Result reporting entries missing

Hi,
I'm having an issue with my results file. If I run the teststand sequence on the development Pc it works fine but when I deploy the code and run it on a deployment PC the html fail summary only shows the first fail.
e.g.
4.1 Test x fails
4.2 Test y fails
The fail summary only shows the first fail.
My suspicion is that there is something in the public folder that is altering the html reporting mechanism. I removed reportgen_html from the directory:
C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 4.2.1\Components\Models\TestStandModels
but the problem still persists. Does anyone know what could be causing the failure?
Thanks,
Sean
Solved!
Go to Solution.

The problem was actually the reportgen_html.seq file as I had first guessed.
The deployment tool was pulling the an older version of reportgen_html.seq.
The headache is over.

Similar Messages

Trying to save as PDF/A-1a: "Structure tree root entry missing" and "MarkInfo missing"

I would like to convert born-digital documents originally created in Word 2007 to the PDF/A-1a standard.
From Word, I am only able to Print to PDF/A-1b. I did that, opened the resulting PDF in Adobe Acrobat 9.3 Professional, and tried running the Preflight to save the PDF as a PDF/A-1a. I received the following two errors:
"Structure tree root entry missing"
"MarkInfo missing"
I'd like to know if there's a way I can remedy this situation, either from the Word doc or the PDF doc. Thank you.

I imagine that the original poster would like for a solution that simple to work. I also imagine that s/he gets the same error message I do every time I try to create a PDF from a Word document in the suggested way:
"Acrobat could not open '[file name].doc' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
To create an Adobe PDF document, go to the source application. Then print the document to Adobe PDF or use the Acrobat toolbar found in Microsoft Office applications."
Is there any way to convert the PDF you get from printing to PDF to PDF/A-1a successfully?

Reports 10g Missing information during file conversion

I have a large report that includes several graphs that keeps giving me an error during conversion that says the report is missing information and cannot create the file. I have never seen this before this report. It is actually giving me the message REP-1067 Some information is missing in the report. It just seems to happen when I add another graph. There is no information on REP-1067 in searching in the forums which does not give me a lot of hope.. Anyone have any ideas where to look. Report Builder 10g, Database 10g.
There are already several graphs in the report, so I don't believe it is a graphing issue.
Edited by: jdev_p8baller on Nov 11, 2011 1:00 PM

Hi,
check this if it is helpful.
TABLES: likp, lips,itcpo.
DATA: pdftab type standard TABLE OF tline,
datab TYPE standard TABLE OF itcoo.
itcpo-tdgetotf = 'X'.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
DEVICE = 'PRINTER'
DIALOG = 'X'
FORM = 'Z1989_PRAC'
LANGUAGE = SY-LANGU
OPTIONS = itcpo
// call script using start_form and write_form.
CALL FUNCTION 'END_FORM'
IMPORTING
RESULT = gi_ofc
CALL FUNCTION 'CLOSE_FORM'
TABLES
OTFDATA = datab
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
CODEPAGE = 5
OTHERS = 6
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
IMPORTING
BIN_FILESIZE = BINFILE
TABLES
otf = datab
lines = pdftab
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE = binfile
filename = 'D:\MYFILE.PDF' //give the address where u want output.
FILETYPE = 'BIN'
tables
data_tab = pdftab
Regards
Rajesh Kumar

Budgetary Control Results Report - GL Super User

General Ledger Super User > Requests > Single Set > Budgetary Control Results Report.
I believe this is new to R12 to be able to run from the GL. All reports are active per note [Article ID 1161866.1]. The problem is I'm not getting any XML besides something along these lines:
<?xml version="1.0" ?>
- <REPORT_ROOT>
- <PARAMETERS>
<PARA_LEDGER>104</PARA_LEDGER>
<PARA_PERIOD_FROM>OCT-12</PARA_PERIOD_FROM>
<PARA_PERIOD_TO>DEC-12</PARA_PERIOD_TO>
<PARA_APPLICATION_SHORT_NAME>SQLGL</PARA_APPLICATION_SHORT_NAME>
<PARA_FUNDS_CHECK_STATUS>F</PARA_FUNDS_CHECK_STATUS>
<PARA_FUNDS_CHECK_ORDER_BY>A</PARA_FUNDS_CHECK_ORDER_BY>
<URL>http://denof14.nbc.gov:8090</URL>
<REQUEST_ID>11000511</REQUEST_ID>
</PARAMETERS>
<TRANSACTIONS />
</REPORT_ROOT>
So obviously no report is being generated. Am I missing something to get this report going from GL? Any ideas for what I might be missing or what path to go down would be greatly appreciated.

Windows XP.
Database Server
RDBMS : 11.2.0.2.0
Oracle Applications : 12.1.3
I'm not sure what exactly you are asking for on the concurrent request. Here is the request detail, http://screencast.com/t/tq6a8B3Zi6Vc . I ran it using different layout versions and they all produced the same results. Below is the log. Let me know if I'm missing something you requested (Don't believe I have access to pull OPP log file......if this would be a great help I can put a request in).
Public Sector Financials: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
PSABCRRP module: Budgetary Control Results Report
Current system time is 29-DEC-2011 07:57:37
**Starts**29-DEC-2011 07:57:38
**Ends**29-DEC-2011 07:57:40
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Output file size:
447
------------- 1) PUBLISH -------------
Beginning post-processing of request 11000511 on node DENOF11 at 29-DEC-2011 07:57:41.
Post-processing of request 11000511 completed at 29-DEC-2011 07:57:41.
------------- 2) PRINT   -------------
Printing output file.
Request ID : 11000511
Number of copies : 0
Printer : noprint
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 29-DEC-2011 07:57:41
---------------------------------------------------------------------------

Standard Report for missing parts at production order operation level?

Hi PP Gurus,
            We have standard report for missing parts at production orders level.
For our client, they need a report for missing parts analysis at production order operation level. Do we have any such standard report in the SAP?
Please help.
Thanks,
Reddy.

Hi Arvind,
      Thanks for for your response.
1. List: Components, Layout: Standard layout          set the Missing part
       It shows the component requirement/withdrawn quantity for each operation of production order. It is not showing the commit quantity.
2. List: Components, Layout: Pick list          set the Missing part
       It shows the component requirement/withdrawn quantity for each production order.
3. List: Components, Layout: Missing Parts List-Material View          set the Missing part
       It shows the component requirement/commit quantity for each production order. It is not showing the commit quantity at opertion level.
4. List: Components, Layout: Missing Parts List-Order View          set the Missing part
       It shows the component requirement/commit quantity for each production order. It is not showing the commit quantity at opertion level.
      We are unable to get the solution from all these 1 to 4 reports from COOIS.
Do we have any option to change the existing layout (ex: 3 ) to get the commit quantity for operation with missing parts indicator?
If avilable, what is the procedure to be followed?
Thanks,
Reddy.

Need to create link to Word Doc in blob column in search results report

I got the Oracle Text boolean search of word documents in a blob column of a table working.
Now I need to be able to create a link in the results report.
I know that Oracle creates a link for each document in the column when you attach a file, I just need to know what the link should be to allow users to open the document in the search results report.
Right now the application is set to do a search in the attached word documents, and in the results window it shows the names of the people who match the search, but it won't allow me to create a link to their resume in the results report.
the name of the table is CONTRACTOR_LIST and the blob column is RESUME.
How would you go about creating a simple link to the word file in the results window?
Here is the code for the query
select score(1) relevance, Name, Resume
from contractor_list
where CONTAINS (resume, :P1_SEARCH, 1) > 0
order by 1 desc
That works, but I can't get it to link to the resume file.
Here is the code I'm using for the link
javascript:popupURL("#RESUMEL#")
This just give me an error page and the the link is
http://server-namer:8080/apex/[datatype]
the error is
Bad Request
The HTTP client sent a request that this server could not understand.
Thanks again!
Edited by: gjones77 on Dec 2, 2008 6:14 AM
Edited by: gjones77 on Dec 2, 2008 7:08 AM

It is within the table I believe (I'm not a DBA or a developer) since I created a BLOB column and then used the file browse feature to allow users to attach a resume to the table in order to be able to perform a search of the attached documents.
I'm just having a hard time pointing the link in the search results report to the document in the blob column.
The information on that page is great if you're trying to create a link to the document on the initial report.
But I created a query using Oracle Text to run a report that does a boolean search of the attached word documents in the table.
When it displays the search results, it doesn't create a link to the document and I can't figure out how to do it.
Here's a link the the instructions I used to create the initial search report with Oracle Text, mind you I only created the index and query, I didn't add in all the link data since they're using documents on websites and I'm using documents in a table.
http://www.oracle.com/technology/products/database/application_express/pdf/apex_text_application_v1.6.pdf
If you can help me with this I'd really appreciate it.
Thanks again.
Greg
Edited by: gjones77 on Dec 2, 2008 8:14 AM

How to solve this "Prefix number: entry missing for system EC5 client 800"

Hi,
I am workflow learner, I am having theoretical knowledge on it.
Now, I started to practice practically in my IDES server.
I am getting an error message while I am trying to save my standard task with my object type and method and event (which were already created in SWO1).
My error message details.....
Prefix number: entry missing for system EC5 client 800
Message no. 5W023
Diagnosis
Tasks, rules, and workflow definitions require an ID that is unique throughout all systems and clients. In this way, you can ensure that you can transport these objects from one system into another at any time (without restrictions). From a technical point of view, the uniqueness of the ID is ensured by what is known as a "prefix number". You can define a separate prefix number for every system and every client in table T78NR.
System response
If a prefix number is not defined in the client in which you are currently working, it is not possible to maintain (maintenance terminates).
Even I tried to create on entry in the table T78NR, but as that is standard table, I am unable to make an entry.
Hope we have to configure the workflow, I am not having any Basis consultant with me. Can anyone help to cross this problem.
Thanks and Regards,
Surender Batlanki.
Edited by: Surender Batlanki on Oct 15, 2008 2:20 PM

HI Surender and Other SAP Work flow gurus
Surender, u said, that you got the solution.
As honestly speaking i am new to SAP Workflow. Can u please please guide me the instruction and document if any. I am practising in Test Server machine. I will be really happy that if u all GEMS helps me to get out of it.
in Prefix number OOW4, system is asking me to enter, the Prefix number, Interval start, Interval End, and Check Sum.
I entere the same 980 in prefix number, and i dont know what to enter the Interval start and interval end and check sum.
Also there is some msg coming when i tried to manage some values, " NO Intervals can be reserved for this prefix number" - MSg No: 5W179.
Please gurus help me.
Regard
Guru

Archiving Object - Entry missing in Customizing table for object Z*********

Hello friends,
We have created a archiving object in transaction AOBJ. However when i enter this object in SARA, we get this error message.
"Entry missing in Customizing table for object Z******* "
I have matched my object with few other archiving objects and things looks similar.
Have you faced this kind of problem..
thanks
ashish

Hi,
I checked and i can see entry for ZSCS_TRAFO object in AOBJ.
But when i enter ZSCS_TRAFO, i get this error :
Entry missing in Customizing table for object ZSCS_TRAFO
Message no. BA057
Diagnosis
A function cannot be executed due to a missing table entry.
Procedure
Please create an entry for the archive object ZSCS_TRAFO with the AOBJ transaction.
However, a few other Z objects works well.
thanks
ashish

CO-PC Drilldown Reports are Missing

In the process of creating new Drilldown Reports, it appeared that some Standard Reports were missing, so I reimported the reports from Client 000. Now I cannot access an of my reports. I have an entirely different menu in KKO0 and I think it reset something to prior to version 4.0 (we're on 4.6c) whan the trees changed. All of the reports are still visible in the Tables, but not in any of the reporting trees. ANd if I try to run a report such as S_ALR_87013151 - Actual/WIP: Aggregated - I received errors that the report does not exist. Does anyone have any ideas?
Thank You Pam

I ran the Import program (RKCOBTR3) in DEBUG and stumbled across RKKBOLDR.
SAP also send me a message in reference to this, this morning. See Below:
Regards... Pam
+I guess you run (by accident) the report RKKBOLDR - this will switch+
+the kko0 reports to the old style of release 2.2. So please execute the+
+report RKKBOLDR via transaction SA38 - then you should get a message+
+KN 194 that the product drilldown uses KKROBJ records. After this the+
+issue should be fixed (maybe you need to re-import the standard reports+
+via the kko0 menue - environment - import reports again from client 000.+
+Kind regards,+
+Christian Gaertner+
+(development SAP)+
+PS: With the execution of RKKBOLDR you can switch between the old+
+product drilldown reports based on KKBOB and the new based on KKROBJ.+

ADDING RADIO BUTTONS IN REPORT NEAR MISS (EHSM-NWBC)

Hi Experts,
I am new to this EHSM Enhancements , I have a requirement to add 3 radio buttons in Report Near Miss ( EHSM-NWBC ), I am not understanding this BOPF firm Enhancement .So please provided me the required information .
Thanks & Regards.
Bhushan K.

Hi Bhushan,
If you want to add 3 radio buttons, then first of all you have to append one field in EHHSSS_INC_BASIC_INFO_ALL_D structure with Fixed Domain values.
Then you need to enhance EHHSS_INC_REC_NRM_QAF_V3_BSCI component Configuration.
In that Configuration you need to add field with display type Radio Button Group, with column count 3.
Kindly refer the following snap for the same.
Thanks and regards,
Chetan P. Patil

EHS Report Near Miss Webdynpro abap Enhancement.

HI Experts,
I need to add two fields in SAP EHS Report Near Miss Webdynpro abap application ( standard application ). Let me know how to Enhance the standard EHS Report Near Miss step by step.
Thanks & Regards.
Krishna.

Hi Bhushan,
If you want to add 3 radio buttons, then first of all you have to append one field in EHHSSS_INC_BASIC_INFO_ALL_D structure with Fixed Domain values.
Then you need to enhance EHHSS_INC_REC_NRM_QAF_V3_BSCI component Configuration.
In that Configuration you need to add field with display type Radio Button Group, with column count 3.
Kindly refer the following snap for the same.
Thanks and regards,
Chetan P. Patil

Error: Prefix number: entry missing for system REP client 113 Msg no 5W023

Hi, we're trying to study Workflow based on the manuals we downloaded online. Upon saving, we encountered the error: Error: Prefix number: entry missing for system REP client 113 Msg no 5W023.
Here's the diagnosis:
Diagnosis
Tasks, rules, and workflow definitions require an ID that is unique throughout all systems and clients. In this way, you can ensure that you can transport these objects from one system into another at any time (without restrictions). From a technical point of view, the uniqueness of the ID is ensured by what is known as a "prefix number". You can define a separate prefix number for every system and every client in table T78NR.
System Response
If a prefix number is not defined in the client in which you are currently working, it is not possible to maintain (maintenance terminates).
Procedure
Maintain table T78NR in Customizing, and create an entry for the system in question and the current client.
Hope somebody can help me understand what this is.. thanks so much and appreciate your help..
Thanks,
Angela Paula

Hi Angela,
Please check if the Prefix number is maintained in SWU3 t-code.
Go to Maintain Definition Environment -> Maintain Prefix Numbers and check if the prefix number is maintained.
Hope this helps!
Regards,
Saumya

Report Designer missing 'group level' area - GUI problem?

Hi all -
I have a few questions here that I think are related, so I'm posting in one thread.
1) As far as what I've been reading on, we can upgrade to BI 7.0 even with a front-end SapGUI 640 (patch 19). True or False?
2) One can <u>only</u> use Report Designer with SapGUI 710. True or False?
And here's a long one...
3) When you open Report Designer should we see "Group Level" on the right-hand side (if it's checked to show)? Mine (having sapgui 710 at patch 1) was showing just the ruler, but not the "Group Level" areas... is this a gui issue? What's the fix?
[my history of GUI install:
Before upgrade: Sap GUI 640 patch 8
After upgrade: Installed NW4s BEx components only
(then getting dumps in the r3 back-end) so installed SAP GUI 710 from 50083078_4 cd.
Report Designer missing the group level areas... I thought, might as well install patch 01. But that did not help.]
Any input would be great!
Thanks guys (and girls!)!
Cheers...

1) As far as what I've been reading on, we can upgrade to BI 7.0 even with a front-end SapGUI 640 (patch 19). True or False?
True
2) One can only use Report Designer with SapGUI 710. True or False?
False
3) When you open Report Designer should we see "Group Level" on the right-hand side (if it's checked to show)? Mine (having sapgui 710 at patch 1) was showing just the ruler, but not the "Group Level" areas... is this a gui issue? What's the fix?
I had a couple issues to 710 with the report designer. i didnt had anything similar to ur issue, but all my default and specifics of format catalog were blacked out and not allowing me to change that. I downgraded to 640 and everything works fine now. (I tried installing all possible latest and greatest on the GUI but nothing worked and it costed me a whole day to acknowledge the fact)

Firefox 4.01 will not open in windows 7 after installing. Reports Profile missing

I have asked this before. I installed 4.01 on windows 7. Everytime I attempt to open it the system reports a missing profile and will not open. Have we identified what is happening?

# Please run "''firefox.exe -ProfileManager''" and try creating a new profile.
# More information here: [[managing profiles]].

"Reporting" in missing in transaction st03 Bi workload

Hi
We're using BI.7 (SPS12) on MS SQL 2005 and are willing to have statistics about query runtime in transaction st03.
I've followed the instruction givent in sap note : Note 934848 - Collective note: (FAQ) BI Administration Cockpit
Statistics Process chains (0TCT) are now running every day without problem, infocubes (0TCT_Cd aggregates are filled.
But in transaction st03 underBi Workload , analysis view, only "Aggretates", "Load Data" and "Process chain" data are available, the "Reporting" is missing ... quite disturbing when you want to have a look at the query runtime.
I've rechecked many time the sap notes :
I've activated direct access for virtual providers.
I've called transaction RSDDSTAT, all the Infoproviders, workbook, etc ... have the setting On (X), All (2).
I've checked the tables RSDDSTAT*, they're filled.
I've checked the infocube 0TCT_C01 (Front-End and OLAP Statistics (Aggregated)) , the cube is filled with query statistics !!
But despite all of that st03 stays empty for reporing.
Any help would be highly appreciated.
Thank you/
Regards.

Hi,
we have similar problem like you. Please tell me how you have solved this problem.
Thanks,
Kiran Manyam

Result reporting entries missing

Similar Messages

Maybe you are looking for