Transaction code to find return code for transport request
Hi,
I want to see the return code for transport requests after importing to QAS from DEV. What is the transaction code to find return code and can you explain in brief.
Thx,
Vasu
you can check it out in STMS
wht you can do is ,,
Run Tcode STMS > Overview imports (F5) > you will find all import queues > then click on the import queue in which u want to see the status of transport (DEV , QAS , PRD )
> then find out the transport no > click on that > then click on logs or press ( ctrl + f4)
Return code
Meaning
0000
Transport performed without errors
0004
Warnings were issued. All objects were transported successfully. There were special actions for individual objects that may not have been intentional, for example, a warning is issued during the export if the request contains an object deletion.
Read the warnings.
0008
Individual objects could not be transported successfully. You must analyze and correct the errors. Examples of import errors: Original object was not overwritten, Repaired object was not overwritten
0012 or higher
A critical error has occurred, probably not caused by the contents of the request. You must inform your system administrator.
http://help.sap.com/saphelp_nw70/helpdata/en/57/38e26c4eb711d182bf0000e829fbfe/content.htm
Hope this information will help you ,,
Cheers
dEE
Similar Messages
-
Find Import user for transports
Hi,
We need to write a report which will run on production and find the import user certain transports.
I know how to obtain the user who released the transport (in E070), and
I am aware that the transport history in transaction STMS shows the actual import user, but I have not been able to find the table/function module that will return this information to be used in my program.
Does anyone know how to obtain the import user for a transport?
Regards,
EugeneHello Eugene
The function module which is behind the <i>Transport History</i> button is:
- TMS_TM_GET_HISTORY
Call this function module using the following parameters:
IV_SYSTEM = <sysid> " e.g. E01
IV_DOMAIN = DOMAIN_<sysid> " e.g. DOMAIN_E01
and set values for CV_START_DATE and CV_END_DATE. I believe the functions of the other IMPORTING parameters are quite obvious.
In addition to this function module have a look at threads:
Table Name for Transport Requests & Program name
There you will find another interesting function module (<b>TR_READ_GLOBAL_INFO_OF_REQUEST</b>) described.
Regards
Uwe -
Communication error CPIC return code 019 SAP return code 728. Delta error
Hello Experts,
Would just like to ask if what we suspect is correct. We have running deltas in process chains occurring every early morning. However, upon checking the delta that should have run today, I found that the delta did not push through. I only found this one dump in SM21 that I think is related to the issue:
MNo.
R49 Communication error, CPIC return code 019, SAP return code 728
R5A > Conversation ID: 61442686
R49 Communication error, CPIC return code 019, SAP return code 728
R64 > CPI-C function: CMSEND(SAP)
R5A > Conversation ID: 61443687
R64 > CPI-C function: CMSEND(SAP)
R49 Communication error, CPIC return code 019, SAP return code 728
R5A > Conversation ID: 61444687
R64 > CPI-C function: CMSEND(SAP)
Now we think that the delta did not push through because we are encountering issues with regards to our SAP R/3 system (the source system) and it is currently inaccessible. Did the delta not push through because of the issues and inaccessibility/uber slow processing of our SAP R/3 server? And is the error specified above illustrating this? Any explanation would help. I have already tried looking for similar issues but cannot find anything. Please help. Thanks!Hi
As far I know, The SAP Gateway carries out CPI-C services within the SAP world, which are based on TCP/IP. These services enable SAP Systems and external programs to communicate with one another.
CPI-C services can be used either in the ABAP program or for the external programs via the interfaces.
As RFC (remote function call) is based on CPI-C, all RFC connections also pass through the SAP Gateway.
Errors When Starting Remote Programs Using Remote Shell
When you use remote shell to start CPIC programs on other hosts, the following conditions apply:
The (gateway) UNIX ID must be available on the other host
The gateway host must be entered in the remote host in the file ".rhosts". This file must be located in the HOME directory of the (gateway) UNIX ID.
The program you want to start must be installed in the HOME directory of the (gateway) UNIX ID on the remote host.
Read more from help
http://help.sap.com/saphelp_nw04s/helpdata/en/99/5f8c0bcb7d4280aa862254cffceada/frameset.htm -
Communication error, CPIC return code 017, SAP return code 236
Hi guys,
Need your advice, my SAP system suddenly appear this messages ( SM21).
Please assist me.
Communication error, CPIC return code 017, SAP return code 236
> CPI-C function: CMINIT(SAP)Hi Uday,
My SAP using ABAP. Version 4.7
All RFC working fine except for the OSS
Error message
Details Page 2 Line 22 System Log: Local Analysis of ALBANIA 1
Time Ty. Nr Cl. User Tcod MNo Text
13:52:36 DIA 01 800 SYSADM R49 Communication error, CPIC return code 017, SAP return code 236
Details
Recording at local and central time........................ 27.03.2009 13:52:36
Task................ 57584 . 01 D1 Dialog work process No. 01
User................ SYSADM
Client.............. 800
Terminal............ 10.0.38.
Session............. 1
Transaction code....
Program name........ SAPMSSY1
Problem class....... K SAP Web AS Problem
Development class... STSK -
Communication error, CPIC return code 002, SAP return code 679
Hi,
Our production system log displayed, large no.of
"Communication error, CPIC return code 002, SAP return code 679". I could not able to find any OSS notes on this.
Please explain with detail steps to resolve this issue or please tell me, If any OSS notes exists/
Thanks in advance
Regards
SrinivasWell, I meant that there are a lot of notes available. Search for "CPIC error".
Also, have you double clicked on the line in the log? That will also give you more information.
Rob -
RFC Communication - error CPIC return code 020, SAP return code 665
Hello,
I have created RFC destination for connecting SCM system from Solution Manager. Both the systems are Unicode.
I am getting the following error --
ERROR service '?' unknown
LOCATION SAP-Gateway on host gva4103 / sapgw00
COMPONENT NI (network interface)
COUNTER 4028
MODULE
LINE
RETURN CODE -3
SUBRC 0
RELEASE 640
TIME Mon Apr 24 11:28:21 2006
VERSION 37
And in SM21, I am getting following description
Communication error, CPIC return code 020, SAP return code 665
Following are the things I have checked..
1. RFC destination user checked, password reset in SM59 and in the target system
2. checked entries in /etc/services - Entry sapgw03 is present.
Please let me know what all things I need to check.
Thanks and Regards,
VaibhavI solved the problem by myself.
The problem was with the entry in services file only.
I was checking the file on Target system, which had the entry. There was no entry in Host system services file. After modifying the file, the connection now works fine.
Thus for RFC connection, entry of the target system gateway MUST be there in /etc/service of Host system.
Regards,
Vaibhav -
Communication error, CPIC return code 017, SAP return code 450
Hi All,
can anyone please tell me more about this error Communication error, CPIC return code 017, SAP return code 450 which is displayed in sm21.
We done post configuration of pi server yesterday, after the configuration we were able to log into Integration Directory and Visual Administator..
But today were are not able to log into both .....while logging into both we are getting authentication error 401.
we checked for users being locked but all users are not locked..even even tried reseting passwords,
also restarted the server but didnt help..
Reward points for helpfull Answers.
Thanks and Regards,
Srikanth.Hi Naidu,
Most common reason encountered for this problem is authorizations on installation. it is important to have both network and local machine admin rights when installing content server software. If you don't, the installation will be successful but you encounter the 401 error. Try reinstalling with correct authorization and you should resolve the issue.
Try regenerating the roles. SU01 -> display each XI user -> open the roles -> double click on the role -> click on the User tab in the role screen then there will be a button for USER COMPARISON do that for all the roles in red.
If that does'nt work out, Take a look at OSS Note 751856 and 796726.
May be your security roles were not adjusted during the upgrade (Note 796726).
if found worth pls do the req
Thanx
Sampath -
Communication error, CPIC return code 017, SAP return code 223
In sm59 its throughing error Communication error, CPIC return code 017, SAP return code 223 for SAPOSS connection.
Return code 223 is Network read error.
Check out SAP Note : 421558, it may help you.
Regards,
Zaheer -
Communication error, CPIC return code 020, SAP return code 456
Hi Gurus,
I am facing this error in my BW system system log. "Communication error, CPIC return code 020, SAP return code 456"
Can anyone please helpp in resolving this issue.
Regards
PeterHi Peter,
there is an pretty old note about a similar error ([CPIC return code 020, SAP return code 223|https://websmp102.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=512272&_NLANG=EN]). It was related to a BEX Patch. May be you should raise a note at the service market place for your issue.
regards
Siggi -
CPIC return code 017, SAP return code 236
We get the following error in our SM21 log production system as
"Communication error, CPIC return code 017, SAP return code 236
> CPI-C function: CMINIT(SAP)"
Please let me know if anybody has ever faced it?Hi
Check these links
[236,,No connection to gateway ???]
[Gateway Connection Failure RC=236]
Also is your Kernel updated?
Regards
Puneeth
Edited by: Puneeth on Jul 10, 2009 3:10 PM -
R49 Communication error, CPIC return code 020, SAP return code 223
SM21,every 15 minutes occurs the following error:
R49 Communication error, CPIC return code 020, SAP return code 223
R5A dialog id :5442063
R64 CPI-C function: CMSEND(SAP)
but the partner system can receive SAP data every 15 minutes.
what does the error mean? and how to solve it ?
thanks ahead.Hi,
The following note 63347 provides more information about the error message.
Regards
Srivatsa.V -
Communication error, CPIC return code 020, SAP return code 223
Hello.
I have system NetWeatver 2004s
Client 101 is a client process integration, UME in ABAP
Sometimes java is restarted...
At that moment in SM21 I can see next log:
16:03:36 RD S2 3 Connection to CPI-C client 016 was closed
16:03:36 RD S7 4 > Partner LU name:
16:03:36 RD S0 R > Host: 10.0.0.53
16:03:36 RD S0 I > Partner TP Name: jlaunch
16:03:36 DIA 007 101 SAPJSF R4 9 Communication error, CPIC return code 020, SAP return code 223
16:03:36 DIA 007 101 SAPJSF R5 A > Conversation ID: 64435936
16:03:36 DIA 007 101 SAPJSF R6 4 > CPI-C function: CMSEND(SAP)
What is this? Why JAVA is restarted ?From dev_jcontrol
[Thr 1] Wed Mar 25 16:03:38 2009
[Thr 1] JControlICheckProcessList: process server0 (pid:9773) died (RUN-FLAG)
[Thr 1] JControlIResetProcess: reset process server0
[Thr 1] JControlICheckProcessList: running flight recorder:
/opt/java1.4/bin/java -classpath ../j2ee/cluster/bootstrap/sap.comtcbloffline_launcherimpl.jar com.sap.engine.offline.OfflineToolStart com.sap.engine.flightrecorder.core.Collector ../j2ee/cluster/bootstrap -node ID47163850 1237887114 -bz /usr/sap/KXD/SYS/global
JControlStartJLaunch: program = /usr/sap/KXD/DVEBMGS04/exe/jlaunch
-> arg[00] = /usr/sap/KXD/DVEBMGS04/exe/jlaunch
-> arg[01] = pf=/usr/sap/KXD/SYS/profile/KXD_DVEBMGS04_pasved
-> arg[02] = -DSAPINFO=KXD_04_server
-> arg[03] = -nodeId=1
-> arg[04] = -file=/usr/sap/KXD/DVEBMGS04/j2ee/cluster/instance.properties
-> arg[05] = -syncSem=186
-> arg[06] = -nodeName=ID47163850
-> arg[07] = -jvmOutFile=/usr/sap/KXD/DVEBMGS04/work/jvm_server0.out
-> arg[08] = -jvmOutMode=append
-> arg[09] = -stdOutFile=/usr/sap/KXD/DVEBMGS04/work/std_server0.out
-> arg[10] = -stdOutMode=append
-> arg[11] = -traceMode=append
-> arg[12] = -locOutFile=/usr/sap/KXD/DVEBMGS04/work/dev_server0
-> arg[13] = -mode=JCONTROL
-> arg[14] = pf=/usr/sap/KXD/SYS/profile/KXD_DVEBMGS04_pasved
-> arg[15] = -DSAPSTART=1
-> arg[16] = -DCONNECT_PORT=49453
-> arg[17] = -DSAPSYSTEM=04
-> arg[18] = -DSAPSYSTEMNAME=KXD
-> arg[19] = -DSAPMYNAME=pasved_KXD_04
-> arg[20] = -DSAPPROFILE=/usr/sap/KXD/SYS/profile/KXD_DVEBMGS04_pasved
-> arg[21] = -DFRFC_FALLBACK=ON
-> arg[22] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = LD_LIBRARY_PATH=/opt/java1.4/jre/lib/IA64W:/opt/java1.4/jre/lib/IA64W/server:/opt/java1.4/jre/../lib/IA64W:/usr/sap/KXD/DVEBMGS04/exe:/usr/sap/KXD/DVEBMGS04/exe::/usr/sap/KXD/DVEBMGS04/exe:/usr/sap/KXD/DVEBMGS04/exe:/usr/sap/KXD/DVEBMGS04/exe:/tmp/sapinst_exe.6709.1224050598:/usr/sap/KXD/SYS/exe/run:/oracle/client/10x_64/instantclient:/usr/lib:/usr/sap/KXD/DVEBMGS04/j2ee/os_libs:/usr/sap/KXD/DVEBMGS04/exe:/usr/sap/KXD/DVEBMGS04/exe:
-> exe path = PATH=/opt/java1.4/bin:/usr/sap/KXD/DVEBMGS04/j2ee/os_libs:/oracle/KXD/102_64/bin:/opt/java1.4/bin:.:/home/kxdadm:/usr/sap/KXD/SYS/exe/run:/usr/bin:/usr/ccs/bin:/usr/contrib/bin:/usr/contrib/Q4/bin:/opt/perl/bin:/opt/ipf/bin:/opt/nettladm/bin:/opt/fcms/bin:/opt/wbem/bin:/opt/wbem/sbin:/opt/sas/bin:/opt/graphics/common/bin:/opt/atok/bin:/usr/bin/X11:/usr/contrib/bin/X11:/opt/sec_mgmt/bastille/bin:/opt/caliper/bin:/opt/resmon/bin:/opt/drd/bin:/opt/dsau/bin:/opt/dsau/sbin:/opt/firefox:/opt/gnome/bin:/usr/contrib/kwdb/bin:/opt/mozilla:/opt/perl_32/bin:/opt/perl_64/bin:/opt/prm/bin:/opt/sfm/bin:/opt/swm/bin:/opt/sec_mgmt/spc/bin:/opt/ssh/bin:/opt/sentinel/bin:/opt/swa/bin:/opt/hpsmh/bin:/opt/thunderbird:/opt/langtools/bin:/opt/gwlm/bin:/opt/ignite/bin:/opt/cfg2html
[Thr 1] Wed Mar 25 16:03:40 2009
[Thr 1] JStartupICreateProcess: fork process (pid 22530)
[Thr 1] JControlICheckProcessList: process server0 started (PID:22530) -
Asking for transport request whie table data updation
Hi All,
I am trying to update a table TCJ04 using transaction OPS6. When ever I am adding a new entry or edit the existing entry and click SAVE, the table is asking for Transport request number.
This table carries a master data and should not be asking for transport request. Rather its access has to be controlled by user authorisation.
Please tell me as to what is the reason of asking for transport request.
regards,
Gaurav.Hi Gourav,
If you go table maintanance generater of the table TCJ04 in SE11, you will find that Standard recording routine radio button is selected. That is the reason you are asked to provide transport request while updating data. -
How do I find from which terminal transport request imported to PRD
Hi Experts,
Let me know how can I find from which terminal transport request imported to PRD
Thank you in advance.
Regards,
RajHi Raj,
Please find the answer for your question in below discussion.
How to find out workstation of a transport request created
I hope it will help you
BR
AKJ -
Asking for transport request while table data updation
Hi All,
I am trying to update a table TCJ04 using transaction OPS6. When ever I am adding a new entry or edit the existing entry and click SAVE, the table is asking for Transport request number.
This table carries a master data and should not be asking for transport request. Rather its access has to be controlled by user authorisation.
Please tell me as to what is the reason of asking for transport request.
regards,
Gaurav.Hi There,
It is asking for the transport request for each new entry in the table since the Delivery class in the attributes is set to C( Customizing table, maintenance only by cust., not SAP import ), If it is set to "A" it will not ask for the transport request..
Try creating a custom table and play around with the Delivery class, A and C, you will come to know the difference.
Let me know if you need further help in this regard.
don't 4get to rward pionts if found helpful.
Thanks-
Maybe you are looking for
-
Hi, I'm trying to develop an application on a Machintosh OSX 10.2.8 machine. I'm having a herrendous time trying to get quicktime to work on it. I've somehow managed t oget 1.3.1 and QTJava.jar to work together but now i need encryption, however that
-
FMS Auto Refresh when Field Changes
I have a client who wants to see the Sales Order # (ORDR.DocNum) in their UDF so it is easily visible from every related document. I am currently auto fillling the sales order number when there is a change in their Customer PO# (ORDR.NumAtCard). Th
-
Clickable Links in Spreadsheet
Hi I have a requirement to display a table which contains links to external page in the first column. This table contains lot of data so to create a URL button on every cell of first column will not be possible. I have tried using spreadsheet compone
-
Jgoodies form layout creates screens that look different
Hi, I am creating GUI screens using FormLayout. These look great on my laptop-15". The minute this goes to a desktop 17" monitor or to a 14" laptop some of the screen content is not displayed. I am forced to use a scroll pane and bring in horizontal
-
Hi All, Recently , we applied the patch on one of our ASM instance , as we hit ORA-04031 on ASM instance. Oracle suggested us to apply the patch and one of my colleague came up with these steps and we successfully applied the patch. I have a few ques