No mapping found for '

Hi,
I am using JDeveloper 9.0.3.11.18(Build 1247) for WS.
We have generated a stub from our web services. Generation and compilation is not a problem. I have tested the web service from the end point, its working properly.
When I am calling the stub by crating an object in main method I am getting follwoing error:
No mapping found for ':altContactPhone' using encoding style 'http://schemas.xmlsoap.org/soap/encoding/'. [java.lang.IllegalArgumentException]
Process exited with exit code 0.
Help appriciated.
bye
Tarun

Hi Lehmann
i created a deployment descriptor for soap mapping
as below
<isd:service
xmlns:isd="http://xml.apache.org/xml-soap/deployment" id="vdc_pack.VdcWebServices">
<isd:provider
type="java"
scope="Application"
methods="getPchannelTar getCbsTar getCbsAar getQchannelTar getQchannelAar getPchannelAar getProgramAar getProgramTitle getChannelList">
<isd:java
class="vdc_pack.VdcWebServices"
static="false"/>
</isd:provider>
<isd:faultListener>org.apache.soap.server.DOMFaultListener</isd:faultListener>
<isd:mappings>
<isd:map
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:x="VdcWebServices" qname="x:vdc_pack_ChannelBean"
javaType="vdc_pack.ChannelBean"
java2XMLClassName="org.apache.soap.encoding.soapenc.BeanSerializer"
xml2JavaClassName="org.apache.soap.encoding.soapenc.BeanSerializer"/>
<isd:map
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:x="VdcWebServices" qname="x:vdc_pack_TitleBean"
javaType="vdc_pack.TitleBean"
java2XMLClassName="org.apache.soap.encoding.soapenc.BeanSerializer"
xml2JavaClassName="org.apache.soap.encoding.soapenc.BeanSerializer"/>
<isd:map
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:x="VdcWebServices" qname="x:vdc_pack_GroupBean"
javaType="vdc_pack.GroupBean1"
java2XMLClassName="org.apache.soap.encoding.soapenc.BeanSerializer"
xml2JavaClassName="org.apache.soap.encoding.soapenc.BeanSerializer"/>
</isd:mappings>
</isd:service>
when i tried to add the above mapping in the web.xml,i got an error saying unknown assembly tag <isd:service>
can you mail me where i need to add the deployment descriptor file.
i still have no success.
with regards
srinivas

Similar Messages

No mapping found for &apos

Hi
I have j2ee web services created using jdeveloper.They work fine when i use the web services end point url and test.But when i call them in a jsp page i get the following error.
error No mapping found for 'http://tempuri.org/IVdcWebServices.xsd:vdc_pack_GroupBean' using encoding style 'http://schemas.xmlsoap.org/soap/encoding/'. [java.lang.IllegalArgumentException]
Can somebody help to figure out what the problem is and if possible if you have a solution,please reply.
The return parameter is an array of bean serialized.
Thanking you in advance
with regards
srinivas

Hi Lehmann
i created a deployment descriptor for soap mapping
as below
<isd:service
xmlns:isd="http://xml.apache.org/xml-soap/deployment" id="vdc_pack.VdcWebServices">
<isd:provider
type="java"
scope="Application"
methods="getPchannelTar getCbsTar getCbsAar getQchannelTar getQchannelAar getPchannelAar getProgramAar getProgramTitle getChannelList">
<isd:java
class="vdc_pack.VdcWebServices"
static="false"/>
</isd:provider>
<isd:faultListener>org.apache.soap.server.DOMFaultListener</isd:faultListener>
<isd:mappings>
<isd:map
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:x="VdcWebServices" qname="x:vdc_pack_ChannelBean"
javaType="vdc_pack.ChannelBean"
java2XMLClassName="org.apache.soap.encoding.soapenc.BeanSerializer"
xml2JavaClassName="org.apache.soap.encoding.soapenc.BeanSerializer"/>
<isd:map
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:x="VdcWebServices" qname="x:vdc_pack_TitleBean"
javaType="vdc_pack.TitleBean"
java2XMLClassName="org.apache.soap.encoding.soapenc.BeanSerializer"
xml2JavaClassName="org.apache.soap.encoding.soapenc.BeanSerializer"/>
<isd:map
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:x="VdcWebServices" qname="x:vdc_pack_GroupBean"
javaType="vdc_pack.GroupBean1"
java2XMLClassName="org.apache.soap.encoding.soapenc.BeanSerializer"
xml2JavaClassName="org.apache.soap.encoding.soapenc.BeanSerializer"/>
</isd:mappings>
</isd:service>
when i tried to add the above mapping in the web.xml,i got an error saying unknown assembly tag <isd:service>
can you mail me where i need to add the deployment descriptor file.
i still have no success.
with regards
srinivas

Two Alerts for one scenario: Application Error and No mapping found

Hello,
we have a synchronous scenario here embedded in an BPM.
The last send step step is sync. The receiver is a web service (SOAP adapter) which sends back a response.
Problem with the response from the service:
First test: error entries in SXMB_MONI and in RWB
RWB only shows message "No mapping found".
SXMB_MONI shows more:
1 entry for send step (status: log version)
1 entry for APPLICATION ERROR for response
1 entry for NO_MAPPING_PROGRAMM_FOUND for response
APPLICATION ERROR:
We have changed to trace level 3 now and there are some messages:
level 3 message type T: Unknown channel type: SOAP
Don´t know if this matters, because the channel is the sender channel.
NO_MAPPING_PROGRAMM_FOUND:
We have checked the whole implementation.
It is completed w/o anything missing. the required mapping is available.
No left change list entries to be activated.
Error text:
The Interface-Mapping http://xxx.com/xi/global GetDocIDsReq_nach_GetDocIDsResp is not available in runtime cache
We made more than one full cache refresh but w/o any effect.
We checked: There are no locks left!
Does anybody here have experience with this problem or has more ideas what to do?
Best regards
Dirk
Message was edited by:
Dirk Meinhard

Hello Dirk,
We figured out that if you change your message mapping you also have to refresh and save your Interface Mapping.
To ensure that your messages are equal with your Interfaces and the Message Types you should test the Interface Mapping by using integration Builder.
If this works you have to check your BPM.
By using BPM we figured out that if there is a fault in a BPM version the engine will not use this new version.
To figure out which BPM version is used you have to open the
Process Monitor à select the process and display the graphic à navigate to EXTRAS and select Workflow Builder. There you will see which BPM is really used. Maybe this is an old one.
Hope this will show you where the problem is.
Daniel

When using Craigslist I keep getting this error: Warning! Domain mapping upgrade for this domain not found. Nothing I do works to fix this.

When I use Craigslist, my personal list of things being sold, and I try and renew my listings, I periodically get this: "Warning! Domain mapping upgrade for this domain not found. Please log in and go to the Domains Upgrades page of your blog to use this domain." Usually rebooting my computer makes it go away for a short time, but today that isn't working and following the commands on the warning doesn't work either...is this truly a firefox issue? How do I fix it.

Clear the cache and the cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"

No key field found for creation of DataSource - Classification Datasource

Hello,
While trying to create a clasiffication datasource based on 0PLANT_ATTR, when i assign a characteristic and push the DataSource button, i get the following message:
No key field found for creation of DataSource
Diagnosis
During generation of a classification or configuration DataSource, only those key fields for the object table (field "Obj.Tabelle") that are already present in the basis DataSource transferred to the extract structure. This is the case when none of the key fields of the object table were found in the structure of the basis DataSource.
System response
A DataSource cannot be created without key fields. The action was cancelled.
Procedure
Check whether you have selected the correct basis DataSource and object table. For more information, please see SAP Note 569849.
Do you know what can be the problem?
Thank you and regards

Hi Alberto,
plants are a special case. The key which is used for the classification
of plants (object type BETR) is not the same as the key which is used in
datasource 0PLANT_ATTR.
BETR has key LOCNR (Site). That's a customer related to a plant. The
customer number will be extracted in field LOCNR.
0PLANT_ATTR extracts the plant in its key field WERKS.
Transaction CTBW and the generic extraction program for classifications
don't know the relationship between LOCNR and WERKS. So they cannot map
them.
I do recommend a solution which would add the mapping between
LOCNR and WERKS:
1. Create please the classification datasource as intended, but use
datasource 0RT_LOC_MGR_ATTR as basis datasource. It's the only
datasource of the content where LOCNR is a key field. So
0RT_LOC_MGR_ATTR is used as a dummy here, to allow transaction CTBW to
create the classification datasource. It's not necessary to extract
data with datasource 0RT_LOC_MGR_ATTR.
2. Extend please the extract structure of the created classification
datasource. Add please field WERKS using component type WERKS_D. Make
this field visible.
3. Fill field WERKS in the extractor user exit EXIT_SAPLRSAP_002. WERKS
can be read from table KNA1 by using the customer number extracted to
LOCNR to select on field KNA1-KUNNR.
4. Transaction CTBW_META on the BW system isn't able to append the
characteristics from the classification datasource to infosource
0PLANT, because the keys are different. So create please a new info
source with CTBW_META. This allows CTBW_META to create the info objects
for the characteristics used in the classification datasource.
5. Add please the characteristics used in the classification datasource
to infosource 0PLANT manually. You will find the info object names of
the characteristics by looking up the characteristic datasources which
are assigned to the classification datasource in transaction CTBW. From
these names you can derive the info object names:
1CL_A... -> C_A...
6. Disconnect the infosource which has been created with CTBW_META from
the classification datasource.
7. Connect please the classification datasource to infosource 0PLANT
Use following info object:
info object   field
0PLANT       WERKS
The info object names for the characteristics are explained in step 5.
8. Add an infopackage to infosource 0PLANT for the classification
datasource.
Now the extraction of classifications of sites should work.
Best regards,
Rolf
P.S. I saw the system messed it up and doesn't display any new and empty lines. Sorry, I hope you still can read it.
Edited by: Rolf Doersam on Mar 26, 2010 6:56 PM

Huge performance differences between a map listener for a key and filter

Hi all,
I wanted to test different kind of map listener available in Coherence 3.3.1 as I would like to use it as an event bus. The result was that I found huge performance differences between them. In my use case, I have data which are time stamped so the full key of the data is the key which identifies its type and the time stamp. Unfortunately, when I had my map listener to the cache, I only know the type id but not the time stamp, thus I cannot add a listener for a key but for a filter which will test the value of the type id. When I launch my test, I got terrible performance results then I tried a listener for a key which gave me much better results but in my case I cannot use it.
Here are my results with a Dual Core of 2.13 GHz
1) Map Listener for a Filter
a) No Index
Create (data always added, the key is composed by the type id and the time stamp)
Cache.put
Test 1: Total 42094 millis, Avg 1052, Total Tries 40, Cache Size 80000
Cache.putAll
Test 2: Total 43860 millis, Avg 1096, Total Tries 40, Cache Size 80000
Update (data added then updated, the key is only composed by the type id)
Cache.put
Test 3: Total 56390 millis, Avg 1409, Total Tries 40, Cache Size 2000
Cache.putAll
Test 4: Total 51734 millis, Avg 1293, Total Tries 40, Cache Size 2000
b) With Index
Cache.put
Test 5: Total 39594 millis, Avg 989, Total Tries 40, Cache Size 80000
Cache.putAll
Test 6: Total 43313 millis, Avg 1082, Total Tries 40, Cache Size 80000
Update
Cache.put
Test 7: Total 55390 millis, Avg 1384, Total Tries 40, Cache Size 2000
Cache.putAll
Test 8: Total 51328 millis, Avg 1283, Total Tries 40, Cache Size 2000
2) Map Listener for a Key
Update
Cache.put
Test 9: Total 3937 millis, Avg 98, Total Tries 40, Cache Size 2000
Cache.putAll
Test 10: Total 1078 millis, Avg 26, Total Tries 40, Cache Size 2000
Please help me to find what is wrong with my code because for now it is unusable.
Best Regards,
Nicolas
Here is my code
import java.io.DataInput;
import java.io.DataOutput;
import java.io.IOException;
import java.util.HashMap;
import java.util.Map;
import com.tangosol.io.ExternalizableLite;
import com.tangosol.net.CacheFactory;
import com.tangosol.net.NamedCache;
import com.tangosol.util.Filter;
import com.tangosol.util.MapEvent;
import com.tangosol.util.MapListener;
import com.tangosol.util.extractor.ReflectionExtractor;
import com.tangosol.util.filter.EqualsFilter;
import com.tangosol.util.filter.MapEventFilter;
public class TestFilter {
      * To run a specific test, just launch the program with one parameter which
      * is the test index
     public static void main(String[] args) {
          if (args.length != 1) {
               System.out.println("Usage : java TestFilter 1-10|all");
               System.exit(1);
          final String arg = args[0];
          if (arg.endsWith("all")) {
               for (int i = 1; i <= 10; i++) {
                    test(i);
          } else {
               final int testIndex = Integer.parseInt(args[0]);
               if (testIndex < 1 || testIndex > 10) {
                    System.out.println("Usage : java TestFilter 1-10|all");
                    System.exit(1);
               test(testIndex);
     @SuppressWarnings("unchecked")
     private static void test(int testIndex) {
          final NamedCache cache = CacheFactory.getCache("test-cache");
          final int totalObjects = 2000;
          final int totalTries = 40;
          if (testIndex >= 5 && testIndex <= 8) {
               // Add index
               cache.addIndex(new ReflectionExtractor("getKey"), false, null);
          // Add listeners
          for (int i = 0; i < totalObjects; i++) {
               final MapListener listener = new SimpleMapListener();
               if (testIndex < 9) {
                    // Listen to data with a given filter
                    final Filter filter = new EqualsFilter("getKey", i);
                    cache.addMapListener(listener, new MapEventFilter(filter), false);
               } else {
                    // Listen to data with a given key
                    cache.addMapListener(listener, new TestObjectSimple(i), false);
          // Load data
          long time = System.currentTimeMillis();
          for (int iTry = 0; iTry < totalTries; iTry++) {
               final long currentTime = System.currentTimeMillis();
               final Map<Object, Object> buffer = new HashMap<Object, Object>(totalObjects);
               for (int i = 0; i < totalObjects; i++) {
                    final Object obj;
                    if (testIndex == 1 || testIndex == 2 || testIndex == 5 || testIndex == 6) {
                         // Create data with key with time stamp
                         obj = new TestObjectComplete(i, currentTime);
                    } else {
                         // Create data with key without time stamp
                         obj = new TestObjectSimple(i);
                    if ((testIndex & 1) == 1) {
                         // Load data directly into the cache
                         cache.put(obj, obj);
                    } else {
                         // Load data into a buffer first
                         buffer.put(obj, obj);
               if (!buffer.isEmpty()) {
                    cache.putAll(buffer);
          time = System.currentTimeMillis() - time;
          System.out.println("Test " + testIndex + ": Total " + time + " millis, Avg " + (time / totalTries) + ", Total Tries " + totalTries + ", Cache Size " + cache.size());
          cache.destroy();
     public static class SimpleMapListener implements MapListener {
          public void entryDeleted(MapEvent evt) {}
          public void entryInserted(MapEvent evt) {}
          public void entryUpdated(MapEvent evt) {}
     public static class TestObjectComplete implements ExternalizableLite {
          private static final long serialVersionUID = -400722070328560360L;
          private int key;
          private long time;
          public TestObjectComplete() {}
          public TestObjectComplete(int key, long time) {
               this.key = key;
               this.time = time;
          public int getKey() {
               return key;
          public void readExternal(DataInput in) throws IOException {
               this.key = in.readInt();
               this.time = in.readLong();
          public void writeExternal(DataOutput out) throws IOException {
               out.writeInt(key);
               out.writeLong(time);
     public static class TestObjectSimple implements ExternalizableLite {
          private static final long serialVersionUID = 6154040491849669837L;
          private int key;
          public TestObjectSimple() {}
          public TestObjectSimple(int key) {
               this.key = key;
          public int getKey() {
               return key;
          public void readExternal(DataInput in) throws IOException {
               this.key = in.readInt();
          public void writeExternal(DataOutput out) throws IOException {
               out.writeInt(key);
          public int hashCode() {
               return key;
          public boolean equals(Object o) {
               return o instanceof TestObjectSimple && key == ((TestObjectSimple) o).key;
}Here is my coherence config file
<?xml version="1.0"?>
<!DOCTYPE cache-config SYSTEM "cache-config.dtd">
<cache-config>
     <caching-scheme-mapping>
          <cache-mapping>
               <cache-name>test-cache</cache-name>
               <scheme-name>default-distributed</scheme-name>
          </cache-mapping>
     </caching-scheme-mapping>
     <caching-schemes>
          <distributed-scheme>
               <scheme-name>default-distributed</scheme-name>
               <backing-map-scheme>
                    <class-scheme>
                         <scheme-ref>default-backing-map</scheme-ref>
                    </class-scheme>
               </backing-map-scheme>
          </distributed-scheme>
          <class-scheme>
               <scheme-name>default-backing-map</scheme-name>
               <class-name>com.tangosol.util.SafeHashMap</class-name>
          </class-scheme>
     </caching-schemes>
</cache-config>Message was edited by:
user620763

Hi Robert,
Indeed, only the Filter.evaluate(Object obj)
method is invoked, but the object passed to it is a
MapEvent.<< In fact, I do not need to implement EntryFilter to
get a MapEvent, I could get the same result (in my
last message) by writting
cache.addMapListener(listener, filter,
true)instead of
cache.addMapListener(listener, new
MapEventFilter(filter) filter, true)
I believe, when the MapEventFilter delegates to your filter it always passes a value object to your filter (old or new), meaning a value will be deserialized.
If you instead used your own filter, you could avoid deserializing the value which usually is much larger, and go to only the key object. This would of course only be noticeable if you indeed used a much heavier cached value class.
The hashCode() and equals() does not matter on
the filter class<< I'm not so sure since I noticed that these methods
were implemented in the EqualsFilter class, that they
are called at runtime and that the performance
results are better when you add them
That interests me... In what circumstances did you see them invoked? On the storage node before sending an event, or upon registering a filtered listener?
If the second, then I guess the listeners are stored in a hash-based map of collections keyed by a filter, and indeed that might be relevant as in that case it will cause less passes on the filter for multiple listeners with an equalling filter.
DataOutput.writeInt(int) writes 4 bytes.
ExternalizableHelper.writeInt(DataOutput, int) writes
1-5 bytes (or 1-6?), with numbers with small absolute
values consuming less bytes.Similar differences exist
for the long type as well, but your stamp attribute
probably will be a large number...<< I tried it but in my use case, I got the same
results. I guess that it must be interesting, if I
serialiaze/deserialiaze many more objects.
Also, if Coherence serializes an
ExternalizableLite object, it writes out its
class-name (except if it is a Coherence XmlBean). If
you define your key as an XmlBean, and add your class
into the classname cache configuration in
ExternalizableHelper.xml, then instead of the
classname, only an int will be written. This way you
can spare a large percentage of bandwidth consumed by
transferring your key instance as it has only a small
number of attributes. For the value object, it might
or might not be so relevant, considering that it will
probably contain many more attributes. However, in
case of a lite event, the value is not transferred at
all.<< I tried it too and in my use case, I noticed that
we get objects nearly twice lighter than an
ExternalizableLite object but it's slower to get
them. But it is very intersting to keep in mind, if
we would like to reduce the network traffic.
Yes, these are minor differences at the moment.
As for the performance of XMLBean, it is a hack, but you might try overriding the readExternal/writeExternal method with your own usual ExternalizableLite implementation stuff. That way you get the advantages of the xmlbean classname cache, and avoid its reflection-based operation, at the cost of having to extend XMLBean.
Also, sooner or later the TCMP protocol and the distributed cache storages will also support using PortableObject as a transmission format, which enables using your own classname resolution and allow you to omit the classname from your objects. Unfortunately, I don't know when it will be implemented.
>
But finally, I guess that I found the best solution
for my specific use case which is to use a map
listener for a key which has no time stamp, but since
the time stamp is never null, I had just to check
properly the time stamp in the equals method.
I would still recommend to use a separate key class, use a custom filter which accesses only the key and not the value, and if possible register a lite listener instead of a heavy one. Try it with a much heavier cached value class where the differences are more pronounced.
Best regards,
Robert

No Receiver agreement found for Sender

Hello,
I have a scenario like this : sending an IDoc from R/3 4.6c to R/3 4.7 through XI 3.0.
I am struck up with the follwoing Error in SXMB_MONI
"outbound binding exception: No outbound binding found for , R46, , ENT, urn:sap-com:document:sap:idoc:messages, ORDERS.ORDERS04"
The Complete TRACE is as follows:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="B" name="IDX_INBOUND_XMB" />
- 
<Trace level="1" type="T">ALE-AUDIT-IDoc-Inbound Handling</Trace>
<Trace level="1" type="T">IDoc-Inbound-Handling</Trace>
<Trace level="1" type="T">Syntax-Check-Flag X</Trace>
<Trace level="1" type="T">IDoc-Tunnel-Flag X</Trace>
<Trace level="1" type="T">Queueid</Trace>
- <Trace level="1" type="B" name="IDX_IDOC_TO_XML">
<Trace level="1" type="T">Get the Metadata for port SAPR46</Trace>
<Trace level="1" type="T">Convert Segment-Definitions to Types</Trace>
<Trace level="1" type="T">Make Syntax check of actual Idoc</Trace>
</Trace>
<Trace level="1" type="T">Set Receiver Routing-object</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_IDX_IDOC_RESOURCE-SET_IDOC" />
<Trace level="1" type="T">Exit Function IDX_INBOUND_XMB</Trace>
- <Trace level="1" type="B" name="CL_IDX_IDOC_RESOURCE-GETBLOBDATA">
<Trace level="1" type="B" name="CL_IDX_IDOC_RESOURCE-ITAB_TO_BINARY" />
</Trace>
<Trace level="1" type="T">COMMIT is expected by application !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = XI3</Trace>
<Trace level="1" type="T">client = 800</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = SMART01</Trace>
<Trace level="1" type="Timestamp">2004-12-27T20:08:46Z CET</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = F0EAB201EEA5F74A814EF22C32394FD0</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="1" type="T">Queue name : XBTI0009</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0009</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = XI3</Trace>
<Trace level="1" type="T">client = 800</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = SMART01</Trace>
<Trace level="1" type="Timestamp">2004-12-27T20:08:46Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- 
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- 
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTO____0000</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = XI3</Trace>
<Trace level="1" type="T">client = 800</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = SMART01</Trace>
<Trace level="1" type="Timestamp">2004-12-27T20:08:46Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
- <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
<Trace level="1" type="T">No mapping required</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="CL_IDX_IDOC_RESOURCE-GETBLOBDATA" />
<Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
- <Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV">
<Trace level="1" type="T">processing the outbound binding</Trace>
<Trace level="1" type="T">search outbound bindings</Trace>
<Trace level="1" type="T">outbound binding exception: No outbound binding found for , R46, , ENT, urn:sap-com:document:sap:idoc:messages, ORDERS.ORDERS04</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
</SAP:Trace>
I have made neccesary Configurations for the Receiver agreement in the Configuration Directory...
Anybody could please help me out...
Regards,
Romit Arun Shankar

Hi Frank,
Many Thanks for your reply.The problem got sorted out and the IDoc(ORDERS04) which i send in SAP 4.6c gets into SAP 4.7 AS ORDERS04 but i have a new problem now....
I didnt use any mappings until now...but now i have to have the segment E1EDK14 filled up for Sales organisation, Distribution Channel, Division details as well as the material number. These segments will not be filled up when a PO is sent from the source system.These segments has to be filled only in the XI system...Is it ? or is there any other solution for it....
Now how we can have this segment E1EDK14 which can occur any number of times with constant values for SORG,DV,DC in the mapping process....
Waiting for ur replies....
Bye,
Romit Shankar Arun.
For this

IDOC to FTP File - Error : SAP:Stack No receiver agreement found for send

Hello Friends,
I need to configure a senario Idoc to FTP File, Í did required settings in R3 and in PI... , did mapping and configuratino in PI... and when I send my idoc I got error msg in monitor
<SAP:Stack>No receiver agreement found for sender ,BMG_ASN_File_Component to receiver ,GTN_224,http://adis-bmg.de/asn,SI_BMG_ASN</SAP:Stack>
I search the fourm but did not got my answer, me just a bit confused...
In my senario I have having followings:
1. Bussiness System ( RFT : sender R3 system). ( I have define a party and make a connection under Idoc Partner )
2. Bussiness Component ( ZTEST_COMP as on Reciever side is File Server, so I define the reciver as bussiness component )
3. Communicatin Channel
    File with protocol FTP having communicatin component as my Bussiness Component ( reciver ). there I defied the required info for FTP
4. Reciever Determination
    Sender:
    - RFT
    - Idoc-Interface
    - urn:sap-com:document:sap:idoc:messages
   Reciever
    communication party = space
    communicatin component = ZTEST_COMP
    Configure Reciever:
   There I again define the communication component as ( ZTEST_COMP)
5. Interface Determination
    -RFT
    - Idoc-Interface
    - urn:sap-com:document:sap:idoc:messages
   Reviever:
    ZTEST_COMP
and define the mapping which I did in design ( although I have seen some threads where mentioned we dont need maaping in this case ) ?
6. Reciver agrement
sender:
- RFT
Reviver:
- ZTEST_COMP
- SI interface ( SI_BMG_ASN )
- http://test-etc.de/asn
and included my CC for file .....
Now when I send Idoc I got error msg that Reciver is not found : am I dong something wrong ? do I have to defien a bussiness system instead of Bussiness Component ?
Pls suggest...

( I have define a party and make a connection under Idoc Partner
Do you really need a party in your communication? Should it not be a partly-less communication.
In the receiver agreement ensure that you have included the inbound message interface.
communication party = space
No need to give any space.
In the Interface Determination i hope that you have included the receiver meessage interface and then the corresponding Interface Mapping.
If still not works then make some dummy changes and again activate....correspondingly check the cache status of the ID-objects
Regards,
Abhishek.

No standard agreement found for BS_A ,, BS_B

Hi Experts,
We are getting a very common error " No standard agreement found for BS_A ,, BS_B https://abc.com,SIOA_forcast,,,
There interface was succsfully executing few days back.
Here are some information abount the interafce.
1) JMS to IDOC
2) IDoc control record mapping
When i checked the pipe line steps in MONI , starngely it is showing
SAME SENDER interface name SIOA_forcast in sender and receiver interface . And thus it got failed in reciver agreent. I could not see the Idoc and IDoc namespace
I have searched in SDN but, did not get any clear picture
I have done the following
1) checked SXI_CAHCE and cahche instance if every object.
All objects are up -to-date
2) Deleted and recreated ID objects
3) Check the interfaces in message mapping , operation mapping , interface determination etc..., all are looking fine.
DId anyone faced this issue before.
I have asked basis for a full refresh , but i am not confident wheather that will solve the issue or not.
Please provide your valuable input and let me understand the issue.

Hi Sam
Was anything changed during last few days?
PI is not able to determine receiver interface and keeps sender inteface details. For this reason it can't find receiver agreement.
Check that your interface determination object is correct and perform a full cache refresh.
Also copy your message payload from SXMB_MONI and use the test tool (Tools -> Test configuration) in ID.
Regards,
Giuseppe

Error in load master data from flat file to infocube "No SID found for val"

Hi gurus
while i m loding data from ffile to infocube. getting error message "No SID found for value 'HOT ' of characteristic 0UNIT" for material name field .
in flat file one fileld having lower carrecter so i have defined formula for upper case in transfer rule.
after scheduleing message is "data was requested". but in monitor-> detail-> request, extraction status is green and transfer , processing ststus are red.
overall status is red.

It appears your transfer structure and source file are not mapped correctly. Make sure your source file is in the correct format. TRy the "preview" function to make sure.
Also, is the file and your log on language the same? For instance is the file from a GErman user but you are logged in in English? You will see errors like that when you use ST (Stuck = Pieces) instead of PC (Peices in English)
To test a bad mapping, hard code the Unit to something to make sure...(to PC for instance).
Also, the error message you are getting is because of transfer structure, please re-activate it. IF it persists, try to skip the PSA and go straight to the data target.
Message was edited by: Steve Wilson
Message was edited by: Steve Wilson

JPA - "no Metadata found for type" exception

I use WebLogic 10 with Kodo as the JPA implementation. When attempting to query the DB for an entity, I get this very weird exception:
org.apache.openjpa.persistence.ArgumentException: No metadata was found for type "class com.verid.ims.model.AddressUS". The class does not appear in the list of persistent types: [com.verid.ims.model.Birthdate, com.verid.ims.model.PersonName, com.verid.ims.model.AddressUS, com.rsa.idv.ims.feedback.IMSFeedback, com.rsa.idv.ims.notification.IMSNotification, com.rsa.idv.ims.provider.IMSProvider, com.rsa.idv.ims.notification.NotificationEntry, com.rsa.idv.ims.enroll.SecretUserQuestion, com.rsa.idv.ims.enroll.Enrollment].
Please take into account that the AddressUS class, which according to the exception does not appear in the list of persistent types, is actually in the list! (Bold)
The AddressUS class is mapped in my orm.xml file (it's not in the persistence.xml descriptor since it's not an entity, only an embeddable). Here is the mapping:
<embeddable class="com.verid.ims.model.AddressUS">
<attributes>
<basic name="city" />
<basic name="state">
<enumerated>STRING</enumerated>
</basic>
<basic name="street1" />
<basic name="street2" />
<basic name="zipcode" />
<basic name="suite" />
</attributes>
</embeddable>
Needless to say, the persistence.xml descriptor refers to the orm.xml file.
The exception only happens on some environments (not all of them), which basically means that it's an environmental problem. What could cause this?

Thanks, that did help and it was throwing similar errors for other jar files, which I added and now the page opens.
But the issue that I am facing now is on this page there is a Manager Search, wherein I can proxy a manager.
This Search popup is not returning any values. Previously if I reinstalled my system-jazn-data.xml file from my colleauge
and rebooting my laptop worked. But now even that doe snot help.
Srinivasa Sunchu

0UNIT - No SID value found for value 'FYR' of characteristic 0UNIT

Dear All,
Request your help for the following issue observed.
Please find below the details of the issue observed:
Scenario: A flat file upload in and ODS with field Alternate Unit of Measure (mapped to 0UNIT)
Issue: While activating the data in the ODS (Transformation, RSDS transaction datasource), it gives an error stating 'No SID found for value 'FOZ' of characteristic 0UNIT'.
Measures tried: Transferring Global Settings, Checking in the table 'T006', Checking the format of the flat file.
May I please request your help for the above issue at the earliest.
Thank you.
Regards,
Kunal Gandhi

Hello,
Same issue here.
I've checked the entries in 0UNIT SID table: The unit "xxx" is not present.
But this unit is present in T006 table, with no specific option.
The update mode for Master Data on SPRO is : "Create master data if Not avalaible (Auto_sid)"
The update mode in infopackage is "Always update data, even if no master data exist for the data"
I've used the "Rebuild tables" mode for Units of measurement for my source system.
The tried the simulate update for my datapackage.
==> No errors
==>deletion of package on the data target
==>manuel update of data from the package
==>change to green
==>check the 0UNIT SID table : The unit "xxx" is now present !
Hope this helps

WL6.1 : Get '404 : File not found' for all WARs

I had some web applications deployed which were running perfectly. Now suddenly
, I get '404 - File not found' for any URL - including the server root, i.e. http://localhost/
I was able to access admin console using http://localhost/console. I checked the
config of each application & couldn't find anything wrong.
Finally I had to re-deploy the WARs to get some applications running.
However, I am still unable to get the Default Web App running - the one handling
server root path.. (I've checked the server config & it shows DefaultWebApp as
the default application).
Any pointers on what could be wrong / correction needed ?
TIA,
Subodh

Create a subdirectory called 'classes' and copy your servlet class file
          to the 'classes' dir.
          mydomain/applications/
          DefaultWebApp/
          WEB-INF/classes.
          Modify the web.xml file located in the mydomain/applications/
          DefaultWebApp/
          WEB-INF/ directory
          <web-app>
          <servlet>
          <servlet-name>
          myServlet
          </servlet-name>
          <servlet-class>
          package.name.myServlet
          </servlet-class>
          </servlet>
          <servlet-mapping>
          <servlet-name>
          myServlet
          </servlet-name>
          <url-pattern>
          servlet-url-pattern
          </url-pattern>
          </servlet-mapping>
          </web-app>
          Start the default WebLogic Server.
          Call your servlet from a Web browser with the following URL:
          http://localhost:port/servlet-url-pattern
          servlet-url-pattern is the value of the <url-pattern> element that you
          defined in the web.xml file.
          prakash wrote:
          > Hi everybody ,I have this web app on weblogic 7 .The application
          > works file with Tomcat 4.0 but on WebLogic server 7,I am getting
          > 404 not found for all the servlets ,although weblogic is serving
          > the html files without any problems

One mapping program for three diferent enviroments

Hello there,
I have developed a scenario in which an rfc requests a web service trough XI. In the process a BPM is involved together with some XSLT mappings.
     R3->XI->WebService
The Web service request message looks like follows:
<?xml version="1.0" encoding="UTF-8"?>
<cem:Z_ORDER_SEARCH xmlns:cem="http://XXXXXXXX/yyyyyyyyyyyy">
     <messageStructure/>
</cem:Z_ORDER_SEARCH>
Where "http://XXXXXXXX/yyyyyyyyyyyy" Is the web service destination.
Everything works fine, but as I have to manage three different environments for Development, Quality and Production I need three different versions of the XSL mapping since destinations are not the same for Dev, Qlty and Production environments.
I found out that I can get information of the sender using runtime parameters as follows:
<xsl:param name="SenderSystem">
I would like to evaluate this information to determine the target URL destination.
If the sender is the development sender then the URL target is the development destination and so on.
I tried the following code:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:fo="http://www.w3.org/1999/XSL/Format"
xmlns:cemDev="http://developmentDestination"
xmlns:cemQlty="http://qualityDestination"
xmlns:cemPrd="http://productionDestination"
xmlns:cem=""
<xsl:namespace-alias stylesheet-prefix="cem" result-prefix="cemDev"/>
<xsl:template match="/">
     <cem:mappingProgram/>
</xsl:template>
</xsl:stylesheet>
This works all right, but I cannot insert code to evaluate the destination.
On the other hand, this code is not valid:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:fo="http://www.w3.org/1999/XSL/Format"
xmlns:cemDev="http://developmentDestination"
xmlns:cemQlty="http://qualityDestination"
xmlns:cemPrd="http://productionDestination"
xmlns:cem="">
<xsl:param name="SenderSystem"/>
     <xsl:choose>
          <xsl:when test="string($SenderSystem) = 'PRODUCTION'">
               <xsl:namespace-alias stylesheet-prefix="cem" result-prefix="cemPrd"/>
          </xsl:when>
          <xsl:when test="string($SenderSystem) = 'QUALITY'">
               <xsl:namespace-alias stylesheet-prefix="cem" result-prefix="cemQlty"/>
          </xsl:when>
          <xsl:otherwise>
               <xsl:namespace-alias stylesheet-prefix="cem" result-prefix="cemDev"/>
          </xsl:otherwise>
     </xsl:choose>
     <xsl:template match="/">
          <cem:mappingProgram/>
     </xsl:template>
</xsl:stylesheet>
Neither this one:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:fo="http://www.w3.org/1999/XSL/Format"
xmlns:cemDev="http://developmentDestination"
xmlns:cemQlty="http://qualityDestination"
xmlns:cemPrd="http://productionDestination"
xmlns:cem="">
        <xsl:param name="SenderSystem"/>
        <xsl:template match="/">
     <xsl:choose>
          <xsl:when test="string($SenderSystem) = 'PRODUCTION'">
               <xsl:namespace-alias stylesheet-prefix="cem" result-prefix="cemPrd"/>
          </xsl:when>
          <xsl:when test="string($SenderSystem) = 'QUALITY'">
               <xsl:namespace-alias stylesheet-prefix="cem" result-prefix="cemQlty"/>
          </xsl:when>
          <xsl:otherwise>
               <xsl:namespace-alias stylesheet-prefix="cem" result-prefix="cemDev"/>
          </xsl:otherwise>
     </xsl:choose>
     <cem:mappingProgram/>
      </xsl:template>
</xsl:stylesheet>
I tried this other code, which is obviously not valid:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
     <xsl:template match="/">
          <xsl:param name="SenderSystem"/>
          <xsl:choose>
               <xsl:when test="string($SenderSystem) = 'PRODUCTION'">
                    <cem:Z_ORDER_SEARCH xmlns:cem="http://productionDestination">
               </xsl:when>
               <xsl:when test="string($SenderSystem) = 'QUALITY'">
                    <cem:Z_ORDER_SEARCH xmlns:cem="http://qualityDestination">
               </xsl:when>
               <xsl:otherwise>
                    <cem:Z_ORDER_SEARCH xmlns:cem="http://developmentDestination">
               </xsl:otherwise>
          </xsl:choose>
     <cem:mappingProgram/>
</cem:Z_ORDER_SEARCH>
     </xsl:template>
</xsl:stylesheet>
So the only way I found to make it works is like this:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
     <xsl:template match="/">
          <xsl:param name="SenderSystem"/>
          <xsl:choose>
               <xsl:when test="string($SenderSystem) = 'PRODUCTION'">
                    <cem:Z_ORDER_SEARCH xmlns:cem="http://productionDestination">
     <cem:mappingProgram/>
                    </cem:Z_ORDER_SEARCH>
               </xsl:when>
               <xsl:when test="string($SenderSystem) = 'QUALITY'">
                    <cem:Z_ORDER_SEARCH xmlns:cem="http://qualityDestination">
     <cem:mappingProgram/>
                    </cem:Z_ORDER_SEARCH>
               </xsl:when>
               <xsl:otherwise>
                    <cem:Z_ORDER_SEARCH xmlns:cem="http://developmentDestination">
     <cem:mappingProgram/>
                    </cem:Z_ORDER_SEARCH>
               </xsl:otherwise>
          </xsl:choose>
     </xsl:template>
</xsl:stylesheet>
Unfortunately this doesnt solve my problem, because I need to reproduce the mapping program three times in the document.
Any ideas, or suggestions how to manage one mapping program for the three different environments?
Thanks a lot in advance, Raú

Hi there,
I just found one way of getting this done. It may not be the better waw, but I post it in case it is helpfull.
<?xml version="1.0" encoding="utf-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:fo="http://www.w3.org/1999/XSL/Format">
     
     <xsl:param name="senderSystem"/>
     
     <xsl:variable name="qualitySenderSystem" select="'WHATEVERTHENAMEOFTHEQUALITYSENDERSYSTEM'"/>
     <xsl:variable name="productionSenderSystem" select="'WHATEVERTHENAMEOFTHEPRODUCTIONSENDERSYSTEM'"/>
     
     <xsl:template name="mappingProgram" match="/">
          
          <UNIQUE_MAPPING_PROGRAM/>
          
     </xsl:template>
     <!Receiver determination depending on senderSystem>
     <xsl:template match="/">
          <xsl:choose>
               <xsl:when test="$senderSystem=$productionSenderSystem">
                    <xxx:Z_ORDER_SEARCH xmlns:xxx="http://production">
                         <xsl:call-template name="mappingProgram"/>
                    </xxx:Z_ORDER_SEARCH>
               </xsl:when>
               <xsl:when test="$senderSystem=$qualitySenderSystem">
                    <xxx:Z_ORDER_SEARCH xmlns:xxx="http://quality">
                         <xsl:call-template name="mappingProgram"/>
                    </xxx:Z_ORDER_SEARCH>
               </xsl:when>
               <xsl:otherwise>
                    <xxx:Z_ORDER_SEARCH xmlns:xxx="http://development">
                         <xsl:call-template name="mappingProgram"/>
                    </xxx:Z_ORDER_SEARCH>
               </xsl:otherwise>
          </xsl:choose>
     </xsl:template>
</xsl:stylesheet>

[JCA] ManagedConnectionFactory not found for jndiName SNMPConnectionFactory

I tried to deploy and use my JCA Adapter in weblogic (6.1 and 8 versions).
final Context context = getNamingContext();
Object object = context.lookup(SNMPConnectionFactory.class.getName());
if (object instanceof Reference)
object = NamingManager.getObjectInstance(object, null, context,
null);
But always have error:
There was 1 error:
1) testJNDIConnection(com.mediation.snmpcisco.SNMPTest)javax.resource.spi.ApplicationServerInternalException: Managed Connection Factory not found for jndiName com.mediation.jca.snmp.SNMPConnectionFactory
     at weblogic.connector.common.internal.ConnectionPoolManager.createConnectionFactory(ConnectionPoolManager.java:123)
     at weblogic.connector.deploy.JNDIHandler.getObjectInstance(JNDIHandler.java:28)
     at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:299)
     at com.mediation.snmpcisco.SNMPTest.testJNDIConnection(SNMPTest.java:88)
     at com.mediation.snmpcisco.SNMPTest.main(SNMPTest.java:50)ra.xml:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE connector PUBLIC '-//Sun Microsystems, Inc.//DTD Connector 1.0//EN' 'http://java.sun.com/dtd/connector_1_0.dtd'>
<connector>
     <display-name>SNMP JCA Adapter</display-name>
     <description>...</description>
     <vendor-name>...</vendor-name>
     <spec-version>1.0</spec-version>
     <eis-type>SNMP</eis-type>
     <version>1.0</version>
     <resourceadapter>
          <managedconnectionfactory-class>com.mediation.jca.snmp.SNMPManagedConnectionFactory</managedconnectionfactory-class>
          <connectionfactory-interface>com.mediation.jca.snmp.SNMPConnectionFactory</connectionfactory-interface>
          <connectionfactory-impl-class>com.mediation.jca.snmp.SNMPConnectionFactoryImpl</connectionfactory-impl-class>
          <connection-interface>com.mediation.jca.snmp.SNMPConnection</connection-interface>
          <connection-impl-class>com.mediation.jca.snmp.SNMPConnectionImpl</connection-impl-class>
     </resourceadapter>
</connector>weblogic-ra.xml:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE weblogic-connection-factory-dd PUBLIC '-//BEA Systems, Inc.//DTD WebLogic 6.0.0 Connector//EN' 'http://www.bea.com/servers/wls600/dtd/weblogic-ejb-jar.dtd'>
<weblogic-connection-factory-dd>
     <connection-factory-name>com.mediation.jca.snmp.SNMPManagedConnectionFactory</connection-factory-name>
     <jndi-name>com.mediation.jca.snmp.SNMPConnectionFactory</jndi-name>
     <pool-params>
          <initial-capacity>0</initial-capacity>
          <max-capacity>1</max-capacity>
          <capacity-increment>1</capacity-increment>
          <shrinking-enabled>false</shrinking-enabled>
          <shrink-period-minutes>200</shrink-period-minutes>
     </pool-params>
     <logging-enabled>true</logging-enabled>
     <log-filename>nc-jca-snmp</log-filename>
     <security-principal-map/>
</weblogic-connection-factory-dd>Where is error? ConnectionFactory Reference normally stored in JNDI. But lookup provides exception :(

I tried to deploy and use my JCA Adapter in weblogic (6.1 and 8 versions).
final Context context = getNamingContext();
Object object = context.lookup(SNMPConnectionFactory.class.getName());
if (object instanceof Reference)
object = NamingManager.getObjectInstance(object, null, context,
null);
But always have error:
There was 1 error:
1) testJNDIConnection(com.mediation.snmpcisco.SNMPTest)javax.resource.spi.ApplicationServerInternalException: Managed Connection Factory not found for jndiName com.mediation.jca.snmp.SNMPConnectionFactory
     at weblogic.connector.common.internal.ConnectionPoolManager.createConnectionFactory(ConnectionPoolManager.java:123)
     at weblogic.connector.deploy.JNDIHandler.getObjectInstance(JNDIHandler.java:28)
     at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:299)
     at com.mediation.snmpcisco.SNMPTest.testJNDIConnection(SNMPTest.java:88)
     at com.mediation.snmpcisco.SNMPTest.main(SNMPTest.java:50)ra.xml:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE connector PUBLIC '-//Sun Microsystems, Inc.//DTD Connector 1.0//EN' 'http://java.sun.com/dtd/connector_1_0.dtd'>
<connector>
     <display-name>SNMP JCA Adapter</display-name>
     <description>...</description>
     <vendor-name>...</vendor-name>
     <spec-version>1.0</spec-version>
     <eis-type>SNMP</eis-type>
     <version>1.0</version>
     <resourceadapter>
          <managedconnectionfactory-class>com.mediation.jca.snmp.SNMPManagedConnectionFactory</managedconnectionfactory-class>
          <connectionfactory-interface>com.mediation.jca.snmp.SNMPConnectionFactory</connectionfactory-interface>
          <connectionfactory-impl-class>com.mediation.jca.snmp.SNMPConnectionFactoryImpl</connectionfactory-impl-class>
          <connection-interface>com.mediation.jca.snmp.SNMPConnection</connection-interface>
          <connection-impl-class>com.mediation.jca.snmp.SNMPConnectionImpl</connection-impl-class>
     </resourceadapter>
</connector>weblogic-ra.xml:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE weblogic-connection-factory-dd PUBLIC '-//BEA Systems, Inc.//DTD WebLogic 6.0.0 Connector//EN' 'http://www.bea.com/servers/wls600/dtd/weblogic-ejb-jar.dtd'>
<weblogic-connection-factory-dd>
     <connection-factory-name>com.mediation.jca.snmp.SNMPManagedConnectionFactory</connection-factory-name>
     <jndi-name>com.mediation.jca.snmp.SNMPConnectionFactory</jndi-name>
     <pool-params>
          <initial-capacity>0</initial-capacity>
          <max-capacity>1</max-capacity>
          <capacity-increment>1</capacity-increment>
          <shrinking-enabled>false</shrinking-enabled>
          <shrink-period-minutes>200</shrink-period-minutes>
     </pool-params>
     <logging-enabled>true</logging-enabled>
     <log-filename>nc-jca-snmp</log-filename>
     <security-principal-map/>
</weblogic-connection-factory-dd>Where is error? ConnectionFactory Reference normally stored in JNDI. But lookup provides exception :(

No mapping found for '

Similar Messages

Maybe you are looking for