Retrieving data from a "varchar(4000)" field w/ JDBC
I'm using the Oracle thin JDBC drivers w/ the 1.1.8 JDK. In the past when needing to access "LONG" fields with over 2000 bytes of data I used the "rs.getAsciiStream(xx)" method and read the data from the STREAM. A later version of the thin drivers allowed me to use the straight-forward method of "rs.getString(xx)" and it would return all of the data.
I'm now trying to access an ORACLE database (NT, 8.0.5) with a field defined as "varchar(4000)". Using either of the retrieval methods [getString(), getAsciiStream()], I only get 2000 bytes of data, which is not acceptable. I ran into the same problem when I used the 1.2.2 JDK.
I finally downloaded the thin drivers for ORACLE 8.1.6, and they seem to work against the 1.2.2 JDK, and the ORACLE 8.1.5 drivers work with the 1.1.7 JDK.
My question is, can I "safely" use the 8.1.6 drivers against an 8.0.5 database? If not, is there another way of pulling the data out? [I tried using the "defineColumnType" to "LONGVARCHAR" and that didn't work either].
Any help would be appreciated.
Wayne Johnson
[email protected]
Hi,
I entered the SQL statement in transaction MDXTest but it is running since 7 minutes.
>> Transaction MDXTEST has an option to generate a test sequence and is not there to test SQL statements. You need to enter a valid MDX statement.
Function module "/Crystal/MDX_GET_STREAM_INFO" not found
>> then I would suggest you make sure that all the Transports from the SAP Integration Kit have been properly imported - see the Installation Guide for the SAP Integration Kit for details.
Ingo
Similar Messages
-
How to store bit data in VARCHAR(4000) field?
Hi.
Please help!
We are porting some C/C++ software with embedded SQLs from NT/DB2 to Linux/Oracle.
On NT/DB2 we have some table to store file data in a VARCHAR(4000) blocks.
Table looks like this
CREATE TABLE FileData (filetime as timestamp not null, idx int not null, datablock varchar(4000) FOR BIT DATA not null, primary key (filetime, idx) );
As you can see DB2 has appropriate field modifier - "FOR BIT DATA" which makes DB2 storing data as-is, not converting characters.
I need to know - if it is possible to do the same in Oracle like in DB2?
If Oracle has some kind of field modifier like "FOR BIT DATA" in DB2?
If not, how can I do the same in Oracle?
The current problems are:
1) when application imports the file with some national chars the Oracle stores "?" in a database in place of national chars.
2) another piece of a problem - if file is more than 4000 bytes length, it reports the ORA-01461 error (see it is trying to expand some chars to UTF8 char which is not fit a single char, so finally - not fit the field size).
So, it seems that it cannot proceed national chars at all. :-\
For details please see enclosed [C code|http://dmitry-bond.spaces.live.com/blog/cns!D4095215C101CECE!1606.entry] , there is example how data written to a table.
In other places we also need to read data from FIELDATA table and store back to file (other filename, other location).
Here is summary on a field-datatype variants I have tried for the "datablock" field:
1) VARCHAR2, RAW, LONG RAW, BLOB - does not work! All reports the same error - ORA-01461.
2) CLOB, LONG - both working fine but(!) both still returns "?" instead of national chars on data reading.
Hint: how I did try these field types - I just drop the "FileData" table, created it using different type for "datablock" field and run the same application to test it.
I think I need to explain what the problem - we do not provide direct access to Oracle database, we use a some middle-ware. Middle-ware is a C/C++ software which also has a interface for dynamic SQLs execution. So, exactly this middle-ware (which is typically running on the same server with Oracle) receives the "?" instead of national chars! But we need it to return all data AS-IS(!) without any changes!!! That is wjhy I did ask - if Oracle has any options to store byte-data as-is?
The BIG QUESTION - HOW CAN WE DO THIS?!
Another thing I need to explain - it is ok to use Oracle-specific SQL ONLY IF THERE IS REALLY NO WAY TO ACHIEVE THIS WITH STANDARD SQL! Please.
So, please look on a C code (by link I have posted above) and tell - if it is possible to make working in Oracle the VARCHAR approach we using at the moment?
If not - please describe what options do we have for Oracle?
Regards,
Dmitry.
PS. it is Oracle 11gR2 on CentOS 5.4, all stuff installed with default settings, so Oracle db encoding is "AL32UTF8".
C/C++ application is built as ANSI/ASCII application (non-unicode), so sizeof(char)=1.
The target Oracle db (I mean - the one which will be used on customer site) is Oracle 10g. So, solution need to be working on Oracle 10g.P. Forstmann wrote:
There is some contradiction in your requirements:
- if you want to store data as is without any translation use RAW or BLOB
- if you want to store national character data try to use NVARCHAR2 or NCLOB.Seems you did not understand the problem. Ok, I'll try to explain. Please look on the code sample I provided in original question
(I just added expanded data structures there, sorry I forgot to publish them when post original question):
EXEC SQL BEGIN DECLARE SECTION;
struct {
char timestamp[27];
char station[17];
char filename[33];
char task[17];
char orderno[17];
long filelen;
gFilehead;
struct {
char timestamp[27];
long idx;
struct {
short len;
char arr[4001];
} datablock;
gFiledata;
EXEC SQL END DECLARE SECTION;
#define DATABLOCKSIZE 4000
#ifdef __ORACLE
#define VARCHAR_VAL(vch) vch.arr
#elif __DB2
#endif
short dbWriteFile( char *databytes, long datalen )
short nRc;
long movecount;
long offset = 0;
gFilehead.filelen = gFilehead.filelen + datalen;
while ((datalen + gFiledata.datablock.len) >= DATABLOCKSIZE)
movecount = DATABLOCKSIZE - gFiledata.datablock.len;
memcpy(&VARCHAR_VAL(gFiledata.datablock)[gFiledata.datablock.len], databytes, movecount);
gFiledata.datablock.len = (short)(gFiledata.datablock.len + movecount);
exec sql insert into filedata (recvtime, idx, datablock)
values(
:gFiledata.recvtime type as timestamp,
:gFiledata.idx,
:gFiledata.datablock /* <--- ORA-01461 appears here */
nRc = sqlcode;
switch (nRc)
case SQLERR_OK: break;
default:
LogError(ERR_INSERT, "filedata", IntToStr(nRc), LOG_END);
exit(EXIT_FAILURE);
offset = offset + movecount;
datalen = datalen - movecount;
gFiledata.idx = gFiledata.idx + 1;
memset(&gFiledata.datablock, 0, sizeof(gFiledata.datablock));
databytes = databytes + movecount;
gFiledata.datablock.len = 0;
if (datalen + gFiledata.datablock.len)
memcpy(&VARCHAR_VAL(gFiledata.datablock)[gFiledata.datablock.len], databytes, datalen);
gFiledata.datablock.len = (short)(gFiledata.datablock.len + datalen);
return 0;
}So, the thing we need is - to put some data into the "datablock" field of following structure:
struct {
char timestamp[27];
long idx;
struct {
short len;
char arr[4001];
} datablock;
gFiledata;Then insert it into a database table using static SQL like this:
exec sql insert into filedata (recvtime, idx, datablock)
values(
:gFiledata.recvtime type as timestamp,
:gFiledata.idx,
:gFiledata.datablock /* <--- ORA-01461 appears here */
); And then expect to read exactly the same data back!
The problems are:
1) Oracle make decision to convert the data we are inserting (why? and how to disable converting?!)
2) even if it inserts the data (CLOB and LONG field datatypes are working fine when inserting data with such static SQL + such host variable) then it became not readable! (why?! how to make it readable?!)
P. Forstmann wrote:
ORA-01461 could mean that you have a wrong data type for bind variable variable in your client code:Not me decided that host variable is the "LONG datatype value" - the Oracle make that decision instead of me. And that is the problem!
Looks like Oracle react on any char code >= 0x80.
So, assume if I run the code:
// if Tab1 was created as "CREATE TABLE Tab1 (value VARCHAR(5))" then
char szData[10] = "\x41\x81\x82\x83\x84";
EXEC SQL INSERT INTO Tab1 (value) VALUES (:szData);
Oracle will report the ORA-01461 error!
EXACTLY THIS IS THE PROBLEM I HAVE DESCRIBED IN MY ORIGINAL QUESTION.
So, problem - why Oracle make such decision instead of me?! How we can make Oracle insert data into a table AS-IS?
What other type of host variable we should use to make Oracle think that data is a binary?
void*? unsigned char? Could you please provide any examples?
Ok, you did recommend - "use the RAW datatype". But RAW datatype is limited to size 2000 bytes only - we need 4000! So, it is not match our needs at all.
Also you have mentioned "use BLOB" - but testing shows that Oracle reports the same ORA-01461 error on inserting data into a BLOB field from such host variable! (see the code I posted)
What also we can do?
Change type of host variables? BUT HOW?! -
How to retrieve data from a field of CLOB datatype?
How can I retrieve data from a field of CLOB datatype in Oracle
8 being called from an ASP or VB application? The recordset
object in ASP or VB doesn't support the CLOB datatype.
Thank you in advance for your help.How can I retrieve data from a field of CLOB datatype in Oracle
8 being called from an ASP or VB application? The recordset
object in ASP or VB doesn't support the CLOB datatype.
Thank you in advance for your help. Hello.. were you able to solve your problem? I'm faced with pretty much the same task.. I have a VBA application that needs to pull various pieces of data(CLOBs, BLOBs, etc..) from an Oracle8i db. -
Help with writing and retrieving data from a table field with type "LCHR"
Hi Experts,
I need help with writing and reading data from a database table field which has a type of "LCHR". I have given an example of the original code but don't know what to change it to in order to fix it and still read in the original data that's stored in the LCHR field.
Basically we have two Function modules, one that saves list data to a database table and one that reads in this data. Both Function modules have an identicle table which has an array of fields from type INT4, CHAR, and type P. The INT4 field is the first one.
Incidentally this worked in the 4.7 non-unicode system but is now dumping in the new ECC6 Unicode system.
Thanks in advance,
C
SAVING THE LIST DATA TO DB
DATA: L_WA(800).
LOOP AT T_TAB into L_WA.
ZDBTAB-DATALEN = STRLEN( L_WA ).
MOVE: L_WA to ZDBTAB-RAWDATA.
ZDBTAB-LINENUM = SY-TABIX.
INSERT ZDBTAB.
READING THE DATA FROM DB
DATA: BEGIN OF T_DATA,
SEQNR type ZDBTAB-LINENUM,
DATA type ZDBTAB-RAWDATA,
END OF T_TAB.
Select the data.
SELECT linenum rawdata from ZDBTAB into table T_DATA
WHERE repid = w_repname
AND rundate = w_rundate
ORDER BY linenum.
Populate calling Internal Table.
LOOP AT T-DATA.
APPEND T_DATA to T_TAB.
ENDLOOP.Hi Anuj,
The unicode flag is active.
When I run our report and then to try and save the list data a dump is happening at the following point
LOOP AT T_TAB into L_WA.
As I say, T_TAB consists of different fields and field types whereas L_WA is CHAR 800. The dump mentions UC_OBJECTS_NOT_CONVERTIBLE
When I try to load a saved list the dump is happening at the following point
APPEND T_DATA-RAWDATA to T_TAB.
T_DATA-RAWDATA is type LCHR and T_TAB consists of different fields and field types.
In both examples the dumps mention UC_OBJECTS_NOT_CONVERTIBLE
Regards
C -
Problem with concatenated data store and VACHAR(4000) field
Have a concatenated data store built from 18 columns in one table. The main column for the index is a VARCHAR(4000) field. When we insert more than 3215 characters in that field the row disappers from the index, 3215 characters or less works fine.
Anyone know why?hi,
If you want to display them in an input field you will need to use expression box and use the formula as store@datastorefield.
if you want to display in the Plain text go to the display tab in the properties of plain text and use the same formula here, in plain text you can only display the values present in the datastore.
Regards,
Rk. -
Query Report:To Retrieve Data from A/R Invoice and A/P Invoice
Hii Experts,
I am a new Sap B1 Trainee.I am facing a problem when retrieving data from A/R Invoice and A/P Invoice in order to track
Expenditure and Revenue according to a Bussiness partner,
I am using union to retrieve the information,but it is saying a error that Error Converting Varchar to Numeric and also
i would like to know how can i show the total final payment by reflecting Downpayments in A/R Invoice and A/P Invoice
With Regards
Cherry.Hii.
My Sap B1 version is 8.8.1 and patch level is 20. Actully i need a scenario where i can able to show both Expenditure and Revenue of a particular bussiness partner and profit/loss in a single query report.
I need some tips regarding this,When i am doing union i am getting conversion error converting varchar to numeric when i take
Sum(Line Total) from OINV and Sum(line total) OPCH group by docdate and docentry and BP .
and another scenario is how to deduct A/P downpayment or A/R downpayment from A/P invoices and A/R invoice to get the final Revenue and Expenditure ..
Thanks & Regards
Cherry -
Retrieve data from a synonym in oracle database through db connect
Hi Everyone,
I have created certain synonym for some tables in oracle. I want to retrieve data from it through db connect but where through source system and then selecting database tables, only tables and views are available.
Synonyms are not available to create data sources and retrieve the data from it. Why is it so. Is this a limitation of db connect.
Can anyone please let me know about it.
Thanks,
Joshua.Hi,
You want to import data from an external Oracle database into your BW 3.X. To do this, you can connect the external database to the BW 3.X release as a source system using the external database connect. BW 3.X here represents BW 3.0, BW 3.1 and BW 3.5 because in other (DB relevant) parts, all 3 versions are based on the same source code.
General information
The above function allows you to load data from an external Oracle database (not a BW database) into your BW 3.0 system.
There may also be constellations which cannot be used directly through the DB Connect access. However, it should be possible to find an adequate, customer-specific solution for most of these scenarios.
In such situations, the resulting work falls into the area of Consulting and cannot be handled via Support.
Successful implementation of a connection requires corresponding expertise and experience in the use of the source database in the areas:
- Tools
- SQL syntax
- DB-specific functions
Corresponding knowledge of the source application is also required to ensure that semantically relevant data arrives in the BW system.
Procedure
You should execute the following steps to connect the source system (Q) to the BW system (BW):
Installing the client software on an BW application server
Of course, you only need to install the client software if you are using BW with a non-Oracle database.
Use the Oracle setup program on the database CD (runInstaller on Unix) to start the OracleInstaller. Follow the program instructions and the DB installation instructions to install the Oracle Client software on BW.
Testing connection setup from BW to Q
After you install the client software on BW, try to set up a connection from BW to the server on Q. You may need to adjust the tnsnames.ora or sqlnet.ora files for this, to introduce the Oracle systems (to which contact should be made) to BW. You can test the connection by executing the command "tnsping QDB" on BW to check whether the client has established contact to the QDB database on the Q system.
Creating a separate U user in Q
We recommend that you create a separate U user in Q for connection to BW. This means that authorization and administration questions can be solved centrally.
Displaying data sources in Q for the U user
To provide U data for users other than U, you can create views on other user tables as user U:
CREATE OR REPLACE VIEW viewname AS
SELECT * FROM QDB.tablename
You may have to grant SELECT privileges to user U in the QDB schema:
GRANT select ON QDB.tablename TO U
Of course, you can also restrict or reformat data in the view arrangement (for example, change from internal date format into the SAP date format). JOIN operations using several tables are also available.
!!! Synonyms do not yet work!!!
Synonyms that you can create as described below are another option for providing a complete table for the user U:
CREATE SYNONYM synoname FOR QDB.tablename
!!! Synonyms do not (yet) work!!!
After you have displayed the require data for user U, you can simply use
SELECT * FROM <view or table>
on the Q system to check which data is returned.
You can now open a link to Q as user U in the BW system with SQLPLUS and check, using the same SELECT, whether this data is also seen in the Oracle client. If this is not the case, there is probably a connection problem.
Creating a connection from BW to Q in BW
Including data sources of user U user in Q in BW.
Solution
Supported BW, Basis and BW 3.0B database versions, Basis 6.20 Support Package 2 (or higher)
Oracle 8.1 (or higher, see below)
Possible problems
- Synonyms do not (yet) work!
Up to now, only tables and views have been used as data sources for the DB Connect from the R3 Basis. As soon as synonyms are also used in the Basis, you will be able to convert created views (or even replicated tables) to synonyms as a workaround.
With Basis 6.40 at the earliest, therefore as of BW 3.5, you will also be able to use synonyms. Until then, the following will help:
CREATE VIEW <view_on_synonym> AS SELECT * FROM <synonym>
- The source DB must have at least the release version of the BW DB.
Oracle only ensures the support of client-server links if the version of the client is not higher than that of the server. So if BW has Oracle version 8.1 and, as in the case of Dbconnect, is run as a client against the server of the source database, the source database must have at least release Oracle 8.1 or higher.
Of course, you have the option to install the Oracle client software of a lower version and then use this for the DB connect. This is also the procedure used to work with a DB connect on external databases of other vendors.
Furthermore, the implementation of the DBconnect function in BW uses SAP Basis functions. Specifications of Oracle 8.1 database catalogs are used here. The source database must therefore have at least Version 8.1.
- Oracle Client Software Version
If you want to connect from an Oracle BW DB to an Oracle source DB, for the DB connect you naturally use the client software that you already installed on each application server.
If you want to connect from a non-Oracle BW DB to an Oracle source DB, check item 3 of note 521230 to see which Oracle client software version is released with your BW R3 kernel and use this version.
- Date and time fields in Oracle and their conversion into SAP-compatible column formats
Example with a DATE field:
Since a SAP table does not have a DATE field (date values are NUMC(8) and time specifications are NUMC(6)), we will use the Oracle DBA_TABLES system table as an example.
SQL> desc dba_tables;
The Oracle DBA_TABLES system table has a LAST_ANALYZED field. This is a DATE type field and is recognized as a date field of 7 characters by DBA_CONNECT. However, the import does not work because the DATE is a 7-byte conglomerate of "...century, year, month, date, hour, minute and second." (extract from the Oracle documentation).
To make this DATE field legible for DB connect, you must use the TO_CHAR function in a VIEW. This should display the following examples:
SQL> select LAST_ANALYZED from dba_tables
where table_name like 'RS%' and rownum < 10 ;
The formatting used here is the default used implicitly by SQLPLUS.
SQL> select to_char(LAST_ANALYZED,'YYYYMMDD') as dat from dba_tables where table_name like 'RS%' and rownum < 10 ;
The result now has the SAP compatible format YYYYMMDD and should be loaded correctly by the DB connect as a date.
SQL> select to_char(LAST_ANALYZED,'HH24MISS') as tim from dba_tables where table_name like 'RS%' and rownum < 10 ;
The result now has the SAP compatible format HHMMSS and should be loaded correctly by the DB connect as a time.
You can use the following example for more detailed experiments:
SQL> select to_char(
TO_DATE('03-FEB-2001 04:05:06','DD-MON-YYYY HH24:MI:SS'),
'YY-MM-DD HH24-MI-SS') as datim from dual;
with the result:
DATIM
01-02-03 04-05-06
When you create a VIEW and use the TO_CHAR function (or other functions), you should easily be able to avoid problems with the interpretation of date/time specifications (and other reformatting).
Details about the functions and the formats are contained in the Oracle documentation.
- Special characters
A words that contain special characters can only be imported correctly if the code pages in BW and in the source system are identical. If the code pages are not the same, DB Connect can be used if the characters to be imported appear under the first 127 characters of the character set.
The use of multibyte code pages in the source system for saving data using character sets with more than 256 characters (Kanji, Katakana, Hiragana, Korean, Chinese, Tagalog, Khmer, Arabic, Cherokee, and so on) can cause the characters to become corrupt.
For questions concerning the code pages, also refer to the FAQ note 606359 and question/answer 19 that appears there. -
Retrieve data from a dynamic page via loadURL
Hello.
I would like to ask you how it is possible to retrieve data
from a dynamic page (asp classic in my case) using the loadURL
method.
I would like to create an html authentication form (with
username and password fields). The loadURL method should call an
asp page and then pass to the usual function 'DoIfSucceded' the
results of the elaboration.
Of course I'm going to have a switch in the function in order
to make different actions depending from the results of the asp
page (authentication succeded or failed).
I had a look to the examples at this page:
Adobe
samples
Is there anyone who can explain clearly how the results data
must be written by the asp page and how the success function can
retrieve them ?
I thank you in advance for your help.loadURL() uses the the XMLHttpRequest Object so if the
content you return is XML, you have 2 choices for accessing your
data. You can either access it as a text string via the
XMLHttpRequest object's responseText property, or as a DOM document
via the XMLHttpRequest object's responseXML property:
function MySuccessCallback(req)
// If my data is XML, I can access the data that was sent
from the server
// as DOM elements via the XMLHttpRequest's responseXML
property.
var xmlDOM = req.xhRequest.responseXML;
// OR, you can access the data sent back from the server as
text via
// the XMLHttpRequest object's responseText property.
var xmlAsAString = req.xhRequest.responseText;
var req = Spry.Utils.loadURL("GET",
"/app/book.php?id=1&code=54321", true, MySuccessCallback);
If your serverside script wants to use some other format as a
response like JSON or plain text, then you can only access the data
as text via the responseText property.
--== Kin ==-- -
How to retrieve data from a jsp page
I have created a page with some text boxes, file, submit button. In my Ist jsp, i am dynamically add Text boxes and File (for Uploading).
In the 2nd jsp, i am used Jakarata FileUpload API. I am able to retrieve all data and files except that value of dynamicall added text boxes. That is, I cannot retrieve data from dynamically added text boxes.
Using Jakarata FileUpload API, i can retrieve values of form data using
getString() method.
I want to know that there is any way or method for retrieving form data values into String Array.
regards
madhu
[email protected]Use parseRequest(request) to get the file information as you already are doing. However, I dont know how you can use request.getParameter("textField1") to get the other fields from the page. My work-around is as follows:
Change your submit button to an ordinary button and add an onClick event to it. Then in the javascript function that supports the onClick, add the textField1 as follows:
<form name="fileUploadForm" method="post" action="someAction" (((more code code here)))))
function submitButtonClick(){
document.fileUploadForm.action=
document.fileUploadForm.action+
"?textField1="+document.fileUploadForm.textField1.value"+
"&textField2="+document.fileUploadForm.textField2.value"+
"&textField3="+document.fileUploadForm.textField3.value";
document.fileUploadForm.submit();
As you can see in the above code, I append the textField1 name/value pair to the end of the action. Now in the server, you can use getParameter("textField1"); -
How to retrieve data from a view.
HI,
I want to retrieve the values of the <b>Field MNTXT from the view V_T530</b>.
Please let me know how i can retrieve data from this view.The Select statement doesnt work on a view.
Regards,
BhavikaHi kumar,
By using select stattement you can fetch from view.
Here viaufkst is view.
For it is working. please check.
select (g_selfields_tab) from viaufkst
into corresponding fields of table order_itab
for all entries in order
where "(g
aufnr in order and
equnr in equip and
priok in prior and
iphas = '3' and
ilart in acttyp and
qmnum in notif and
werks = plant and
auart in ortyp and
getri in date.
please try.
with Regards, -
Retrieving data from a BW Query runs endlessly in Crystal
Hi,
I have installed Crystal Reports 2008 SP2 with SAP BO Integration Kit 3.1. When I create a new file from a SAP BW 7 Query I everything works fine (field selction etc) until I run it and try to extract data from the database. I can enter the parameters and enter the login data for the BW connection. After that I can see the entry "retrieving data from the database" in the status bar and that's it. The screen kind of freezes and I don't get any result. I can wait for 2 hrs no result. In the end I cannot even get back to screen. I have to close it through taskmanager.
I have tested the query with transaction RSRT and the same parameter value I chose in Crystal reports and there I get a result. Therefore the entry values should be fine.
Did I install anything wrong, did somebody encounter this problem as well?
Thanks a lot in advance for any help provided
Kind Regards,
MelanieHi,
I entered the SQL statement in transaction MDXTest but it is running since 7 minutes.
>> Transaction MDXTEST has an option to generate a test sequence and is not there to test SQL statements. You need to enter a valid MDX statement.
Function module "/Crystal/MDX_GET_STREAM_INFO" not found
>> then I would suggest you make sure that all the Transports from the SAP Integration Kit have been properly imported - see the Installation Guide for the SAP Integration Kit for details.
Ingo -
Hi,
I am working on a report where I have to retrieve data from 3 tables(marc,mara,makt).For this I have used 3 select statements for retriving data from 3 tables.There r some fields which r not present in marc table where as present in mara and makt tables.So added thos fields in marc internal table t_marc.I have looped at marc table and used the read statement to read the data from mara table using the key field matnr from both the tables.This read statement is giving the sy-subrc value as 4.Could u pls tell me why this is happening?I am sending my code.
SELECT matnr
werks
pstat
lvorm
FROM marc
INTO TABLE t_marc
PACKAGE SIZE 500
WHERE matnr IN s_matnr
AND werks IN s_werks.
IF NOT t_marc[] IS INITIAL.
SELECT matnr
ersda
laeda
meins
FROM mara
INTO TABLE t_mara
FOR ALL ENTRIES IN t_marc
WHERE matnr = t_marc-matnr
AND ersda IN s_ersda
AND laeda IN s_laeda.
IF NOT t_mara[] IS INITIAL.
SELECT matnr
maktx
FROM makt
INTO TABLE t_makt
FOR ALL ENTRIES IN t_mara
WHERE matnr = t_mara-matnr.
LOOP AT t_marc INTO wa_marc.
READ TABLE t_mara INTO wa_mara WITH KEY matnr = t_marc-matnr.
IF sy-subrc IS INITIAL.
wa_marc-meins = wa_mara-meins.
MODIFY t_marc.
APPEND wa_marc TO t_output.
ENDIF.
READ TABLE t_makt INTO wa_makt WITH KEY matnr = t_marc-matnr.
IF sy-subrc IS INITIAL.
wa_marc-maktx = wa_makt-maktx.
MODIFY t_marc.
APPEND wa_marc TO t_output.
ENDIF.
ENDLOOP.hi hema,
Dont use three select stements for this scenario.
Just use innerjoin and join all the three tables.
Three tables should contain MATNR (material number).
By using that retrieve data from 3 tables by using a single select statement.
Eg:
SELECT DISTINCT a~matnr "MATERIAL NUMBER
a~ersda "CREATED ON
a~mtart "MATERIAL TYPE
a~meins "BASE UNIT OF MEASURE
a~bstme "ORDER UNIT
b~maktx "MATERIAL DESCRIPTION
c~bwkey "VALUATION AREA
c~lbkum "TOTAL VALUED STOCK
c~salk3 "VALUE OF TOTAL VALUED STOCK
c~stprs "STANDARD PRICE
c~peinh "PRICE UNIT
c~bklas "VALUATION CLASS
INTO TABLE it_matdetails
FROM mara AS a INNER JOIN makt AS b ON a~matnr = b~matnr
INNER JOIN mbew AS c ON a~matnr = c~matnr
INNER JOIN marc AS d ON a~matnr = d~matnr
INNER JOIN mard AS e ON a~matnr = e~matnr
WHERE b~spras = sy-langu AND a~matnr IN matnr AND d~werks IN werks AND e~lgort IN lgort.
pls reward if helpful. -
hi,
I need to develop a report for pay roll.
one of the field called "Net Sal" from a cluster.
How do i retrieve data from the clusters?
Thanks & Regards
Chetanahi
plz refer the following program and use logical database PNP in the LDB section and modify the wagetypes in rt-lgart in the program to suit ur needs.
reward points if it helps!!
gunjan
*& Report ZHR_PAYROLL
REPORT ZHR_PAYROLL.
TABLES: PCL1,PCL2,PERNR,PA0001,PA0002,PA0008.
INCLUDE RPC2CD09. "Cluster CD data definition
INCLUDE RPC2CA00. "Cluster CA Data-Definition
INCLUDE RPPPXD00. "Data Definition buffer PCL1/PCL2 Buffer
INCLUDE RPPPXD10. "Common part buffer PCL1/PCL2
INCLUDE RPPPXM00. "Buffer Handling routine
*COUNTRY SPECIFIC INCLUDE
INCLUDE PC2RXIN0. "Cluster IN data definition
INCLUDE RPC2RX09. "Data Definition for Cluster RD in PCL2
*For Error records
DATA: BEGIN OF HR_ERROR OCCURS 10.
INCLUDE STRUCTURE HRERROR.
DATA: END OF HR_ERROR.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS:P_PAYTYP LIKE PC261-PAYTY,
P_RUNDAT LIKE PC261-BONDT.
SELECTION-SCREEN END OF BLOCK B1 .
DATA: BEGIN OF T_MAIN OCCURS 0,
W_PERNR LIKE PA0001-PERNR,
W_ENAME LIKE PA0001-ENAME,
W_GROSS TYPE P DECIMALS 2,
W_SALARY TYPE P DECIMALS 2,
END OF T_MAIN.
START-OF-SELECTION.
GET PERNR.
PERFORM GET_RT_DETAILS.
END-OF-SELECTION.
PERFORM DISPLAY_RESULT.
*& Form GET_RT_DETAILS
text
--> p1 text
<-- p2 text
FORM GET_RT_DETAILS .
CLEAR RGDIR.
**IMPORT CLUSTER RESULTS FROM CLUSTER DIRECTORY**
CD-KEY-PERNR = PERNR-PERNR.
RP-IMP-C2-CU.
RETURN CODE FROM IMPORT.
IF RP-IMP-CD-SUBRC <> 0.
MESSAGE S124(HRPADIN01) WITH PERNR-PERNR.
Payroll results not found for the employee no. &
PERFORM BUILD_ERROR TABLES HR_ERROR
USING PERNR-PERNR 'HRPADIN01'
'124' PERNR-PERNR SPACE SPACE SPACE.
REJECT.
ENDIF.
=====================================================================
SAPGUI Progress indicator
=====================================================================
MESSAGE w_progress TYPE 'S' DISPLAY LIKE 'I'.
SORT RGDIR BY FPPER DESCENDING.
LOOP AT RGDIR WHERE FPBEG GE PN-BEGDA AND FPEND LE PN-ENDDA
AND SRTZA = 'A' AND PAYTY = P_PAYTYP AND BONDT = P_RUNDAT.
PERFORM progress_indicator.
**IMPORT RESULTS FROM INDIA PAYROLL CLUSTER**
RX-KEY-SEQNO = RGDIR-SEQNR.
RX-KEY-PERNR = PERNR-PERNR.
RP-IMP-C2-IN.
RETURN CODE FROM IMPORT.
IF RP-IMP-IN-SUBRC <> 0.
CONTINUE.
ENDIF.
PERFORM FILL_T_MAINTAB.
ENDLOOP. " RGDIR
ENDFORM. " GET_RT_DETAILS
*& Form FILL_T_MAINTAB
text
--> p1 text
<-- p2 text
FORM FILL_T_MAINTAB .
LOOP AT RT.
CASE RT-LGART.
WHEN '/101'.
ADD RT-BETRG TO T_MAIN-W_GROSS.
CLEAR RT-BETRG.
WHEN '1002'.
ADD RT-BETRG TO T_MAIN-W_SALARY.
CLEAR RT-BETRG.
ENDCASE.
ENDLOOP.
APPEND T_MAIN.
CLEAR T_MAIN.
ENDFORM. " FILL_T_MAINTAB
*& Form BUILD_ERROR
text
-->HR_ERROR text
-->$PERNR text
-->$MSGID text
-->$MSGNO text
-->$MSGV1 text
-->$MSGV2 text
-->$MSGV3 text
-->$MSGV4 text
FORM BUILD_ERROR TABLES HR_ERROR STRUCTURE HR_ERROR
USING $PERNR
$MSGID
$MSGNO
$MSGV1
$MSGV2
$MSGV3
$MSGV4.
HR_ERROR-PERNR = $PERNR.
HR_ERROR-ARBGB = $MSGID.
HR_ERROR-MSGTY = 'E'.
HR_ERROR-MSGNO = $MSGNO.
HR_ERROR-MSGV1 = $MSGV1.
HR_ERROR-MSGV2 = $MSGV2.
HR_ERROR-MSGV3 = $MSGV3.
HR_ERROR-MSGV4 = $MSGV4.
APPEND HR_ERROR.
ENDFORM. "BUILD_ERROR
*& Form DISPLAY_RESULT
text
--> p1 text
<-- p2 text
FORM DISPLAY_RESULT .
LOOP AT T_MAIN.
FORMAT COLOR 1.
WRITE:/12 T_MAIN-W_PERNR,22 T_MAIN-W_ENAME,56 T_MAIN-W_GROSS,67 T_MAIN-W_SALARY.
ENDLOOP.
ENDFORM. " DISPLAY_RESULT -
How to retrieve data from virtual infotype?
Hi.
I'm trying to write an ABAP program that's retrieving data from infotype 2501.
If i'm looking at this table PA2501 from SE16, i can see that it's empty, but...
I have an HR program that's using the PNP and i can see in debbuging mode allot of data over there.
So, my question is: how can i get this data with a simple SELECT command? where is the data?
Thanks!
Barak.There may be no data physically stored in table PA2501, it may reside in other tables but programatically pulled by the infotype into internal tables. Surender has given a good example, there are many more examples like some fields are stored in another table. Like for infotype 105, some fields are stored in PA0105 and some are stored in PA0106 which are pulled and displayed on one infotype screen i.e. 105 and hence we do not have a screen for 106. It may be same situation.
If you have to have a SELECT access, then only way is to debug the code and see how it is pulling the data, which tables etc. -
How to retrieve data from database to the structure(complicated)
Hello everyone:
I want to retrieve data from database to the structure. but the structure defined like this below:
TOLERANZOB LIKE QAMV-TOLERANZOB
TOLERANZOB1 LIKE QAMV-TOLERANZOB
so how can I retrieve the data from the database ? make sure that the two fields contain data both.
Thanks in advance .
Regards
NickHi Nick,
To retreive data for TOLERANZOB from QAMV,
If you know the key fields then use
SELECT SINGLE TOLERANZOB FROM QAMV INTO TOLERANZOB WHERE keyfields.
else, you can use
SELECT TOLERANZOB FROM QAMV UPTO ONE ROWS INTO TOLERANZOB WHERE....
Once you retreive the data using the select query, you can check if it is initial and if not move the data from TOLERANZOB to TOLERANZOB1.
<b>Reward points for helpful answers.</b>
Best Regards,
Ram.
Maybe you are looking for
-
Change the pic iMovie passes to YouTube for it's ID pic for that video?
what else is there to say
-
WebVPN Content Rewrite - how can we bypass it?
We are publishing a Bookmark through a WebVPN portal to a server on the inside of our network. That bookmark is made available to users via DAP. The bookmark works for the most part, however the internal website does not function very well through t
-
"Powered by Adobe" - Removal option feature request
I would love to remove this. I understand that this is currently not possible. I'm willing to pay extra if required to remove these links. When embedding the forms on my website, the last thing I want to do is advertise for Adobe or have my competiti
-
OS - Linux Mageia 1 - but FF 6.02 works fine with Fedora14
-
Two masks causing mc_masked to blink
hello; I have on a timeline: mc_mask_A mc_A with timeline code: mc_A .cacheAsBitmap = true ; mc_mask_A.cacheAsBitmap = true ; mc_A .mask = mc_mask_A ; inside of mc_A I have layer 1 set to mask with a shape; layer 2 with mc_B tha