question. Yes, the mini will have pre-installed several standard timings. I am sure 1024 x 768 would be on that list.
My final comment would be don't worry too much about buying a third-party display. Go for what you want with the confidence it will most likely work just fine.

Standard Display Roles For Queries in BW

Dear All,
Could you Please share the Standard Display Roles For Queries in BW.
Thanks
Regards,
Sai

Hi Sai,
You can find query specific roles in metadata repository.
Also try this table in
SE16. AGR_OBJ
Other useful tables might be:
AGR_DEFINE -      Role definition
AGR_USERS -      Assignment of roles to users
AGR_HIERT           Role menu texts
AGR_AGRS           Roles in Composite Roles
If you need to find user specific roles, check Tcode SUIM.
Hope this helps.
Thanks

Masking the displayed destination in Call Redirect situation

We have a Helpdesk script in UCCX that redirects the caller to a specific internal DN during on-call hours (after hours), instead of routing to the CSQ. Helpdesk technicians change a call forward all setting on that redirect DN to reflect whatever external mobile phone number is on call during a particular week.
The problem is that we do not want to disclose the redirect destination (neither the internal DN nor the currently assigned call forward all external mobile number). Currently, once the redirect is successful and the system calls the on-call mobile number, the original internal caller to the Helpdesk will see that final destination number displayed on the phone placing the call.
How can I manipulate the display of the called number for that call redirect?
Thanks a lot for any pointers,
Matthias

Thank you very much, that did the trick! :-)
I'm quite the newbie in UCCX so I wasn't sure if I just couldn't find it there due to my lack of experience... I tried the translation pattern in CUCM instead and that worked without a hitch. I now have UCCX redirect to the pattern configured in CUCM, which translates to my internal on-call destination. What's nice is that I can separately control called name and number restrictions... I restrict the number only but can still display the name label of the internal extension.
Matthias

Use of the "Display file hierarchy" for docmentation purposes

In teststand 4.1 the Display file hierarchy was introduced. I want to use the generated call graph and legend for documentation purposes (preferably in an automated mode). I have modfied the doc_gen seqence provided with Teststand to suite most of my needs, but I cannot find any methods to access the call graph
Anyone does this before or have additional information on how to to this
Regards Øyvind Standal

A method to retrieve the call graph would be great!
I just discovered that NI Idea Exchange only has a forum for LabVIEW. Maybe it's time to add TestStand the the Idea Exchange. Where do I suggest this idea?!
Message Edited by Phillip Brooks on 08-19-2009 01:56 PM
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

How to find the Display Template associated with a JSP ?

Hi All,
We have a requirement to alter the text on few buttons and headers for a Published Site. I have modified the Seeded JSP and saved as xxseeded.jsp and deployed in $OA_HTML. Now i want to add this custom JSP to the Display Template but i don't know how to find the Display Template Associated with the Seeded JSP. So, i need to know the Programmatic access name for the Display Template which uses this Seeded JSP as Source file. Is there any where i can check?
Thank you

Hi,
Use the below queries
Use the below query to get the Template name for the associated JSP file.
SELECT I.ACCESS_NAME, A.FILE_NAME FROM JTF.JTF_AMV_ATTACHMENTS A, APPS.JTF_AMV_ITEMS_VL I, IBE.IBE_DSP_LGL_PHYS_MAP M, IBE.IBE_MSITES_TL S WHERE A.ATTACHMENT_ID = M.ATTACHMENT_ID AND I.ITEM_ID = M.ITEM_ID AND M.MSITE_ID = S.MSITE_ID and a.FILE_NAME like 'Jsp file name here'
Same query can be little modified to get the File name from the Template name.
SELECT I.ACCESS_NAME, A.FILE_NAME FROM JTF.JTF_AMV_ATTACHMENTS A, APPS.JTF_AMV_ITEMS_VL I, IBE.IBE_DSP_LGL_PHYS_MAP M, IBE.IBE_MSITES_TL S
WHERE A.ATTACHMENT_ID = M.ATTACHMENT_ID AND I.ITEM_ID = M.ITEM_ID AND M.MSITE_ID = S.MSITE_ID and I.ACCESS_NAME like ‘template name here’
Thanks
Pradeep
Edited by: Pradeep Kalyan on Feb 9, 2012 9:40 PM

I'm trying to work on the FaceTime in my iPad but is not even showing off the icon in the display !! How can I find it

How can I install or let the FaceTime work in my iPad 4G
I can't even find the icon of it int the displayed list also
While in the setting is already on as notification
Or how to set-up a FaceTime account ??

Go to Settings>General>Restrictions and make sure that it has not been disabled. Go to Settings>FaceTime and make sure that you've activated it.

Restriction to the display of avalability queries /preferred fares

Similar Messages

Maybe you are looking for