Return HttpsURLConnectionOldImpl from URLConnection.openConnection
I am using a java plug-in that establishes HTTPS URL Connection, and returns com.sun.net.ssl.internal.www.protocol.https.HttpsURLConnectionOldImpl
I used the -DUseSunHttpHandler option at server start up, which will return the sun http handler javax.net.ssl.HttpsURLConnection , but this gives classCastException.
How can I return the OldImplementation instead?
I am using a java plug-in that establishes HTTPS URL Connection, and returns com.sun.net.ssl.internal.www.protocol.https.HttpsURLConnectionOldImpl
I used the -DUseSunHttpHandler option at server start up, which will return the sun http handler javax.net.ssl.HttpsURLConnection , but this gives classCastException.
How can I return the OldImplementation instead?
Similar Messages
-
How to get return value from java and read by other application?
i want to read return value from java and the other application read it.
for example:
public class test_return {
test_return(){
public int check(){
return 1;
public static void main(String args[]){
new test_return().check();
}from that class i make as jar file. How to read the return value (1) by other application?
thx..If your installer is requiring some process it invokes to return a particular value on failure, then the installer is seriously broken. There are a bazillion commands your installer could invoke, and any of them could fail, which in turn could invalidate the entire install process, and any of them could return any value on failure. The only value that's consistent (in my experience) is that zero means success and non-zero means failure, with specific non-zero values being different in different programs.
About the only control you have over the JVM's exit code is that if your main method completes without throwing an exception, the JVM will have an exit code of 0, and if main throws an exception (either explicitly or by not catching one thrown from below), it will be non-zero. I'm not even sure if that's guaranteed, but I would guess that's the case.
EDIT: I'm kind of full of crap here. If you're writing the Java code, you can call System.exit(whatever). But nonetheless, if your installer requires certain exit codes from any app--java or otherwise--you have a problem.
Edited by: jverd on Oct 29, 2009 1:27 AM -
How to get return value from Java runtime.getRuntime.exec?
I'm running shell commands from an Oracle db (11gr2) on aix.
But, I would like to get a return value from a shell comand... like you get with "echo $?"
I use a code like
CREATE OR REPLACE JAVA SOURCE NAMED common."Host" AS
import java.io.*;
public class Host {
public static int executeCommand(String command) {
int retval=0;
try {
String[] finalCommand;
finalCommand = new String[3];
finalCommand[0] = "/bin/sh";
finalCommand[1] = "-c";
finalCommand[2] = command;
final Process pr = Runtime.getRuntime().exec(finalCommand);
pr.waitFor();
catch (Exception ex) {
System.out.println(ex.getLocalizedMessage());
retval=-1;
return retval;
/but I do not get a return value... because I don't know how to get return value..
Edited by: user9158455 on 22-Sep-2010 07:33Hi,
Have your tried pr.exitValue() ?
I think you also need a finally block that destroys the subprocess
Regards
Peter -
How to get the return values from a web page
Hi all :
how to get the return values from a web page ? I mean how pass values betwen webflow and web page ?
thank you very much
Edited by: jingying Sony on Apr 15, 2010 6:15 AM
Edited by: jingying Sony on Apr 15, 2010 6:18 AMHi,
What kind of web page do you have? Do you have possibility to for example make RFCs? Then you could trigger events (with parameters that could "return" the values) and the workflow could react to those events. For example your task can have terminating events.
Regards,
Karri -
Remote Object - not able to get the returned value from java method
Hi ,
I am developing one sample flex aplication that connects to the java code and displays the returned value from the
java method in flex client. Here I am able to invoke the java method but not able to collect the returned value.
lastResult is giving null . I am able to see the sysout messages in server console.
I am using flex 3.2 and blazeds server and java 1.5
Here is the code what I have written.
<?xml version="1.0" encoding="utf-8"?><mx:WindowedApplication xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" backgroundColor="#FFFFFF" initialize="initApp()">
<mx:Script><![CDATA[
import mx.controls.Alert;
import mx.binding.utils.ChangeWatcher;
import mx.rpc.events.ResultEvent;
import mx.messaging.*;
import mx.messaging.channels.*
public function initApp():void {
var cs:ChannelSet = new ChannelSet();
var customChannel:Channel = new AMFChannel("my-amf", "http://localhost:8400/blazeds/messagebroker/amf"); cs.addChannel(customChannel);
remoteObj.channelSet = cs;
public function writeToConsole():void { remoteObj.writeToConsole(
"hello from Flash client");
var returnedVal:String = remoteObj.setName().lastResult; Alert.show(returnedVal);
//[Bindable]
// private var returnedVal:String;
]]>
</mx:Script>
<mx:RemoteObject id="remoteObj" destination="sro" />
<mx:Form width="437" height="281">
<mx:FormItem>
</mx:FormItem>
<mx:Button label="Write To Server Console" click="writeToConsole()"/>
</mx:Form>
</mx:WindowedApplication>
Java code
public
public SimpleRemoteObject(){
super(); }
class SimpleRemoteObject {
public void writeToConsole(String msg) { System.out.println("SimpleRemoteObject.write: " + msg); }
public String setName(){ System.
out.println("Name changed in Java");
return "Name changed in Java";
And I have configured destination in remote-config.xml
<destination id="sro">
<properties>
<source>SimpleRemoteObject</source>
<scope>application</scope>
</properties>
</destination>
Please help me .You are not able to get the returned value because if you see the Remote object help you will realise you have to use result="resultfn()" and fault = "faultfn()"
In this you define what you wish to do.
More importantly in the remote object you need to define which method you wish to call using the method class like this
<mx:RemoteObject id="remoteObj" destination="sro" result="r1" fault="f1" >
<Method name="javaMethodName" result="r2" fault="f2"/>
<mx:RemoteObject>
r2 is the function where you get the result back from java and can use it to send the alert. -
Help with returning query from loadURL()
I finally came across loadURL() and figured out that I can
use it to invoke my ColdFusion components without page
reloading--very handy!
Now, I need to figure out how to do this to return values
from my components. Has anyone done this and have an example I
could see, or at least point out to me a suggestion of code for
successfully doing this?
Right now, my component looks like this:
<cfcomponent output="no">
<cffunction name="getComments" access="remote"
output="no" returntype="query">
<cfset var rsComments = "">
<cfquery name="rsComments" datasource="xmlTest">
SELECT *
FROM comments
ORDER BY commenter DESC
</cfquery>
<cfreturn rsComments>
</cffunction>
</cfcomponent>
I am trying to use loadURL() as follows:
function myQuery() {
var myDatasetURL = 'xmlTest.cfc?method=getComments';
var req = Spry.Utils.loadURL("GET", myDatasetURL, true);
In Firebug, the "Response" shows a serialized WDDX packet.
I've not really messed with these before, so any help would be
greatly appreciated!
Thanks
JoelYour first mistake was to choose an array. An array has a fixed length, so it's not appropriate for storing a sequence whose length you don't know in advance. You should choose a List instead; an ArrayList would be a reasonable implementation to choose.
Then you just add the Point to the ArrayList. Here's how you declare it:
List<Point> points = new ArrayList<Point>();and here's how you use it in the listener:
points.add(evt.getPoint());Returning anything from the listener to its caller, which is something buried in the GUI hierarchy, would be... um... pointless. -
How to get return values from stored procedure to ssis packge?
Hi,
I need returnn values from my stored procedure to ssis package -
My procedure look like and ssis package .Kindly help me to oget returnn value to my ssis package
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: <Author,,Name>
-- Create date: <Create Date,,>
-- Description: <Description,,>
-- =============================================
ALTER PROCEDURE [TSC]
-- Add the parameters for the stored procedure here
@P_STAGE VARCHAR(2000)
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Insert statements for procedure here
--SELECT <@Param1, sysname, @p1>, <@Param2, sysname, @p2>
truncate table [INPUTS];
INSERT
INTO
[INPUTS_BASE]
SELECT
[COLUMN]
FROM [INPUTS];
RETURN
END
and i am trying to get the return value from execute sql task and shown below
and i am taking my returnn value to result set variableYou need to have either OUTPUT parameters or use RETURN statement to return a value in stored procedures. RETURN can only return integer values whereas OUTPUT parameters can be of any type
First modify your procedure to define return value or OUTPUT parameter based on requirement
for details see
http://www.sqlteam.com/article/stored-procedures-returning-data
Once that is done in SSIS call sp from Execute SQL Task and in parameter mapping tabe shown above add required parameters and map them to variables created in SSIS and select Direction as Output or Return Value based on what option you used in your
procedure.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Return data from all columns apart from a certain data type.
Bit stuck on something, hope somebody here can help:
I want to do a 'select * from ' a table, to return all columns except ones of a certain datatype. ie. I want to return data from all columns, excluding columns of datatype 'SDO_GEOMETRY'.
This gives me the list of columns:
SELECT COLUMN_NAME
FROM USER_TAB_COLUMNS
WHERE TABLE_NAME = 'ORDER_ITEM'
AND DATA_TYPE <> 'SDO_GEOMETRY'; But I can't seem to take it any further...
Now if I knew the columns beforehand, then of course I could just list them, excluding the geometry column, but this is to be used for a plug-in for MS Word, where a user can pick database columns to dynamically fill a report from - but I don't want the geometry columns as these can't be handled in this way.Hi Reggie,
> connects to the database and presents a list of tables
My guess is that this macro is written so it selects from all_tab_cols.
Change that plugin and let it select from a view like the one above. That way, the users won't be able to see/pick anything that you are not able/willing to present for them.
Edit:
You could even tease your users, and let them see the columns, but not being able to pick them.
create or replace view available_tab_columns
as
select decode(pickable.data_type, null, 0, 1) pickable
,atc.* -- narrow down yourself
from all_tab_cols atc -- or maybe user_tab_cols
,(select 'CHAR' data_type from dual union all
select 'DATE' from dual union all
select 'NUMBER' from dual
-- complete positive list, yourself
) pickable
where atc.data_type = pickable.data_type(+);Regards
Peter
Message was edited by:
Peter Gjelstrup -
Report 2 returning data from previously ran report 1 - Plus/Viewer
Hello,
We have an issue running through discoverer viewer and plus.
If you run the first report with a parameter for the year with this returns the correct data. However if you run report after the first with year 09-10, the 08-09 data is returned again from the previous report
It doesn't matter which order you run them i.e. if you run the 09-10 first and then the 08-09 the 09-10 data is returned.
The reports work fine when run in Discoverer Desktop.
When 2nd report is run after first it returns the data that appears in the first. This Does not happen on Disco Desktop. The SQL from the reports also runs correctly in TOAD.
Metalink notes suggest turning of the Webcache but this is not turned on in either apps tiers
I have also recreated both reports and this has not made a difference either.
Regards
RachaelHi,
Even with webcache turned off Discoverer holds the results of the last run from plus/viewer in the application server and will return these results unless an explicit refresh is entered. Normally, if different parameters are entered this is recognised and the report is re-run. I don't know how you are running your report but for some reason it is not recognising the new parameters and returning the last result set. A refresh should return the correct results.
Rod West -
Getting Return values from RFC function call with visual basic
Hi,
I am creating a sample app to connect to a SAP system which call its RFC functions created with ABAP. It was known that the function will return more than 1 return values.
SAP Function name ==> "ZFMTP_RFC_GET_RESULT"
Export parameters (to SAP):
- Student Name [char 10] ==> "STUNAME"
- Student ID [char 20] ==> "STUID"
Return values (From SAP):
- Results [char 10] ==> "RESULT"
- Remarks [char 200] ==> "REMARKS"
i have managed to get sample codes for connecting and call a RFC function with vb but they only get a return value. How do i retrieve multiple return values like the above function "RESULT" and "REMARKS"?
Here's my vb code to accessing the function
Dim R3 As Object
Dim FBFunc As Object
Dim returnFunc As Boolean
Dim connected As Boolean
R3 = CreateObject("SAP.Functions")
R3.Connection.Client = "000"
R3.Connection.User = "BCUSER"
R3.Connection.Password = "minisap"
R3.Connection.Language = "DE"
R3.Connection.System = "dtsystem"
R3.Connection.Applicationserver = "xxx.xxx.xxx.xxx"
connected = R3.Connection.Logon(0, True)
If connected <> True Then
MsgBox("Unable to connect to SAP")
End If
FBFunc = R3.add("ZFMTP_RFC_GET_RESULT")
FBFunc.exports("STUNAME") = "Jonny"
FBFunc.exports("STUID") = "12345"
returnFunc = FBFunc.Call() <<== How do i get the return value? or RESULT and REMARKS of the RFC Function?
thanks alot.
Edited by: Eugene Tan on Mar 4, 2008 7:17 AMHi Gregor,
Thanks for the link....i am having some doubts with the codes, hope you can clarify them for me if you know the codes..
Below is the code snippet.
Set impReturn = CHPASS_FN.Imports("RETURN") <<=== is RETURN the standard keyword to get a return object?
expPassword.Value = currpass
expNewPass.Value = newpass
expFillRet.Value = "1"
''' Call change password function
If CHPASS_FN.Call = True Then
outFile.Write (", Called Function")
Message = impReturn("MESSAGE") <<==== So if i have 3 return values..i just replace with the return value variable names?
outFile.WriteLine " : " & Message
Else
outFile.Write (", Call to function failed")
End If
thanks alot...all your help is very appreciated. -
The ways to return data from a stored procedure.
Hi, I know there are three ways to pass out a value from a Microsoft SQL stored procedure, but I have no clear idea what Oracle SP can do, I know Oracle doesn't support multi-recordset(v8), can not return a recordset by a inner select query, but I do know there is a cursor object, which doesn't like its counterpart in Microsoft SQL server, is a choice under most situation. Here I wonder anyone who is good at Oracle can give a list of all ways to return data from a SP, including example is more better, thanks.
Here is a way to get return a record from a function and a procedure. You need to be familiar with Oracle packages as well as stored procedures and functions:
CREATE OR REPLACE PACKAGE EmpPkg AS
cursor cEmp(pEmpno in number) is
select empno, ename, job, hiredate, sal
from emp
where empno = pEmpno;
FUNCTION GetEmployee(pnEmpNo in number) RETURN cEmp%rowtype;
PROCEDURE GetEmployee(pnEmpNo in number, prEmp out cEmp%rowtype);
END;
CREATE OR REPLACE PACKAGE BODY EmpPkg AS
FUNCTION GetEmployee(pnEmpNo in number) RETURN cEmp%rowtype IS
rEmp cEmp%rowtype;
BEGIN
open cEmp(pnEmpNo);
fetch cEmp into rEmp;
close cEmp;
return rEmp;
END;
PROCEDURE GetEmployee(pnEmpNo in number, prEmp out cEmp%rowtype) IS
BEGIN
open cEmp(pnEmpNo);
fetch cEmp into prEmp;
close cEmp;
END;
END;
Here's how you use the package:
DECLARE
rEmp EmpPkg.cEmp%rowtype;
BEGIN
rEmp := EmpPkg.GetEmployee(7782);
dbms_output.put_line(rEmp.ename);
EmpPkg.GetEmployee(7902, rEmp);
dbms_output.put_line(rEmp.ename);
END;
Note that you can return any Oracle data type from a function. Likewise, you can specify any Oracle data type as an out parameter in a procedure. Also, you can make a parameter both an in and an out datatype like this:
PROCEDURE GetEmployee(pnEmpNo in out number);
I hope this puts you in the right direction.
null -
Serial number copy functionality when creating return orders from standards
Hi all,
Serial number is not copying when i create return order from the standard orders in below scenario.
I implemented one BADI for copying Serial number to Sales order when doing Post goods receipt.
So after doing inbound delivery and PGR, serial number is copied to the sales order but when i create return order with reference to the Standard order Serial number is not copying.
When i go VA02 for standard order and selecting the technical objects then if i create the return order serial number is copying.
Please help me in the above issue.
I used the following logic to copy serial number from inbound delivery PGR.
UPDATING THE SERIAL NUMBER TO THE RESPECTINVE SALES ORDER LINE ITEMS
CALL FUNCTION 'SERNR_ADD_TO_AU'
EXPORTING
sernr = lwa_sernr-sernr
profile = 'NEOP'
material = lwa_mseg-matnr
quantity = 1
document = lwa_mseg-kdauf
item = lwa_mseg-kdpos
debitor = lwa_mseg-kunnr
vbtyp = 'C'
sd_auart = lv_auart
sd_postyp = lv_pstyv
EXCEPTIONS
konfigurations_error = 1
serialnumber_errors = 2
serialnumber_warnings = 3
OTHERS = 4.
IF sy-subrc = 0.
CALL FUNCTION 'SERIAL_LISTE_POST_AU'.
IF sy-subrc EQ 0.
COMMIT WORK.
WAIT UP TO 2 SECONDS.
ENDIF.
Edited by: Rajesh Sanapala on Feb 16, 2009 12:48 PMhi.
I have the same problem.
Can you please share how you solved it?
thank you
Bill -
Returns item from purchase order in SRM
Hi,
Is it possible to return item from a purchase order in SRM?
meaning : to return goods to an external vendor.
in ECC i know its possible. but i want to know if its possible in SRM.
if yes, how?
(i dont want to return by confirmation)
we are using SRM550.
regards,
vered
Edited by: Vered Madar on Aug 2, 2010 1:28 PMHi,
In SRM POs, GR based invoice indicator for Goods item is ticked based on the Vendor Master. If the vendor master has the tick, then PO will have the tick for GR based invoice. However for a service PO/limit PO, GR based invoice comes as default in PO and cannot be undone.
Regards,
Sanjeev -
How to make a "return delivery" from a goods mvnt linked to a reservation
Hi, I want to realize a "return delivery" from a goods mvnt that is linked to a reservation number.
I'm using FM BAPI_GOODSMVT_CREATE.
I'm able to create a goods mvnt, but this doesn't updates the quantity in the reservation document.
For example:
There are 10 units of a material reserved in a reservation document.
I create a goods mov. linked to the reservation number by populating the field RESERV_NO and RES_ITEM in the GOODSMVT_ITEM parameter. In this document I fullfilled the TARGET_QTY field with 10. This the positive movement.
After that, reservation document says that there are no units pending to serve. (10 reserved - 10 served = 0 pending).
Now, I want to return 2 units of this material. I fullfilled the fields REF_DOC_YR, REF_DOC and REF_DOC_IT with keys (doc/item/year) of the first goods movement, and MOVE_TYPE with the reversal movement number. But this doesn't updates the quantity in the reservation document.
I tried fullfiling RESERV_NO and RES_ITEM, but this generates a positive movement, not the reversal!
Is there any other process that updates quantity in the reservation document?
Could anybody help me?1) Create a button on the chapter menu with the text MAIN MENU (or whatever you want it to say).
2) Select the chapter menu in either the graphical or outline view of your DVD.
3) Click on the Connections tab.
4) Select the MAIN MENU button in the source column.
5) Select the main menu in the Targets column.
6) Click the Connect button above the Targets column.
After doing the above steps you should see the main menu in the Target column to the right of "MAIN MENU:Jump when activated" in the source column. Your MAIN MENU button will now take you back to the main menu.
Message was edited by: John Link -
I can't connect my ipad to PC. iTunes doesn't recognise it. In turn I receive an error that this connection can't be established as a returning fault from ipad. why that happens??
The returning message is: "iTunes could not connect to the iPad because an invalid response was received from the device''
Maybe you are looking for
-
Issue with a method call in a TaskFlow (works 2 times instead of 1)
Hi guys, i'm using jdev11.1.1.1.2.0 and the integrated weblo or remote weblo 10.3.2.0. I'm encountering a problem with a method call which is invoked inside a Task Flow. Let me tell us the details of : I'm invoking a method call which is part of a Ta
-
How to check the report builder version from the rdf file
Hi, I have a rdf file but I don't the developer using which version of report builder to develop the rdf file. So, does anyone knows how to check the rdf file is developed by which version of report builder? When I try to use the notepad to open the
-
Chat video quality...
Has anyone been able to video chat with two or three people and maintain a decent video quality? When I try to video chat with two people the quality drops considerably, and I'm wondering if it's a bandwidth problem, or if it's just the way it is. I'
-
Hi, I got 2 classes, one is creating an object referring to the other, however, it doesn't seem to work... I got this: Screen s = new Screen();Which should call public void Screen() in a class named Screen, right? Well... it doesn't... This is the Sc
-
How to undelete an email?
I accidentally deleted an email tonight as I was reading it (hands are so cold they were shaking!). However, when I delete an email it never goes to the Trash folder so there is nothing to undelete. The email account is my Gmail account using Exchang