Reuse Release Codes for PR Release.

Hi!
Business requirement has resulted in exhausting the Release Codes for Purchase Requisitions. What might possibly be the impact of using the same Release Codes in different Plants and restricting the users by Roles.
Example:
Release Strategy X: Plant IND1 / Value >0: Release Code ZZ
Release Strategy Y: Plant IND2 / Value >0: Release Code ZZ
Assume that the PR Releasers are different (say Mr. A & Mr. B for Plant IND1 and IND2 respectively):
Create 2 Role:
Role X: Authorization for Plant IND1 and Release Code ZZ
Role Y: Authorization for Plant IND2 and Release Code ZZ
Now if we assign Role X to Mr. A and Role Y to Mr. B, Mr. A will get only PRs from Plant IND1 and Mr. B will get only PRs from Plant IND2. Hence they can use the same Release Code ZZ. But the PRs will be from their respective Plants.
Can you foresee any issues with the above setup? I tested the same in sandbox and it is working fine.
Suggestions welcome.
Regards,
Riju

Dear Riju,
There has not a issue of Release Strategy, you can give the access rigth through role.
But check the muliples plant & Release code.
Regards,
PK.

Similar Messages

  • How to have more than 8 release code for a release strategy

    Hi,
    In standard only 8 level of release is possible for a release strategy.  Our client requires more than 8 levels i.e., more than 8 release codes for a release strategy.  How can we achieve this?
    Pls provide your views/ideas.
    Reards,

    Hello,
    In case you require more than 8 levels in release strategy , write to SAP, maybe they could give a fitting reply.
    By the way , 8 levels of release should be more than enough . Try to incorporate the client business process
    within this.
    Regards
    Anis

  • Function Module to fetch Release Code for PReqs

    Hi,
    Is there any function module to get the current release code applicale by passing the requisition number?
    Example : If we have 4 levels of approval, say A1,A2,A3 and A4, and I want to know with what release code shall I release the requisition.
    If release has benn effected for the requisition with codes A1 and A2 and if I query with the function module what is the current release code applicable, then it should give A3 or atleast a result that A2 has been the last release code effected.
    Also where is the release related info stored ? I mean which tables...
    Not the release strategy related info but the release effected info.
    Dont worry about points...

    Hi
    Pur requisition Release Codes are stored in <b>T161E</b> table
    Release code is linked with Release strategy in <b>T161F</b> table
    Link the code with Release strategy field in <b>EBAN</b> table
    Also check the fun modules
    MM_CHECK_RELEASE_CODE_EQUAL_KI
    MM_CHECK_RELEASE_CODE_NOT_KI
    ME_RELEASE_REQUISITION
    BAPI_REQUISITION_RELEASE
    Reward points if useful
    Regards
    Anji
    Message was edited by:
            Anji Reddy Vangala

  • Transaction code for bill release

    hi all, help me in finding of the transaction code for bill release
    thanks..

    for  Release Orders for Billing
    Tcode:  V.23
    Program:    RVAUFSPE      
    can check here
    http://www.easymarketplace.de/transactions-u-z.php
    reward if useful
    santhosh

  • ME21N - in which table saved the release status for specific release code ?

    and for the specific po number.

    Hi
    You will find all Release codes in T16FS
    Release procedures are used in condition tables to control whether the condition types for these condition tables have to be read during pricing condition determination or not.
    If the condition table status is released then only the condition types will be read during pricing determination. If the status is not released, then they can be used for information purposes or for simulation of pricing.
    The release status is controlled by processing status too, which can be seen in condition record creation screen.
    So in crux, the processing status with Release status help in simulation of pricing, blockign the condition records from being read during pricing etc.
    For more information an F1 help on the following path will give you some more information.
    SPROSD-BF-PRICING-DEFINE PROCESSING STATUS----Here read the documentation meant for this link. You will get some more clarity on this.
    <b>Reward points</b>
    Regards

  • How to get current release code for PO

    Dear ALL,
    We need a FM or method , which can give us current release code for PO.
    We have PO number with us and PO details like Release strategy and release group.
    Please help, if anybody knows the way.
    Regards,
    Nilesh

    Hi,
    check table EKKO you will get details for that  release code 
    and check following link
    [http://www.****************/Tutorials/Workflow/POReleaseStrategy/Details.htm]
    Regards
    Kailas Ugale

  • Two release code in one release strategy

    Dear all,
    Good Day!
    how can i create two release code in one release strategy on Purchase Order
    Release code is 07 - P & L Manager and 18 - President
    07 will release up to 500,000.00
    07 and 18 will release 500,000.00 and  up
    thanks in advence,
    Ermin D. Concepcion

    Hi Ermen,
                    I am not getting the problem, as Mr Barik has already suggested you the correct solution, if you want the path then the path is
    IMG>Materials Management>Purchasing>Purchase Order>Release Procedure for Purchase Orders-->Define Release Procedure for Purchase Orders.
    Here you must have already designed the Release codes, Release Indicator and release groups for your strategy, you have to define the "Release Strategies".
    Select the group and the strategy and put in the Release codes. and proceed.
    Here in the classification TAB please give the values, if this release strategy is to be triggered for less then 500000 NETW field.
    and same way define another Release strategy with The NETW value greater then or Equal to 50000.01
    I guess you were asking the same thing.
    Regards,
    Yawar Khan

  • Why can we only use 1 release class for overall Release of Purchase Req?

    Hi,
    After realizing that it would be beneficial to use more than one release class for overall release of Purchase Requisition with classification, in use with release groups for overall release, I now ask if someone knows why SAP has chosen to only allow 1 release class for overall release of Purchase Requisition?
    In my scenario I would like Release group US, used for release strategies for US-plant to be able to use 1 release class with a specific set of characteristics.
    For example class REL_PREQ_CLASS_OVERALL_VALUE_IN_USD including a characteristic PR_TOTVAL_USD looking at CEBAN-GFWRT. The chosen currency for this characteristic would be USD.
    I would then like to allow Release group FR, used for release strategies for FRANCE-plant to use another release class with another set of characteristics.
    For example class REL_PREQ_CLASS_OVERALL_VALUE_IN_EUR including a characteristic PR_TOTVAL_EUR looking at CEBAN-GFWRT. The chosen currency for this characteristic would be EUR.
    In this way the release strategies for the respective release groups US and FR, could maintain their overall limit values in their respective release strategies in their own currencies.
    1. Observe that I do not want to use the same Release class for both release groups for overall release, even though I know that this is currently the only allowed option, as far as I've understood.
    2. Observe that I do not want to specify the two characteristics PR_TOTVAL_USD and PR_TOTVAL_EUR for overall value in the same release class, as this would lead to double maintenance for a large number of release strategies. Also consider the maintenance when new countries with new currencies want release strategies.
    3. Observe that I only want to use overall release.
    What I'm trying to avoid is having to continuously translate local business USD overall value limits to limits in the currency chosen for the overall value characteristic. If this for example is specified in DKK, this would lead to a need to adjust the overall value limits as soon as the exchange rate between USD and DKK changes in the system.
    Please consider this simple example:
    Local requirement is that USD purchase requisitions should be blocked when the USD value is above 1000 USD. However in my release strategy I would have to maintain a value of >5365 DDK, if DKK is chosen as the currency for overall characteristic.(e.g exchange rate 5,365).
    Next month the currency exchange rate in the system between USD and DKK has changed, and therefore I would have to go into CL24N and maintain the value to reflect the new exchange rate between USD and DKK. Lets say it has gone up to 5,435. I would now have to maintain a value of > 5435 DKK in my release strategy to correctly reflect the local business requirement of 1000 USD.
    So if anyone could please explain why SAP has taken the decision to make the Release class for overall release client specific that would be much appreciated and awarded accordingly. Also if you have any suggestion on how I could obtain the above scenario on maintaning overall value limits in different currencies than that would be awarded to.
    BR Jakob F. Skott

    You can give feed back to Apple from the iTunes drop-down menu in the iTunes menu bar..
    You can also contact the iTS Customer Service from the links on this page - http://www.apple.com/support/itunes/store/
    MJ

  • When Oracle 9i release 2 for Linux releases?

    Hi all,
    sorry for my borther, but I really wanna know the exact date that Oracle 9i release 2 for Linux releases?
    Thanks
    xiao

    Try here...
    http://technet.oracle.com/software/products/oracle9i/htdocs/linuxsoft.html

  • Release Group for PR Release Strategy

    Hi ,
    When i am trying to define new "Release Group" AA , with Class "Z_PR" (it has Plant and Item Value as charcteristics ) , I am receiving message "Please Check Release Classes" , Message no. ME492.It doesn't allow me to save this new release group.
    Please also note that other two release Groups are already available.
    Do u know what I am missing  and how can I save my Release group ?
    ALSO as per the LONG text of this prompted message
    "Diagnosis
    Here you can assign release groups to release classes. Only one release class should be used within the release groups for overall release and the release groups without overall release in each case. However, in this instance several release classes have been used."
    What does it mean ?
    Sandeep

    Hi,
    The message has explained the problem.
    You cannot have two classes for the same document release and you are tryng to break this rule by adding another entry (the fact that you have give it a different release group does not make any difference this is still another class for the same document.)
    You should be able to do what you want without the need for a new release group or additional class, after all everyone else that uses SAP is using one class per document.
    Why diod you think that you needed another release group / class?
    Steve B

  • Date of Final Release Indicator for PO Release

    Is there a table in SAP that provides the date the PO was approved for Final Release? I know that through ME23N you can get this information in the Environment and Header Changes area, but we would like to add this information to a report and are having trouble locating where SAP is storing the data.

    Hi,
    Pass into CDPOS table:
    OBJECTCLAS  = u201CEINKBELEGu201D , OBJECTID = PO Number (EBELN), T. Code = u201CME28 or equal to ME29Nu201D and Get all change document no. (CHANGENR)
    TABNAME = u201CEKKOu201D, u201CField Name= FRGKE, Old Value = u201C0u201D and New value = u201C1u201D in to CDPOS and get latest change document number (CHANGENR).
    Then pass CHANGENR into  Change document No (CDHDR- CHANGENR), OBJECTCLAS = u201CEINKBELEGu201D,
    U get who has released and date also.
    Regards,
    chinna

  • Release codes  Indicators in Release procedure

    Hi sap gurus
    In my release procedure Configuration, we have 4 release codes
    01  engineer
    02  Manager
    03  DGM
    04  GM
    the release indicators must be configured such that if any value changes or qnty changes is done by 04 GM code it must be re-released by 03 DGM only,
    and it should go back to codes 01 and 02 for approval again,
    i used  4 and 6 indicators for codes   04 and 06  but could not find any difference nor my requirement was met
    can any one pls  tell me how to meet the requirement.
    1     Cannot be changed
    2     Changeable, no new determination of strategy
    3     Changeable, new release in case of new strategy
    4     Changeable, new release in case of new strat. or val. change
    5     Changeable, new release if new strategy/outputted
    6     Changeable, new rel. if new strat. or value change/outputted
         Changeable, new release in case of new strategy
    also what is the change in codes 3,4, 5 and 6 .
    Thanks and Regards
    Sathish

    Goto This thread http://www.sap123.com/showthread.php?t=59
    it will explain you averything

  • Release code - Purchase requisition - Release Procedure

    Hello,
    In the purchase requisition release procedure with classification, we are defining release codes say K, P etc.
    My doubt is , Is this being defined else where based upon the designatin of the person in the organisation, or else, we are defining here straight away?
    Best regards,
    K.Kumaran.

    HI
    You are correct, you need to define the release code there only. There is no other place where it is defined. What you have to ensure is  make sure that it is of Two character and not single. Assign the codes against the designation of the person as per your requirement.
    Regards

  • RELEASE CODES IN SERVICE RELEASE STRATEGY

    Dear All,
    I have created a Service Group and assigned three release codes.But when I am trying to simulate the release in release strategy the release codes are not displayed.
    Where have I gone wrong????.
    Someone please help.
    REgards

    Did you maintain the combination of 'release group', 'release strategy' and 'release codes' under 'release strategies? You need to maintain this combination before simulating the release. Also, ensure after entering the said combination verifying 'relase preqreuisites, release statuses, assignment of class and then simulating the release.

  • T.code for viewing released po's alone

    Dear all,
    Is there any Std T.Code available in SAP for knowing the released PO's in a company.
    also is there any report available for viewing the Pending PO
    Points will be rewarded for good solution.
    Thanx  in advance.
    velu

    Go to ME2n
    From top go to dynamic sylection.
    In header details select release indicator (double click on that).
    Enter only value for relaesed po from dropdown.
    execute report.
    Revert back if your problem is not solved.
    Cheers,
    SantoshSP
    Reward if useful

Maybe you are looking for