Retrieving the Cell Site Id, Mobile Network Code, Mobile Country Code

Hi,
I am using CLLocationManager to retrieve the latitude/longitude of a place.Its working fine.I can also find the distance travelled between the old location and the new location.
But I need to get the information about the Cell Site Id, Mobile Network Code, and Mobile Country Code .
Is there any API in the SDK to retrieve them ?or any other work around that will fetch these values?
Any suggestion or help will be appreciated.
Thanks

Hi and Welcome to the Community!
Please refer to this helpful thread:
http://supportforums.blackberry.com/t5/General-BlackBerry-Functions-and/Unlocking-your-BlackBerry-Gu...
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Mobile network issue, mobile network issue

Hi,
On my iPhone 4s with latest IOS 7.0.4, i have network issue
I am on Airtel Maharashtra Network (India)
when ever I come out from low network or no network area, my phone does not automatically search the mobile network.
but there is a strange thing, the phone shows full network even if there is no network or low network.
I need to put the phone on Aeroplane mode and then put it on normal mode. then only my phone searches for network.
most of my friend and relatives complaint me, that my phone is not reachable due to this issue.
I did not faced this issue on IOS 6.
Also messages are not sent even if the mobile network is available.
Also the keyboard lacks quick responce.
Request to Apple IOS to find the solution on this issue.

Hi thanks for the reply.
I already have an Iphone 3gS, the same Airtel network card works perfectly fine with the phone. and I do not face any problem with the reciption.
the problem is only with Iphone 4s and with IOS7
Also I tried Iphone 4s with different service provider (Idea) I face the same problem.
Do you still say its airtel issue.

Does anyone know about the cell site over in lake chabot in castro valley is being built ?

>> Duplicate post removed to comply with the Verizon Wireless Terms of Service Please see Does anyone know if cell tower is going to be built at Lake chabot in Castro Valley ? <<
Message was edited by: Verizon Moderator

EverWeb has built in SEO and it is not hard to do. All you do is add all the headings etc as you go along whilst in the application and at the same time as you create your pages. Nothing more to it and you don't need anything extra to be able to do it. It is not complex and is not a lot of hard work either.
WordPress is not dependant on whether you use a Mac or a PC. WordPress is all done on line, so is accessed from any Mac or PC - it is internet based, so you access your site online.
You either use WordPress.com or WordPress.org and if you use WordPress.com, it is free and you publish to the WordPress servers. If you use WordPress.org you need to install this on a web host of your choice and build your site online.
You can use WordPress locally on your Mac, but to be able to install it on your Mac, you need to download something called MAMP from the internet so that you can run WordPress locally because it is a Content Management System (CMS), it uses a database, which is why you need a web host to run it.
If you don't understand WordPress, then perhaps EverWeb is a better way to go for you.

One Z10 works fine, the other has problems connecting to mobile network

Hi, my wife and I both have Z10's, and we're both on the same mobile network (Wind Mobile in Canada). The wife's Z10 seems to have no problems connecting to or staying connected to Wind Mobile. Mine on the other hand seems to randomly drop the connection, or has trouble obtaining connection, and sometimes ends up roaming.
The only difference between the two Z10's is that hers is purchased through Wind Mobile itself, and it is locked to their network for the moment. I purchased mine a bit later, and I bought mine directly through Blackberry's online store, and mine is therefore unlocked. What I have to do sometimes is turn off the mobile connection, and turn it back on, and it works after I do that. However, that's annoying, as I'd rather have it automatically retry the network connection so that it doesn't go roaming within my own city.
Solved!
Go to Solution.

If you're passing by a Wind store in the near future, why not drop in and ask if they'll swap SIM cards for you? It could be something with the SIM.
In the meantime, try resetting your phone. This is equivalent to doing a battery pull and it's usually the first thing I recommend when troubleshooting an issue. Simply press and hold your power button for about 15 seconds until you see BlackBerry on your screen. Don't release the button before that and ignore anything that appears before BlackBerry.
Let us know if either of those solutions helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

How i retrieve the default setting for my browser ?

when i download any file from firefox browser there a small box that ask you if you want to from your browser to do the same action for files like the file you are downloaded automatically,
i did that and i wont to retrieve the old sitting i tried to reinstall the browser but it doesn't worked! so any suggestion?

The instructions in [[Resetting preferences]] explain how to reset all your preferences back to the defaults.

Retrieving the system ID

HI,
Please let me know if it is possible to retrieve the System id either using a UDF or int he adapter module.
Regards,
Meenakshi

HI raj ,
i did get the code to retrieve the system ID .
The code is as follows:
String systemID=System.getProperty("SAPSYSTEMNAME");
Is this the correct way to retrieve the system ID . If there is any other code that can be used to retrieve the ID, please let me know.
Regards,
Meenakshi

Retrieve the PublishingRollupImage field

I ambuilding a Webpart and I need to retrieve the PublishingRollupImage field url however I receive a serialization error. Can someone help me retrieve the value from this field?
Here is my code
foreach (SPListItem anItem in itemsCollection) {
htmlData += string.Format(@"
<div class='mainNewsArticleContainer'>
<div class='lftContainer'>
<a href='ddd'><img src='{4}' alt='{0}' width='{2}' height='{3}'></a>
</div>
<div class='rhtContainer'>
<a href=''>
<h2 class='newsTitle'>{0}</a></h2>
<p class='newsContent'>{1}</p>
<p class='newsReadMore'>Read More</p>
</a>
</div>
</div><div>{4}</div>
", anItem["Title"], anItem["ArticleSummary"], _imgWidth, _imgHeight, anItem["PublishingRollupImage"]);
htmlData += "</div>";
Thanks
Micky

Thanks Paramesh, but that only brought back the name of the page. However I managed to retrieve the full url of the PublishingRollupImage using the following code.
// Code to get Publishing Rollup Image
stringpublishingRollupImageField = anItem.GetFormattedValue("PublishingRollupImage");
LinkFieldValuepublishingRollupImageFieldLinkField
= newLinkFieldValue(publishingRollupImageField);
stringimageUrl = publishingRollupImageFieldLinkField.NavigateUrl;

Computer Name prompt with Country Code

Using SCCM 2012 R2..
Currently we have 21 global sites indicated by a two digit country code, for example United States US, United Kingdom, GB, Spain ES etc.....
We are a Dell shop so we want the serial number as well.
Our end result should look like this. United States Computer
<CountryCode>-<Serialnumber>
US-23GHT54 for example.
What is the best way to have a drop down or prompt for country code in computer name field when a tech starts the OSD process??

Hi
You can have a look at two of my blog post. The first one will show you how to enable Powershell support in your boot images:
http://www.mimercon.dk/da/easyblog/entry/adding-powershell-support-in-configuration-manager-2012-r2-boot-images
And the second one will guide you through all the step required to implement a Powershell GUI prompting for a Computer Name if the machine is unknown:
http://www.mimercon.dk/da/easyblog/entry/prompt-for-computer-name-during-configmgr-2012-r2-os-deployment-1
I know that this is not exactly what you want but you would "only" need to create your own Powershell GUI where you can select the country code and append the serial number to get your computer name generated. And then you could just follow the
step in the second post and substitue my Prompt-Computer-Name GUI with your own.
If you know a bit about about Windows Forms and Powershell it is fairly easy to create even though it might be easy for me to say that :)
If you want I could create a basic GUI for you but you would have to be specific in how you would like it to look and I would need all the country codes you need in the drop-down box. You can find my e-mail at my web site.

How can I make local calls without using a country code when it's in my Contacts?

The phone numbers in my Contacts all contain country codes because I do a lot of travelling.
An example of this might be:
+1 (229) 123-4567
+44 (0)12 345 6789
+31 (0)10 2345 6789
I have an unlocked phone so when I travel, I usually pick up a local SIM and use that to make calls.
The problem I have is that when I am abroad and select a phone number from my contact list it doesn' work. For example, if I select a contact with the number:
+31 (0)10 2345 6789
A voice-recording comes on saying that the number I had dialed was incorrect.
But when I dial the number manually:
010 2345 6789
It works.
In the US I do not have this problem because for some reason, the phone knows whether the +1 is needed or not. I'm sure if it uses it at all when you're in the US. When I dial internationally from within the US, the number dialing works fine.
So this problem only occurs when I'm dialing locally in the country I'm in while travelling outside the US.
Anyone have any idea of why this is happening and more importantly, what I need to do to fix this? I would hate to have go and change all my contact numbers and get rid of the country codes. If I ever have to call those numbers internationally, I'll need to manually add the country code back in.
Very annoying!
Advice anyone?

If you include a country number, you have to drop the initial 0 from the area code. eg +31 10 2345 6789 instead of +31 (0)10 2345 6789

Error- "Tax code B0 country IN does not exist in procedure TAXINN"

Hi to All,
I'm working on a Import PO. While doing MIRO for planned delivery cost, I'm getting an error "Tax code B0 country IN does not exist in procedure TAXINN"
I've assigned the Tax code to company code, but still I'm not able to solve this problem. Could anybody tell me the areas in which I may have made the mistake?
Thanks & Regards,
Piyush

Hi Piyush
You assign your tax code to company code at IMG--> Logis General --> Tax on Goods Movemnt --> Basic Settings --> Calculation of excise duty -> Condition type excise determination --> Maintain Tax code to country code
If still problem is not resolved you maintain the all rates to 0 in FTXP of this Tax code.
Regard
Vivek
-- Reward if helpful !!

Creation of new country codes - Serbia.

The business user is not able to find country code for Serbia in production system.
We are currently using SAP ECC 6.0.
I have refered the SAP note no 603152 for creating country code .
Their are two alternatives available to fix it:
1. Manual creation of country code in the system. We need to maintain additionally the currency also in the system. Note: I do not know the implication of manual creation of country code in SAP sytem. As Country codes are used by many tables.
2. If we need new country codes for country settings of Serbia.
Then it can be done by using new SAP Basis (Netweaver) releases from release SAP_BASIS 710 or appropriate support pack. Then country precustomised setting of serbia can be done by upgrading support pack of basis.
The above alternatives are available. As country code is an important aspect & maintained at client level.
Please let us know which alternative would be suitable, Why.

I would recommend the basis way.
If you go the manual way - Go to T Code OY01.
Thanks,
Nandita

Is it possible to assign different company code employees(country grouping also different) under same Organizational Unit?

Hi SAP Experts,
In OM side, Org Unit is linked to company code "GB**" cost center, when we tried to assign new cost center(company code is GB**), system throws error "Company Code changes involves Invalid change of country". I know when we try to assign cost center, belongs to another country company code, this error comes. I checked and found that employees under OU belong to 2 different countries.Few of the employees belong to GB** company code while other employees belong to FI** company code.
Is it possible to assign different company code employees(different country code) to the same OU? if yes, how can we do that?
Please reply soon
BR,
RG

Hi RG
"Is it possible to assign different company code employees(different country code) to the same OU? if yes, how can we do that?"
Yes it is possible to assign by creating sub org unit and then assigning cost center based on the company code (and country code)
When the child org unit is created under the Parent org unit - maintain the Account assignment details - cost center details based on the company code of other countries i.e Finland and any positions created it will be under Finland and that way you can choose different countries.
Example :
Root Org unit : XYZ / OU
Sub Org units : GB / Finland / Italy / NL etc with respective cost centers
Sub Org units or positions: GB_HR / GB_Sales etc which will default the cost center from the GB org unit.
In our current clients we have more than 5 + countries under the Root Org unit and then sub org units as each country which are further divided and have respective cost centers assigned.
best wishes
V

AAR and Country Codes

Hi all,
We are about to deploy CallManager 4.1(3) in Europe, supporting several offices:
Paris (country code 33)
Munich (country code 49)
London (country code 44)
My question is about using AAR between these offices. Let's assume we have the following dial plan:
Paris: ext. 1111, external phone number 1111-1111
Munich: ext. 2222, external phone number 2222-2222
London: ext. 3333, external phone number 3333-3333
If Paris is dialing Munich and AAR kicks in, Paris will need to dial access code (00) + country code (49) + Ext. Phone Number (2222-2222).
I can put the 00 in the AAR Group, however I can't put the 0049 in the AAR group, because if Paris needs to dial London in the same scenario they will need to dial access code (00) + country code (44) + Ext. Phone Number (3333-3333).
I think each physical phone can only get 1 AAR group.
It appears to me I have two choices:
1. Put the country code in the External Phone Mask config, so (for example) Munich's Ext. Phone Number would be 49-2222-2222 and London's would be 44-3333-3333. The Paris' AAR Group would simply be 00.
2. Put translation patterns in each office. So - in AAR - when Paris dials 00-2222-2222 I translate it to 00-49-2222-2222 and when they dial 00-3333-3333 I translate it to 00-44-3333-3333.
#2 seems like it does not scale well at all. #1 seems to work well, does anyone have any suggestions? Has anyone hit this before?
Thanks - Rob.

AAR group dialing prefixes are used between two groups at any time. So you can define the country codes in the AAR prefix specified in the group.
So you will have three AAR groups (each go under the appropriate phone's line configuration)
AARParis will use 0049 to AARMunich
AARMunich will use 0033 to AARParis
AARParis will use 0044 to AARLondon
AARLondon will use 0049 to AARMunich
AARMunich will use 0044 to AARLondon
AARLondon will use 0033 to AARParis.
Refer to SRND for best practices on AAR.
http://www.cisco.com/application/pdf/en/us/guest/netsol/ns268/c649/ccmigration_09186a0080479538.pdf
HTH
Sankar
PS: please remember to rate posts!

Does any link exists where we can find Language code to Country mapping?

Does any link exists where we can find Language code to Country code mapping pls?

DrClap wrote:
>
You might be able to use the Locale.getAvailableLocales() method to get a subset of that list.
Use of getAvailableLocales() display the following: [Below is Language: Country values for AvailableLocales]
ar:
ar: AE
ar: BH
ar: DZ
ar: EG
ar: IQ
ar: JO
ar: KW
ar: LB
ar: LY
ar: MA
ar: OM
ar: QA
ar: SA
ar: SD
ar: SY
ar: TN
ar: YE
hi: IN
iw:
iw: IL
ja:
ja: JP
ko:
ko: KR
th:
th: TH
th: TH
zh:
zh: CN
zh: HK
zh: TW
be:
be: BY
bg:
bg: BG
ca:
ca: ES
cs:
cs: CZ
da:
da: DK
de:
de: AT
de: CH
de: DE
de: LU
el:
el: GR
en: AU
en: CA
en: GB
en: IE
en: IN
en: NZ
en: ZA
es:
es: AR
es: BO
es: CL
es: CO
es: CR
es: DO
es: EC
es: ES
es: GT
es: HN
es: MX
es: NI
es: PA
es: PE
es: PR
es: PY
es: SV
es: UY
es: VE
et:
et: EE
fi:
fi: FI
fr:
fr: BE
fr: CA
fr: CH
fr: FR
fr: LU
hr:
hr: HR
hu:
hu: HU
is:
is: IS
it:
it: CH
it: IT
lt:
lt: LT
lv:
lv: LV
mk:
mk: MK
nl:
nl: BE
nl: NL
no:
no: NO
no: NO
pl:
pl: PL
pt:
pt: BR
pt: PT
ro:
ro: RO
ru:
ru: RU
sh:
sh: YU
sk:
sk: SK
sl:
sl: SI
sq:
sq: AL
sr:
sr: YU
sv:
sv: SE
tr:
tr: TR
uk:
uk: UA
en:
en: US
Where, some of them have country values as blank. It seems strange..!! Any specific reason for blank country names?

Change the Mobile Country code and Mobile Network code BB sprint style 9670

I need to have a Sprint BB Style 9670 unlocked & Mobile Country code to use on Indian CDMA networks. It doesn't have a SIM card. Anyone have this problem or can point me to the proper way to unlock it? I chatted with Sprint but they don't want to do anything
Mukesh

Hi and Welcome to the Community!
Please refer to this helpful thread:
http://supportforums.blackberry.com/t5/General-BlackBerry-Functions-and/Unlocking-your-BlackBerry-Gu...
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Retrieving the Cell Site Id, Mobile Network Code, Mobile Country Code

Similar Messages

Maybe you are looking for