Returning no output (intentionally)

Hi,
I have a bi publisher report that generates pdf and is printed out automatically. The problem is that I want to be able to stop this from happening for some data. If I return empty xml a blank pdf file is generated which is no good so the only method I have found is to return false in a datatrigger (which means that the concurrent request gets an "error" status).
My question is this; can I somehow make the concurrent request finish normally but return no output file?

Try a differnt user account and see if the same thing applies.

Similar Messages

Xbacklight returns 'No outputs have backlight property' on Sony laptop

Laptop: Sony VAIO VGN-NW130D
Graphics: Mobility Radeon HD 4500 Series
WM: xmonad
I am trying to get the two brightness adjustment keys on my laptop to work, which they currently they do not. To this end I want to map a xbacklight command to each of these keys.
Problem: running xbacklight alone or with any arguments and options returns: No outputs have backlight property
I read here that "it is a driver issue. The vesa and fglrx drivers simply do not support backlight setting. You may get better results from the radeon driver." (The OP is not me.)
But I am using the Radeon driver (xf86-video-ati), so maybe this is not accurate. However I was using the fglrx driver before this, and the xf86-video-radeonhd driver before that. Is it possible that, even though I have now removed them, some trace of them remains, so that xbacklight mistakenly detects a driver with which it does not work? I closely followed ArchWiki's simple instructions when removing each driver before installing a new one.
Additional info: I am currently using laptop-mode-tools to automatically set brightness upon startup. This is fine if I want a static (or at least not quickly adjustable) brightness, but I do not think there is any clean way to make it work with the Fn keys. laptop-mode-tools writes to /proc/acpi/video/VGA/LCD/brightness but I also have /sys/class/backlight/acpo_video0/brightness which would presumably work as well.
Thank you for any help I have been eating neighborhood children in frustration.
Last edited by error (2010-08-01 03:50:56)

try with setpci command ( for eg setpci -s $DEVICE F4.B=<your brightness level> device is your device bus id)

Acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)

I use the CS6 suite with Acrobat XI at windows platform.
When I want to save a file from InDesign as .pdf with output intention eci_iso_coated_v2_300 the result is a .pdf with more than 300% ink coverage.
I tried to transform the result in Acrobat XI into this standard output intention, but also the result has more than 300 % ink coverage.
What is the reason of this bug?
Before with Acrobat X this worked without problems

Hi Rob,
I was told the new way to work would be to draw files via Bridge direct into the InDesign file
and I thought automatically the color would not be changed.
my colourmanagement setting in bridge for the whole CS6 was ECI isocoated_V2_300
The Illustrator file was saved without color profile.
In this test file I used 3 kinds of black: background of pirate in cmyk 79,34 / 72,78 / 59,38 / 79,88 = ink coverage 291 %
DÜSSELPIRATEN in “black” (if you would convert this in the file with the cmyk button it would be the same ink-percentage as before
“e.V.” was set to 100 % k
I set the preferences for Acrobat from InDesign CS6 as pdf X4 with profile eci isocoatedV2_300 in three ways:
no color conversion
convert to profile
convert to profile keeping existing values
in all tree files the pirates background has 322 % ink coverage instead of 291 %
Why does Acrobat convert “black” in the wrong way? If I click in Illustrator on the 4c button to convert the “black” into 4c it is 291% ink
Acrobat should come to the same result with all profiles: iso coated V2 and iso coated V2_300
The same happens also by saving as .pdf X3 or .X1
The minimum what I expect is, that Acrobat reduces ink coverage for black to 300 %
I also made test with the new ECI profiles for laminated prints from 2012.
And with newspaper profiles
In this case the ink coverage comes below 300 %, but only when I choose convert to profile.
And then the 100 % k converts to cmyk, what I don’t want to have with text.
Is there no way to reduce ink coverage below a special percentage without changing Text 100% k
And is there a bug in Acrobat XI with the ECI IsoCoated_V2_300 Profile? For there is no color reduction below 300 % in all conversion settings.
I can’t test this with Acrobat X or IX, for my computers with this software don’t run with CS6 64 bit.
enclosed you find my files
Kind regards
Lutz Hanbueckers
Hanbueckers Werbung GmbH
Brandsackerstr. 5
40764 Langenfeld
P.O. Box 40 02 01
40242 Düsseldorf
Tel. +49 02173 1 09 44 - 0
Fax +49 02173 1 09 44 - 10
[email protected] <mailto:[email protected]>
www.hanbueckers.de
Visit our site
Steady attractive offers!!!
HR Düsseldorf B 26 480
owner Manager: Lutz Hanbueckers
Von: Rob Day [email protected]
Gesendet: Samstag, 2. März 2013 04:26
An: Hanbueckers Werbung
Betreff: acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)
Re: acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)
created by Rob Day <http://forums.adobe.com/people/rob+day> in InDesign - View the full discussion <http://forums.adobe.com/message/5115613#5115613

Determine ICC output profile (name) in PDF/X output intent

Hi all,
I have a PDF of which I need to determine the ICC output profile (name) of the PDF/X output intent. This is what I have in the 'content stream':
<</Metadata 6 0 R/OutputIntents[<</DestOutputProfile 7 0 R/Info(OFCOM. ISO 12647-2:2004 / Amd 1, Offset commercial and specialty printing according to ISO 12647-2, paper type 1 or 2 $gloss or matte coated offset, 115 g/m2$, screen frequency 60/cm.)/OutputConditionIdentifier(FOGRA39)/RegistryName(http://www.color.org)/S/GTS_PDFX/Type/OutputIntent>>]
How can I, based on this information, determine what the name of the ICC profile in the PDF/X output intent is? Adobe Acrobat's output preview tells me that is should say / find ''ISO Coated v2 300% (ECI)'.
Thanks in advance.
Didier

Thanks! Thought it would be something in that direction. Any tools or libraries you might know that can be used to extract and parse this kind of information (as part of a preflight process or something else)? Adobe tools for instance?

How can servlet return the output as html content with drawing picture?

Does anybody know how can a servlet return the output as html content with drawing picture?
The drawing picture is drawn at runtime by the servlet.

Thanks, BalusC.
But I am not sure if I understand your reply fully.
From my understanding, you are telling me to first generate a html from a servlet with the image <IMG> tag pointing to a servlet which will be responsible to generate an image?
For example, <IMG SRC="http://myserver/servlet/testservlet">
Could you confirm this?

PDF/X-3:2 (PDF 1.3): Destination differs from Output Intent; how to set Destination -

Hello.
In InDesign CS5 (7.0), I set up a document containing greyscale images (profile: Dot Gain 15%) and cmyk-images (profile: Euroscale Coated v2). The latter is also the working space, and it is also the Output Intent Profile Name set in the Export Adobe PDF Dialog under Output – PDF/X. The Colour Settings in the .indd set the Colour Management Policies to Preserve Embedded Profiles (and Colour Conversion is set to No).
Now, when exporting this .indd to a .pdf (PDF/X-3:2 (PDF 1.3)), the Summary tells me that the Destination is ISO Uncoated Yellowish, and Acrobat (View – Navigation Panels – Standards) feels:
Conformance:
Standard: PDF/X-3:2002
ISO Name: ISO 15930-3
Status: verification succeeded
Trapped:False
OutputIntent
Identifier: ISO Uncoated Yellowish
Info: ISO Uncoated Yellowish
—so what was Destination in the export settings now appears as Output Intent, meaning: the Destination overrides the OutputIntent as set in the export settings.
I have no idea where this ISO Uncoated Yellowish comes from. As far as I can see, nothing, neither in the placed content, nor in the document, has this profile set.
In a second document, with the exact same settings as specified above and the only difference that it contains only greyscale images. In this case, Acrobat sees the Identifier as FOGRA1 (which is indeed the (greyed out, unchangeable) setting in the export Dialog's Output – PDF/X – Output Condition Identifiert—but that is the case in the first document, too), and the Info as Euroscale Coated v2. This seems correct, but why might "ISO Uncoated Yellowish" appear in the first case, and how would I get rid of it and set the correct Destination?
Thanks a lot.

No, it isn't a colour space, but there's still grey profiles, specifying e.g. the dot gain.
Links panel does list the gray profiles, but they're not used in anyway.
If you assign different gray profiles in Photoshop the gray profile makes the conversion back to monitor RGB for preview. So here's the same image with 10% and 30% dot gain in Photoshop and the previews are very different even though the output values are the same:
If I place the two images in ID and turn on overprint the previews are identical (the output values are also identical)—via the document CMYK profile, which is EuroScale here. The preview would be the same if you pasted the grayscale into the black channel of a CMYK document:
If I export the ID doc as PDF/X-4 which includes all profiles, the grayscales show as DeviceGray (no profile):

Cmdlet Get-AzureVMImageDiskConfigSet returns no output

The cmdlet Get-AzureVMImageDiskConfigSet seems to return no output. The help shows:
NAME
Get-AzureVMImageDiskConfigSet
SYNOPSIS
This cmdlet returns an object for disk configuration set, which is from the input image context.
SYNTAX
Get-AzureVMImageDiskConfigSet [-ImageContext] <OSImageContext> [<CommonParameters>]
DESCRIPTION
This cmdlet returns an object for disk configuration set, which is from the input image context.
PARAMETERS
-ImageContext <OSImageContext>
The VM image context.
Required? true
Position? 2
Default value
Accept pipeline input? true (ByValue, ByPropertyName)
Accept wildcard characters? false
<CommonParameters>
This cmdlet supports the common parameters: Verbose, Debug,
ErrorAction, ErrorVariable, WarningAction, WarningVariable,
OutBuffer, PipelineVariable, and OutVariable. For more information, see
about_CommonParameters (http://go.microsoft.com/fwlink/?LinkID=113216).
INPUTS
OUTPUTS
Microsoft.WindowsAzure.Commands.ServiceManagement.Model.VirtualMachineImageDiskConfigSet
NOTES
-------------------------- EXAMPLE 1 --------------------------
C:\PS>Get-AzureVMImage -ImageName $img | Get-AzureVMImageDiskConfigSet
I ran:
Get-AzureVMImage | Get-AzureVMImageDiskConfigSet
got nothing back.
I ran:
$OSImageContext = Get-AzureVMImage
verified 276 objects received of TypeName: Microsoft.WindowsAzure.Commands.ServiceManagement.Model.OSImageContext which is what the cmdlet Get-AzureVMImageDiskConfigSet is expecting..
Tried:
$OSImageContext = Get-AzureVMImage
Get-AzureVMImageDiskConfigSet -ImageContext $OSImageContext[0] -Verbose -Debug
still getting nothing..
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable)

nope
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx

Acrobat DC: Ink Manager no longer works, as well as Convert Colors to Output intent?

I often have to flatten CMYK+spot PDFs to CMYK only. I normally open the file, click the ink manager, check "Convert all spots to process" and click OK. That takes care of it.
In the latest update, that no longer seems to do anything at all. If I preflight the file after following the old process, the file still shows spot color errors. In order to convert the spot colors I now have to:
1.) Open the file
2.) Open the convert dialog
3.) Click Ink manager in that dialog,
4.) Check "Convert all spots to process"
5.) Click OK in the Convert Colors dialog.
I realize that isn't a lot of work, but over a lot of files it adds up. Plus it should just work as it used to.
Finally, prior to the last two versions of Acrobat, I was able to open the convert colors dialog, check off "Covert Colors to Output Intent" and click OK to convert all spot colors in a file to CMYK. That option appears to be perpetually grayed out.

Hey SeanL_EPS,
Thank you so much for your valuable feedback. I really appreciate that.
Using Acrobat DC, what happens if you simply type 'Ink Manager' in Search Tools text box on the right hand side and check 'Convert all Spots to Process'.
Also, the option to select an 'Output Intent' from Convert Colors requires the PDF document to already have an Output Intent explicitly set.
You might need to first run the Preflight tool which will explicitly set the Output Intent.
You can also refer the following KB file link from here:
Refer: Acrobat Help | Color conversion and ink management (Acrobat Pro DC)
Let me know if you have further queries.
Regards,
Anubha

Stored procedure, returning array output

i am new to oracle and stored procedure and i have tried to do this but, still no luck, can anyone help me out?
my stored procedure & package is as follows;
create or replace package prebooking
is
    type tr_contract_data
    is
        record (
                custcode customer_all.custcode%TYPE        ,
                des       rateplan.des%TYPE                 ,
                dn_num    directory_number.dn_num%TYPE      ,
                cd_sm_num contr_devices.cd_sm_num%TYPE
    type tt_contract_data
    is
        table of tr_contract_data
        index by binary_integer;
    procedure customer_data (
                                pc_custcode             in customer_all.custcode%TYPE,
                                pc_customer_name        out varchar2                  ,
                                pc_customer_address_1   out varchar2                  ,
                                pc_customer_address_2   out varchar2                  ,
                                pc_user_lastmod         out varchar2
    procedure contract_data (
                                pc_custcode             in customer_all.custcode%TYPE,
                                pt_contract_data        out tt_contract_data
end prebooking;
drop public synonym prebooking;
create public synonym prebooking for prebooking;
grant execute on prebooking to wpa;
-- EOF: PREBOOKING.plh
create or replace package body prebooking
is
    procedure customer_data (
                                pc_custcode             in customer_all.custcode%TYPE,
                                pc_customer_name        out varchar2                  ,
                                pc_customer_address_1   out varchar2                  ,
                                pc_customer_address_2   out varchar2                  ,
                                pc_user_lastmod         out varchar2
    is
        cursor c_customer_data ( pc_custcode customer_all.custcode%TYPE )
        is
            select ccline1 || ' ' || ccfname || ' ' || cclname         customer_name,
                   ccstreet || ' ' || ccaddr2 || ' '     || ccaddr3 ||
                               ' ' || cccity || ' zip ' || cczip   ||
                               ' ' || ccline4                           customer_address_1,
                   ccstate || ' ' || ccline6                           customer_address_2,
                   b.user_lastmod                                       user_lastmod
            from ccontact_all a,
                 customer_all b
            where b.customer_id = a.customer_id
              and a.ccbill = 'X'
              and b.custcode = pc_custcode;
    begin
        open c_customer_data ( pc_custcode );
        fetch c_customer_data into pc_customer_name     ,
                                   pc_customer_address_1,
                                   pc_customer_address_2,
                                   pc_user_lastmod      ;
        close c_customer_data;
    end customer_data;
    procedure contract_data (
                                pc_custcode             in customer_all.custcode%TYPE,
                                pt_contract_data        out tt_contract_data
    is
        cursor c_contract_date ( pc_custcode customer_all.custcode%TYPE )
        is
            select h.custcode,
                   g.des,
                   e.dn_num,
                   d.cd_sm_num
            from curr_co_status      a,
                 contract_all        b,
                 contr_services_cap c,
                 contr_devices       d,
                 directory_number    e,
                 rateplan            g,
                 customer_all        h
            where h.customer_id = b.customer_id
              and b.co_id = a.co_id
              and b.co_id = c.co_id
              and b.co_id = d.co_id
              and c.dn_id = e.dn_id
              and b.tmcode = g.tmcode
              and c.cs_deactiv_date is null
              and h.custcode = pc_custcode;
    begin
        for c in c_contract_date ( pc_custcode )
        loop
            pt_contract_data (nvl (pt_contract_data.last, -1) + 1).custcode := c.custcode ;
            pt_contract_data (     pt_contract_data.last         ).des       := c.des      ;
            pt_contract_data (     pt_contract_data.last         ).dn_num    := c.dn_num   ;
            pt_contract_data (     pt_contract_data.last         ).cd_sm_num := c.cd_sm_num;
        end loop;
    end contract_data;
end prebooking;
-- EOF: PREBOOKING.plhand i am using the following php code to do this
<?php
$conn=OCILogon("USER", "USER", "DB");
if ( ! $conn ) {
     echo "Unable to connect: " . var_dump( OCIError() );
     die();
$collection_name = 1.1;
$stmt = OCIParse($conn,"begin PREBOOKING.CONTRACT_DATA(:INN, :OUTT); end;");
OCIBindByName($stmt, ":INN", $collection_name, 200);
//OCIBindByName($stmt, ":", $collection_desc, 100);
$blobdesc = OCINewDescriptor($conn, OCI_D_LOB);
OCIBindByName($stmt, ":OUTT", $blobdesc, -1, OCI_B_BLOB);
$blobdesc->WriteTemporary($binary_junk, OCI_B_BLOB);
OCIExecute($stmt);
OCILogoff($conn);
?>the error i get when i run this code is;
Warning: OCI-Lob::writetemporary() [function.writetemporary]: Cannot save a lob that is less than 1 byte in C:\apachefriends\xampp\htdocs\POSP\oci53.php on line 18
Fatal error: Call to undefined function OCIDefineArrayOfStruct() in C:\apachefriends\xampp\htdocs\POSP\oci53.php on line 19

Hi Varun,
To combine the first xml-formatted column to one XML, If you want to do that in SQL server, you can reference the below sample.
CREATE PROC proc1 -- the procedure returning the resultset with 3 columns
AS
DECLARE @XML1 VARCHAR(MAX),
@XML2 VARCHAR(MAX),
@XML3 VARCHAR(MAX);
SET @XML1='<person><name>Eric</name></person>'
SET @XML2='<book><name>war and peace</name></book>'
SET @XML3='<product><name>product1</name></product>'
SELECT @XML1 AS col1,1 AS col2,2 AS col3
UNION ALL
SELECT @XML2,2,3
UNION ALL
SELECT @XML3,2,3
GO
CREATE PROC proc2
AS
DECLARE @TbL TABLE(id INT IDENTITY, col1 VARCHAR(MAX),col2 INT,col3 INT)
INSERT INTO @TbL EXEC proc1
SELECT id as '@row' ,cast(col1 as xml) FROM @TbL FOR XML PATH('XML'),TYPE
GO
EXEC proc2
DROP PROC proc1,proc2
/*output
<XML row="1">
<person>
<name>Eric</name>
</person>
</XML>
<XML row="2">
<book>
<name>war and peace</name>
</book>
</XML>
<XML row="3">
<product>
<name>product1</name>
</product>
</XML>
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support

Carriage Returns in output

Hi
I am trying to read an Excel file and display output but all I get is a load of carriage return characters (hollow squares) in the output.
It is ok reading .txt files.
Is there something I need to include when reading .csv files?
If so what would that be and where do I need to include it in my code?
Here is the code I am using:
import java.io.*;
public class FileRead {
    public void file() {
        try {
            // Open the file that is the first
            // command line parameter
            FileInputStream fstream = new FileInputStream("C:/myFile.csv");
            // Get the object of DataInputStream
            DataInputStream in = new DataInputStream(fstream);
            BufferedReader br = new BufferedReader(new InputStreamReader(in));
            String strLine;
            //Read File Line By Line
            while ((strLine = br.readLine()) != null) {
                // Print the content on the console
                System.out.println(strLine);
            //Close the input stream
            in.close();
        } catch (Exception e) {//Catch exception if any
            System.err.println("Error: " + e.getMessage());
}

JamMad wrote:
*"Don't start multiple threads on the same topic: http://forums.sun.com/thread.jspa?threadID=5380830*
*You've wasted peoples time giving you the same information as your previous thread. Which you didn't listen to then."*
Don't accuse me of not listening. None of the suggestions made sense and since I am new to Java I decided to put the discussion in the New to Java forums.
I did get a suggestion from jimbal about my file type being wrong, in this forum, which I never did in the last forum so maybe it is you that can't solve simple tasks?
JMCareful boy, you came to be fead... if you'd rather be flamed that's fine with me... but that won't get your problems solved, now will it.
And let me re-iterate:
{color:#FF0000}{size:60px}*Do not*{size}{color}
start multiple threads on the same topic. It's a waste of peoples time. If you habitualy waste peoples time you will become known as a time waster, and nobody will help you. It's really that simple. If you help: Them's the rules macca.
Assclown!
Cheers. Keith.

Return delivery output Type

Dear All ,
we have defined Z_form for the return delivery .
Now if we go for the Print out on the Header it is Displayes "Gr / GI slip receipt " utput type : WA01
Earlier the same was " Return delivery Slip " and the Output type : WE03
where to chk for the same ?
Regards

hi,
1.Define the form here in SE71...
2. Assign forms and programs: SPRO >> MM >> Inventory management and PI >> Output determination >>> Assign forms and programs..
3. also check the o/p types at M706
Hope it helps..
Regards
Priyanka.P

Return Order output email send to Creator as PDF

Hi All,
Please let me know, how to configure Return sales order output as email send to creator(end user).
Business don't want to send it to customer, They need it in their mailbox as PDF and later they will send it to customer when ever they wants...
Please provide some solution on this issue.
Regards,
Sathiesh pillai.

Hi,
You need to configure the output determination for return order type. The "Internal Output (MAIL)" output type can be used. For sending PDF copy to user himself, the user data should be maintained as "mail partner".
From what i read from your question, you want to send PDF file to user who logged into system to create return order. If yes, then the program need to pick user-id who logged into the system and use his/her email id as communication for sending PDF file. For this, minor code changes will be required to make mail partner defaulted to end-user and not look at customer account partners of the return order.
If user going to be same for every return order, then you may use TVARVC variant table to store his/her email id and check that table while sending email.
regards,
Vaibhav

Does SAP have standard return Po output?

Hi experts
Now we plan to use return po flag on PO item. In case ,it's po which return to vendor, We will check the po return item flag. The return PO form will be some different from the standard one. eg: the title will not be purchase order.
Since in purchase order condition, it could not trigger the item level- PO return flag. Even we craete new output type , it will not be trigger out.
what's the way to setup return po form ? Any one use this return po funciton? Or if it's possible we could create new form and program in form / routine to trigger which form it need be printed?
Thanks
Alice
Edited by: alice zhang on Apr 17, 2008 10:29 AM

Hi Alice,
Based on your settings, if you will created now Return PO (means ticked the Return indicator under Doc type NDC) it will print the all zcac/zceu since you don't have the RTN output type.
Once you create your new form and new output type for Return PO. it will triggred automatic.
Doc type NBC will not be a problem for you since this is for your standard PO.
If you want try this in your Development Client
Do some testing like:
Output type: RTN
PO form ZPCC_PURCHOR_A4 (use this form)
Doc type: NBC
Just create a RTN output type.Then create a PO with Retrn Ind ticked, Doc type is NBC. Then in ME22N/ME23N, do a print preview.
the system should ask you 3 output types:
zcac/zceu/rtn
you have to select rtn, it will obviously print your current PO form since you dont have new one.
if you dont meet this, try to check you message output whther RTN is maintain if not you may maintain manually for this testing only.
hope this is OK.
regards,
Maia

EEM TCL cli_read_line returns whole output

I'm writing a script that excutes some show commands with cli_write, the idea is to use cli_read_line to parse output one line at time, then using cli_read_drain after done reading the results of interest.
However, cli_read_line always returns the entire command output, potentially thousands of characters. In other words, it behaves same as cli_read.
That is slowing down and complicating the script. Using IOS 15.1(4)M1.
Is there a way to make cli_read_line work as per documentation ?

Unfortunately, the cli_read* functions are not non-blocking, and thus cli_read_line will not work the way you want. I'm pushing to add more true send/expect like functionality to the cli_lib functions in a future release of EEM. In the meantime, you might try:
cli_read_pattern $fd ".*"
To read anything. Then parse the return into lines and iterate over them. I had to do something similar in my EASy Remote Command shell tool to get around the limitations in cli_read_line.

RV_PRICE_PRINT_HEAD not returning all output conditions

Hi experts,
I am using the FM 'RV_PRICE_PRINT_HEAD' to get the header conditions but it is returning only specific condition types. I need all the header conditions maintained in the sales order.
Is it possible to get all conditions through this FM ?
Help me on this issue.
Thanks & Regards,
Karthik

Hi Karthi,
as documented this function module will return only conditions that are flagged for print output in calculation scheme.
What is your requirement?
Regards,
Clemens

Returning no output (intentionally)

Similar Messages

Maybe you are looking for