Return PR creation using QM02

Hi All
I am creating return PR from t-code QM02.I am updating the return pr number into custom field in QMEL table.I am able to create a return PR and i am to update in QMEL table.Once i come back to QM02 initial scree(where we enter Quality notification number).Return PR number of corresponding notification number is getting deleted from database table.even tough i used commit work .
Thanks
Vamsi

Closed.
The problem is that when we pass it from program the conversion rule is to be applied.

Similar Messages

Error in : Purchase order Creation using BAPI_PO_CREATE1

Hell guys,
I am trying to create a PO using a BAPI - BAPI_PO_CREATE1
I want the new PO to have all the characteristics of an existing PO. whose PO # is stored in wa_order_split_create-docnr and for the new PO, i want the quantity from wa_order_split_create-qty_acptd and the delivery data to be wa_order_split_create-dly_date. But this process and code below gives a short dump in the std FM - MEPO_DOC_ITEM_GET . It raises an exception of failure. I am trying to create many new PO's in the loop below. If there is just one row, sometimes, it creates the PO even with the exception failure ( which is pretty weird).
Am i making any mistake while filling the header or item or schedule lines for the BAPI_PO_CREATE1 ? Any tips or clues why I am getting a dump ?
DATA: i_insert,
 i_create_order,
 i_cycle TYPE cycle,
 i_qty_acpt TYPE dzmeng,
 i_dly_date TYPE vbak-vdatu,
 i_item TYPE roijnomiio .
DATA: i_order TYPE symsgv,
 i_return TYPE swd_return .
DATA: i_vbak TYPE vbak,
 i_vbap TYPE vbap,
 i_ekko TYPE ekko,
 i_ekpo TYPE ekpo,
 i_bsoh TYPE bapisdhd1,
 i_bsohx TYPE bapisdhd1x,
 i_bpoh TYPE bapimepoheader,
 i_bpohx TYPE bapimepoheaderx,
 i_vbeln TYPE vbeln_va,
 i_posnr TYPE posnr_va,
 i_contr TYPE vbeln_va,
 i_conit TYPE posnr_va,
 i_ebeln TYPE ebeln,
 i_ebelp TYPE ebelp,
 i_pargr TYPE pargr,
 i_thead TYPE thead,
 i_line TYPE tline,
 i_note TYPE txw_note,
 i_new_vbeln TYPE vbeln_va,
 i_new_ebeln TYPE ebeln,
 i_wa_bsoi TYPE bapisditm,
 i_wa_bsoix TYPE bapisditmx,
 i_wa_bsop TYPE bapiparnr,
 i_wa_bsos TYPE bapischdl,
 i_wa_bsosx TYPE bapischdlx,
 i_wa_vbpa TYPE vbpa,
 i_wa_vbkd TYPE vbkd,
 i_wa_bpoi TYPE bapimepoitem,
 i_wa_bpoix TYPE bapimepoitemx,
 i_wa_bpos TYPE bapimeposchedule,
 i_wa_bposx TYPE bapimeposchedulx,
 i_wa_bpop TYPE bapiekkop,
 i_wa_ekpa TYPE ekpa,
 i_message TYPE char72,
 i_bapiretn TYPE bapiret2,
 i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
 i_vbpa TYPE TABLE OF vbpa INITIAL SIZE 1,
 i_vbkd TYPE TABLE OF vbkd INITIAL SIZE 1,
 i_ekpa TYPE TABLE OF ekpa INITIAL SIZE 1,
 i_bsoi TYPE TABLE OF bapisditm INITIAL SIZE 1,
 i_bsoix TYPE TABLE OF bapisditmx INITIAL SIZE 1,
 i_bsos TYPE TABLE OF bapischdl INITIAL SIZE 1,
 i_bsosx TYPE TABLE OF bapischdlx INITIAL SIZE 1,
 i_bsop TYPE TABLE OF bapiparnr INITIAL SIZE 1,
 i_bpoi TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
 i_bpoix TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
 i_bpos TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
 i_bposx TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
 i_bpop TYPE TABLE OF bapiekkop INITIAL SIZE 1,
 i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
 i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
 i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
 i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
 c_char_e VALUE 'E',
 c_char_p VALUE 'P',
 c_char_g VALUE 'G',
 c_char_i VALUE 'I',
 c_char_s VALUE 'S',
 c_char_x VALUE 'X',
 c_zsw(3) VALUE 'ZSW',
 c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
 IF NOT i_create_order IS INITIAL .
 CLEAR: i_create_order .
 MOVE: wa_order_split_create-docnr TO i_ebeln,
 wa_order_split_create-docitm TO i_ebelp .
 CALL FUNCTION 'ME_EKKO_SINGLE_READ'
 EXPORTING
 pi_ebeln = i_ebeln
 IMPORTING
 po_ekko = i_ekko
 EXCEPTIONS
 no_records_found = 1
 OTHERS = 2.
 IF sy-subrc <> 0 .
 ENDIF .
* Fill PO Header
 i_bpoh-comp_code = i_ekko-bukrs .
 i_bpoh-doc_type = i_ekko-bsart .
 i_bpoh-vendor = i_ekko-lifnr .
 i_bpoh-langu = i_ekko-spras .
 i_bpoh-pmnttrms = i_ekko-zterm .
 i_bpoh-purch_org = i_ekko-ekorg .
 i_bpoh-pur_group = i_ekko-ekgrp .
 i_bpoh-currency = i_ekko-waers .
 i_bpoh-agreement = i_ekko-konnr .
 i_bpoh-incoterms1 = i_ekko-inco1 .
 i_bpoh-incoterms2 = i_ekko-inco2 .
* Fill PO update indicator 'X'
 i_bpohx-comp_code = c_char_x .
 i_bpohx-doc_type = c_char_x .
 i_bpohx-vendor = c_char_x .
 i_bpohx-langu = c_char_x .
 i_bpohx-pmnttrms = c_char_x .
 i_bpohx-purch_org = c_char_x .
 i_bpohx-pur_group = c_char_x .
 i_bpohx-currency = c_char_x .
 i_bpohx-agreement = c_char_x .
 i_bpohx-incoterms1 = c_char_x .
 i_bpohx-incoterms2 = c_char_x .
 CALL FUNCTION 'ME_EKPO_SINGLE_READ'
 EXPORTING
 pi_ebeln = i_ebeln
 pi_ebelp = i_ebelp
 IMPORTING
 po_ekpo = i_ekpo
 EXCEPTIONS
 no_records_found = 1
 OTHERS = 2.
 IF sy-subrc <> 0 .
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF .
* Fill PO Item
 i_wa_bpoi-po_item = i_ekpo-ebelp .
 i_wa_bpoi-material = i_ekpo-matnr .
 i_wa_bpoi-plant = i_ekpo-werks .
 i_wa_bpoi-stge_loc = i_ekpo-lgort .
 i_wa_bpoi-quantity = wa_order_split_create-qty_acptd .
 i_wa_bpoi-po_unit = i_ekpo-meins .
 i_wa_bpoi-tax_code = i_ekpo-mwskz .
 i_wa_bpoi-val_type = i_ekpo-bwtar .
 i_wa_bpoi-item_cat = i_ekpo-pstyp .
 i_wa_bpoi-acctasscat = i_ekpo-knttp .
 i_wa_bpoi-agreement = i_ekpo-konnr .
 i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
 APPEND i_wa_bpoi TO i_bpoi .
* Fill PO Item update indicator 'X'
 i_wa_bpoix-po_item = i_ekpo-ebelp .
 i_wa_bpoix-po_itemx = c_char_x .
 i_wa_bpoix-material = c_char_x .
 i_wa_bpoix-plant = c_char_x .
 i_wa_bpoix-stge_loc = c_char_x .
 i_wa_bpoix-quantity = c_char_x .
 i_wa_bpoix-po_unit = c_char_x .
 i_wa_bpoix-tax_code = c_char_x .
 i_wa_bpoix-val_type = c_char_x .
 i_wa_bpoix-item_cat = c_char_x .
 i_wa_bpoix-acctasscat = c_char_x .
 i_wa_bpoix-agreement = c_char_x .
 i_wa_bpoix-agmt_item = c_char_x .
 APPEND i_wa_bpoix TO i_bpoix .
* Fill PO Item Schedule
 i_wa_bpos-po_item = i_ekpo-ebelp .
 i_wa_bpos-sched_line = '0001' .
 i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
 i_wa_bpos-quantity = wa_order_split_create-qty_acptd .
 APPEND i_wa_bpos TO i_bpos .
* Fill PO Item schedule update indicator 'X'
 i_wa_bposx-po_item = i_ekpo-ebelp .
 i_wa_bposx-sched_line = '0001' .
 i_wa_bposx-delivery_date = c_char_x .
 i_wa_bposx-quantity = c_char_x .
 APPEND i_wa_bposx TO i_bposx .
 CLEAR: i_pargr .
 SELECT SINGLE pargr
 INTO i_pargr
 FROM t161
 WHERE bstyp = i_ekko-bstyp
 AND bsart = i_ekko-bsart .
 CLEAR i_ekpa[].
 CALL FUNCTION 'MM_READ_PARTNERS'
 EXPORTING
 application = c_char_p
 ebeln = i_ebeln
 bstyp = i_ekko-bstyp
 pargr = i_pargr
 TABLES
 x_ekpa = i_ekpa[].
 LOOP AT i_ekpa INTO i_wa_ekpa .
 i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
 i_wa_bpop-langu = sy-langu .
 IF NOT i_wa_ekpa-lifn2 IS INITIAL .
 i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
 ELSE .
 i_wa_bpop-buspartno = i_wa_ekpa-parnr .
 ENDIF .
 APPEND i_wa_bpop TO i_bpop .
 CLEAR: i_wa_ekpa, i_wa_bpop .
 ENDLOOP .
 CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
 CALL FUNCTION 'BAPI_PO_CREATE1'
 EXPORTING
 poheader = i_bpoh
 poheaderx = i_bpohx
 IMPORTING
 exppurchaseorder = i_new_ebeln
 TABLES
 return = i_bapiret2
 poitem = i_bpoi[]
 poitemx = i_bpoix[]
 poschedule = i_bpos[]
 poschedulex = i_bposx[].
 i_order = i_new_ebeln .
 SHIFT i_order LEFT DELETING LEADING '0' .
 i_return-errortype = c_char_i .
 i_return-workarea = c_zsw .
 i_return-message = '064' .
 i_return-variable1 = i_order .
 loop at i_bapiret2 into i_bapiretn where type ca 'EAX' .
 append i_bapiretn to t_bapi_return .
 endloop .
 if t_bapi_return[] is initial .
 i_create_order = c_char_x .
 CALL FUNCTION 'SWD_POPUP_MESSAGE_SEND'
 EXPORTING
 act_return = i_return. "Popup with new PO no.
 ENDCASE . " Docind
 ENDIF .
ENDLOOP.

Hi Shareen,
I think in the following parts of the code,
 CALL FUNCTION 'MM_READ_PARTNERS'
 EXPORTING
 application = c_char_p
 ebeln = i_ebeln
 bstyp = i_ekko-bstyp
 pargr = i_pargr
 TABLES
 x_ekpa = i_ekpa[].
Error in : Purchase order Creation using BAPI_PO_CREATE1
Posted: Mar 20, 2006 7:39 PM Reply E-mail this post
Hell guys,
I am trying to create a PO using a BAPI - BAPI_PO_CREATE1
I want the new PO to have all the characteristics of an existing PO. whose PO # is stored in wa_order_split_create-docnr and for the new PO, i want the quantity from wa_order_split_create-qty_acptd and the delivery data to be wa_order_split_create-dly_date. But this process and code below gives a short dump in the std FM - MEPO_DOC_ITEM_GET . It raises an exception of failure. I am trying to create many new PO's in the loop below. If there is just one row, sometimes, it creates the PO even with the exception failure ( which is pretty weird).
Am i making any mistake while filling the header or item or schedule lines for the BAPI_PO_CREATE1 ? Any tips or clues why I am getting a dump ?
DATA: i_insert,
 i_create_order,
 i_cycle TYPE cycle,
 i_qty_acpt TYPE dzmeng,
 i_dly_date TYPE vbak-vdatu,
 i_item TYPE roijnomiio .
DATA: i_order TYPE symsgv,
 i_return TYPE swd_return .
DATA: i_vbak TYPE vbak,
 i_vbap TYPE vbap,
 i_ekko TYPE ekko,
 i_ekpo TYPE ekpo,
 i_bsoh TYPE bapisdhd1,
 i_bsohx TYPE bapisdhd1x,
 i_bpoh TYPE bapimepoheader,
 i_bpohx TYPE bapimepoheaderx,
 i_vbeln TYPE vbeln_va,
 i_posnr TYPE posnr_va,
 i_contr TYPE vbeln_va,
 i_conit TYPE posnr_va,
 i_ebeln TYPE ebeln,
 i_ebelp TYPE ebelp,
 i_pargr TYPE pargr,
 i_thead TYPE thead,
 i_line TYPE tline,
 i_note TYPE txw_note,
 i_new_vbeln TYPE vbeln_va,
 i_new_ebeln TYPE ebeln,
 i_wa_bsoi TYPE bapisditm,
 i_wa_bsoix TYPE bapisditmx,
 i_wa_bsop TYPE bapiparnr,
 i_wa_bsos TYPE bapischdl,
 i_wa_bsosx TYPE bapischdlx,
 i_wa_vbpa TYPE vbpa,
 i_wa_vbkd TYPE vbkd,
 i_wa_bpoi TYPE bapimepoitem,
 i_wa_bpoix TYPE bapimepoitemx,
 i_wa_bpos TYPE bapimeposchedule,
 i_wa_bposx TYPE bapimeposchedulx,
 i_wa_bpop TYPE bapiekkop,
 i_wa_ekpa TYPE ekpa,
 i_message TYPE char72,
 i_bapiretn TYPE bapiret2,
 i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
 i_vbpa TYPE TABLE OF vbpa INITIAL SIZE 1,
 i_vbkd TYPE TABLE OF vbkd INITIAL SIZE 1,
 i_ekpa TYPE TABLE OF ekpa INITIAL SIZE 1,
 i_bsoi TYPE TABLE OF bapisditm INITIAL SIZE 1,
 i_bsoix TYPE TABLE OF bapisditmx INITIAL SIZE 1,
 i_bsos TYPE TABLE OF bapischdl INITIAL SIZE 1,
 i_bsosx TYPE TABLE OF bapischdlx INITIAL SIZE 1,
 i_bsop TYPE TABLE OF bapiparnr INITIAL SIZE 1,
 i_bpoi TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
 i_bpoix TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
 i_bpos TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
 i_bposx TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
 i_bpop TYPE TABLE OF bapiekkop INITIAL SIZE 1,
 i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
 i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
 i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
 i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
 c_char_e VALUE 'E',
 c_char_p VALUE 'P',
 c_char_g VALUE 'G',
 c_char_i VALUE 'I',
 c_char_s VALUE 'S',
 c_char_x VALUE 'X',
 c_zsw(3) VALUE 'ZSW',
 c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
 IF NOT i_create_order IS INITIAL .
 CLEAR: i_create_order .
 MOVE: wa_order_split_create-docnr TO i_ebeln,
 wa_order_split_create-docitm TO i_ebelp .
 CALL FUNCTION 'ME_EKKO_SINGLE_READ'
 EXPORTING
 pi_ebeln = i_ebeln
 IMPORTING
 po_ekko = i_ekko
 EXCEPTIONS
 no_records_found = 1
 OTHERS = 2.
 IF sy-subrc <> 0 .
 ENDIF .
Fill PO Header
 i_bpoh-comp_code = i_ekko-bukrs .
 i_bpoh-doc_type = i_ekko-bsart .
 i_bpoh-vendor = i_ekko-lifnr .
 i_bpoh-langu = i_ekko-spras .
 i_bpoh-pmnttrms = i_ekko-zterm .
 i_bpoh-purch_org = i_ekko-ekorg .
 i_bpoh-pur_group = i_ekko-ekgrp .
 i_bpoh-currency = i_ekko-waers .
 i_bpoh-agreement = i_ekko-konnr .
 i_bpoh-incoterms1 = i_ekko-inco1 .
 i_bpoh-incoterms2 = i_ekko-inco2 .
Fill PO update indicator 'X'
 i_bpohx-comp_code = c_char_x .
 i_bpohx-doc_type = c_char_x .
 i_bpohx-vendor = c_char_x .
 i_bpohx-langu = c_char_x .
 i_bpohx-pmnttrms = c_char_x .
 i_bpohx-purch_org = c_char_x .
 i_bpohx-pur_group = c_char_x .
 i_bpohx-currency = c_char_x .
 i_bpohx-agreement = c_char_x .
 i_bpohx-incoterms1 = c_char_x .
 i_bpohx-incoterms2 = c_char_x .
 CALL FUNCTION 'ME_EKPO_SINGLE_READ'
 EXPORTING
 pi_ebeln = i_ebeln
 pi_ebelp = i_ebelp
 IMPORTING
 po_ekpo = i_ekpo
 EXCEPTIONS
 no_records_found = 1
 OTHERS = 2.
 IF sy-subrc <> 0 .
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF .
Fill PO Item
 i_wa_bpoi-po_item = i_ekpo-ebelp .
 i_wa_bpoi-material = i_ekpo-matnr .
 i_wa_bpoi-plant = i_ekpo-werks .
 i_wa_bpoi-stge_loc = i_ekpo-lgort .
 i_wa_bpoi-quantity = wa_order_split_create-qty_acptd .
 i_wa_bpoi-po_unit = i_ekpo-meins .
 i_wa_bpoi-tax_code = i_ekpo-mwskz .
 i_wa_bpoi-val_type = i_ekpo-bwtar .
 i_wa_bpoi-item_cat = i_ekpo-pstyp .
 i_wa_bpoi-acctasscat = i_ekpo-knttp .
 i_wa_bpoi-agreement = i_ekpo-konnr .
 i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
 APPEND i_wa_bpoi TO i_bpoi .
Fill PO Item update indicator 'X'
 i_wa_bpoix-po_item = i_ekpo-ebelp .
 i_wa_bpoix-po_itemx = c_char_x .
 i_wa_bpoix-material = c_char_x .
 i_wa_bpoix-plant = c_char_x .
 i_wa_bpoix-stge_loc = c_char_x .
 i_wa_bpoix-quantity = c_char_x .
 i_wa_bpoix-po_unit = c_char_x .
 i_wa_bpoix-tax_code = c_char_x .
 i_wa_bpoix-val_type = c_char_x .
 i_wa_bpoix-item_cat = c_char_x .
 i_wa_bpoix-acctasscat = c_char_x .
 i_wa_bpoix-agreement = c_char_x .
 i_wa_bpoix-agmt_item = c_char_x .
 APPEND i_wa_bpoix TO i_bpoix .
Fill PO Item Schedule
 i_wa_bpos-po_item = i_ekpo-ebelp .
 i_wa_bpos-sched_line = '0001' .
 i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
 i_wa_bpos-quantity = wa_order_split_create-qty_acptd .
 APPEND i_wa_bpos TO i_bpos .
Fill PO Item schedule update indicator 'X'
 i_wa_bposx-po_item = i_ekpo-ebelp .
 i_wa_bposx-sched_line = '0001' .
 i_wa_bposx-delivery_date = c_char_x .
 i_wa_bposx-quantity = c_char_x .
 APPEND i_wa_bposx TO i_bposx .
 CLEAR: i_pargr .
 SELECT SINGLE pargr
 INTO i_pargr
 FROM t161
 WHERE bstyp = i_ekko-bstyp
 AND bsart = i_ekko-bsart .
 CLEAR i_ekpa[].
 CALL FUNCTION 'MM_READ_PARTNERS'
 EXPORTING
 application = c_char_p
 ebeln = i_ebeln
 bstyp = i_ekko-bstyp
 pargr = i_pargr
 TABLES
 x_ekpa = i_ekpa[].
 LOOP AT i_ekpa INTO i_wa_ekpa .
 i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
 i_wa_bpop-langu = sy-langu .
 IF NOT i_wa_ekpa-lifn2 IS INITIAL .
 i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
 ELSE .
 i_wa_bpop-buspartno = i_wa_ekpa-parnr .
 ENDIF .
 APPEND i_wa_bpop TO i_bpop .
 CLEAR: i_wa_ekpa, i_wa_bpop .
 ENDLOOP .
 CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
 CALL FUNCTION 'BAPI_PO_CREATE1'
 EXPORTING
 poheader = i_bpoh
 poheaderx = i_bpohx
 IMPORTING
 exppurchaseorder = i_new_ebeln
 TABLES
 return = i_bapiret2
 poitem = i_bpoi[]
 poitemx = i_bpoix[]
 poschedule = i_bpos[]
 poschedulex = i_bposx[].
it should be only i_bpoi, i_bpoix, i_bpos, i_bposx but not i_bpoi[], i_bpoix[], i_bpos[], i_bposx[].
CHange the code as follows:
DATA: i_insert,
 i_create_order,
 i_cycle TYPE cycle,
 i_qty_acpt TYPE dzmeng,
 i_dly_date TYPE vbak-vdatu,
 i_item TYPE roijnomiio .
DATA: i_order TYPE symsgv,
 i_return TYPE swd_return .
DATA: i_vbak TYPE vbak,
 i_vbap TYPE vbap,
 i_ekko TYPE ekko,
 i_ekpo TYPE ekpo,
 i_bsoh TYPE bapisdhd1,
 i_bsohx TYPE bapisdhd1x,
 i_bpoh TYPE bapimepoheader,
 i_bpohx TYPE bapimepoheaderx,
 i_vbeln TYPE vbeln_va,
 i_posnr TYPE posnr_va,
 i_contr TYPE vbeln_va,
 i_conit TYPE posnr_va,
 i_ebeln TYPE ebeln,
 i_ebelp TYPE ebelp,
 i_pargr TYPE pargr,
 i_thead TYPE thead,
 i_line TYPE tline,
 i_note TYPE txw_note,
 i_new_vbeln TYPE vbeln_va,
 i_new_ebeln TYPE ebeln,
 i_wa_bsoi TYPE bapisditm,
 i_wa_bsoix TYPE bapisditmx,
 i_wa_bsop TYPE bapiparnr,
 i_wa_bsos TYPE bapischdl,
 i_wa_bsosx TYPE bapischdlx,
 i_wa_vbpa TYPE vbpa,
 i_wa_vbkd TYPE vbkd,
 i_wa_bpoi TYPE bapimepoitem,
 i_wa_bpoix TYPE bapimepoitemx,
 i_wa_bpos TYPE bapimeposchedule,
 i_wa_bposx TYPE bapimeposchedulx,
 i_wa_bpop TYPE bapiekkop,
 i_wa_ekpa TYPE ekpa,
 i_message TYPE char72,
 i_bapiretn TYPE bapiret2,
 i_bapiret2 TYPE TABLE OF bapiret2 INITIAL SIZE 1,
 i_vbpa TYPE TABLE OF vbpa INITIAL SIZE 1,
 i_vbkd TYPE TABLE OF vbkd INITIAL SIZE 1,
 i_ekpa TYPE TABLE OF ekpa INITIAL SIZE 1,
 i_bsoi TYPE TABLE OF bapisditm INITIAL SIZE 1,
 i_bsoix TYPE TABLE OF bapisditmx INITIAL SIZE 1,
 i_bsos TYPE TABLE OF bapischdl INITIAL SIZE 1,
 i_bsosx TYPE TABLE OF bapischdlx INITIAL SIZE 1,
 i_bsop TYPE TABLE OF bapiparnr INITIAL SIZE 1,
 i_bpoi TYPE TABLE OF bapimepoitem INITIAL SIZE 1,
 i_bpoix TYPE TABLE OF bapimepoitemx INITIAL SIZE 1,
 i_bpos TYPE TABLE OF bapimeposchedule INITIAL SIZE 1,
 i_bposx TYPE TABLE OF bapimeposchedulx INITIAL SIZE 1,
 i_bpop TYPE TABLE OF bapiekkop INITIAL SIZE 1,
 i_text_tab TYPE TABLE OF tline INITIAL SIZE 1,
 i_line_tab TYPE TABLE OF tline INITIAL SIZE 1,
 i_txw_note TYPE TABLE OF txw_note INITIAL SIZE 1,
 i_oij_el_doc_mot TYPE oij_el_doc_mot .
CONSTANTS: c_char_c VALUE 'C',
 c_char_e VALUE 'E',
 c_char_p VALUE 'P',
 c_char_g VALUE 'G',
 c_char_i VALUE 'I',
 c_char_s VALUE 'S',
 c_char_x VALUE 'X',
 c_zsw(3) VALUE 'ZSW',
 c_nomit_stat(4) VALUE 'ZDNY' .
DATA : lv_nomtk_split TYPE oij_nomtk.
DATA : i_order_split_create TYPE TABLE OF zsws_order_split.
DATA : wa_order_split_create TYPE zsws_order_split.
LOOP AT i_order_split_create INTO wa_order_split_create.
 IF NOT i_create_order IS INITIAL .
 CLEAR: i_create_order .
 MOVE: wa_order_split_create-docnr TO i_ebeln,
 wa_order_split_create-docitm TO i_ebelp .
 CALL FUNCTION 'ME_EKKO_SINGLE_READ'
 EXPORTING
 pi_ebeln = i_ebeln
 IMPORTING
 po_ekko = i_ekko
 EXCEPTIONS
 no_records_found = 1
 OTHERS = 2.
 IF sy-subrc <> 0 .
 ENDIF .
Fill PO Header
 i_bpoh-comp_code = i_ekko-bukrs .
 i_bpoh-doc_type = i_ekko-bsart .
 i_bpoh-vendor = i_ekko-lifnr .
 i_bpoh-langu = i_ekko-spras .
 i_bpoh-pmnttrms = i_ekko-zterm .
 i_bpoh-purch_org = i_ekko-ekorg .
 i_bpoh-pur_group = i_ekko-ekgrp .
 i_bpoh-currency = i_ekko-waers .
 i_bpoh-agreement = i_ekko-konnr .
 i_bpoh-incoterms1 = i_ekko-inco1 .
 i_bpoh-incoterms2 = i_ekko-inco2 .
Fill PO update indicator 'X'
 i_bpohx-comp_code = c_char_x .
 i_bpohx-doc_type = c_char_x .
 i_bpohx-vendor = c_char_x .
 i_bpohx-langu = c_char_x .
 i_bpohx-pmnttrms = c_char_x .
 i_bpohx-purch_org = c_char_x .
 i_bpohx-pur_group = c_char_x .
 i_bpohx-currency = c_char_x .
 i_bpohx-agreement = c_char_x .
 i_bpohx-incoterms1 = c_char_x .
 i_bpohx-incoterms2 = c_char_x .
 CALL FUNCTION 'ME_EKPO_SINGLE_READ'
 EXPORTING
 pi_ebeln = i_ebeln
 pi_ebelp = i_ebelp
 IMPORTING
 po_ekpo = i_ekpo
 EXCEPTIONS
 no_records_found = 1
 OTHERS = 2.
 IF sy-subrc <> 0 .
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF .
Fill PO Item
 i_wa_bpoi-po_item = i_ekpo-ebelp .
 i_wa_bpoi-material = i_ekpo-matnr .
 i_wa_bpoi-plant = i_ekpo-werks .
 i_wa_bpoi-stge_loc = i_ekpo-lgort .
 i_wa_bpoi-quantity = wa_order_split_create-qty_acptd .
 i_wa_bpoi-po_unit = i_ekpo-meins .
 i_wa_bpoi-tax_code = i_ekpo-mwskz .
 i_wa_bpoi-val_type = i_ekpo-bwtar .
 i_wa_bpoi-item_cat = i_ekpo-pstyp .
 i_wa_bpoi-acctasscat = i_ekpo-knttp .
 i_wa_bpoi-agreement = i_ekpo-konnr .
 i_wa_bpoi-agmt_item = i_ekpo-ktpnr .
 APPEND i_wa_bpoi TO i_bpoi .
Fill PO Item update indicator 'X'
 i_wa_bpoix-po_item = i_ekpo-ebelp .
 i_wa_bpoix-po_itemx = c_char_x .
 i_wa_bpoix-material = c_char_x .
 i_wa_bpoix-plant = c_char_x .
 i_wa_bpoix-stge_loc = c_char_x .
 i_wa_bpoix-quantity = c_char_x .
 i_wa_bpoix-po_unit = c_char_x .
 i_wa_bpoix-tax_code = c_char_x .
 i_wa_bpoix-val_type = c_char_x .
 i_wa_bpoix-item_cat = c_char_x .
 i_wa_bpoix-acctasscat = c_char_x .
 i_wa_bpoix-agreement = c_char_x .
 i_wa_bpoix-agmt_item = c_char_x .
 APPEND i_wa_bpoix TO i_bpoix .
Fill PO Item Schedule
 i_wa_bpos-po_item = i_ekpo-ebelp .
 i_wa_bpos-sched_line = '0001' .
 i_wa_bpos-delivery_date = wa_order_split_create-dly_date .
 i_wa_bpos-quantity = wa_order_split_create-qty_acptd .
 APPEND i_wa_bpos TO i_bpos .
Fill PO Item schedule update indicator 'X'
 i_wa_bposx-po_item = i_ekpo-ebelp .
 i_wa_bposx-sched_line = '0001' .
 i_wa_bposx-delivery_date = c_char_x .
 i_wa_bposx-quantity = c_char_x .
 APPEND i_wa_bposx TO i_bposx .
 CLEAR: i_pargr .
 SELECT SINGLE pargr
 INTO i_pargr
 FROM t161
 WHERE bstyp = i_ekko-bstyp
 AND bsart = i_ekko-bsart .
 CLEAR i_ekpa[].
 CALL FUNCTION 'MM_READ_PARTNERS'
 EXPORTING
 application = c_char_p
 ebeln = i_ebeln
 bstyp = i_ekko-bstyp
 pargr = i_pargr
 TABLES
 x_ekpa = i_ekpa.
 LOOP AT i_ekpa INTO i_wa_ekpa .
 i_wa_bpop-partnerdesc = i_wa_ekpa-parvw .
 i_wa_bpop-langu = sy-langu .
 IF NOT i_wa_ekpa-lifn2 IS INITIAL .
 i_wa_bpop-buspartno = i_wa_ekpa-lifn2 .
 ELSE .
 i_wa_bpop-buspartno = i_wa_ekpa-parnr .
 ENDIF .
 APPEND i_wa_bpop TO i_bpop .
 CLEAR: i_wa_ekpa, i_wa_bpop .
 ENDLOOP .
 CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
 CALL FUNCTION 'BAPI_PO_CREATE1'
 EXPORTING
 poheader = i_bpoh
 poheaderx = i_bpohx
 IMPORTING
 exppurchaseorder = i_new_ebeln
 TABLES
 return = i_bapiret2
 poitem = i_bpoi
 poitemx = i_bpoix
 poschedule = i_bpos
 poschedulex = i_bposx.
 i_order = i_new_ebeln .
 SHIFT i_order LEFT DELETING LEADING '0' .
 i_return-errortype = c_char_i .
 i_return-workarea = c_zsw .
 i_return-message = '064' .
 i_return-variable1 = i_order .
 loop at i_bapiret2 into i_bapiretn where type ca 'EAX' .
 append i_bapiretn to t_bapi_return .
 endloop .
 if t_bapi_return[] is initial .
 i_create_order = c_char_x .
 CALL FUNCTION 'SWD_POPUP_MESSAGE_SEND'
 EXPORTING
 act_return = i_return. "Popup with new PO no.
 ENDCASE . " Docind
 ENDIF .
ENDLOOP.

BADI for return order creation in CRM

Hi group,
I have an requirement. In CRM ,Return order should be created from UBB service contract when change process takes place(Contract termination), ie throgh actions in the UBB service contract. these steps are configured through Actions.
The requirement is, I need to enhance the BADI implemention(COPY_DOCUMENT) by creating a function module. this function module should provide the necessary data for Return Order creation. Is there any function module to create a Return order in CRM or how to proceed? Appreciate if any suggestions
Regards,
Sankar

Hi,
You can use BAPI_SALESORDER_CREATEFROMDAT2 .
In import TESTRUN = X
Description
This parameter is a test switch.
If you activate the switch, the system does not save the document.
Value range
Space = Document should be saved
X = Document should not be saved
Default
Space

Reena Prabhakar - Sales order creation Using BAPI

Hi Reena,
This is Dinesh,i also face problem in Sales order creation using BAPI if you can send me the code it would be great help to me.
Regards,
Dinesh

Anyhow, here is the code that I am using currently which works perfectly well. Not sure if it will be of any help to you, since the values to the BAPI come from the Webdynpro application. I have values stored in my "Test data directory" which I use for testing from the backend.
FUNCTION ztest.
Call the BAPI to create Sales Order
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
    EXPORTING
      order_header_in     = l_order_header
    IMPORTING
      salesdocument       = l_salesdocument
    TABLES
      return              = it_return
      order_items_in      = it_order_items
      order_partners      = it_order_partners
      order_schedules_in = it_order_schdl
      order_conditions_in = it_order_conditions
      order_text          = it_order_text.
READ TABLE it_return WITH KEY type = 'E'.
IF sy-subrc = 0.
*-- error occured
    CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
ELSE.
*-- no error
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF.
ENDFUNCTION.

Need Sample Code for Vendor creation using JAVA API

Hi,
I have a scenario like Vendor creation using Java API.
1.I have Vendors (Main) Table.
2.I have look up tables like Account Group.
3.Also Qualifier table(Phone numbers) too.
Could you please give me the sample code which helps me to create Vendor records using Java API?
I need Code samples which should cover all of the above scenario.
Marks will be given for the relevent answers.
Best Regards
PK Devaraj

Hi Devraj,
I hope the below code might solve all your problem:-
//Adding Qualified field
//Creating empty record in Qualifed table
//Adding No Qualifiers
Record qualified_record = RecordFactory.createEmptyRecord(new TableId(<TableId>));
try {
qualified_record.setFieldValue(new FieldId(<fieldId of NoQualifier), new StringValue(<StringValue>));//Adding No Qualifier
catch (IllegalArgumentException e2) {
// TODO Auto-generated catch block
e2.printStackTrace();
catch (MdmValueTypeException e2) {
// TODO Auto-generated catch block
e2.printStackTrace();
//Creating Record in Qualified table
CreateRecordCommand create_command = new CreateRecordCommand(connections);
create_command.setSession(sessionId);
create_command.setRecord(qualified_record);
try
create_command.execute();
catch(Exception e)
System.out.println(e.toString());
RecordId record_id = create_command.getRecord().getId();
//Adding the new record to Qualifed Lookup value and setting the Yes Qualifiers
QualifiedLookupValue lookup_value = new QualifiedLookupValue();
int link = lookup_value.createQualifiedLink(new QualifiedLinkValue(record_id));
//Adding Yes Qualifiers
lookup_value.setQualifierFieldValue(0 , new FieldId(<FieldID of Yes Qualifier>) , new StringValue(<StringValue>));
//Now adding LookUP values
//Fetch the RecordID of the value selected by user using the following function
public RecordId getRecordID(ConnectionPool connections , String sessionID , String value , String Fieldid , String tableid)
ResultDefinition rsd = new ResultDefinition(new TableId(tableid));
rsd.addSelectField(new FieldId(Fieldid));
StringValue [] val = new StringValue[1];
val[0] = new StringValue(value);
RetrieveRecordsByValueCommand val_command = new RetrieveRecordsByValueCommand(connections);
val_command.setSession(sessionID);
val_command.setResultDefinition(rsd);
val_command.setFieldId(new FieldId(Fieldid));
val_command.setFieldValues(val);
try
 val_command.execute();
catch(Exception e)
RecordResultSet result_set = val_command.getRecords();
RecordId id = null;
if(result_set.getCount()>0)
 for(int i = 0 ; i < result_set.getCount() ; i++)
 id = result_set.getRecord(i).getId();
return id;
//Finally creating the record in Main table
com.sap.mdm.data.Record empty_record = RecordFactory.createEmptyRecord(new TableId("T1"));
try {
 empty_record.setFieldValue(new FieldId(<FieldId of text field in Main table>),new StringValue(<StringValue>));
 empty_record.setFieldValue(new FieldId(<FieldId of lookup field in Main table>), new LookupValue(<RecordID of the value retrieved using the above getRecordID function>));
empty_record.setFieldValue(new FieldId(<FieldId of Qualified field in Main table>), new QualifiedLookupValue(<lookup_value>));//QualifiedLookUp value Retrieved above
} catch (IllegalArgumentException e1) {
// TODO Auto-generated catch block
 e1.printStackTrace();
} catch (MdmValueTypeException e1) {
 // TODO Auto-generated catch block
 e1.printStackTrace();
//Actually creating the record in Main table
CreateRecordCommand create_main_command = new CreateRecordCommand(connections);
create_main_command.setSession(sessionId);
create_main_command.setRecord(empty_record);
try
 create_main_command.execute();
catch(Exception e)
 System.out.println(e.toString());
Thanks
Namrata

Blocking of deleted material in Return Order creation

Hi everyone,
Can somebody please teach me how to block a particular deleted material in Return Order creation. I have already blocked it in Sales Order creation using OVSU.
Thanks in advance.

hi,
same t.code - OVSU
Block f.returns - sales order return
Block for order - sales order
regards
senya

Error with quantity field:Datasource Creation Using Function Module method

Problem with DATASOURCE Creation using Function Module method :
I have created a datasource ZSTANDARD_COST_PRICE using Function Module method . The datasource creation is successfull when I remove the quantity field from the Z table . If I dont remove the quantity field from my Z table it gives an error as "Units Field WAERS for field STPRS of datasource ZSTANDARD_COST_PRICE is hidden". I am not able to remove this error . Please someone guide.
Let me know if my explanation is not clear enough.
Thanks in advance,
Neha.
Z table definition is as below :
MATNR MATNR CHAR 18 0 Material Number
BWKEY BWKEY CHAR 4 0 Valuation area
LFGJA LFGJA NUMC 4 0 Fiscal Year of Current Period
STPRS STPRS CURR 11 2 Standard Price " Here the currency field is WAERS and table T001
PEINH PEINH DEC 5 0 Price Unit
VJSTP VJSTP CURR 11 2 Standard price in previous year
VJPEI VJPEI DEC 5 0 Price unit of previous year.
Edited by: Neha Rathi on Jan 30, 2009 3:03 PM

Hi,
You should add it as one of the main fields as you have added other fields and not as the currency fields...that is..it should be part of the data source and you should be able to see it in RSO2...
Also if added as i said then it will come as new field in the data source...you can either let it be there...or hide it..
also if you want to populate it then you will have to write the code for this fields as well.
Thanks
Ajeet

Return Order creation referanace to billing document.

Hi , Experts,
I have one issue regarding return process , Pls do the needful ASAP.
My question : I have created one direct sales order , After thet i have created PGI & billing , But after created billing document , I want to take return taht goods, So i had created return for same sales order quantity, & also created credit memo. But my problem is, that system allow me futher create return sales order with referance to billing document no. At a return order creation time system only give warning message - (There are already returns for item 000010: 2 EA)
& allow to save return document no. But i want to erroe message after take return all billing quantity. Can any body suggest me, what is the customizing require for this,
Thanks a lot in advance.
Regards;
Happy

Hi, abdul sir,
Here no any error message, My problem is that , why all line item comes in delivery, B'cause i had already deliver 5 line item out of 10 item, Here system take delivered line item with 0 quantity, I don't want that delivered line item at a time in delivery,
Regards:
Happy

Return order creation.

Hi, Expert,,
My issue:
1 ) I had create sales order for 2 Quantity.
2 I had completed PGI for 2 Quantity
3 ) I had complleted billing for this 2 Quantity,
But after billing customer want to return,
then
1 ) I had created return order with references to billing no - for 2 Quantity
2 ) I had completed PGR.- for 2 Quantity
3 ) I had created credit memo for - for 2 Quantity
But by mistake user - created two times return process for that billing document no,
User receive worning message at a time return order creation - is There are already returns for item 000010: 2 EA
But i want to set error message if user create more quantity return order wrt to billing no.
Can anybody send me it's solution ASAP,
Thanks a lot in advance
Regards:
Happy

Hi ..
Since user is creating returns with reference to billing doc , he will not be able to create more quantity than in billing doc.
if he try's it will give error message , since in your case there was already a return order excist that why the erro message displayed an order already excist.
Hope it helps
jinoy

Custom List Form creation using Powershell - SharePoint 2013

Hi,
I have a custom List called 'IssuesList' with 4 fields - "IssueTitle","IssueID","IssueDesc","Status"
While displaying display form I should show 3 fields expect Issue ID i.e. IssueID should be hidden.
and on edit form only Status field should be editable. So using SharePoint designer I created respective Edit form and display forms and changed XSLT to control the display mode on the fields.
I have everything scripted in powershell till now - creation of custom list, publishing pages, webparts etc. however I am looking for how to provision or associate these 2 list forms with IssuesList after I create the list in new site.
I have restrictions on using wsp and site/list template due to business needs. So I need to know if there is any way I can upload these 2 files after I create custom list in powershell and associate them as defaultdisplay and defauteditforms?
Please advise.

Hi,
Per my understanding, you might need to apply these custom forms to a list after list creation using PowerShell.
With PowerShell with SharePoint Object Model, we can hide fields on list forms.
The similar thread below with code snippet will provide more information about this:
https://social.technet.microsoft.com/Forums/en-US/ee6fc2eb-197f-4144-94fa-8a4e438675d9/hide-a-field-from-edit-form-list?forum=sharepointgeneralprevious
If there may be other requirements except for hiding fields, as you have limitation on using custom solution package(which should be preferable in such scenario),
a workaround I can provide is that, after list creation, you can add Content Editor Web Part contains the CSS style or JavaScript to the form pages of a specific list, it will help you hide/disable the specific elements, this can be achieved programmatically.
The code below can add a Content Editor Web Part to the DisplayForm of a list(though in C#):
public static void AddCEWP()
SPLimitedWebPartManager manager = null;
SPFile file = null;
using (SPSite site = new SPSite("http://sp"))
using (SPWeb web = site.RootWeb)
try
web.AllowUnsafeUpdates = true;
file = web.GetFile(web.Url + "/Lists/List018/DispForm.aspx");
manager = file.GetLimitedWebPartManager(PersonalizationScope.Shared);
ContentEditorWebPart webPart = new ContentEditorWebPart();
XmlDocument xmlDoc = new XmlDocument();
XmlElement xmlElement = xmlDoc.CreateElement("HtmlContent");
//xmlElement.InnerText = "Hello World!";
//write the custom CSS style or JavaScript here
string content = "<style>your custom style here...</style>";
xmlElement.InnerText = content;
webPart.Content = xmlElement;
manager.AddWebPart(webPart, "Top", 0);
manager.SaveChanges(webPart);
web.Update();
catch (Exception ex)
//Utility.SPTraceLogError(ex);
finally
if (manager != null)
manager.Dispose();
web.AllowUnsafeUpdates = false;
About how to hide fields on Standard List Forms using jQuery:
http://social.technet.microsoft.com/wiki/contents/articles/21730.sharepoint-2010-conditionally-hide-fields-on-standard-list-forms-using-jquery.aspx
http://stackoverflow.com/questions/10010405/how-to-hide-a-field-in-sharepoint-display-form-based-on-the-field-name-jquery
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Patrick Liang
TechNet Community Support

Restrict Item Category Item Creation using Reference Only

Hi All
Here is the scenario, I want "Restrict Item Category Item Creation using Reference Only"
a.Retrieve document number VBELN from sales order header table VBAK for the current order. Check if the sales order is of type ZAB referencing field AUART in table VBAK.
note : Any changes to existing sales order "ZAB" will be performed in thesame sales order type(ZAB) in VA02 transaction.
b.If step a is passed, check internal table structure for sales order item level as XVBAP-PSTYV for possible item category values of 'ZDEF' for the entered line item and document number (XVBAP-VBELN).
c.If the cancel/change item category values are found on the line item, check internal table structure for document flow (XVBFA) if the cancel/change item category was created as reference:
i.Check if entry exists in XVBFA for the preceding document number field VBELV with value equal to value in the subsequent document number field VBELN. This value must equal the current sales document number VBELN in table VBAK.
ii.The above check must be done in conjunction with the following check:
1.Check if entry exists in XVBFA for the preceding document type field VBTYP_V with value C equals subsequent document type field VBTYP_N with value of C.
d.Once the above checks are passed, collect the item number from internal table XVBAP (Field: POSNR) for the change/cancel item category line item added to the sales order.
e.Check if the item number retrieved in the previous step exists in table VBAP (Field: POSNR) with an item category that is not part of the list of cancel/change item category defined in step b.
f. Check if the item number collected in the previous step exists in the subsequent item number (Field : POSNN) in internal table XVBFA for the row that passed checks in steps b and c.
g.If item number exists, check if this subsequent item number field equals the preceding item number field value (Field: POSNV) in table XVBFA.
h.If step g fails, generate an error message stating that the user needs to the create the cancel/change item category line item with reference to the original line item and do not allow the user to proceed with the transaction.
i.If step g succeeds, allow the user to proceed with the transaction.
can any one send me the logic for this scenario.
Rgds
Chinna

Hi Chinna,
Please use BADI "BADI_SD_SALES_ITEM" to achieve your requirement..
Let me know if you have further questions..
BR
Rakesh

Price difference account posting for return of goods using MR11

HI SAP Expert
When we are running MR11 for goods receipt transaction system is posting reversal document to price difference account instead of inventory account.
In this case relevant details are :-
Price control for Material is S .
PO QTY 190( Purchase order is of M category with sales order linked)
GR qty 190
IR qty 20
Return Qty (ACCM) using MR11 :-170
PO price :-84.74
Standard price : 81.99
GR price :-84.74
When a document is posted using MR11 for reversing goods it has posted value : 14,405.80(170*84.74) to price difference account instead of material account. What could be reason for system behaviour.
With Regards
A N

HI,
check you have material qty in system check in MMBE or MB5B on givin date
if dont have any qty system will hit PRD account its sap stander
Regards
Kailas Ugale

Material Creation Using BDCs.

Hi all,
I have developed a program for Material Creation using BDC.
Material is Being created and that is working well and good.Here i have a Requirement to update the Newly creted material in Ztable.So when i use call transaction mathod,i have written code for updation under the line CALL TRANSACTION.where in iam getting newly creatde material from MARA table,and so it is working perfectly fine..
But our requirement should be sessions method,so when i use sessions method and exeute the program..we face the problem of updation.
the piece of code for updation is updating previously created material.
Literally speaking only the sessions are created ,when the program is executed,material is not created when program is run.Material is only created when the sessions are processed using SM35,
So how should i do here,where should be the updation code written and where will we get the newly created material in sessions method..
Pls Help me in solving this problem

hai priyanaka it might be due to configuration problem
bcos manulay also ur gettign this , so just consult ur MM consultant for soem setting
regards
afzal

HU creation using HUPP3

I have following doubt on Planned HU creation using HUPP3 (since i am using this transaction for the first time and not sure if the client has done any modifications)
1. Is it standard to pack more than one sales order line items in one HU using HUPP3
I have a scenario in which business is creating one HU for more than one line items of a sales order (shipping point for all the line items is same).
The issue is in HU the VEKP_NTGEW & VEKP_BRGEW fields takes the weight of first line items of the HU only.
Customer modified the program SAP standard program.Here they can select multiple line items in single HU but while displaying HU through HUMO t-code it showing only first line item details like net weight.But client want it should show total weight of HU.
Can anybody tell me how to achieve above requirement.

Hi All,
Thanks for viewing the query. I have found out the issue
The client had made some modifications to the program.
In standard SAP through HUPP3 only one line item of a sales order can be packed into one HU

Auto PO creation using purchase requisition

Hi,
I have tried the following steps for auto PO creation using purchase requisition.
i. Maintain Auto PO in Material master Purchasing view
ii. Select Automatic purchase order in Vendor master- Purchase data
iii. Maintain info-record
iv. Create PR through ME51
v. enable source determination during creation of PR
vi. Execute using ME59N
But Auto PO is creating with the same document type (e.g NB) which is used while creating purchase requisition (e.g NB). Following steps have done in SPRO.
1. SPRO - MM - Purchasing - purchase requisition - define document type
a. NB- PR document type LINK TO DI01- PO document type
2. SPRO - MM - Purchasing - Purchase order - Define document type
a. DI01- PO document type LINK TO NB- PR document type
3. There is no linking from NB - NB & DI01 - DI01 but still it is creating auto PO with document type NB iif requisition has been created with document type NB.
Please suggest on this . waiting for ur quick response.
Thanks...
ARATI.
Thanks!
Arati.
Edited by: Rakesh Gupta on Aug 20, 2009 11:00 AM

Hi
Please check the below thread
PR to PO via ME59 -Doc type issue
Thanks/karthik

Return PR creation using QM02

Similar Messages

Maybe you are looking for