Retrieve GSM cell info

Is it possible to retrieve the current GSM cell info with a MIDP application running on a mobile phone?
As a reference, take a look at miniGPS that runs as a native Symbian application (http://www.psiloc.com/?id=prod&nrp=44)

Regarding the discussion you have some time ago... I have never programmed a midlet but on the other hand I would like to develop a midlet that retrieves handset information and displays it in a way such as the "old" Nokia net monitor (the locked menu). The mobile is not a GPS device, but performs or receives an number of measurements or newtork paramaters such as the signal strength, the signal quality, the timing advance, BCCHs lists, offset values etc. I would like to know if we can have access to this information (through the Location API?) in order to process and display it accordingly as it is very difficult or impossible to find an midlet application that acts like a "network monitor". For example, the mobile displays the signal strength in the form of five bars. Hence, it is already capable of processing the measured in dBm signal strength value. Is there any news about that functionality during this year?

Similar Messages

  • Using Cell Info Display in MIDlets

    How can I access the " Cell Info Display " provided by GSM service provider from our MIDlets to get some location idea from Nokia Series 40 or 60 Mobile Handsets ?
    Without using Locational API's, is their any Native mathods aceesable for this, provided by any Nokia ?

    Well, that's a very popular question.
    What i have found until today is summarized below.
    1-) No, there are no methods for getting Cell ID or Local Area Network. Most provider's don't provide it (intentionally). Some Motorola phones accept a call like System.getProperty("phone.cid") or System.getProperty("Siemens.CID")
    2-) I suggest you use C++ if your phone supports symbian. There is not a standar way, but using etelcom Apis you can get the Network information.
    Look for more details on official nokia forums.
    3-) Good luck, and tell me if you could manage to finish your app.

  • Cell Info Display option in iPhone

    Hi, I am using iPhone 5. I need to know that 'do we have an option to Display Cell Info like we do have in Nokia handsets'. This will display the real time tower location info on the screen. This information should be displayed everytime handsoff occurs and this should work without opening any external installed app. Thanks.

    09-Sep-2008 04:21 AM
    engshiraj wrote:
    Thank you it_is_me!
    What you had written is correct, when selected GSM only it displays the cell info.
    However, in Sri Lanka, where I live, the operators are using GSM and UMTS in a complementary fashion that when you put on to dual mode the coverage is high.
    I am subscribing to two operators, Dialog and Mobitel. In the Dialog network even if you put to dual mode it displays the cell info. This happenedwith Mobitel network only.
    Anyway, thank you very much for the information.
    You are welcome , also bear in mind that cell info display that can be activated in E71 is not only 3G , it's 3.5G and this could make difference when it comes to network services .
    citation needed .

  • Help! I synced my iCal from my old iPhone to iCloud. It worked great. I've done this because I'm switching to a Samsung phone and need to sync my iCal to my Google calendar. In attempting to do so today, my iCal is empty. How can I retrieve my iCal info??

    Help! I synced my iCal from my old iPhone to iCloud. It worked great. I've done this because I'm switching to a Samsung phone and need to sync my iCal to my Google calendar. In attempting to do so today, my iCal is empty. How can I retrieve my iCal info??

    This was EXACTLY what I needed about the purchases I made from my device. However, is there a way to re-download other ones you've made from a computer? Because I realized some of them were not just purchased from my device.
    This is a picture of what it looks like now:
    http://tinypic.com/r/107quxu/7
    As you can see, the stuff circled in red doesn't give me an option to download from Cloud Beta because it already says "downloaded".
    any way to get around that?

  • Cell Info Display Problem

    Past 2 days , my Nokia N71 cell info display gets stuck only showing one area or doesn't show at all, even though moving to another area doesn't change. To update cell info display i need to restart my phone or i need to go settings then i select cell info display then change to off then again on. But i have also Nokia 5700 XM but it doesn't face the same problem and it is also subscribed to same network as n71.
    my N71 fimware is V 2.0642.1.05
    Please someone give the solution to the problem.
    Best Regards

    Hi Yogeshwar,
    The Cell info display now a days displays only some Offers that are dished out by the Operator. Once upon a time it was showing the AREA where you are but thats no more there I think. Not atleast on the Vodafone network in India. And its the same on all handsets, not only Nokia X1-01. Recently I had contacted Vodafone in this regard and was told that the duration for which the info is flashed can not be increased.
    As for the signal problem hope that the Antenna is not covered by any other object.. Refer Pg.No. 7 of the User_Guide ...Else you may have to get the phone inspected by Nokia Care...

  • To get selected cell info in table for WDA.

    i'm developping in netweaver2004s.
    a view has a table and a button.
    another view has input fields.
    i want to get cell info(selected field name not value)
    so i use that info in another view.
    i want to know same command 'GET CURSOR' in WDA.
    please let me know that method.

    Hi,
    You can specify the importing parameter ID as type string in the action handler of the button. It will contain the ID of the button.
    Best regards,
    Thomas

  • How to switch off 'Cell Info' in Lumia 925

    I recently bought Lumia 925. I am getting constsnt messages pertaining to 'Cell Info'. They keep on appearing once in every few seconds & pile up in a huge number. You can not make a call unless you acknowledge all of them, which takes huge time, alternatively I have to switch the phone off & on & make a call after re-boot!!
    I was using Nokia E 63 earlier. It had a setting facility for 'Cell Info' on or off. I do not find any setting facility for 'Cell Info' in Lumia 925.
    Please guide me how to set the Cell Info off, or I will have to discard this Lumia 925

    Thanks everybody for the suggestions!
    a) I tried with SIM of other service provider : There were no troublesome flash messages. b) I contacted my service provider: Airtel: After trying for tremendous patience with support number 121, somehow I could convey the message about what was happening. My call was transferred to a senior person, who promised me that these 'Flash' messages would stop in half an hour. It did not happen. Once again through 121, once again the promises, nothing happens. I personally visited Airtel support centre. Again nothing happens. c) I tried my old E 63 & switched off Cell Info with the same SIM. I am not able to use Lumia 925 because of Flash messages accumulating every few seconds.
    Conclusions: I have to change my service provider Or Phone Or Both. – Now I may go for the last option with frustrations.

  • How do i retrieve all my info, photos, numbers that were on my phone. it was all lost when i plugged my phone in to update it...it began to sync then next thing i know everything was gone after the date of 8/2011

    how do i retrieve all my info, photos, numbers, notes that were on my phone prior to my plugging it into my computer to update it?...it started to sync with itunes and when it was finished. everything from 8/2011 to current was gone. Please help!

    http://support.apple.com/kb/HT1766?viewlocale=en_US&locale=en_US
    Go to Settings>General>Reset and tap Erase All Content and Settings.  This will erase your phone.  Then you will go through the setup screens again as you did when your phone is new, and when given the option, select Restore from iCloud Backup.

  • Updated to iOS 5.1.1 and lost all contacts, messages, and photos specific to this iPhone.  Is there anything to retrieve the lost info?

    Updated software to iOS 5.1.1 and lost all contacts, messages, and photos specific to this iPhone.  Is there any way to retrieve the lost info?

    if you don't have a backup on iclouds or itunes that you can restore to, then all is gone.  http://support.apple.com/kb/HT1766

  • How to get the cell info?

    You all know that, on our mobile we used to get the cell info ( Tower Name ). How to access that in our J2ME application?
    John

    Hello txflwr48! I regret the difficulties you've been having while activating your new phone. I'd love to help, but I recommend that we take our conversation to direct message instead of here in the public forum. If you have not yet gotten your device activated, please follow these steps to follow my handle (DionM_VZW) send me a direct message: http://vz.to/1gBiqkv
    DionM_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • Getting cell info via a J2ME application

    Hi All,
    I want to get the cell info i.e. Location String of the BTS, that gets displayed on the mobile phone. Is there any method by which I can get this information in to my J2ME application.
    Regards,
    Ashish

    Just a guess, as I didn't try it yet. But I'm interested on the subject myself, and I think you need the Location API. Try googling for "j2me location api" or take a look at this:
    http://www.lbszone.com/index2.php?option=com_content&do_pdf=1&id=176

  • Cell info display on Nokia 701

             Hi every body, My Nokia 701 is not displaying cell info i.e name of area or name of tower covering my phone even though I set info display to on in pull down notification menu right from time of purchase. Is this problem specific to my phone. My old phone Nokia X3-00 was showing cell info with 2G sim. Now I am having 3G sim inserted into my phone 701. But cell info display is off either with 2G or 3G coverage. 

    I jsut checked it on my c3 00 with vodafone and it started showing some special offers on home screen.
    But I tried the same on my 701 with aircel and it doesn't show any of that.
    -------------------If this post helped you, click on accept as solution.------------------
    -----------------------------Appreciate by clicking on white star.----------------------------

  • How do I retrieve my backup info after my phone is stolen

    how do I retrieve my backup info after phone is stolen

    What info?
    You should be syncing calendars and contacts with your computer regularly.  They will be in whatever program that you sync.
    You should be importing all pics talen with iphone to your computer regularly as you would with any digital camera.  They will be wherever you put them.
    You should be transferring any itunes purchases made on your iphone to your computer regularly.  They should be in itunes.
    You can redownload some itunes purchases in some countries:
    http://support.apple.com/kb/HT2519

  • Nokia X1-01 Cell Info Display Problem

    My X1-01 sw version 05.27 ,26-05-11,RM -713, Language: MG
    The problem is that it does not display Cell Info display correctly. Only few times it shows, But only for sometime. Is this bug fixed in the latest version 5.44 ???? and it also has the signal problem .. If i put it in my pocket , the whole signal goes away in both sims.... 

    Hi Yogeshwar,
    The Cell info display now a days displays only some Offers that are dished out by the Operator. Once upon a time it was showing the AREA where you are but thats no more there I think. Not atleast on the Vodafone network in India. And its the same on all handsets, not only Nokia X1-01. Recently I had contacted Vodafone in this regard and was told that the duration for which the info is flashed can not be increased.
    As for the signal problem hope that the Antenna is not covered by any other object.. Refer Pg.No. 7 of the User_Guide ...Else you may have to get the phone inspected by Nokia Care...

  • I'm got replacement 5c, how do I retrieve all my info from the cloud?

    i had to get a replacement due to dropping my orginal 5c, I was able to retrieve all my info from the clould from an older model 4c , however I haven't been able retrieve all my info from the original 5c how can I can retrieve it to my current replacement from the cloud?

    Hello vejames,
    Thanks for using Apple Support Communities.
    If you need to restore your replaced iPhone from either an iTunes or iCloud backup then you can follow the directions in the article below to help walk you through the process.
    Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
    Cheers,
    Alex H.

Maybe you are looking for

  • Parameters and database login with Web Services SDK

    I need to know how to do the two most common report tasks through the Web Services interface to Crystal Reports Server 2008: How do I get a list of a report's parameters and set the parameter's values? How do I set the database login information? I h

  • File naming after capturing video from a firewire camera

    Quicktime by default saves my files in a specified folder and names them movie1, movie2, movie3, etc... How can I use a name that is different for each video?. I do about 300 at a time and don't have much time between video captures. Is there anyway

  • Editing web page in Dreamweaver 6.1

    I use Dreamweaver 6.1 and have done for 5 years. Now, whenever I edit an html page by keying text, or by copying, ie a paragraph, to the page, the code view changes it all to one word per line and in some instances spacing 5 to 10 lines between each

  • What to do if iTunes card rejected for wrong number but it is the right number?

    iTunes store rejects the security number of my new Visa debit card.  "Please used a valid #"  But the number I gave is the only number.  what to do?

  • Activating CS3 Design Premium

    I have moved CS3 Design Premium from an XP machine to a Windows 7 Machine. I cannot activate it because it says there are too many activations. I was unable to deactivate on the old XP machine as it never gave me the option. What do I need to do to b