Retrieving the title of the application that has the focus
This question applies to Windows.
I wonder if it's possible with java to get the title of the application (this could be any application) that currently has the focus.
Thank you for any help
No. You would have to use Windows-specific JNI coding.
Similar Messages
-
Hello. I just upgraded to Lion OS X 10.7.3. I was previously running 10.5.7 which included the ENTOURAGE application. how do I retrieve needed information from this application that no longer runs on this new system?
The file you'll be looking for that has most of what you're looking for - messages, address book, etc. is the Entourage Database. The verison of Microsoft Office I run (on Lion) is Office 2008. By default the Entourage Database for this verison is at user/Documents/Microsoft User Data/Office 2008 Identities/Main Identity/Database. That folder (Main Identitty) also has your rules, signatures, and such. You'll have to recover this file from whatever backup you have. If you have a different version of Entourage, the file location will be a little diffferent.
Good luck
srb -
We have a legacy Forms application that has
We have a legacy Forms application that has been moved to the web. Now that it is executing using OAS9i, we are now providing an ASP offering for clients. The application consists of 210 Forms 6i screens, 130 Report Writer 2.5/6i reports as well as 150 C batch programs producing text reports in the Unix environment.
Clients are now asking for the ability to list and examine online reports saved to the filesystem.
Has anyone created a method of listing and displaying reports saved to the filesystem? We have a Unix utility that can convert C program text output to the PDF format.
Any help is appreciated.You might be able to do this without having to write a server-side java bean by doing the following:
web.show_document('http://webserver:port#/reports_dir');
if you just give the directory name and have no index.html in that directory then it should just give you a lisitng of the contents of the directory as links (all your reports that have been turned into PDF files) Your user could then click on the report they want and then the browser should be able to recognize the adobe file and display it without any forms code.
Hope this helps,
Candace Stover
Forms Product Management -
How to invoke a key press event in application that has focus
Even though I know there are programs out there already that do this similar function, I want to write my own program that converts MIDI events into keypresses. Here is how it would work:
- my program does not have focus, some other app has focus while my app runs in the backround
-a midi event happens
-a mapping is done by my app running in the backround: midi event->keypress
-my app causes a keystroke event to be sent to whatever application has the focus.
my problem:
The part I am having trouble figuring out is how to invoke a keypress to the application that has the focus. Can someone shed some light how this would be done? I have learned a little about the Text Services Manager but this just a component of Carbon. I'd think that I needed to talk to a much lower level part of the operating system to be able to send a keypress to ANY app that is running.
I would prefer to work in Carbon, c++
The thing that would make my midi-keystroke program different from others out there is a much more complex mapping algorithm between the MIDI event and the keypress chosen. That's why I want to write my own.
Thanks much anyone who can help!!
Jayquartz event services contains the calls needed to perform this function
-
I want to do a data recovery of my 15" MBP that has the flashing folder w/ ? mark in it, to an iMac 21.4"; how can i go about that?
DJSMACC wrote:
How do I go about removing the internal drive and mount it to an external enclosure @Linc Davis??? Sorry that I'm not too hip with all the technology lingo & etc?
You'll have to watch the video and buy a few tools to extract the driive.
http://eshop.macsales.com/installvideos/
Then use something like this to connect to the other Mac or PC with MacDrive installed.
http://eshop.macsales.com/item/Newer%20Technology/U3NVSPATA/
You also can get the same adapter elsewhere online for as low as $12 I've seen.
Likely it's a USB 2,1 which your Mac's can only accept USB 2,1 anyway, no need to pay more for a USB 3 unless you want too.
No compensation for site or product mention
You likely should be having a professional or Apple tech attempt to bypass the firmware password if you forgot it, it's the best way to go about things.
Just because the Mac has a spinning wheel gray screen at boot doesn't mean it's ruined, you just need to bypass the firmware password and then from there fix the machine's cause for not booting, which is likely a software issue from a third party kernel extension file.
Step by Step to fix your Mac
You should know that opening the iMac could likely ruin it and will ruin any warranty or AppleCare, and if it's a Early 2011 model or later you can't replace the hard drive yourself as Apple has proprietary software installed on the drive that needs to "talk" to OS X to control the fans speeds.
Good Luck. -
I have currently lost things from my notes and picture stream how do i retrieve them? My phone gets backedup very week on icloud but i still cant find those things that have been deleted on there own
Unfortunately, you cannot retrieve the pictures from iCloud without an Apple device.
-
How can I create an application that has no menu bar?
I have an application which has all of its functionailty available on screen as buttons or fields. This works very well at the moment. However when I create and run the application I see a men bar appears nuch the same as when deisgning the application namely, "File, Edit, Operate, Tools,, Browse, Windows, Help". I really don't want them to appear at all as everything is already catered for on screen. I have looked at the menu vi's but it is not clear how I can simply not have a menu bar.
Any suggestions?
Regards
KevinMany thanks,
I have asked a similar question to this before but for some reason I always think I need to do these sort of things programmatically in the code rather than in a settings.
Thanks in any case.
regards
Kevin -
We are using App-V 5.0 SP1.
I have a package that will need to get patched whenever new security updates are released. The first version of the application always works fine, but when I update the application and re-publish it, a normal user is unable to pull down the new version.
When this occurs I am able to get everything going by logging into the server with an admin account and performing a sync (Get-AppvPublishingServer | Sync-AppvPublishingServer; Get-AppvClientApplication"). What is it about applications that
have been updated that would cause this behavior?
The issue is similar to what the hotfix below addresses, but since we are on 5.0 SP1 I am unsure if this applies still.
http://support.microsoft.com/kb/2799153?wa=wsignin1.0
You publish a Version 1 package of an application on a server
You log on to the client by using a user account
You confirm that the Version 1 package of Application Virtualization 5.0 is synched, and then you log off the client.
You publish a Version 2 package of an application, and then you remove the Version 1 application
You log on to the client by using a user account.
The application is not published to the userHello,
Have you verified the event-logs if the attempt to publish the package is visible there (successful or failed)?
Nicke Källén | The Knack| Twitter:
@Znackattack -
Suddenly in Illustrator, the workspace window is too big: it extends under the application menu bar so I can't access the top and move it, close it, or minimize it. The sides and bottom extend so far out to the edges of the screen that I can't access the resizing corner. Help!
Thanks, Mort, I tried that, but it didn't work...maybe because I was already in the highest resolution?
I saw advice to someone whose itunes window was too large. They suggested applescript code:
tell application "Adobe Illustrator"
set bounds of window 1 to {296, 97, 1394, 996}
end tell
I replaced iTunes with illustrator, but got an error message:
Adobe Illustrator got an error: Can’t set window 1 to {296, 97, 1394, 996}.
thanks! -
Besides a few freezes here and there, my MacBook Air has worked fine. However when I opened it the other day, It wouldn't power on. I pressed the power button a few times, and it finally powered on with a completely white screen. I powered it off and on a few times but nothing changed. I figured if I let the battery die, maybe it would work when I charged it again. I left the screen open, but after 10 min, a flashing folder with a question mark popped up, And it's been flashing ever sense. I took it to apple, they said it was a software issue. They plugged it into a g-drive to reinstall, along with other cords and got their apple account up, although none of my information showed up. They said the Mac forgot its software, and nothing of mine would show. They said I have to replace the lap top and gave me prices/options. I never got my question fully answered on if I can retrieve my photos, notes, garage band, music, etc. I left apple with out any trade. Does anyone know of any way I can get my pictures, music, voice memos, and notes, back? I'm desperate and have lots of important stuff that I can't access. I'm also losing work not having access to my computer. But I'm not trading it in until I try/or know there is no way to get my stuff back. I will pay anything to get my stuff back! I honestly would rather have my stuff then the computer. And just get a new one. Any advice will help. Thanks!
a flashing folder with a question mark popped up,
Can mean that your Mac can't find a system folder to boot from.
Try restarting while holding down the Option key. That should prompt the Startup Manager window where you can select the startup disk and restart.
Startup Manager: How to select a startup volume
If the disk is not available, then it's failing or has failed.
If you did not backup your important files, an alternative would be data recovery but it's expensive.
One suggestion > Data Recovery by DriveSavers -
I am writing control software for a process that is usually dull and
requires only 10 Hz acquisition rate. At particular times during
the sequence, however, we are interested in looking at a couple of
channels at 1000 Hz. My approach so far is to configure my
Buffered DAQ to run at the higher rate at all times. When we are
in the 'high-speed DAQ' mode, the program logs every point to
disk. In the 'low-speed' mode, I am picking off every nth (in
this case, 10th) point to log to disk. At all times, I update my
GUI indicators on the front panel at a maximum of 4 times per second (I
find that anything faster results in an uncomfortable display), so I
fill up a FIFO with data in my acquisition / logging loop, and read the
FIFO in the display loop. The data in my GUI display can be up to
250 milliseconds off, but I find this acceptable . As a side note, I
need buffered Daq with hardware timing, as software timing results in
lost data at 1000 Hz.
This all works fine and dandy, but I am convinced that it is not the
most elegant solution in the world. Has anyone developed a
buffered DAQ loop where the scan rate can be adjusted during
operation? I would like to change the rate of the E-Series card
rather than relying on down-sampling as I am now doing.
The reason I have concern is that at the moment I am simulating my AI
using MAX and when running the down-sampling routine, I consistently
miss a particular event on the simulated data becuase the event in
question on the simulated data always occurs at the same 'time', and I
always miss it. Granted, while it is unlikely that my measured
signal and my acquisition are perfectly synchronized in the real world,
this particular situation points out the weakness in my approach.
More than anything, I am looking for ideas from the community to see
how other people have solved similar problems, and to have you guys
either tear apart my approach or tell me it is 'ok'. What do you
think?
Wes Ramm, Cyth UK
CLD, CPLIAdding to Alan's answer:
One of the problems that comes with these tricks for variable-rate acquisition is being able to match up sample data with the time that it was sampled.
If you weren't using either of E-series board's counters, there is a nifty solution to this! You'll be using 1 of the counters to generate the variable-rate sampling clock. You can then use the 2nd counter to perform a buffered period measurement on the output of the 1st counter. This gives you a hw-timed measurement of every sampling interval. You would need to keep track of a cumulative sum of these periods to generate a hw-accurate timestamp value for each sample.
Note: the very first buffered period measurement is the time from starting the 2nd counter until the first active edge from the 1st. For your app, you should ignore it.
-Kevin P. -
Looking for an application that has great time stretch capabilities
Hello all,
I have Logic Pro 8 and I am still learning its capabilities. I do alot of sound design stuff and am looking for a spectacular time stretching application. I've fiddled with Logic's time stretch algorithms but so far I'm not thrilled with the results. I'm interested in really stetching things out to create new sounds. Here is a great example from Nine Inch Nails. It's a remix of Eraser off of Further Down The Spiral.
This particular remix version is called "Erased, Over, & Out." Here is an amazon link to have a listen.
http://www.amazon.com/gp/product/B000VZOBGI/ref=dmmu_dptrk11?ie=UTF8&qid=1212078077&sr=1-1
The vocals are EXTREMELY stretched out and take the form of a pad almost.
He is actually saying, "Erase me." Keep in mind the original vocal is only about 3 seconds long. I'd like to provide that example but the Amazon sample isn't long enough to get to that part. Maybe download it to listen. It's called Eraser, it's from "The Downward Spiral" album. (1994)
Now, does anyone know if Logic is capable of getting this good a result like the sample I provided? I've seen PT Elastic Time stretching capabilities and it sounds awesome, at least what I've heard from their demo video on elastic time. Can the same results be achieved in Logic Pro 8?
If not, what plugin do you recommend that could achieve this EXTREME time stretching stuff. Or, does anyone know what Nine Inch Nails used to get that effect on the vocals for that particular remix? I just think it's a limitless tool for sound design, but right now I'm feeling limited in the sound quality department. I know I can keep stretching and stretching and stretching the sample region but that sounds a digital mess when I get it to the point were I want it, so please, don't suggest I do that, unless you know a way to make it sound REALLY GOOD in Logic using the algorithms that come with the program. Step by step info would be lovely.
Thanx in advance...
TTW13ported to the Mac
it's on my other Mac
is their a Mac version?
It seems a safe bet, eh..?
I'm pretty sure the mac link was posted to that thread I linked to, it's where I found out about it...
http://www.bigbluelounge.com/forums/viewtopic.php?t=35638&highlight=&sid=c2dcbfd c2af80e0fdf9da04b91319e1d -
Write a desktop application that has sudo privlages?
Hi,
I'm writing a GUI frontend to Netcfg in C++ and am nearing 1.0 version. The problem is that since netcfg needs root privlages, right now it's nessesery to run it using sudo. I'd like the user to be able to run it without sudo, for example in startup scripts. I know it's possible, networkmanger wicd archassistant and every other program of simular nature does it. Can someone point me in the right direction? I searched in google but did not find a good solution.Xyne wrote:
If the frontend is a binary executable (as it must be in this case if you are writing it in C++) then you can use the setuid flag:
https://en.wikipedia.org/wiki/Setuid
http://www.techrepublic.com/blog/securi … urity/2857
For reference, if it is a script (Bash, Python, Lua, etc.) then setuid will not work because it is not the script but rather the interpreter that is executed.
This may also be of interest:
https://wiki.archlinux.org/index.php/Us … _Of_Setuid
Incidentally, I believe that netcfg will soon be replaced by netctl so you may wish to redirect your efforts now to avoid wasting them.
Xyne that is most helpfull, thank you. And don't worry, I'm mainly doing it to learn C++ and Gtkmm. Worst case scenerio I change the system calls to netcfg and convery my project (-: -
Get a handle on an application that has already been launched
Hi all,
My requirement is to get a handle on my application if it is already launched. This is because whenever a client clicks on a link to the swing app, it should not open a new instance, instead it should use the existing application if it is running. A new instance should be created only if there is no other instance of the application running.
Please help ASAP
Thanks in advance,
ZeusIf you are using Java 5, you could use the JNLP SingleInstanceService: http://java.sun.com/j2se/1.5.0/docs/guide/javaws/jnlp/javax/jnlp/SingleInstanceService.html
-
Is there any way to have " iTunes" or downloaded music @ no charge on my iPad?
Most commercial music is not available for free. For some strange reason, the artists and record companies want to get paid for their work. Most of the sites that purport to be "free" are scams or just links to the pirate networks. There are some legitimate sites that offer legally-free music, usually from indie bands who release their work for free to get their names out into the public. Here are a couple to get you started:
http://freemusicarchive.org
http://www.last.fm/music/+free-music-downloads
Regards.
Maybe you are looking for
-
FatalUserException / One-Many relation relinking
Hello all, I have a problem with one-many relations and relinking... Let's have a relation one-many between class Task and itself (classic parent-children problem). Initial Context - T1 has 2 child (T2, T3) What i need to do : move T3 as child of T2
-
Are there any fixes for iPad 2 with OS 8.1.1.
Are there any fixes for the iPad 2 IOS 8.1.1? I've had problems with Safari and other Apps crashing or locking up, and with extremely slow touch response. These problems have been occurring since the last update. At times the iPad becomes unusable
-
Organizing itunes U downloads in itunes
Hello I would like to organize my content "by provider", rather than by collection, or release date. I mean by this that I have a file for all the content and courses that come from Stanford University, and another for all the content from McGill Uni
-
Database Resource Manager CPU levels
Hi, I'd like to employ the Database Resource Manager to limit some user's sessions to a certain amount of CPU. After reading the documentation and an Oracle white paper, I'm still not clear on the difference between splitting the CPU allocation at le
-
How do I turn off automatic Pages updates?
I strongly dislike Pages 5.0. For the past few months I have been deleting Pages 5.0 every time it is automatically re-installed on my MacBook Pro. Now I want to stop these updates/reinstallations. I just bloody don't want that software at all, it