Results view does not display any data

Hi
Every time I execute a query in the sql worksheet, I do not see anything in the results view. I only see the ouput in the output script folder. The output script view display is just like the usual sqlplus screen results. I want to look at the results in a table format that is suppose to be displayed in the results view.I used F5 and F9 to execute the query.
Can anyone tell me why this is so?
Example below is what I see in the output script view, when I run the query below.
select file_name,tablespace_name from dba_data_files;
FILE_NAME
D:\ORACLE\ORADATA\ORA92\SYSTEM01.DBF
D:\ORACLE\ORADATA\ORA92\UNDOTBS01.DBF
D:\ORACLE\ORADATA\ORA92\CWMLITE01.DBF
D:\ORACLE\ORADATA\ORA92\DRSYS01.DBF
D:\ORACLE\ORADATA\ORA92\EXAMPLE01.DBF
D:\ORACLE\ORADATA\ORA92\INDX01.DBF
D:\ORACLE\ORADATA\ORA92\ODM01.DBF
D:\ORACLE\ORADATA\ORA92\TOOLS01.DBF
D:\ORACLE\ORADATA\ORA92\USERS01.DBF
D:\ORACLE\ORADATA\ORA92\XDB01.DBF
D:\ORACLE\ORADATA\ORA92\TEST01.DBF
11 rows selected.
I want to be able to see the results in the results view in a table format. Why is this not happening?
Thanks.

It works for me, when I use F9. Ensure you select the statement (unless it's the only statement) then press F9, or click the triangle button.
I guess it makes sense for F5, or execute script, to not show a table as there may be many selects, and other statements, in a script and there is no specific return value from a script.
Message was edited by:
TonyW

Similar Messages

Product Revenue Bookings and Backlog Dashboard does not display any data

Product Revenue Bookings and Backlog Dashboard does not display any data even though the load completed successfully.
They are able to see just the parameters.
Not sure if the upgrade of the database from 9.2.0.6 to 10.2.0.3 is a factor.
What can I check?
Is there some table to verify that the data exists for display in the Product Revenue Bookings and Backlog Dashboard?
Screenshot is at:
https://gtcr.oracle.com/gtcr-dir/gtcr_5637/6415786.993/Product_Revenue_Bookings_Backlog_Dashboard.doc
Support suggested to create a new request set and run the initial load with load all summaries option; but there was no change in the Product Revenue Bookings and Backlog Dashboard.
Any ideas?

hi
We have faced the similar problem after the upgrade to 10G
What we did was
Ran the initial load of time dimension, Item setup request set, and the request set of all the dash board in the clear and initial load mode..
we were able to get the data once the clear and load is completed successfully
Regards
Ramesh Kumar S

ReportViewer control used with a remote report does not display any data.

Hi there,
I have this .rdl report that runs just fine on our reporting server (I can see that when I try to run the report by accessing its URL in a browser). However, when I run it in my Windows-based application, I do not see any data. My report has two input parameters
and it needs to impersonate the caller's identity because the database uses Windows Authentication.
Here is the code I use:
var reportViewer = new ReportViewer();
// Set Processing Mode
reportViewer.ProcessingMode = ProcessingMode.Remote;
// Set report server and report path
reportViewer.ServerReport.ReportServerUrl = new Uri("http://MySsrsServer/reportserver");
reportViewer.ServerReport.ReportPath = "/Reports/MyReport";
// set the credentials
reportViewer.ServerReport.ReportServerCredentials.ImpersonationUser = WindowsIdentity.GetCurrent();
// create report parameters and set them in the report
var param1 = new ReportParameter("First_Param", "Some string");
var param2 = new ReportParameter("Second_Param", "Some other string");
reportViewer.ServerReport.SetParameters(new ReportParameter[] { param1, param2 });
using (var reportForm = new ReportForm(reportViewer))
reportForm.ShowDialog();
The ReportForm is just a regular Form that has a member of type ReportViewer. In the class' constructor, I assign the member:
public ReportForm(ReportViewer reportViewer)
InitializeComponent();
try
this.reportViewer = reportViewer;
reportViewer.SetDisplayMode(DisplayMode.PrintLayout);
reportViewer.Dock = DockStyle.Fill;
reportViewer.ZoomMode = ZoomMode.Percent;
reportViewer.ZoomPercent = 100;
reportViewer.RefreshReport();
catch (Exception exception)
MessageBox.Show(exception.Message);
Using database level tracing, we were able to confirm that the two Stored Procedures used by the report are called and they return correct and valid records. However, in the form nothing shows up:
Any suggestions?
TIA,
Ed

Good to know CR doesn't like joins of Stored Procedures to something else.
But in my testcase, I finally dropped the link between the ttx file and the stored procedure. Doing so, I was able to run the report from the designer with the stored procedure as datasource instead of the ttx file. At that moment, I still had missing data in my report, while the resultset of the stored procedure returns me all the correct data !
In the mean time, I changed the layout a bit, especially the text fields containing name, address, country and postal code and city of the customer, by just adding some spaces between those seperate databasefields. In fact, there is one text box with all those database fields concatenated one to the other.
And by just adding some spaces in between, my report works fine again ?!
Strange, strange, strange,....

Corresponding table in the source system does not contain any data -URGENT

Hi Guru's,
I have already uploaded master data.
I have created infosource added infoObjects to it and activated it to create communication strucure.
M using RSA1OLD transaction.
and assigned datasource to infosource ie source system name and clicked ok.
save datasource to infosurce assigned msg displayed, clicked ok.
transfer rules r created, i have also created update rules and assigned infosource to it.
then created infopackage n added execel file name .csv
in datatargets tab selected data target as infocube. n then in schedule tab start data load immediately and clicked ok.
everything is fine upto schedule n in monitor it does not display any data.
what will be the problem??

i have also created update rules and assigned infosource to it.
then created infopackage n added execel file name .csv ??
Are you loading the data from flat file or R3? If you are loading it from R3, why are you giving the Flat file name?
In this case, check in RSA3 (R3 side), whther the datas source is getting the value.
In case you are loading a flat file, you need to create a flat file data source and assign to the infosource.
Thanks..
Shambhu

This Formula(Function) compiles but does not display any result

Please can anybody help me resolve this issue.The code below is a code for a formula(function) column in oracle report, i have complied this code and it successfully complied but it does not display any result for the column having a stock balance in the entire report.
function CF_STOCK_BALFormula return Number is
     v_all_positive NUMBER;
     v_all_negative NUMBER;
begin
     IF :transaction_type IN ('RECEIPT', 'RETURN') THEN
          IF :cp_stock_bal IS NULL OR :cp_stock_bal = 0 THEN
               :cp_stock_bal := :opening_balance + :cp_stock_bal + :quantity;
          ELSE
               :cp_stock_bal := :cp_stock_bal + :quantity;
          END IF;
     ELSIF :transaction_type IN ('ISSUE') THEN
          IF :cp_stock_bal IS NULL OR :cp_stock_bal = 0 THEN
               :cp_stock_bal := :opening_balance + :cp_stock_bal - :quantity;
          ELSE
               :cp_stock_bal := :cp_stock_bal - :quantity;
          END IF;
     END IF;
RETURN (:cp_stock_bal);
end;
Edited by: Gbenga on Jan 17, 2012 11:30 PM

Please can anybody help me resolve this issue.The code below is a code for a formula(function) column in oracle report, i have complied this code and it successfully complied but it does not display any result for the column having a stock balance in the entire report.
function CF_STOCK_BALFormula return Number is
     v_all_positive NUMBER;
     v_all_negative NUMBER;
begin
     IF :transaction_type IN ('RECEIPT', 'RETURN') THEN
          IF :cp_stock_bal IS NULL OR :cp_stock_bal = 0 THEN
               :cp_stock_bal := :opening_balance + :cp_stock_bal + :quantity;
          ELSE
               :cp_stock_bal := :cp_stock_bal + :quantity;
          END IF;
     ELSIF :transaction_type IN ('ISSUE') THEN
          IF :cp_stock_bal IS NULL OR :cp_stock_bal = 0 THEN
               :cp_stock_bal := :opening_balance + :cp_stock_bal - :quantity;
          ELSE
               :cp_stock_bal := :cp_stock_bal - :quantity;
          END IF;
     END IF;
RETURN (:cp_stock_bal);
end;
Edited by: Gbenga on Jan 17, 2012 11:30 PM

DataGrid does not display XML data

Hello, and thanks for reading this...
I am having a problem displaying XMLList data in a DataGrid.
The data is coming from a Tree control, which is receiving it
from a database using HTTPService.
The data is a list of "Job Orders" from a MySQL database,
being formatted as XML by a PHP page.
If it would be helpful to see the actual XML, a sample is
here:
http://www.anaheimwib.com/_login/get_all_orders_test2.php
All is going well until I get to the DataGrid, which doesn't
display the data, although I know it is there as I can see it in
debug mode. I've checked the dataField property of the appropriate
DataGrid column, and it appears correct.
Following is a summary of the relevant code.
...An HTTPService named "get_all_job_orders" retrieves
records from a MySQL database via PHP...
...Results are formatted as E4X:
HTTPService resultFormat="e4x"
...An XMLListCollection's source property is set to the
returned E4X XML results:
...The "order" node is what is being used as the top-level of
the XML data.
<mx:XMLListCollection id="jobOrdersReviewXMLList"
source="{get_all_job_orders.lastResult.order}"/>
...The "jobOrdersReviewXMLList" collection is assigned to be
the dataProvider property of a Tree list, using the @name syntax to
display the nodes correctly, and a change event function is defined
to add the records to a DataGrid on a separate Component for
viewing the XML records:
<mx:Tree dataProvider="{jobOrdersReviewXMLList}"
labelField="@name"
change="jobPosForm.addTreePositionsToDG(event)"/>
...Here is the relevant "jobPosForm" code (the Job Positions
Form, a separate Component based on a Form) :
...A variable is declared:
[Bindable]
public var positionsArray:XMLList;
...The variable is initialized on CreationComplete event of
the Form:
positionsArray = new XMLList;
...The Tree's change event function is defined within the
"jobPosForm" Component.
...Clicking on a Tree node fires the Change event.
...This passes an event object to the function.
...This event object contains the XML from the selected Tree
node.
...The Tree node's XML data is passed into the positionsArray
XMLList.
...This array is the dataProvider for the DataGrid, as you
will see in the following block.
public function addTreePositionsToDG(event:Event):void{
this.positionsArray = selectedNode.positions.position;
...A datagrid has its dataProvider is bound to
positionsArray.
...(I will only show one column defined here for brevity.)
...This column has its dataField property set to "POS_TITLE",
a field in the returned XML record:
<mx:DataGrid width="100%" variableRowHeight="true"
height="75%" id="dgPositions"
dataProvider="{positionsArray}" editable="false">
<mx:columns>
<mx:DataGridColumn width="25" headerText="Position Title"
dataField="POS_TITLE"/>
</mx:columns>
</mx:DataGrid>
In debug mode, I can examine the datagrid's dataProvider
property, and see that the correct XML data from the Tree control
is present. However, The datagrid does not display the data in any
of its 6 columns.
Does anyone have any advice?
Thanks for your time.

Hello again,
I came up with a method of populating the DataGrid from the
selected Item of a Tree Control which displays complex XML data and
XML attributes. After the user clicks on a Tree branch, I call this
function:
public function addTreePositionsToDG(event:Event):void{
//Retrieve all "position" nodes from tree.
//Loop thru each Position.
//Add Position data to the positionsArray Array Collection.
//The DataGrid dataprovider is bound to this array, and will
be updated.
positionsArray = new ArrayCollection();
var selectedNode:Object=event.target.selectedItem;//Contains
entire branch.
for each (var position:XML in
selectedNode.positions.position){
var posArray:Array = new Array();
posArray.PK_POSITIONID = position.@PK_POSITIONID;
posArray.FK_ORDERID = position.@FK_ORDERID;
posArray.POS_TITLE = position.@POS_TITLE;
posArray.NUM_YOUTH = position.@NUM_YOUTH;
posArray.AGE_1617 = position.@AGE_1617;
posArray.AGE_1821 = position.@AGE_1821;
posArray.HOURS_WK = position.@HOURS_WK;
posArray.WAGE_RANGE_FROM = position.@WAGE_RANGE_FROM;
posArray.WAGE_RANGE_TO = position.@WAGE_RANGE_TO;
posArray.JOB_DESCR = position.@JOB_DESCR;
posArray.DES_SKILLS = position.@DES_SKILLS;
positionsArray.addItem(posArray);
So, I just had to manually go through the selected Tree node,
copy each XML attribute into a simple Array, then ADD this Array to
an ArrayCollection being used as the DataProvider for the DataGrid.
It's not elegant, but it works and I don't have to use a Label
Function, which was getting way too complicated. I still think that
Flex should have an easier way of doing this. There probably is an
easier way, but the Flex documentation doesn't provide an easy path
to it.
I want to thank you, Tracy, for the all the help. I checked
out the examples you have at www.cflex.net and they are very
helpful. I bookmarked the site and will be using it as a resource
from now on.

Search Item drop-down does not show any data for Advanced Search.

Hi,
I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
I am using OAF version 12.1.1.
Thanks, Suresh

Hi,
I faced the same situation but i still waiting for the solution.. this is my problem's thread..
Addition of LOV Search Filter using Personalization
But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
Thanks
Renu

Aperture 3 project does not display any images in one Project

This is a strange situation. The bullets below outline the situation:
The project does not display any images
When I place the pointer over the project it shows there are 500+ images
I have located the RAW images stored in my aperture library
I can pull up the images using a smart folder and searching for photos taken on the event day
This is happening only to one of my projects that I know of (weird!!)
I have tried to 're-add' the image by both importing and dragging and dropping into the project, neither works
I tried the following basics:
Fixed permissions
Rebuilt the database
Tried to re-import the data, but when I have the 'don't import duplicates' these are not an option
Found the images in my Aperture library
I created another project and drug all of the images into that project
Any idea how I can fix this?
My fear is that if I delete the original project, the original master images will be deleted.

The most common cause of this is some sort of stuff in the search box at the top of the browser that you don't expect to be there. Just clear it and all your images should show up.
RB
One note - if you drug your images from one project to another it moves them vs copies them unless you hold down the option key.

BI Publisher Word Template The report does not contain any data fields.

I have OBIEE BI Publisher report (10.3.4) working fine using BIP but using MS Word 2003 I want to create new template and want to add charts etc.
Step 1. In MS Word I successfully login Oracle BI Publisher as Administrator
2. Oracle BI Publisher -> Open (I open the report)
3. Go to Insert -> Table Wizard
I get this error:
The report does not contain any data fields. Please make sure that the reports generates data with the default settings or provide a valid XML file.
Please help

Hi
How do I load XML data? Also why XML data load is required? Do I have to export XML data from BIP View screen and load from the same file from the word?
Please clarify
Thanks

TS3297 ITunes for IOS does not display any content in the iTunes store

iTunes for IOS does not display any content in any section (other than Genius tab).
NB: I am signed in with my Apple ID & have an Internet connection.
On selecting say the "Music" tab the display briefly say's "Loading ...", but nothing displays, just a white screen.
I have tried signing out of iTunes & re-setting the iPad, but this does not fix the problem.
(The App Store is working fine!)

Status is :540672
<REQUESTRESULT>
<RESULT>
<UID></UID>
<STATUS>CAPI_STAT_DATA_ICAL</STATUS>
</RESULT>
<FAILURE>
<UID></UID>
<STATUS>CAPI_STAT_DATA_ICAL</STATUS>
</FAILURE>
<PARSE ERROR>
<MESSAGE>VALUE?TE</MESSAGE>
<STATUS>CAPI_STAT_DATA_ICAL_PARAMVALUE</STATUS>
<VTEXT>VALUE?TE:20060830
END:VEVENT
END:VCALENDAR
</VTEXT>
</PARSE ERROR>
<PARSE ERROR>
<MESSAGE>VALUE?TE</MESSAGE>
<STATUS>CAPI_STAT_DATA_ICAL_PARAMNAME</STATUS>
<VTEXT>(null)</VTEXT>
</PARSE ERROR>
<PARSE ERROR>
<MESSAGE>VALUE?TE</MESSAGE>
<STATUS>CAPI_STAT_DATA_ICAL_PARAMNAME</STATUS>
<VTEXT>(null)</VTEXT>
</PARSE ERROR>
</REQUESTRESULT>

File Screening Audit Report does not contain any data : report statistics is empty

Hi ,
I have enabled File screen audit and Record file screening activity in auditing database options in file server 2008.
I am getting details of file screen audit in Event log , But incident report file screen audit report does not contain any value.
Getting report for each incident of file screen audit , But it does not contain any data in report statistics.
Data available in scheduled report of file screen audit.. not available in incident report only..
Please assist...
Thanks,
Vasanth.M
Thanks, Vasanth.M.

Please note that, If the Record file screening activity in the auditing database check box is cleared, the File Screening Audit Reports will not contain any information. To configure file screen audit, I would refer you on this informative
technet library :
https://technet.microsoft.com/en-us/library/cc754540.aspx
Carlo

IOS 7 Calendar Day View does not show any all-day events ?

Hi,
I realize that iOS 7 Calendar Day View does not show any all-day events.
Is this a bug ?
Any help given is much appreciated.
Thanks and Regards.

Mine brings me right up to the current time, or in the case of another day, it takes me to the first appointment of the day.

Managed System Configuration ! The table does not contain any data !

Hi,
In Sol Man Setup , Managed System Configuration, in phase 6 - Create Logical Componets -
There is no Product Version and Product Instance Available.
The message is : " The table does not contain any data "
How can correct this problem ?
Thanks

Hi,
while creating new Logical Component via SMSY , you need to specify Product first.
e.g. if you managed system is ERP 6.0 , select Product as SAP ERP
once you select Product , it automatically fetches information for product Version and Main Instance depending upon Product field input.
Please check and let us know if issue still persits.
Thanks,
Rupali

My Creative Cloud desktop app does not display any means of signing in to my account. What would be the reason?

Creative Cloud desktop app does not display any means of signing in to my account. What would be the reason

BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html
or
Chat Now button near the bottom for Activation and Deactivation problems may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

S_ALR_87013611 is not displaying any data for GL

Hi,
THe report S_ALR_87013611 is not displaying any data for GL. How to go about this
Regards
SM

Hi,
S_alr_87013611 is a report where we can see the planned and actual costs in cost elements in cost center wise for a specific controlling are for a given period.
Please check if your GL accounts are assigned with the cost elements in FS00.
If not create them.
You can assing all cost elements to many GL at a time using
OKb2_ Give the range and the cost element for each range eg, expenses range - cost element 1, incomeange _Cost element as 11 etc.
OKb3 _Create the batch input session
SM30_ Run the batch input session created
Also please check if you have given the cost center group costt senter range while you entered the ranges in the selection screen in this report.
Similarly please check the cost elements and cost elements group also.
Thanks,
Shilpa.

Results view does not display any data

Similar Messages

Maybe you are looking for