Retrieving protocol and connection address in runtime

Hi,
Im trying to Debug p2p video application in browser and I noticed some problems when using different rooms in my application.
I need to figure out the actual protocol and node connection in order to identify the problem, the thing is that its only available in trace
while testing in IDE.
Is there additional way to know the fms node name and protocol after actual connection.
Best Regards,
Gadi Srebnik

With the latest SDK you can override the debug trace function and have the messages go, for example, in a textarea in your app.
Look at com.adobe.rtc.util.DebugUtil.traceFunction.
Otherwise you can dig in the ConnectSession object and get the underlying NetConnection object.

Similar Messages

Exchange 2010 EWS and retrieving To and From Addresses

I'm using Microsoft EWS notification streaming to monitor a mailbox for new messages. It is doing exactly what I need it to do except i'm having trouble pulling out the new email addresses from the message for To and From. I'm using Microsoft's
sample application they gave me here
http://www.microsoft.com/en-us/download/details.aspx?id=27154 but can't figure it out. Any help is appreciated.
private
static
void OnNotificationEvent(object
sender, NotificationEventArgs args)
// Extract the item ids for all NewMail Events in the list.
var newMails =
from e
in args.Events.OfType<ItemEvent>()
where e.EventType ==
EventType.NewMail
select e.ItemId;
// Note: For the sake of simplicity, error handling is ommited here.
// Just assume everything went fine
var response = _ExchangeService.BindToItems(newMails,
new
PropertySet(BasePropertySet.IdOnly,
ItemSchema.DateTimeReceived,
ItemSchema.UniqueBody,
ItemSchema.Subject,
ItemSchema.DisplayTo,
ItemSchema.InternetMessageHeaders,
ItemSchema.Body));
var items = response.Select(itemResponse => itemResponse.Item);
//ExtendedPropertyDefinition transportMsgHdr = new ExtendedPropertyDefinition(0x007D, MapiPropertyType.String);
foreach (var
item in items)
Console.Out.WriteLine("A
new mail has been created. Received on {0}", item.DateTimeReceived);
Console.Out.WriteLine("Subject:
{0}", item.Subject);
Console.Out.WriteLine("To:
{0}", item.DisplayTo);
Console.Out.WriteLine("Body:
{0}", item.Body);
Console.Out.WriteLine("ID:
{0}", item.Id);
Console.Out.WriteLine("Headers:
{0}", item.InternetMessageHeaders);
Michael Duhon

You need to include the To and From properties in the property set your using in the Bind statement change
var response = _ExchangeService.BindToItems(newMails,
new PropertySet(BasePropertySet.IdOnly, ItemSchema.DateTimeReceived,
ItemSchema.UniqueBody, ItemSchema.Subject,
ItemSchema.DisplayTo, ItemSchema.InternetMessageHeaders,
ItemSchema.Body, EmailMessageSchema.ToRecipients, EmailMessageSchema.From));
Exchange will only return the properties that you ask it to.
Cheers
Glen

Safari is not working on the Mac. Internet is fine, mail, App Store etc all working and connecting to Internet fine. Done the latest software update, still not working. When selecting a web address from bookmarks or typing in search bar, partial blue bar.

Safari is not working on the Mac. Internet is fine. mail, App Store etc all working and connecting to Internet fine. Done the latest software update, still not working. When selecting a web address from bookmarks or typing in search bar, partial blue bar only and coloured wheel appears.

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. That will revert its settings to the defaults.
If extensions aren't causing the problem, see below.
Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found

Time capsule first said the back up was delayed no it won't connect to my home network. my internet is working fine and so is everything else but when i try to connect to the time capsule it says to check my server and ip address help!

time capsule first said the back up was delayed, now it won't connect to my home network. my internet is working fine and so is everything else but when i try to connect to the time capsule it says to check my server and ip address and if it continues to contact system administrator.. i didnt change anything, please help!

Lion networking.. just need to reboot everything.. modem TC and the clients.. then it will work.. Sometimes just the TC is enough.. sometimes just the computer. .. Vista golden networking award.. did you turn it off and on again??

Why can't I open and retrieve my files from iPhoto and my address book after importing the files from my Power mac G5 to my new Mac Pro? I get a warning that says the new OS on my Pro doesn't open files from a Power Mac. Any idea how I can fix this?

Why can't I open and retrieve my files from iPhoto and my Address Book after importing the files from my Power Mac G5 to my new Mac Pro? I get a warning that says the new OS on my Pro doesn't open files from a Power Mac. Any idea how I can fix this?

For your addressbook, export the files to vCard on the PowerMac, then bring them over to your Mac Pro. For your iPhoto, copy the Users -> yourname -> Pictures folder to your Desktop on the Mac Pro, and open iPhoto on the Mac Pro holding the command and option keys. Select the library file from that Pictures folder and open it. It should import all the pictures into iPhoto as part of the rebuild process. Other PowerPC to Intel migration issues are covered here: https://discussions.apple.com/docs/DOC-2295

Should my iPhone 1 (iOS 3.1.3) with Bluetooth 2.0 (Handset HSP?) work with wireless earbuds with BT 4.0 and the Headset (and Handsfree, A2DP, AVRCP) protocol? They pair and connect; status bar looks good. But audio always comes out the speaker. Thx.

Should my iPhone 1 (iOS 3.1.3) with Bluetooth 2.0 (Handset HSP?) work with wireless earbuds with BT 4.0 and the Headset (and Handsfree, A2DP, AVRCP) protocol? They pair and connect as expected (with a PIN); status bar looks good and shows Bluetooth active, and I even see the iPhone displays the battery levels of the wireless earbuds. But audio always comes out the speaker. (If I plug in wired headphones into the headphone jack then audio comes into the wired headphones, as expected.) I have rebooted the iPhone; I have had it forget about the wireless earbuds, and repaired and reconnected; I have reset all network settings. Thx in advance.
PS: I understand that more recent versions of iOS have a way to choose where audio output goes (speaker, headphone jack, Bluetooth device). Does this older version of iOS? I could not find an option or setting.

I've noticed this lately as well, with my iPhone 4. I couldn't confidently pin it directly on any particular iOS update, but my iPhone used to automatically connect up via Bluetooth with my Prius's handsfree feature, and now it doesn't. I work with a CE-based device at my job, with Bluetooth capability, and I used to test out that feature by having it discover my iPhone. This no longer works either.
What I have found (not really a solution, but it does work and may be a clue for Apple) is that if I simply go to the Settings app then the General -> Bluetooth screen and let it sit there, it will pair right up with my car within a few seconds. Bluetooth is always on, and always says "Now Discoverable" at the bottom of the settings screen.

Question about the ECC6 migration and the retrieving of partner's address

Hi experts,
I have already post a thread about the use of the table BUT021_FS instead of BUT020 for retrieving partner's standard address.
I do modifications to my specific programs.
But what about the standard?like BUA_BUT020_SELECT_WITH_PARTNER for example
If I read the standard code, I see that it is still using the indicator XDFADR to specify if this address is standard or not.
I am new at ABAP and I want to know your analyse about it.
So, my question is : Is the result of this FM (partner address) correct? what I mean to say if I will use this address to determine if it is a standard or not.
Best regards.

Hi,
I understood what you mean but I don't use this FM explicitly.
I am analyzing a CRM 7 dump and I see in the traces of st22 the use of this FM.
The dump appears when I create new Organization and Contact in CRM WebUI. May be it's a validation of fields of address.But I think, I must put this other thread in CRM, but I you had some experience with it, it would be very helpful.
Thank you for your help,
Best regards.

I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

Urvergessen wrote:
+You may have already done this, but do you have the first AirPort Express configured to "Allow this network to be extended"?+
Could not find that setting anywhere.
It's in AirPort Utility, AirPort panel, Wireless tab.
When I'm within the range of the base station I connect normally, but further away the connection drops despite the fact that the other Airport is very close and light is green. Interestingly, my PB Pro has signal almost everywhere in the house, but my iPhone and Mac Mini don't. Most likely just a hardware difference?
In AirPort Utility with the second Express, in the AirPort panel, Wireless tab, have you checked "Allow wireless clients"?
The second AP does show an IP address: 10.0.1.3.
With a "Configure IPv4" setting of "Using DHCP", that suggests that the second Express really is connecting to the first Express. In that case I have no other explanation of your your problem.

Where is the list of connected devices, their MAC id's,and IP addresses

I used to be able to see list of devices connected to my airport extreme, including their MAC id's and IP addresses. I can no longer find that anywhere. Have they removed that information for AirPort Utility?

Open AirPort Utility
Hold down the option key while you double click on the AirPort or Time Capsule icon
Wireless clients will appear. Click the arrow next to each client for additional information about the MAC address, connection quality, etc.
Or, you can simply click on the AirPort or Time Capsule icon in AirPort Utility and then look for Wireless Clients. Click each client for more info.
Ethernet clients do not appear in the newer versions of AirPort Utility.

Connecting to datasource and retrieve, insert and update data

hi,
i am doing a JSP page that need to retrieve data and display on textView, insert data and update data. I have already create a datasource in Visual Composer. Does anyone have a sample codes for mi to use it as reference. So that i can connect to the datasource tat i created in Visual composer and retrieve, insert and update data. thanz
Regards,
shixuan

Hi,
After creating a data source in Visual composer .
you have to create a BI system that Visual Composer can use in
the SAP NetWeaver Portal.
refer this pdf file for further Info
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6209b52e-0401-0010-6a9f-d40ec3a09424
Regards,
Beevin

Has anyone had any issue with opening a new tab and the address bar not connecting to websites in 33.1.1?

I think ever since we moved to v33, I've been having an irritating issue that whenever I open a new tab that isn't connected to a website yet and try to enter a website address, it won't connect to ANY website. Doesn't matter if I hit Enter to try to make it go, doesn't matter if I click the right-pointing arrow button to make it go, doesn't work. I can go into a tab already connected to a website, type in a new website there and it'll create a new tab and take me to the new website, but not if I use new tab button.
Anyone else had this issue? Any fixes?

Sorry, that didn't help as I'm able to connect to websites, just not in a particular way.
For instance, I am able to type in and connect to websites IF the tab is already in use with a website (i.e. if I were to type "yahoo.com" in the address bar of this tab FF would open a new tab and take me to yahoo.com) but not when it is a completely new tab.

Can please help me in configuring IP-DLC link services and APPC/LU 6.2 protocol to connect to CICS system on mainframe?

Hi Stephen,
I am using HIS 2013 evaluation version to connect to IBM mainframe CICS system. I need brief information on the steps to follow to configure APPC/LU 6.2 protocol and configure Local and Remote LU's.
I also need to know how to test it once i configure. later I need to write a .Net application using Transaction Integartor to connect to CICS system.
Please help me on understanding and configuration.
Thanks in advance.
Pradeep I

Hi Pradeep,
I would recommend you to read the IPDLC Whitepaper available on
http://www.microsoft.com/en-us/download/details.aspx?id=17441
This gives you some advise how to setup a IPDLC aka. Enterprise Extender connection to your mainframe.
Once this has been setup you may want to take a look at the HIS 2013 SDK available on
http://www.microsoft.com/en-us/download/details.aspx?id=41557
Please with the ApplicationIntegrationStarterGuide to understand all the changes and news coming with HIS 2013 in order to write a TI SNA Link/User application.
Thanks
Manfred Mittermüller - MSFT

My shared shows the NAS with incorrect logo and can't connect to it - can do so only via smb and ip address

My Mac shows other MACs somethimes as PC icons as well as my Synology NAS.
Only way to connect is via SMB and IP address - clicking on icons fails.

I am also having the same issue. Please help!

My "send" button has disappeared and my address list on the left side has disappeared also. How do I retrieve these items?

I have never had a problem sending & or receiving e-mail prior to the past few days. All of a sudden the Send button has disappeared and my address list on the left side has disappeared too.
I did find some help which suggested opening the Write and then press F9 to retrieve the address list. The address list returned on the left but does not appear as it used to ie. full length of the screen. However what is now there will be satisfactory. The "Send " button is still missing which is frustrating as I have not been able to send any e-mails for approximately a week now.
Would appreciate advice as to how to retrieve the above.
Thank you.

Thank you for your advice re: the SEND button having disappeared and also the address list on the left side having disappeared. I must confess that I was not able to get it back myself. This a.m. my computer would not turn on at all. I therefore contacted the company which services it, namely iTOK and a technician read your suggestions and after a bit of manipulation of various things he got them both back. It seems that I had not noticed the "press the alt key" as part of it due to the fact that the 'alt key' was not 'ALT key'. My fault for skimming too quickly. Thanks again for your advice...it worked and now i am back on track.

My MBP mid 2010 display blackout and froze while working but my keyboard light will still light up. Won't be able to retrieve it and have to hard shutdown. Sometimes it happens a lot. Wether it connected to power or not, it will blackout on and off. Pleas

My MBP mid 2010 display blackout and froze while working but my keyboard light will still light up. Won't be able to retrieve it and have to hard shutdown. Sometimes it happens a lot. Wether it connected to power or not, it will blackout on and off. Please advice what shall I do.

Do you have a 15" mid-2010? If so then your problem is surely...
Mid-2010 15" MacBook Pros - the bad NVIDIA GPU
If you're having frequent kernel panics with your 15" mid-2010, or intermittent screen problems, the problem is, more than likely, the faulty NVIDIA GPU found in a number of those machines.
Here's just a sample of a kernel panic log that points to the faulty NVIDIA card:
Kernel Extensions in backtrace (with dependencies):
         com.apple.GeForce(6.4.0)@0x82ac4000->0x82b7afff
            dependency: com.apple.NVDAResman(6.4.0)@0x834a0000
            dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000
            dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000
         com.apple.nvidia.nv50hal(6.4.0)@0x83c05000->0x84019fff
            dependency: com.apple.NVDAResman(6.4.0)@0x834a0000
         com.apple.NVDAResman(6.4.0)@0x834a0000->0x8378dfff
            dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000
            dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000
            dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000
Here's the "official" Apple take on the issue - but the very real kernel panics need not be preceded by 'Intermittent black screen or loss of video'... in fact, you might not experience any video problems at all. Although video problems can certainly be a portent of things to come…
So what can you do? Print out a copy of your kernel panic and a copy of the Knowledge Base article and take them, along with your machine, to your local Apple Store or an Apple Authorized Service Provider. The unfortunate thing is that many people have passed the “three years from date of purchase” now and Apple is not honoring the free logic board replacement for many users. Some dealers seem to be making some exceptions for those past the three year mark, but don’t count on it…
Good luck,
Clinton

Retrieving protocol and connection address in runtime

Similar Messages

Maybe you are looking for