Return code For DataStore objects and InfoObjectsb
Hello Gurus,
For DataStore objects and InfoObjects: you cannot use the
return code in the routine for data fields that are updated by being
overwritten.
as per above statement, why ?
Many thanks,
Frank Zhang
How you creating this file? Why you couldn't create without enter?
But, however, see solution in that case:
File 1.sql:
select 1 from dual;File 2.sql:
select 2/0 from dual;File 3.sql:
select 3 from dual;File exec_sql.sql:
WHENEVER SQLERROR EXIT
@&1
@&2
@&3And you need to generate file as this "test.sql":
define f1 = 1.sql
define f2 = 2.sql
define f3 = 3.sql
@exec_sql &f1 &f2 &f3Regards,
Malakshinov Sayan
Similar Messages
-
Transaction code to find return code for transport request
Hi,
I want to see the return code for transport requests after importing to QAS from DEV. What is the transaction code to find return code and can you explain in brief.
Thx,
Vasuyou can check it out in STMS
wht you can do is ,,
Run Tcode STMS > Overview imports (F5) > you will find all import queues > then click on the import queue in which u want to see the status of transport (DEV , QAS , PRD )
> then find out the transport no > click on that > then click on logs or press ( ctrl + f4)
Return code
Meaning
0000
Transport performed without errors
0004
Warnings were issued. All objects were transported successfully. There were special actions for individual objects that may not have been intentional, for example, a warning is issued during the export if the request contains an object deletion.
Read the warnings.
0008
Individual objects could not be transported successfully. You must analyze and correct the errors. Examples of import errors: Original object was not overwritten, Repaired object was not overwritten
0012 or higher
A critical error has occurred, probably not caused by the contents of the request. You must inform your system administrator.
http://help.sap.com/saphelp_nw70/helpdata/en/57/38e26c4eb711d182bf0000e829fbfe/content.htm
Hope this information will help you ,,
Cheers
dEE -
T-code for cancelled Invoice and cancelled Excise Invoice
Dear Guru,
kindly let me know the T-code for cancelled Invoice and cancelled Excise Invoice.
Wishes,
AbhishekHi Abhishek,
I am not aware of any T-code through which you can see the cancelled invoice. I think either you have to go for development (SQVI)
or
Extract the list of your all billing document like billing document created from 01.01.2010 to 22.04.2010
Now go to SE16 --> Table VBFA --> Give your billing document number in field "Preceding Doc." --> and in the field "Subs.doc.categ." --> choose entry "N Invoice cancellation" --> system will show you all the entries for which cancellation billing document has been created.
or
Go to SE16 --> Table VBRK --> enter your billing document list --> In the field "Posting status" --> Choose option "E Billing Document Canceled"
Hope it helps,
Regards,
MT -
Is there example code for using Ni488 and PCI-GPIB card in non controller mode?
Is there example code for using Ni488 and PCI-GPIB card in non controller mode?
cymrieg,
Your code looks good to me. What is the problem? What happens when it fails? What is the IBSTA value on the controller, and at what point in the code does it stop? What is the IBSTA value on the slave, and at what point does it stop?
One thing is that you might not want to call IBCLR() in a loop on the device. At the beginning of the program is fine...This will send a clear command to the device and will clear out any LACS and TACS bits that might be set. Also your IBDEV call shouldn't be in a loop.
Hope this helps, but let me know if you need more information.
Scott B.
GPIB Software
National Instruments -
Hi basically when i try download a app its saying sign in required ask for sercurity code for bank card and i put the correct details in and still saying its invalid? Can anyone help
Refusal of a card is based on information provided matching what is on file from your credit card provider. If it is refused, it generally means something is not matching. That can inclue the name, the address or other information. It has to be exact to match. If you check your credit card bill to make sure you are spelling the name correctly, the address is listed correctly, and yes, ST is different than Street, and it still does not work, contact iTunes support. http://www.apple.com/emea/support/itunes/contact.html
-
Error handling return code for Provide Statement
Hi Experts,
For select statement we have error handling return code sy-subrc.
What is the error handling return code for provide.. end provide statement.
Thanks,
RaguRagu,
Same thing.
Check sy-subrc.
sy-subrc is the return code for all ABAP statements as far as I know.
Regards,
Dilek -
Choosing the Return code for a scenario
Hi,
I execute an ODI scenario "AAA" from Unix with the command startscen.sh
Can I control the return code of called screnario?
IN the scenario "AAA" (=package) i have different path with ko/ok. I would like to choose a specific return code for each ko path. Is it possible ?
Thank you very much.
Best regards,How you creating this file? Why you couldn't create without enter?
But, however, see solution in that case:
File 1.sql:
select 1 from dual;File 2.sql:
select 2/0 from dual;File 3.sql:
select 3 from dual;File exec_sql.sql:
WHENEVER SQLERROR EXIT
@&1
@&2
@&3And you need to generate file as this "test.sql":
define f1 = 1.sql
define f2 = 2.sql
define f3 = 3.sql
@exec_sql &f1 &f2 &f3Regards,
Malakshinov Sayan -
How to write code for page up and page down buttons on alv screen?
Hi,
Page up and page down buttons are not working in general alv report. Thease buttons are in disable mode. But is stnd. transactions (tcode : fbl5n) these are enabled and working properly, but we can't debug this with /h
How to write code for page up and page down buttons on alv screen?Poonam,
On doing the screen debugging it took me over to Include LSTXWFCC ,kindly check the below code.
module cc_display.
fcode = sy-ucomm(4).
case sy-ucomm(4).
when 'P--'.
perform cc_firstpage.
when 'P-'.
perform cc_prevpage.
when 'P+'.
perform cc_nextpage.
when 'P++'.
perform cc_lastpage.
when 'EX--'.
perform cc_firstcopy.
when 'EX-'.
perform cc_prevcopy.
when 'EX+'.
perform cc_nextcopy.
when 'EX++'.
perform cc_lastcopy.
I guess it can give you some lead.
K.Kiran. -
Not Getting Verification Code for OpenWap, Liquoi and Connect A2 App
I Have purchased the Firefox OS phone but i am Not Getting Verification Code for OpenWap, Liquoi and Connect A2 App
Unfortunately, we do not provide support for apps. You should contact the developer of the app for more information. From what I can see, you are not getting anything from all apps. A simple thing you can to do is to reboot the phone.
To reboot your phone:
#Take the back cover of the phone off.
#Take the battery out.
#Take the SIM card and microSD card out (if applicable).
#Wait 10 seconds.
#Put the SIM card and microSD card back in (if applicable).
#Put the battery back in.
#Put the back cover back on.
#Turn the device on.
#Check if the issue you were having is still present.
Please report back to us if this solved your problem!
Thank you -
I had an itunes redemption code for a movie and got the following message, "code redemption temporarily unavailable. try again later." How do I get my movie?
Hi r.viel,
I'm sorry to hear you are having issues with your redemption code.
The following article should help you with this:
iTunes Store: Invalid, inactive, or illegible codes
If you're still unable to redeem your code after verifying the characters in the code, you'll need to contact iTunes Store Support for help. You'll need to provide a digital image of the front and back of the gift card as well as the sales receipt for the purchase of the gift card.
Contacting iTunes Store Support
Go to the iTunes support page and select your iTunes country.
From the iTunes support page, choose Contact Support on the lower-left side of the page.
Follow the instructions to get iTunes Store support assistance.
I hope this information helps ....
Have a great day!
- Judy -
Transacton codes for production support and process chain
hi guys,
please any one tell me the Transacton codes for production support and process chainFor event creation - SM64
For Job - SM36 to Define . However for process chains you can define job in Start Process maintenance itself.
Regards.
Sanjay -
HT1222 i have a code for my ipad and i did not remember it
i have a code for my ipad and i did not remember it
http://support.apple.com/kb/ts4268
-
How to code a method that returns string for class object
I have a class named Address.
public class Addresss{
private String street;
private String city; // instance variables
private String zipcode;}I have been asked to write a method that returns a string for Address object. I dont understand how to create address object.Can anyone pls help me understand.
do I have to write (for creating object)
Address addressObject = new Address(); ( coding method that returns a string for address object) ---> I really dont understand this part.looks almost right. The problem is that your method name AddressBookEntry does not match the name of your class AddressBook and therefore is not a constructor.
Furthermore, you probably need to make a distinction between a single entry into the address book which consists of a single name and a single address, (which is just what you have done) and an address book itself which is probably a list of AddressBookEntries
So for your code I would change the class that you called "AddressBook" to "AddressBookEntry" and have a third class that represents the collection of AddressBookEntries.
Now to be honest, I don't know why you keep the name split apart from the street address portion of the address. I would be more inclined to keep the name as a field of the address itself, but it's your code, you carve it up the way you like. -
Throws Exception in main and return code for JVM
Hello,
Could someone tell me what the following statement :
public class Foo {
public static void main(java.lang.String[] args) throws Exception {
// Some source code
is supposed to do with the return code of the VM when the Exception is thrown.
I mean what num�ric value is supposed to return the following instruction :
java -classpath ... com.app.Foo
Because my Java program is run in a script shell which is supposed to get a return code which as to be interpreted.
Off course I am not allowed to do the test myself because this script shell is executed on a production server ...I don't know what the return code will be, but you could do this:
public static void main(String[] args)
try
// ...Run the program here...
catch (Exception e)
// Print the stack trace
e.printStackTrace();
// Exit with an error code
System.exit(10);
}Jesper -
Object and reference accessing for primitives, objects and collections
Hi,
I have questions re objects, primitives and collection accessing and references
I made a simple class
public class SampleClass {
private String attribute = "default";
public SampleClass()
public SampleClass(SampleClass psampleClass)
this.setAttribute(psampleClass.getAttribute());
if (this.getAttribute() == psampleClass.getAttribute())
System.out.println("INSIDE CONSTRUCTOR : same object");
if (this.getAttribute().equals(psampleClass.getAttribute()))
System.out.println("INSIDE CONSTRUCTOR : equal values");
public void setAttribute(String pattribute)
this.attribute = pattribute;
if (this.attribute == pattribute)
System.out.println("INSIDE SETTER : same object");
if (this.attribute.equals(pattribute))
System.out.println("INSIDE SETTER : equal values");
public String getAttribute()
return this.attribute;
public static void main(String[] args) {
...and another...
public class SampleClassUser {
public static void main(String[] args) {
SampleClass sc1 = new SampleClass();
String test = "test";
sc1.setAttribute(new String(test));
if (sc1.getAttribute() == test)
System.out.println("SampleClassUser MAIN : same object");
if (sc1.getAttribute().equals(test))
System.out.println("SampleClassUser MAIN : equal values");
SampleClass sc2 = new SampleClass(sc1);
sc1.setAttribute("test");
if (sc2.getAttribute() == sc1.getAttribute())
System.out.println("sc1 and sc2 : same object");
if (sc2.getAttribute().equals(sc1.getAttribute()))
System.out.println("sc1 and sc2 : equal values");
}the second class uses the first class. running the second class outputs the following...
INSIDE SETTER : same object
INSIDE SETTER : equal values
SampleClassUser MAIN : equal values
INSIDE SETTER : same object
INSIDE SETTER : equal values
INSIDE CONSTRUCTOR : same object
INSIDE CONSTRUCTOR : equal values
INSIDE SETTER : same object
INSIDE SETTER : equal values
sc1 and sc2 : equal values
...i'm just curios why the last 3 lines are the way they are.
INSIDE SETTER : same object
INSIDE SETTER : equal values
sc1 and sc2 : equal values
how come while inside the setter method, the objects are the same object, and after leaving the setter method are not the same objects?
Can anyone point a good book that shows in detail how objects, primitives and collections are referenced, especially when passed to methods. Online reference is preferred since the availability of books can be a problem for me.
Thanks very muchYou are confusing references with objects.
This compares two object references:
if( obj1 == obj2 ) { // ...Whereas this compares two objects:
if( obj1.equals(obj2) ) { // ...A reference is a special value which indicates where in memory two objects happen to be. If you create two strings with the same value they won't be in the same place in memory:
String s1 = new String("MATCHING");
String s2 = new String("MATCHING");
System.out.println( s1 == s2 ); // false.But they do match:
System.out.println( s1.equals(s2) ); // trueIf you're using a primitive then you're comparing the value that you're interested in. E.g.
int x = 42;
int y = 42;
System.out.println(x == y); // trueBut if you're comparing references you're usually more interested in the objects that they represent that the references themselves.
Does that clarify matters?
Dave.
Maybe you are looking for
-
I can't isnstall Camera Raw on my computer.
-
How can I contact apple to find out what I have to do for them to allow me to downgrade as when I go into iCloud click storage then click 5Gb the done tab will not highlight allowing me to downgrade. Very frustrated!
-
SAP CUP - Error Submitting Request
Hi Experts At my client , i am trying to implement GRC with CUP and RAR . Idea is to setup CUP where requests should be submitted to RAR for risk analysis automatically and if No risks then there is no need of any approval steps . If there are any vi
-
Hello! I will buy one of twice mobile phones and I need help to decide what choice... Both at cost 0€. n97mini is smaller but i readed that the battery life is very short and I will not stay all day charging the mobile. Please help me!! I am looking
-
Hello, I need to know how to get the referral url when a page is loaded. For example, if someone comes from http://www.google.com/search?q=jsp+referral+url&hl=en&lr=&ie=UTF-8&start=80&sa=N, I would like this to appear in the server log file. I've use