ResultSet changes lost after changing cursor position

Hi -
The rowUpdated method seems to always return false
even after applying valid updates to a resultset object.
The database row can be updated with the changes immediately
but if i don't update before moving to a different row in the cursor
the changes to that row in the resultset are lost when i attempt to
retrieve them at a later time
Any ideas?

Hi,
The rowUpdated method only returns true if the line was updated and the driver supports this feature. To find out if it does, call DatabaseMetaData.updatesAreDetected(int type). If it doesn't then that is your answer.
If you don't update a row before moving to another one it's somewhat obvious that the driver won't keep track of your changes (imagine what would happen if you do this for ecery row in a huge result set). The idea is to update the database. Otherwise they are lost. So just update the row if you want to, or do not make any changes to the columns if you don't.
Alin.

Similar Messages

Font Arial CE is lost after changing to FM9.0

After updating FramMaker form 7.0 to 9.0 I had to change a polish manual, but the message "Can't find the font Arial CE" (in principal) occurs. In all other programs I can find and use Arial CE. Can pls. somebody tell me how to solve this problem?

Grete68 wrote:
After updating FramMaker form 7.0 to 9.0 I had to change a polish manual, but the message "Can't find the font Arial CE" (in principal) occurs. In all other programs I can find and use Arial CE. Can pls. somebody tell me how to solve this problem?
Yes, FM 9 uses unicode, as Michael wrote. But this alone does not explain why FrameMaker 9 completely ignores any registry-based font mappings. I'm not sure if I can call this a "bug", but it's definitely a flaw.
The only way to get around this problem: Open these documents in FrameMaker 8, change your paragraph formats globally from "Arial CE" (which most likely is a virtual font, mapped to Arial) to "Arial", save, and re-open in FM9. FrameMaker 8 also uses unicode, but still understands the "old" registry mappings to virtual fonts, and is able to re-encode text accordingly. FM9 hast lost this ability. I don't know of any way solving this without FM8.
Bernd

Changes lost after saving InDesign CS3 (WIN)

Part of our work is to make amendments to books we've typeset in InDesign. As is normal practice, we save and check our work as we go along, and subsequently close the indd file. On a few occasions now, when we have re-opened a file, we have found some of the changes we've made have not been kept. These seem to happen at random through a book, and it has happened rarely enough to prevent us getting to the bottom of it (are we doing something wrong in haste, etc?). For instance, we thought it could be our inadvertently causing Undo to do more than one edit, but our investigations on the latest occurrence of this have convincingly ruled this out. The working files are stored on the computer's hard drive (before being backed up to our server), so it's not a qestion of problems saving directly to a server, either. (So far we haven't experienced this problem on our Mac.)
We are now wondering if InDesign's ability to keep track of every save (version) of a document, which I understand is accessible through Version Cue (which we don't have installed) is at the heart of the problem. Could InDesign be retrieving earlier save-versions of a file each time we save?
Anybody any idea what could be going on? More to the point: how can we prevent this happening without our having to check again (and possibly repeatedly) through what can sometimes be more than a hundred author's amendments?
Ideas would be gratefully received.
Rob Fris
documen

In a message dated 29/03/2010 23:25:17 GMT Daylight Time, [email protected]
writes:
http://forums.adobe.com/message/2698024#2698024
Many thanks for this. As a result we have adjusted our way of working in
InDesign to use Save As and overwrite rather than use Save.
Rob

Sql Developer Data Modeler all domains lost after changing to version 3.0

I have two questions:
1. Sql Developer Data Modeler - is it still a separate product? Or is it only available as integrated within Sql Developer?
2. After opening a model created with Data Modeler 2.0 with the new integrated Data Modeler 3.0 I lost all my domain definitions. What can I do to avoid this? Any help would be appreciated.
Thanks in advance
Holger

Hi Holger,
Sql Developer Data Modeler - is it still a separate product? Or is it only available as integrated within Sql Developer?Standalone version is here http://www.oracle.com/technetwork/developer-tools/datamodeler/overview/index.html
2. After opening a model created with Data Modeler 2.0 with the new integrated Data Modeler 3.0 I lost all my domain definitions. What can I do to avoid this? Any help would be appreciated.Copy file defaultdomains.xml from DM 2.0 installation to "sqldeveloper\sqldeveloper\extensions\oracle.datamodeler\types" directory (if you use version in SQL Developer) or to
"datamodeler\datamodeler\types" if you use standalone DM 3.0.
Location of this directory can be set in preferences - it's called system types directory there - it contains: default domains, RDBMS sites, logical types and custom scripts.
Philip

Tracks lost after change of directory path

Files stored on my hard drive (C) were filling up to much space so i tried transfering all my future iTunes downloads into a secondary (internal) hard drive (D). Unfortunately this seemed to reset my iTunes to a previous date, deleting songs that i had downloaded over the last few months. I therefore have songs back that I had deleted to allow room for other tracks, and no longer have any of the more recent songs. I tried setting the storage path back on to the original drive which appears to have failed to do anything. I am unsure of how to get my iTunes back to how it was before this set back. Would appreciate all help and any information into solving this matter.

the only way i've figured out for this was to deselect organize itune folder. I use to be able to change folder locations and itunes would easily find where i moved them to. Itunes 10 doesn't seem to do that. When i have the organize box checked, itunes has a mind of it's own--that doesn't even make sense. It puts authors for audiobooks in itunes media folder instead of audiobooks folder--when the kind is marked as audiobooks.

How can I restore my previous accounts? which I lost after changing the OS of my PC

Recently i have changed my OS and I have taken backup of the thunderbird's folder. Now I have successfully installed thunderbird in my new OS but I am able restore my all the accounts. Tell me how can I utilize my backup data of previous thunderbird accounts. Please reply as soon as possible its really urgent.

[https://support.mozilla.org/en-US/questions/992740#answer-551197 This post] explains how to import the Inbox mail folders from another profile folder with POP accounts. The method is the same for the Sent folder and folders contained in Local Folders.
To restore address books, look for the .mab files in the old profile:
http://kb.mozillazine.org/Moving_address_books_between_profiles

Change client after changing system status

first we registered our system as develop. after that we have to change its status to productive. on service.sap.com we changed the system status to productive. in transaction USMM we changed the system type to production. as far as i concern also we had to change the mandat status to productive.how can we do it? can you help me with the documentation or to write how to do it.
thanks in advance

Hi Andrey,
You can change the client status to "Production" in SCC4. Is this what you mean?
Gary

How to compare the value of a cell before changing and after changing.

Hey there,
Now I want to implement a JTable. And the requirement is that users can edit a cell in the Table only once. I think there are two possible ways. One is that after user edited a cell, I will set this cell read only. Another way is to compare the vaule before and after the changing. If it is different, then write back the previous value.
But I did not know how to implement in Java. Can anybody help me?
Thanks alot!
Shelly

inevitably, you will have to save a before copy of
the data, what this many times amounts to is that you
will need to have 2 identical data structures before
you start or some type of locking mechanism for each
piece of data.Why is this inevitable? I don't see it as inevitable at all. In fact, it's quite simple to implement a TableModel that returns false when isEditable(int, int) is invoked for any cell that has already had setValueAt(Object, int, int) inovked on it, for example. Depending on the requirements and implementation a different methodology may be needed for determining when the edit has taken place, such as a custom editor that notifies the TableModel when stopCellEditing() is invoked. Heck, overriding editingStopped() in JTable to do it might even work.
So, create a TableModel that returns isEditabe(int, int) as true only if the cell hasn't been edited yet. The only problem to solve from there is how you know when it's been edited. I've already given you a few leads on that, it's not particularly hard but depending on your exact implementation it may require different solutions.

Transformationsde-activating after changing write optimized to standard dso

Hi experts,
i changed write optimized dso to standard dso because of some changes, but after changes done i activated the changed transformations standard dso(previously write optimized), but it is not activating , after gone through the issue its happened
because of 0 record mode, i deleted the 0 recordmode rule and activated.
Now the real issue:-
when i transport this changed dso and transformations from dev to acceptance test am facing this issue below are the details.
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
Transformation 0MX1MHVGBT0A0PTA526YRW3O48Q77GOC deleted in version M of DDIC
Transformation 0RKZY5AKAWMJ2ZRKJMSZO791UP6X1F2N deleted in version M of DDIC
Activation of Objects with Type Transformation
Checking Objects with Type Transformation
Checking Transformation 0MX1MHVGBT0A0PTA526YRW3O48Q77GOC
Rule 10 (target: 0RECORDMODE group: 02 Technical Group ): Constant is initial
Checking Transformation 0RKZY5AKAWMJ2ZRKJMSZO791UP6X1F2N
Rule 10 (target: 0RECORDMODE group: 02 Technical Group ): Constant is initial
Saving Objects with Type Transformation
Internal Activation (Transformation )
Preprocessing / Creation of DDIC Objects for Transformation 0MX1MHVGBT0A0PTA526YRW3O48Q77GOC
Preprocessing / Creation of DDIC Objects for Transformation 0RKZY5AKAWMJ2ZRKJMSZO791UP6X1F2N
Please help me in this by rectificying in dev system how could i manage to send this transport to acceptance test.
One more thing even after deletin the 0recordmode in transformation , i can able to see that in techinical group.
cheers
vas
Post Processing/Checking the Activation for Transformation 0MX1MHVGBT0A0PTA526YRW3O48Q77GOC
Transformation 0MX1MHVGBT0A0PTA526YRW3O48Q77GOC was activated

Hi
You can change write optimised to satndard DSO.
You are supposed to add 0recordmode field in datsource check below links for clear information:
error while activating transformations
Re: Transformation error.
Ravi

How to assign values to textbox automatically when cursor position changed

I want to get values based on the values entered in the one textbox when we change the cursor position the value to be automatically loaded in to other text box is it possible please help me .....

You still haven't explained what a text box is.
Repeating what you've already said in "BOLD" text doesn't make the question any clearer.
What does the changing cursor position have to do with anything. I can use the arrow keys to move the cursor without changing the text.

I change my apple ID and password like a week now and after changing all my information and MY apple ID, i noticed that i lost all my picture in my camer roll and my photo stream too ;(.. Can anyone please help me how to bring it back all my photos?

I change my apple ID and password like a week now and after changing all my information and MY apple ID, i noticed that i lost all my picture in my camer roll and my photo stream too ;(.. Can anyone please help me how to bring it back all my photos?

I don't know about your camera roll, but for photostream just do this:
Go into Settings > iCloud > Delete Account and then sign back in using your Apple ID information.
Make sure to do the same thing with your iTunes and App Store options.
Settings > iTunes and App Store > Click Email and sign out, then sign back in.

Changing the cursor position

Is it possible to change the cursor position automatically when changing the language?
For example: when changing from English to Hebrew the cursor will move from the right end to the left?
Thanks,
Amnon

I don't think this is possible in general, although some individual apps might do it. Normally you use a direction control from an app menu or at the system level.
http://support.apple.com/kb/PH14203

Why is the position of key frame BEFORE scene changes not after?

Why is the position of I frame BEFORE scene changes not after?
And, why doesn't MovieVideoChart show any I frames other than those that correspond to periodic "key frames every X frames"? Is it reading meta data and not really showing where the real existing I frames are located? I.e. WYSIAL (what you see is a lie)? If so, where can I get an affordable tool that will let me examine my files in this regard?
I have put compression and chapter marks at scene changes in FCP and have exported with markers for DVDSP (both chapter and compression).
I have read on this forum (somewhere) that when insert key frames every X frames is selected, Compressor is still going to insert key frames automatically at key frames.
When I last encoded with H.264 in Compressor, I selected option to insert I key frame every 90 frames (fps=29.97).
When I jump to chapter in my encoded video, where I had place a key frame at a cut, I end up with a chapter at the frame BEFORE the cut.
I will try moving my chapter/compression marks a frame ahead and see if that helps.
Certainly, others must have been plagued by this problem.
When encoding with MPEG2 for DVD, the same thing happens.
It is a real problem. I get one frame appearing before the cut in chapter skips.
Hope someone can illuminate this problem.

Hi there
As you have seen, RoboHelp doesn't understand how to create the layers you are wanting to achieve the effect in Word. It simply brings the images in as separate objects.
Basically there are two approaches you might consider.
You could insert Positioned Text Boxes and configure them to present the images as you want. If you take this approach, you will likely find yourself struggling to maintain the positioning consistently as well as noticing text flow issues. Personally, I'd avoid that approach.
The other approach involves displaying the images in your Word document so that you see them as intended, then screen capture so you grab the combined image. Then save that combined image and use it instead of the separate images in RoboHelp. This is the approach I'd suggest and that I use myself.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Lost all files and applications installed after changing user profile in the registry of windows 8.1 pc

The original user profile on my windows 8.1 pc is C:\Apple\acer sm. I tried changing it to C:\Apple\Apple. After I rebooted my PC, I found out that all my files and applications are lost. What shall I do to recover them?
Your help would save my life. Thank you!

Hi AppleMist,
We wonder if you changed the registry entry or path of user profile.
If you did that in registry please try changing it back.
After changing your user profile and reboot, system won’t read the profile you changed but a new user profile (C:\Apple\acer sm or TEMP) should be created by system. Try renaming this new one as acer sm.old and changing the apple back to acer sm.
It should works fine if you didn’t change file in profile, if it doesn’t work perform a system restore.
Regards
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Change cursor position?

I have just completed creating 3 forms with 60+ text fields each with Acrobat X. To my dismay, I've discovered that when one types in the text field, the text appears in the middle (left justified) of the text box instead of at the top.
How can I fix this/set the cursor position?
Thanks!

You need to change the text field(s) to multi-line text fields. This is found within the text field properties dialog in the options tab.
Andrew

ResultSet changes lost after changing cursor position

Similar Messages

Maybe you are looking for