Reteiving Accounting Document number by passing the reference key

Hi All,
I have the reference key (bkpf-awkey), fiscal year(gjahr) and bukrs and I need to retreive the Accounting doc number(Belnr).
Right now, I am writing a select statement to retreive belnr from bkpf and passing bukrs, gjahr and awkey in the where clause (for all entries in another internal table containing these fields).
But the performance is pretty poor. Pls help.

Hi,
you have to go for index 4 of BKPF (with fields MANDT, AWTYP, AWKEY, AWSYS).
Your select does not contain AWTYP, so this index is not used. You are filling BUKRS and GJAHR - but you don't have BELNR (that's what you want to get), so primary key won't help (unless you have thousands of BUKRS, unlikely picture).
So select some entries to figure out, which AWTYP you use, maybe you can even specify AWSYS. Then index 4 should be nearly as fast as the primary key. To not confuse the DB optimizer, don't fill BUKRS and GJAHR - this won't speed up your select in case index 4 is used, but might prevent the system to use index 4.
Regards,
Christian

Similar Messages

How to findout the clearning document number based on the reference

Hi all
we need to findout the clearning document number based on the reference number in financial transaction code.
basically we know how to retrieve the data from table level using BKPF without non primary key as XBLNR but
we want to know is this any function module to retrieve the document number based on the reference number like XBLNR.
Please confirm.
Thanks
K.Gunasekar

you can get it from BSAD too. but again its not a primary key

How to find the invoice number from accounting document number?

Hi
I am using the bapi BAPI_AP_ACC_GETSTATEMENT and trying to get the invoice numbers of all the payments.
but i am unable to find the link between the accounting document number from the bapi and the vendor invoice number.
i have tried the tables BSE_CLR, BSEG and BKPF. the field AWKEY in BKPF has the combination of BELNR & BUKRS & GJAHR when the document type is anything other than RE.
How can i get the invoice numbers from the accounting doc. numbers?
Regards
Sujai

I am unable to find the link between BKPF-BELNR and RBKP-BELNR from the bapi return values.
XBLNR is blank when i check the table.
the output of the bapi is something like this
COMP VENDOR   CLEAR_DATE CLR_DOC_NO ALLOC_NMBR   FISC   DOC_NO     ITE
                                                                                1000    1100 ........ ......................................... 20020123           2002 1900000202   002
1000    1100 ........ .........................................20020123           2002 1900000203   002
1000    1100........ .........................................20020123           2002 1900000204   002
1000    1100........ .........................................20020123           2002 1900000205   002
now i try passing the doc_no (1900000XXX) and the fiscal year (2002) and company code to BKPF
the XBLNR field is blank. This document number sequence doesn't seem to be the accounting document number of the invoice coz that starts with 51XXXXXXXXX.
If i try passing the number with sequence 51XXX... to BKPF i get the invoice number there in the AWKEY field.
I am not sure what this sequence (19___) represents.
Sujai
Edited by: Sujai S on Nov 5, 2008 7:22 PM
Edited by: Sujai S on Nov 5, 2008 7:22 PM

Excise No. using Accounting Document Number and the P.O. number

Hi All ! In my GL report, I'm displaying the Accounting Document Number and the P.O. number.
Now, the requirement is to display the excise no..
Tried different tables in SE11 using J_1EXC for excise detials, but to no avail.
And last which vendor to pick, Because vendors in P.O and BSEG differs.
If I use the BSEG-BELNR I get a different vendor & If I use the P.O. no. in EKKO then also I get a different vendor.
Please suggest.

Hi,
Actually the vendor in the accounting document and PO should match. If not look in table EKBE, It will have the accounting document or at least the invoice receipt against which accounting document would have been created. Check if the vendor number matches with the invoice receipt.
Regarding the excise number I'm not sure what you mean, If you mean excise invoice number, you can look at the J_1IEXCDTL
J_1IEXCHDR tables. You could check with FC on what basis the document is getting created to make out the relation ship. If it is vendor excise no etc. you can hit F1 help to find out the table etc.
Hope it helps.
Sujay

Need to find out the account group given the accounting document number

I am new to SAP. Please help.
Need to find out the account group given the accounting document number?

If you are asking about account assignment group then that can be seen in billing document -> Header -> Accounting Data.

Account Document Number Against the Purchase Order No.

Hi,
I have 2 queries in my report...
1..i want Account Document Number Against the Purchase Order No.
2..and Account Document Number Against the Invoice No.
Note:.. Account Document Number have the 55... series. foe ex. 5500017019...
Plz let me know in which table i can get it...
Thanks...

Hello Prince,
To find the GR no. against the FI doc number the tables involved will be BKPF, RSEG, EKBE.
Plz see the algorithm below for details:
1. Select the A/C'ing docno. from BKPF. For the FI docs selected, get the incoming invoice details from RSEG.
RSEG-BELNR = BKPF-AWKEY+0(10)
RSEG-GJAHR = BKPF-AWKEY+10(4)
Please note you can restrict the FI docs selections by using BKPF-AWTYP = 'RMRP'.
2. From RSEG you get the PO number (RSEG-EBELN) & then go to the PO History Table EKBE to get the GR number (EKBE-BELNR).
EKBE-EBELN = RSEG-EBELN
EKBE-EBELP = RSEG-EBELP.
Hope this is clear.
BR,
Suhas

How to find Invoice number linked to FI accounting document number ??

Hello All,
I have been looking around for all possible combinations to find the link between FI accounting document number (BSEG-BELNR) and Intercompany Invoice number (for which billing corr. to STOs' or POs' is done).
The requirement is that during ERS posting, we have accounting document numbers (BSEG-BELNR) and associated STOs' for this (BSEG-EBELN), but we are unable to map the Intercompany Billing Invoice number(s) (where the billing corr. to STOs' obtained from BSEG-EBELN) to this accounting document number (BSEG-BELNR).
Any pointers or detailed view solution would be of great help.
Thanks,
Ansh

Hello DPM,
Thank you for the descriptive help. But my requirement is to look for Intercomapny Billing number (VBRK-VBELN) linked to an accounting document number (BSEG-BELNR) and not Invoice Receipt Number.
The steps that I am following are:
From BSEG, found EBELN (Stock Transfer Order) and XREF3 (Reference Key, combination of fiscal yr., some ref. number, maybe GR no. and ref item no.), based on BELNR (Accounting document number).
From EKBE, found XBLNR (Reference Delivery Number or Direct Intercompany Billing Number on which GR is done) based on
EKBE - EBELN = BSEG - EBELN
EKBE - BELNR = BSEG - XREF3 (only ref and item no., considering it to be a GR no.)
EKBE - VGABE = '1' and EKBE - BEWTP = 'E'.
From VBRP, found VBELN (Intercompany Billing No., which is a desired number) based on
VBRP - AUBEL = EKBE -EBELN (Stock Transfer Order)
VBRP - VGBEL = EKBE - XBLNR (Delivery number)
Here, I am not sure about 2 things:
Whether the reference no in BSEG-XREF3 will always be Goods Receipt number for Stock Transfer Order or not. If not, then what it can be and how I will have to proceed further then.
Secondly, If in case for an accounting document number, I have 2 Stock Transfer orders (BSEG - EBELN) and same reference number (BSEG-XREF3), then from History table (EKBE) I get only single delivery based on which GR was doen for both STOs', then I shall be getting single Intercompany Billing Invoice from VBRP or different ?
Kindly provide your inputs.
Thanks,
Ansh

How to fetch accounting document number from known material document number

Hi,
Using MIGO transaction, by giving mblnr(material document number) as input, I get accounting document number by clicking FI document.I have to add this accounting document number in my report for corresponding known mblnr(material document number) values.
My question is how to fetch the accounting document number present in MIGO to add in my report program.
I used the xblnr(Reference Document Number) which is present both in mkpf and bkpf tables to fetch values.
I extracted xblnr values with known mblnr values from mkpf (Header: Material Document table).
and then extracted belnr(accounting document number) from bkpf (Accounting Document Header table) by using xblnr values.
But the query is running for a long time.
Is there any other method to extract the values in a simpler way.
Kindly advise.
Thanks and Regards,
Sanjeev

I had the values of xblnr and some other fields such as mblnr, budat etc in wi_item table.
I created a new internal table i_xblnr and got down those values.
And then created a new internal table i_belnr and tried to get values of belnr in it.
The code I wrote is given below:
IF not wi_item[] is initial.
loop at wi_item.
   at new xblnr.
    ws_xblnr-xblnr = wi_item-xblnr.
     append ws_xblnr to i_xblnr.
   endat.
endloop.
select belnr xblnr from bkpf into table i_belnr for all entries in i_xblnr where xblnr = i_xblnr-xblnr.
ENDIF.
Kindly look after it.Thank you.
Regards,
Sanjeev

Invoice & Accounting Document Number

Dear Experts,
We are facing number range problem. When we are saveing an invoice then Invoice number and accounting document number showing different. It should come same number. Can you pls advice why this is happening and how I can resolve this issue.
Thanks in advance for your kind support.
Best Regards.
Ripon Kumar Paul

Dear Ripon,
Please check the below which will help you achieve same document number:
SAP gives you customizing options to make both document numbers the same. The solution lies in the number range assignment of the MM and FI document. You need to configure the MM document number assignment as internal and external for the FI documents. (FI documents are set up with external-assigned numbering, while the MM document has internal, or system-generated, numbering.) In this case, the MM document number is passed on to the FI document, which means that the number of the FI document is identical to the MM document.
Because the document number assignment in MM is not company code-specific, in contrast to the FI document, you need to take the following points into consideration before using external document number assignments for FI documents. They have the following effects on your system:
Continuous number assignments for FI documents are not guaranteed, especially if you have more than one company code.
The document number ranges in MM and FI have to be the same for all company codes.
In Release 4.6C, you need to use internal number assignments for revaluation documents, invoice reduction documents, Evaluated Receipt Settlement (ERS) postings, or reversal documents. There are no restrictions as of SAP Enterprise 4.70.
Use a different number range assignment for FI invoice posting (FB60), because FI invoice postings usually use internal number range assignments and the postings originate in FI, not MM.
If you use document parking and the number range intervals are fiscal year-dependent, you cannot change the posting date of the document if the fiscal year is different to that determined for the previous posting date. In this case you have to delete the document and re-enter it. There are no restrictions for fiscal year-independent number ranges.
What do you do if you have already posted thousands of invoices in your system and the numbers are already different? In this case, you need to find unused number range intervals in MM and FI. Since most companies do not change the SAP standard delivered number ranges during the original implementation, number range interval 52 is usually available in MM and FI.
Now let's look at the detailed customizing steps. With the following customizing steps, you can align the MM and FI document numbers going forward only. No fix is available for invoices already posted in your system, since SAP does not allow the change of document numbers.
Step 1. Maintain FI document number range. Use transaction OMR4 and go to Number range for document types in FI. Select the company code for which you want to create the new number range interval and click on the change interval button. Insert a new document number range by clicking on the insert interval button on top of the screen. In this example, I created number range interval 52 with the document numbers 5200000000 u2013 5299999999. Don't forget to set the external number range check box (Ext).
Step 2. Assign FI number range to FI document types. The second step is to assign the number range created in step 1 to the FI document type for invoices. Again use transaction OMR4 and go to Document type. Double-click on the document type, which you are using for LIV invoices. In my example, I used the SAP standard document type RE. In the number range field, assign the new number range interval 52.
Thanks!!!
Murlidhar Khatri

Link to find Accounting document number from Material document number / PO

Hi
We are working on a custom report, in which we need to print purchasing details (from EKPO, EKKO & EKBE) as well as accounting details (from BSEG & BKPF). We need to hit BKPF/BSEG with the accounting document number, since it is the only key field (though PO number is there in BKPF, we can not use this because it is not a key field)
My question from which table we get the accounting document number ? We need to provide a link between purchasing & accounting through accounting document number, but how to find the accounting document number. ?
Thanks
Venkat.

Venkat,
I guess you are trying to fetch Accouting Documents for goods receipt against PO.
To do this, you need to look at the PO History table (EKBE) and find out the Corresponding material document (VGABE = 1 for good receipt).
Get the value of BELNR and GJAHR.
Concatenate BELNR and GJAHR into your refernce key (like BKPF-AWKEY).
Then use this key to read table BKPF with the following key
   AWTYP = 'MKPF' for Material document
   AWKEY = reference key generated above.
   AWSYS = the value of the logical system (if used) or blanks
This will get you quicker access as compared to what you've described below. In this case, the system uses a standard SAP Index "Index by application type and key" to fetch the relevant records.
Hope this helps.

G/L Account number using accounting document number...

Hi,
How do I find the G/L Account number with the help of Accounting Document number (BELNR) ?
-Rajesh

HI,
Use tables BSAS,BSIS and pass the docuemnt number you will get the GL account.
Thanks
Mahesh
Message was edited by:
I Can Solve It

Link between billing document and accounting document number

Hi Frnds,
When i receive a partial receipt (of an invoice) from a customer using f-28, i am getting the link between invoice number and accounting document number from a table (BSEG), but when i am receiving the final settlement amount from the customer, i m not getting the link between the inv. no. and accounting document number. Can anyone tell me how can i get the same?
I have tried table BSAD and BSID.

Hi,
I will give you two options.
1)Goto FBL5n.Enter your customer number and company code.Select All items.
Execute.
Search for your billing document number using CTRL+F.Select that line.Click on display.
Here you will find the reference number and clearing document number also.
2)Goto VF02.
Enter your billing document number.Enter.
Press Shift+F4 or the path is:goto-->Accounting document.
You will get the accounting document number here.
3)Goto FB03.Key in the document number.Enter.
Regards,
Krishna.

For BSID- Accounting Document Number corresponding PO Number is required

Hi Gurus,
             I have got a requirement to develop a report similiar to 'FBL5N' . I am getting the details of open and cleared items of a customer from BSID and BSAD tables respectively. My requirement is also to fetch the corresponding PO number of the LINE items displayed in the report.
            Can any one suggest how can I fetch PO number with Accounting document number(BSID-BELNR) or (BSAD-BELNR).
           Your efforts in this matter are deeply appreciated and <<removed_by_moderator>>.
Thanking You,
ZIa.
Edited by: Vijay Babu Dudla on Jan 28, 2009 11:07 PM

If you have fields BSID-VBEL2 and BSID-VPOS2 are populated with the sales order, than access VBKD with the Sales Order to get the Customer PO (VBKD-BSTKD)
Or
First, You need to get the Billing document. Access BKPF with the BSID-BELNR to get the AWKEY where AWTYP = 'VBRK'
Now, you can go to SD document flow with the billing document to find out the Sales Document. Access VBKD with the Sales document to get the Customer PO
Regards,
Naimesh Patel

Report with Invoice and Accounting Document Number

Dear Experts,
Here i have a requirement.
I wanna a report which gives a Invoice (MIRO) and its accounting documents (Follow on document) in one page. Because If I view a MIRO document, for checking the accounting document, I need to click on Follow on doc, then I'll get.
But If wanna see for 1000 MIRO documents with accounting document number, then I don't want to click 1000 times to see the account doc for respective Invoice number.
The approximate format is,
Column 1                              Column 2     Column 3        .......................              Column n
MIRO (Invoice number)                             Accountting Doc Number
5100000099                                              5100000011
Which tcode will give the both in one screen?
Thanks in advance
Regards,
navahsek

Hi,
Enter Sork Key 002 for Vendor Master Record.
and also you can check the Report in ECC 6.0
MIR5 - Display List of Invoice Documents
There you select Export Mode --> Display Accounting Document Number.
You can get Report FI and MM Document Numbers.
Hope It will Clear.
Regards,
Kishore

Link between Material Document number & Accounting document number

Hi All,
For material document there is a corresponding accounting document number generated.However this is not the rule in all cases.
Where is the link between the two(Material Document & Accounting Document) ?
In other words i want to list those material documents only, for which accounting documents are generated.
Regards
Piyush Kothari

STEP 1
SAP query way to extract your information.
Create an infoset SQ02 with a single table MKPF. (include key fields in the field group)
Step 2
From Extras
Create an additional field called zawkey (like bkpf-belnr) which will concatenate the MM document number MKPF-MBLNR and MKPF_MJAHR. The sequencing shall be number 1.
You may use this code below and paste also (this needs authorization as well)
data: zzawkey like bkpf-awkey.
clear: zawkey, zzawkey.
concatenate mkpf-mblnr mkpf-mjahr into zzawkey.
zawkey = zzawkey.
Add another field called ACCDOCNO (accounting documnet number) with sequencing number 2 with following code.
data: zaccdocno like bkpf-belnr..
clear: zaccdocno, accdocno.
select belnr from bkpf into zaccdocno where
bukrs = ccode and
GJAHR = MKPF-MJAHR and
awkey = zawkey.
endselect.
accdocno = zaccdocno.
Step 3
Include the additional fields into the field group.
Step 4
Click on the selection tab and create a parameter called ccode with a description Company Code and against
LIKE BKPF-BUKRS
Extras OBLIGATORY
Step 5
Click on the selection tab and create a seelction criteria pdate with a description Posting Date for the field MKPF-BUDAT
Extras OBLIGATORY
Step 6
Save, Generate and assign the infoset to a user group.
Step 6
Create a SQ01 query under the usergroup with all the fields in the infoset. and Execute. Enter a company code and one date of a working day where you expect material transactions.
The result will be all the material documents and their corresponding accounting documents, if available. If you want to see only those material document that do not have corrsponding accounting documnet, then while you are in the selection screen say accounting document number is not equal to blank.

Reteiving Accounting Document number by passing the reference key

Similar Messages

Maybe you are looking for