Retry on SFTP send Adapter

Hi All,
I have a scenario where I am sending the EDI file via SFTP adapter to external partner.
On the SFTP port configuration I have set Retry count=3 for every 5 mins.
This send port I have configured on Agreement to specify which agreement to use for outbound EDI's.
whenever I am sending invalid EDI file(few Mandatory Fields are missed), I could see error in the event viewer showing the exact reason for failure. and The port is retrying to send the same message hence I could see 3 errors on the event viewer.
My assumption was--Retry works only in case of Communication failure but here it is behaving differently.
Can somebody explain how it is behaving like this.
Thanks & Regards,
Ammu.

Hi Ammu,
Whenever any failure occurs at the send port in any stage, End point manager suspends the send port and performs retry operation.
Which means it will again subscribe message from messageboxdb and perform all the execution again.. which will include pipeline, outbound map if any and adapter.
Let us know if you still have any query.
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful.

Similar Messages

Seeburger SFTP Sender Adapter Failure

Hello,
a SFTP sender channel causes the follow error when executing a poll cycle:
SFTP Adapter failure Details: while trying to invoke the method com.seeburger.uri.dt.sftp.schema.DtSFTPPollingResponse.setSuccessMessage(java.lang.String) of an object loaded from local variable 'e'
The server was pinged successfully so there should be no firewall issue. We are also able to logon to the server using a third-party SFTP client.
The error description is not very meaningful for tracking down the root cause.
Do you have any idea what could have caused this error?
Thank you.
Edited by: Guppenberger Florian on Jan 24, 2011 4:00 PM

For the Roll back error plz chk the below points.
1. Check the module parameters.
2. Make sure the sender agreement doesnt have any * 's.
Ex: The SA should not be like : | BS | SI_test_oa | * | *
SA should be like BS | SI_test_oa | |
3. If the input file has special chanracters , use the encoding .
If the above doesnt work, try to create a new communication channel and test it.
We also faced this error toomany times in the sender CC for sFTP advatco adapter.
Thanks,
Soumya.

SFTP   Sender adapter error

HI All
    I am   facing a error in sender SFTP   adapter
Error: Current transaction is marked for rollback: Trace of setRollbackOnly() invocation. (Software version: 3.0.17)

For the Roll back error plz chk the below points.
1. Check the module parameters.
2. Make sure the sender agreement doesnt have any * 's.
Ex: The SA should not be like : | BS | SI_test_oa | * | *
      SA should be like BS | SI_test_oa | |
3. If the input file has special chanracters , use the encoding .
If the above doesnt work, try to create a new communication channel and test it.
We also faced this error toomany times in the sender CC for sFTP advatco adapter.
Thanks,
Soumya.

PayloadZipBean in SFTP sender adapter

The senario is : the sender channel uses the ZIP module. The sender and receiver adapters are SFTP and there is no Message mapping. The sender channel zips the text file. However the Sender cahnnel is green is Communication cannel monitoring but fails at SXMB_MONI with error message "No interface determination found for outbound interface XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX: Error while determining root tag of XML: BOM / charset detection".
Configuration module tab in sender channel corresponding to PayloadZipBean module:
zip zip.fileNameKey Content-Type: text/plain; name="name.txt"
zip zip.mode zip.
Please advice.

1) why dont you use the zip module on the Receiver channel?
2) if sender is doing a zip, the payload (message) wont match with that of the one in your interface (SI/ MI)

Need Help in Creating adapter module for SFTP Sender in NWDS

Hi experts,
I have a scenario where i should write an adapter module for SFTP sender in NWDS.. need your help in achieving this..

Hello,
>>i have followed the procedure of FTP but, adapter is not picking the file
Make sure u have written proper expression to pick file.
>>do we have any different adapter parameters for SFTP... the input file is .csv..
I don't think there are any specific parameters needed for SFTP (but in case u are reading file name in AM then u might have to adjust SFTP namespace)
Thanks
Amit Srivastava

How many times does the JDBC sender adapter retry ?

Hi All,
How many times does the JDBC sender adapter retry in the ' Retry Interval' specified .
I know that it retries after the time specified in the ' retry interval' , but if it again fails after the first retry will it retry again and again .And while doing it will it block the next Select query which should get executed.
Thanks & Regards,
Rahul

Hi,
The no of times to be retired on failure of message is default 3 times.
You can set this in Visual Administrator->Server->Services----> SAP XI Adapter
Thanks
Swarup
Edited by: Swarup Sawant on May 30, 2008 7:19 PM

Issue in receiver SFTP seeburger adapter

Dear all,
We have a proxy to sFTP scenario.
The target message is being delivered to a sFTP system using a receiver sFTP Seeburger adapter.
I have this error being shown in the receiver channel.
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: >> Description: putFile: Target filename <TEMP_20110406_115127.TXT>; Flags set: appending=<false>; useTempFile=<false>; ; Reason: Failure>> Details: putFile: Target filename <TEMP_20110406_115127.TXT>; Flags set: appending=<false>; useTempFile=<false>; ; Reason: Failure>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMPONENT_ERROR>>Retryable: true>>Fatal: true, >> Description: putFile: Target filename <TEMP_20110406_115127.TXT>; Flags set: appending=<false>; useTempFile=<false>; ; Reason: Failure>> Details: putFile: Target filename <TEMP_20110406_115127.TXT>; Flags set: appending=<false>; useTempFile=<false>; ; Reason: Failure>>SendingStatus: NOT_TRANSMITTED>>FaultCategory: COMPONENT_ERROR>>Retryable: true>>Fatal: true.
The Seeburger WorkBench monitoring has a 2 error entries which says
1. PUT command for file <TEMP_20110406_115127.TXT> is in progress.
2. "Error on send, will be retried"
Finally, the .txt file is partially written in the receiver system.
If anyone has any inputs/pointers to resolve this issue. Pls share the details.
regards,
Jack.

Hi Jack,
We are also facing the same problem with the seeburger SFTP adapter. If you find the solution , Plz let us know.
Thanks,
Soumya.

Issues in File Content Conversion in a Sender Adapter

Hi Folks ,
The XMl Structure of my input file is
<?xml version="1.0" encoding="UTF-8"?>
<ns:file_sender_mt xmlns:ns="urn:filetofiledemo">
<recordset>
 <data>
 <name />
 <city />
 <age />
 </data>
 <adress>
 <fnaame />
 <lanme />
 </adress>
</recordset>
</ns:file_sender_mt>
In my file conversion paramaters i have mentioned
data.fieldSeparator ,
data.fieldNames name,city,age
adreess.fieldSeparator ,
adreess.fieldNames fnaame,lanme
ignoreRecordsetName true
recordset.fieldSeparator ,
data.endSeparator ,
I fail to understand when in my input file
i give
1,2,3
4,5
ie value of data and adrees on diff lines it works fine
bt when i give the imput as 1,2,3,4,5
it fails in adapater
giving the exception
Sender Adapter v1014 for Party '', Service 'filetofile_bs':
Configured at 12:11:43 2006-07-18
Last message processing started 05:22:34 2006-07-19, Error: Conversion of complete file content to XML format failed around position 0 with java.lang.Exception: ERROR converting document line no. 1 according to structure 'data':java.lang.Exception: ERROR in configuration: more elements in file csv structure than field names specified!
last retry interval started 05:22:34 2006-07-19
length 10,000 secs
I dont understand why i am getting this error as my data.endSeparator is ,
any inputs on this would be of grt help
Thanks
Amit

Mam if you look at my XML
<?xml version="1.0" encoding="UTF-8"?>
<ns:file_sender_mt xmlns:ns="urn:filetofiledemo">
<recordset>
 <data>
 <name />
 <city />
 <age />
 </data>
 <adress>
 <fnaame />
 <lanme />
 </adress>
</recordset>
</ns:file_sender_mt>
I have 5 paramaters
name ,city ,age , fnaame , lname
and i am pasing those 5

AS2 error The FILE send adapter cannot open file

I have AS2 setup under biztalk. I have receive port which listen to HTTP adapter and keep listening on web site.Then there is corresponding send port which just write that file in folder . Send port just have filter for Receive adapter name.
It works fine, but some time I get error message
The FILE send adapter cannot open file <folder name\guid.txt > for writing.
Details: The system cannot find the path specified.
I am not able to understand what is error for this? Please help me to figure-out this.

Specifying the Backup transport is not going to solve the problem. Specifying the backup transport in this case is something like addressing the symptom of the issue and not finding the solution to root cause of the issue.
As you specified, if the mentioned error only happens some time but not always. In this case, the message "The
FILE send adapter cannot open file <folder name\guid.txt > for writing." would just be a warning message. Just by setting the retry in the send port will solve the issue. i..e Since this issue occurs rarely, it may be short lived glitch.
So by setting the retry count (lets say 3 times) with retry interval (let say 5 mins), this issue can be easily mitigated. You would not lose the message. So during the glitch you would get this message as warning, send port will retry "after specified
retry interval so after 5 mins", so by that time chances of files transfer is high. So this problem can be easily handled just by having retry count and retry interval in send port.
But you need to find the actual cause for this issue or you need to find the permanent resolution for this issue.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

JDBC Sender Adapter - No Namespace found

Hello
I am currently using PI 7.1. The scenario is JDBC to ECC ABAP Client Proxy. When the JDBC Sender Adapter sends the data to the Integration Server, the root element does not contain the xmlns attribute. This root element is constructed from the Document Name of the JDBC Sender Adapter attribute.
I am getting the following error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_HIS_Material_Consumption_</SAP:P1>
<SAP:P2>com.sap.aii.mappingtool.tf7.IllegalInstanceExcepti</SAP:P2>
<SAP:P3>on: Cannot create target element /ns0:MT_Material_</SAP:P3>
<SAP:P4>Consumption_ECC/Material. Values missing in queue~</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_MM_HIS_Material_Consumption_; com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ns0:MT_Material_Consumption_ECC/Material. Values missing in queue~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
When I perform a test at RWB, the message gets posted successfully. Once posted, the payload of this message contains the xmlns attribute.
Here is the root element from both the instances:
From RWB: <ns0:MT_Material_Consumption_JDBC xmlns:ns0="http://xxx.com/xxx/finance">
From JDBC Adapter: <ns0:MT_Material_Consumption_JDBC>
Could you please let me know, what has to be done to obtain the xmlns in the sender payload?
Thank you in advance.
John Jeyaraj
Edited by: John jeyaraj on Apr 7, 2011 8:22 AM

Hi Hiren
When I test the MM without the xmlns attribute, I get the following error:
The prefix "ns0" for element "ns0:MT_Material_Consumption_JDBC" is not bound.
When I add the xmlns attribute, the mapping is successful.
Thanks
John

J2SE File Sender Adapter Error

Hi Experts,
I am doing a scenario on J2SE. Like this: J2SE File Sender -> XI -> J2SE File Receiver.
On File Sender adapter, it has an error, like this "ERROR: Finished sending to Integration Engine with error u201Cjava.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 404 Not Foundu201D. Skip confirmation and quit this loop"
And this is the full log:
D:\Thach\Input\xi_test.xml
16:51:45 (4052): Start processing u201CTXTu201D file u201CD:\Thach\Input\xi_test.xmlu201D size 190 in u201CEO mode
16:51:45 (4058): Start converting to XML format
16:51:45 (4061): Converted complete file content to XML format
16:51:45 (4062): Sending text message u201Ce1ffc9e0-71e5-11de-8306-0019d12044f1u2033 type u201Capplication/xmlu201D to Integration Engineu2026 (message size: 633 bytes, URL: u201Chttp://host:50200/sap/xi/engine?type=entryu201D)
16:51:45 (4076): ERROR: Finished sending to Integration Engine with error u201Cjava.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 404 Not Foundu201D. Skip confirmation and quit this loop
16:51:45 (4077): Retry mode - wait 10 sec, 0 msec interval before retry
And this the content of xi_test.xml:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Material_toPPS xmlns:ns0="http://gml.com/xi/XI/Tutorials">
 <Material>
 <Text>Test</Text>
 </Material>
</ns0:MT_Material_toPPS>
And this the configuration of J2SE File Sender:
mode=FILE2XMBWITHROWCONVERSION
XI.TargetURL=http://host:50200/sap/xi/engine?type=entry
XI.User=PISUPER
XI.Password=*********
XI.QualityOfService=EO
XI.SenderParty=
XI.SenderService=BS_PlainJ2SE_Sender
XI.ReceiverParty=
XI.ReceiverService=BS_FileRecv
XI.Interface=MI_Material_toPPS_OB
XI.InterfaceNamespace=http://gml.com/xi/XI/Tutorials
file.type = xml
file.sourceDir=D:
Thach
Input
file.sourceFilename=xi_test.xlm
file.processingMode=test
file.pollInterval=10
#Content conversion parameters in PlainJ2SE Adapter
xml.documentName = MT_Material_toPPS
xml.documentNamespace = http://gml.com/xi/XI/Tutorials
xml.structureTitle = Material
xml.processFieldNames = fromConfiguration
xml.fieldNames = Text
Please help to solve the issue.
Thanks so much,
vn thach

The URL of the Integration Server is wrong or you cannot access the server from the host, where the J2SE adapter is running:
XI.TargetURL=http://host:50200/sap/xi/engine?type=entry
If the Client of the Integration Server is not 000, then you have also to add that line:
XI.Client=XXX

JDBC Sender Adapter Error

HI Friends,
I have configured the JDBC Sender Adapter with parameters as
Driver : oracle.jdbc.driver.OracleDriver
Connection : jdbc:oracle:thin:system:netweaver:@172.25.4.221:1521
But Iam getting an error in Componenet Monitoring:
History:
- 2006-05-30 04:55:36 UTC: Error: Stopped unexpectedly - reconfigure and activate to continue processing. Error: java.lang.NullPointerException
- 2006-05-30 04:55:36 UTC: Processing started
How to resolve this??
Regards,
Raju

Hi
Thanks for the reply.
I tried with jdbc:oracle:thin:@172.25.4.221:1521:netweaver and
jdbc:oracle:thin:@172.25.4.221:1521:system
Now Iam getting another error.
Sender Adapter v2108 for Party '', Service 'TBIT40_XI_LEGACY_BS_04':
Configured at 2006-05-30 05:12:30 UTC
History:
- 2006-05-30 05:13:00 UTC: Retry interval started. Length: 20.000 s
- 2006-05-30 05:13:00 UTC: Error: Accessing database connection 'jdbc:oracle:thin:@172.25.4.221:1521:system' failed: DriverManagerException: Cannot establish connection to URL 'jdbc:oracle:thin:@172.25.4.221:1521:system': SQLException: Io exception: Connection refused(DESCRIPTION=(TMP=)(VSNNUM=153093376)(ERR=12505)(ERROR_STACK=(ERROR=(CODE=12505)(EMFI=4))))
- 2006-05-30 05:13:00 UTC: Processing started
Can U please solve it..
regards,
Raju

Seeburger SFTP - File Adapter -- Filename in reciever channel

I am using a Seeburger SFTP Sender channel, and a "FILE" channel configured to use FTP.
I need to have the FTP adapter to write the file name as it was sent by the SFTP adatper.
I looks like I will need to use variable substitutions to do this, but I can't figure out how to populate a variable with the http://seeburger.com/xi/common/dtSubject that contains the file name from the SFTP Adapter.

All you need is 1 UDF that retrieves the value of dynamic configuration. The name space is http://seeburger.com/xi/common/dtSubject as you said. I am not sure the technical name for FileName for Seeburger adapter. But you can see this in SXMB_MONI under the dynamic configuration node. Using this value populate the dynamic configuration with name space http://sap.com/xi/XI/System/File and technical name FileName. This represents the file name for standard File adapter.
Regards
Jai

RFC sender adapter doesn't reconnect after a R/3 down

Hi everybody,
We are in PI 7.0.
The RFC sender adapter doesn't reconnect automaticaly after a shutdown/restart of the R/3 system.
Theoritically, the system should retry after 2, 4 .... 3600 seconds but it doesn't do.
Is there anybody who have an idea ?
Thank in advance.
Best regards.
Eric.

After the restart of R/3 system , when I look in SM59, I receive the answer that the program is not registered ( RFC sender adapter) .
As I told in my previous post, since the RFC adapter has lost the connection, the RFC destination is not registered. Just try to stop/start the channel and reactivate. the destination should work fine then.
I read in documentation that is done automatically but that is not the case.
Thats right. but it doesn't happen usually. probably u can ask SAP to explan this with an OSS

Get filename from file sender adapter

Hi Experts,
I have a question regarding the file/ftp adapter (sender).
I have a directory with xml and pdf files. for every xml file there is a pdf file with the same filename. for example:
file1.xml
file1.pdf
file2.xml
file2.pdf
file3.xml
file3.pdf
Now I want to read the xml file with the file sender adapter. afterwards I want to read the related pdf file. for example: If I read the file file1.xml afterwards I want to read the pdf file file1.pdf with the file sender adapter. For this it is nessessary to get the filename from the xml file so that I can read afterwards the pdf file. How can I realise it?
Thanks and best regards
Christopher

Hi srinivas,
thanks for your quick answer.
That the file adapter is not able to read pdf files is clear to me. In this case I only want to transport the pdf. that works fine. I tested it.
the problem is the following:
I have a xml file with the name "file1.xml". I read the xml file with the sender file/ftp adapter configured with filename "*.xml". Then I want to import the pdf file with the name "file1.pdf". Therefor I need the filename from the xml file.do you know what I mean? So XI has to know the filename of the xml to import the pdf with the same name ...
regards

Retry on SFTP send Adapter

Similar Messages

Maybe you are looking for