Retaining active web links when distilling a PDF from PageMaker.

OS Windows 7
I have been using my Acrobat 4 since, well, forever, and as I only needed to produce PDFs for customer proofs and printing Masters. However, it was never any good at retaining active web links that were created in the original PageMaker publication.
Now however, I need to get involved in creating survey forms, so I decided to check out Acrobat 11 with a view to upgrading.
But I've had no time for forms as even with Acrobat 11 I am still unable to create active hyperlinks that remain active after distilling into a PDF. I am pretty sure I am doing it right in PageMaker by establishing a source & destination for the particular image or text I wish to use as the clickable link, so what am I missing?
And is Acrobat 11 a good tool for creating attractive and utile customer feedback surveys that I plan on making available on my site?
TIA
Frank

I just made test PDFs from Pages 2 & 3 on Snow Leopard & Pages 4 on Leopard 10.5.8 (I don't have earlier versions of iWork installed on my G5 iMac with Leopard) & the links all remained active & opened the designated page in Safari each time. The only suggestion I have is to make sure you have the link set as a hyperlink before exporting as a PDF.

Similar Messages

Preserving links when exporting to PDFs from Pages 5.1

Several people have noted that links do not survive after the first page of a PDF document when exporting from a Pages 5.x document to PDF. *IF* the links are dislayed as html code, they will survive: e.g.
html://www.apple.com
will work on all pages of the PDF document (anyway, it works on page 2!)
But if you edit the link and CHANGE THE DISPLAY NAME, the links will no longer work on page 2 and subsequent pages. E.g., this link will NOT work even though it resolves to the same address (i.e., html://www.apple.com).
apple.com
This is insane, of course. Any work arounds?

Right, I know it will work if you don;t edit the display name. But one often will want to do that. If you were writing a column, say, you might say "In Dick Francis's novel Refusal, the author soes thus and such." That link is clickable. It would work natively in Pages 5, as in Pages 4.3, in a TextEdit document natively or exported to PDF, and in Apple mail, etc. It also works when you export from Pages 4.3 to PDF. In Pages 5, however, it only works (after the first page: who knows why it works on the first page!) if the display name is the same as the html code. This is a bug, or sloppy programming, or both.
I like Page 4.3 quite a lot. I has its limitations but it is simple without being simplistic. I had high hopes for Pages 5. Now that we have 5.1, though, I see that it is just not going to work for me or for my businesses. There are little things like the inability to set the default zoom (which is acutally quite annoying if your eyes are not so hot), the inabilty to see|print comments and big things like the lack of Applescript support, bookmarks, and mail merge. I thought Apple was going to be bringing back these features, but I see now that they are committed to the lowest common denominator. The people who say Apple is is the business of making "toys" are, alas, correct. I guess the business market is not big enough for them. I've actually removed pages 5.1 from all our our macs, and have removed 2.1 from our ios devices. We still have a few stray documents that were created or edited with Pages 5, but I've discovered that you can use Pages for icloud to download a pages file in Word format. Pages 4.3 can open and edit Word files, so that is a (cumbersome) workaround. We'll continue to use 4.3 (and 1.7.2 on the ipad) for the time being, but obviously will need to find something that has current support going forward.

Saving as a PDF with Active Web Links

I need to save Word documents that have active web links in them to PDF files. When I save them to PDF, the links are no longer active. How can I save them with the web links in tact?

You need Adobe Acrobat to do this (the Professional version, not the free Acrobat Reader or the OS X Print to pdf function. The software is rather expensive, though. There are less expensive versions (Acrobat Elements) but these only run under Windows.
You can also use Adobe's online pdf creation service, which may be a better (i.e. cheaper) option.
Hope this solves your problem...

Help! How to e-mail a PDF (from Pages) with active web links!

I have been working on this for hours without any success! I would be so grateful for a brainy Apple wiz to help me out. I am creating a Pages document that has active web links in it. My goal is to e-mail my document with the active web links in it.
So - If I export my Pages doc as a PDF to my desktop, the links work great! However - the moment I put that PDF into an email and send it the links become inactive. Is there any way to create a Pages document with web links > Export it as a PDF > Then mail with active (clickable) links? I have tried many times without success.
If the answer to my question is no, does anyone have a tip for where I can create a PDF and mail it with active links? Will any of the Adobe programs work for this type of thing?
Thanks so much!!
Kristen

Using Pages '09 v4.2.
I just tested this. Assumption: You have the “Windows friendly attachments” checked in the attachments panel.
Your Pages document is open. The web links are active. You want to get it into Mail.
From the Pages menu bar, choose Share > Send Via Mail > PDF.
Mail will open with a compose window. Your PDF will be attached as a full view document. You see the links present in the PDF.
Now, click near the web links. This shows your PDF in blue. Now right-button click, and choose View as Icon from the pop-up panel.
Now mail it to yourself on another account that Mail can open.
You will see the web links in the PDF.
Right-button click on a link and from the pop-up menu, choose Open with Safari.
If you chose Quick Look, it would pop open the PDF and offer to open it further in your default PDF viewer. In my case, it is Adobe Reader.
If Reader opens this PDF from the Mail attachment, the web links remain active.
Does this solve your issue?

Where are files downloaded to on the mac when creating a pdf from web pages?

where on the mac HD are files downloaded to when creating a pdf from web pages?
Im creating web pages from the whole site so creating a large document, so wondered where these fiels are stored on the mac so I can delete when finished as dont want to clog up the hard drive.

Look at the LiveCycle server products.

Acrobat crashes when creating a PDF from a web page

Whenever I ask Acrobat to create a PDF from a web page, it crashes halfway through the process. Here is an example from the BBC:-
http://www.bbc.co.uk/news/science-environment-19585341
Printing to PDF from the browser does not produce an accurate document. The font is too big, and most of the pictures do not appear.
I use Acrobat X Pro version 10.1.4.
This is a PC problem. On the Mac it works.

The problem I mentioned is peculiar to Acrobat 10 and also to my PC. On a Mac I can create PDF's from webpages normally.
I also notice that when printing to PDF from Opera only the first page comes out. (Using Firefox all pages are printed to PDF.)

How to include non web pages to the "Create PDF from Web Page" feature?

In Acrobat Pro (v. 10), when I use the "Create PDF from Web Page" feature, it works great for html pages, but it skips non-html links (doc, pdf, ppt, xls, etc). I need Acrobat Pro to convert those files and put them in the order as well. I don't see an option for this in settings. Is there ANY way I can do this? This is for an archiving purpose and I have 10,000 plus files to convert. Please help.

This is a question i'm trying to answer too. My issue is that I have a PDF file which itself contains links to both DOC and PDF files. The end result is that I need one consolidated PDF containing all the linked files (in order).
I can run the "create from web page" on this PDF file, and it'll download them, but not convert them. It just adds them as "jumbled" text to the end of the document. I need it to download, convert, and then append them.
So, as isunshine3 asked above, any way to have Adobe convert the files that it finds linked when running the "create from web page"?
THanks
Matt

When saving a PDF from a FrameMaker book, is it possible to set document filenames as bookmarks in the PDF?

When saving a PDF from a FrameMaker book, is it possible to set document filenames as bookmarks in the PDF? Currently when I have a Framemaker book that I want to save as a PDF, I choose Save Book As and then choose PDF for the file format. A dialog box comes up in which I can choose the Bookmarks tab and choose which tagged content I want to be made into bookmarks in the PDF file. What if I would rather have the filename of a document rather than the chapter title be a bookmark in the PDF? Is that possible? Where would I choose that option? Thanks!

There are two ways that you could do this. You can either use postscript text frames and enter the correct pdfmark entries to show the file name with the corresponding actions (i.e. where to go in the PDF) or you can use hidden text in FM and the "Filename (Short) " variable in a unique paratag to be picked up by FM's bookmark creation.
To go the pdfmark route, see http://www.pdflib.com/fileadmin/pdflib/pdf/pdfmark_primer.pdf for details and also consult the Adobe Pdfmark Reference manual (http://www.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/pdfmark_reference.pdf).
The hidden text route would use FM's Color Views to specify a colour as Invisible. This will make the content visually disappear from the screen (and any output), but FM will still be able to read the contents of any text that is coloured with the Invisible colour(s).
1. Pick or create a colour that you want to be invisible. [Magenta is usually a good bet and stands out visually].
2. Set that colour to be invisible in View 1 and visible in View 6. [you can use the shortcut <esc> v 1 and <esc> v 6 to toggle between the views.]
3. Create a paratag to use for the filename and set the font colour to use the invisible colour.
3. In the title of each chapter file, drop an anchored frame that is set to be outside of the text frame [so it won't interfere with any other content].
4. In that AFrame, insert a text frame and use the invisible paratag defined in step 3.
5. Insert the Filename (Short) variable in that text frame.
6. Repeat steps for all files to be included in the bookmarks.
When creating the PDF bookmarks, select only the paratag used for the invisible colour.
Don't forget to toggle the View to be invisible (i.e. <esc> v 1 - this also works at the book level for all files in the book).

Adobe Acrobat XI Standard crashes when we create pdf from scanner

We are using adobe acrobat XI standard, version 11.0.06
WIndows 7 Pro 64 bit
scanner: Xerox documate 4799
Acrobat crashes when we create pdf from scanner

Spent quite a while on this one.. My problem was related to twain drivers which reside in c:\windows\twain_32. I'm running windows 7 64-bit. First it's usually possible to scan in windows 7 maybe vista and from adobe without even using twain (using WIA). So try renaming the twain_32 folder to _twain_32 and see what happens... If that stops the crashing look at the contents of the twain folder. I had a Dell folder for some printer I wasn't even using. That was causing the crash. I removed the dell folder and renamed the twain folder back to twain_32. Now everything works as designed.

When creating a PDF from a PPT or Keynote application on a Mac using Acrobat X Pro, how do I ensure it can be opened on a PC? Do I need to save as a particular version of Acrobat?

When creating a PDF from a PPT or Keynote application on a Mac using Acrobat X Pro, how do I ensure it can be opened on a PC? Do I need to save as a particular version of Acrobat?

The system was not my own, it was on a PC belonging to the school where I teach. The error message referred to Acrobat 9.0, so I assume that the problem is to do with the version on which the file was created being more recent than that on which I attempeted to open it.

Missing images when printing to pdf from Word

When printing to pdf from MS Word 2003 in some cases textboxes and/or images disappear in the target PDF, depending on their position.
Word and Acrobat Standard are the latest updates. If the Word text is converted on a Mac the target pdf has the images present, so it looks like it's a Windows only problem. Any suggestions where to start looking for a fix?

You may have to turn on "display large images" in the preferences.

Text getting cut off when printing to PDF from Excel

Hello,
     I've seen a lot related to this subject but nothing that shows a real solution.
     Using Excel 2003-sp3 and Adobe Acrobat v.9 Standard, the right half of the last character in the string gets cut off. It prints from excel fine.
     It's not always the text that is the right-most on the page either. An affected PDF file is attached - note the cut off "S" on the last line (NET ASSETS OF GOVERNMENTAL ACTIVITIES).
     Any assistance is appreciated.
Thanks,
Kevin Murphy

please delete me from your mailing list. tks.
Date: Wed, 10 Feb 2010 11:20:28 -0700
From: [email protected]
To: [email protected]
Subject: Text getting cut off when printing to PDF from Excel
Hello,
     I've seen a lot related to this subject but nothing that shows a real solution.
     Using Excel 2003-sp3 and Adobe Acrobat v.9 Standard, the right half of the last character in the string gets cut off. It prints from excel fine.
     It's not always the text that is the right-most on the page either. An affected PDF file is attached - note the cut off "S" on the last line (NET ASSETS OF GOVERNMENTAL ACTIVITIES).
     Any assistance is appreciated.
Thanks,
Kevin Murphy
>

When printing to PDF from webpage, the pdf is compressed on the bottom of each page and markedly smaller print. How do I correct this?

When printing to PDF from webpage, the pdf is compressed on the bottom of each page and with markedly smaller print, the top of the page is fine. How do I correct this?

Open Contacts and click Preferences on the menu named Contacts. On the General tab of the Preferences window, select Show First Name: Before Last Name and then print. You can change that Preference back to the other way after printing if desired.

When creating a PDF from the scanner, it only scans one side despite the settings.

When creating a PDF from the scanner, it only scans one side. I am using a fi-7160 that supports scanning both sides at once. The Scanner software is configured to scan both sides, and so are the presets in Adobe Acrobat Pro. I've only gotten the setting to work with the Custom Scan setting. Has anyone else had this problem, and what is the solution?
Additionally, the software bundled with the scanner with automatically omit the back sides of a page if it is blank. I am scanning large files with occasional double sided pages. Is there a way to avoid having to manually delete blank pages when creating a new PDF from the scanner? It takes twice as long because I'm using the OCR stabilization.

Hi anne,
Could you please let me know what Acrobat and OS version are you using.
Does this happen in case of any particular PDF or all PDF files?
Try repairing Acrobat and then again check.
Hope to get your response.
Regards,
Anubha

Error in character spacing when exporting to pdf from word 07

I am having trouble with exporting to pdf from MS Word 07. The character spacing throughout the document is wacky. This also happens when exporting to pdf from a GIS program.
Any help?

I use the term export because that is how it is done in the GIS software that I use - ArcMap 10.
In MS Word I access Adobe Acrobat Pro 9 through the print menu. I am using Windows 7.
I do not always have this trouble, but it started yesterday on a 30 page word doc and then after that, it started on an ArcMap doc.
As for embedding fonts, when I check the Word doc as you suggested, i see many different fonts listed. Some are embedded, some embedded subset, some are not embedded at all. I use styles to manage font types and heading levels. There is nothing fancy about it - all Times New Roman.

Retaining active web links when distilling a PDF from PageMaker.

Similar Messages

Maybe you are looking for