Reverse engineering tool from the uml modeling tutorial

My problem arises at the point where the tutorial wants you to generate code. I generate the code for the bankAccount.java and the accountTest.java and that works fine. I add setBalance(getBalance()+amount); to bankAccount.java. I then add the main class to the AccountTest.java and reformat the code. That all works fine. Then when I do the reverse engineering going through steps 8-10, the Model Element Overwrite Authorization dialog box, never appears, and the main() method never gets written back into the AccountTest class. Does anyone have any suggestions as to why this is happening?

What version (or build) of UML are you using? You can find out by going Tools->Module Manager, find a uml module under UML category, right click on the module and bring up Properties, build number is listed under "Expert" section. What's your system platform? JDK?
In step 9, is the target uml project selected? Do you have other uml projects open at the same time?

Similar Messages

  • ANN: Reverse-engineering tool from Logic Explorers Inc.

    Logic Explorers Inc. announces the beginning of the beta program for the CodeLogic
    reverse-engineering and code analysis tool. CodeLogic is implemented as a plugin
    for JBuilder, JDeveloper, and the standalone application. Among the major features:
    - Analyses any Java source code
    - Fully automatic generation of interactive UML Class and Sequence (sic!) diagrams
    - Unique Execution Flow diagram
    - Unique Variables Backtrack diagrams
    - Graphical Code Navigator
    - Zoom and filters
    - Intelligent Diff utility
    - Knowledge Base
    To get more information, visit Logic Explorers Inc at
    http://www.logicexplorers.com

    I would go with the Forms-Builder itself. If you want to analyze the code and see what action is done at which point, its best to do this in the tool where you developed the application. (You also wouldn't analyze a .Net-application using Notepad ;) )

  • UML Modeling / Reverse Engineering Tool: Rational Rose orSELECT?

    Can anyone comment on the relative strengths and weaknesses of the Forte
    modeling / reverse engineering tools from Rational and SELECT? A brief
    discussion of tools for reverse engineering Forte applications appeared in
    June '98, but it was not clear how these products compared.
    Regards,
    Rob
    Robert Black
    Descartes Systems Group Inc.
    Waterloo, Ontario
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    What version (or build) of UML are you using? You can find out by going Tools->Module Manager, find a uml module under UML category, right click on the module and bring up Properties, build number is listed under "Expert" section. What's your system platform? JDK?
    In step 9, is the target uml project selected? Do you have other uml projects open at the same time?

  • UML reverse engineering tool

    Hi,
    I am searching for an advisable GNU UML reverse engineering tool. (e.g. a plugin for eclipse.)
    On internet I could only find try versions which I have to purchase.
    Any recommendation?
    -Aykut

    http://onesearch.sun.com/search/onesearch/index.jsp?qt=uml+reverse+engineering&subCat=siteforumid%3Ajava31&site=dev&dftab=siteforumid%3Ajava31&chooseCat=javaall&col=developer-forums

  • Developing Reverse Engineering Program -- JAVA to UML what needed

    Hi there,
    I am wondering why people want to develop reverse engineering?? it is useful? but developing the reverse Engineering sound interesting for me.
    Anyway I just intend to figure out how to develop a reverse Engineering program FROM java to UML diagram. Which create Use cases, class and sequence diagram. Is that possible??
    what kinds of Knowledge I need to know in order to develop reverse Engineering. Is there any tutorial that can teach me on how the Reverse Enginneering works?
    Does Reverse Enginneering check words by words in order to develop the program?
    That all...

    Hi,
    You need a parser, like ANTLR, plus a java grammar for that parser (antlr has one). You need a uml model implementation like MDR, EMF or the obsolete NSUML. You need a diagramming library like GEF or JGraph. With those 3 components you could build your own r.e. tool. search google for urls.
    you're interested in the subject so try to read http://citeseer.nj.nec.com/545406.html and related papers.
    you'll need to understand the java language specification (java.sun.com), JSR26 (jcp.org) [a std mapping from java to uml], and the uml metamodel (download the specification from www.omg.org).
    many reverse engineering scenarios are possible, although not all tools have found time to implement them.
    eg. java class -> class diagram
    java method -> sequence diagram
    I don't know of any tutorials. But you could look at the implementation of ArgoUml (argouml.tigris.org) and ask questions on the developer mailing list.
    That should keep you busy for the rest of the year...

  • Powerpivot Error on Refresh -- "We couldn't get data from the data model..."

    I'm using Excel 2013 and Windows 8.1.  I have a spreadsheet I've been using for over a year, and I've just started getting this error message when I try to refresh the data.
    "We couldn't get data from the Data Model.  Here's the error message we got:
    The 'attributeRelationship' with 'AttributeID' - 'PuttDistCat9' doesn't exist in the collection"
    Any idea how I can fix this problem?  I haven't changed anything related to that particular attribute.  All the data is contained in separate sheets in the workbook, so there are no external sources of data.
    Thanks.
    Jean

    Thanks for all the suggestions.
    I found a slightly older version of the spreadsheet that still refreshes properly, so I don't think I have any issues with the version of Excel or Power Query.  (I've had this same error before, and I believe I applied the hotfix at that time.)
    I think this problem started after I updated a number of the date filters in the pivot tables.  I haven't made any changes to the data model, and the only updates I've made were to add data (which I do all the time), and to change the date filters on
    the pivot tables.
    As suggested, I added a new pivot table querying one table (the table with the attribute that shows up in the error message), and it worked fine.  I can also refresh this pivot table.
    Then I tried adding a pivot table which went against several tables in the data model (including the table in question).  The pivot table seemed to return that data properly.  However, when I tried to refresh it, I got the same error message ("we
    couldn't get data from the data model..."). 
    Dany also suggested running the queries one at a time to see which one is in error.  Without checking all the pivot tables, it appears that any which use the table "HolePlayedStrokes" generate the error (this is the table with the attribute
    mentioned in the error message).  Pivot Tables without that particular table seem to refresh OK.  Unfortunately, that is the main table in my data model, so most of the pivot tables use it.
    Any other suggestions?  I'd be happy to send a copy of the spreadsheet.
    Thanks for all the help.
    Jean

  • My pdf reezes when I click on COMMENT. I am trying to get at the tools to edit a pdf. If I use the tools from the toolbar, there is no issue, but once I click COMMENT, the document freezes and I have to open Task Manager to crash it. This started in the l

    Sorry, I am new to the type of problem-solution process and I do not know how to edit my first statement. My true statement is below:
    My pdf freezes when I click on COMMENT. I am trying to get at the tools to edit a pdf. If I use the tools from the toolbar, there is no issue, but once I click COMMENT, the document freezes and I have to open Task Manager to crash it. This started in the last seven days (3.31.15).

    I answered your questions below, BUT while I was searching for properties, I found the REPAIR ACROBAT INSTALLATION feature, did the repair and (Voila!) the issue was resolved!
    Thanks for making me search for information.
    Karen
    I am using Acrobat XI Pro, version 11.0.10.32.
    I did not create the file I was working in during the freezes, so I tried a PDF that I created with Adobe and it also freezes when I click on COMMENT. I did discover that the COMMENTS plug-in is loaded. (see image
    I have used COMMENT for years without this issue occurring. It started in the last 2 weeks.
    I could not find Properties under the file menu, but found a security setting in Preferences under the Edit menu. It did not have a way to allow/disallow COMMENT.

  • Can't use any tools from the toolbar

    I'm running  InDesign CS6 ver. 8.0.1 on a Windows 7 64-bit pc.
    InDesign has been running perfectly for about two years on this pc until about a month ago when I suddenly couldn't use the tools from the toolbar any longer.
    I have searched for a solution and found http://helpx.adobe.com/indesign/kb/indesign-tools-panels-dont-respond.html.
    I have followed the instructions mentioned in the KB-article but it didn't change anything for me and certainly didn't solve the problem.
    Any help or suggestions will be highly appreciated!

    The KB-article recommends using font size = 100% and avoid Aero themes. I did use the recommended font setting already and I changed the theme to Windows 7 Basic. I turn off my computer every night and I have tried to use the toolbar several times during the last month. Without any luck :-(

  • How can I delete the gap tool from the tools panel?

    I find it useless and I want the type tool where it has always been.
    I'd like the pallets to be layed out like indsign CS3.
    Thank You.

    You can disable or remove it from the Extension Manager, but you can't remove the Page Tool that I know of and when you remove a tool from the toolbar things don't shift upwards, so you just have a gap where the Gap Tool used to be. Not all that helpful. If you do your toolbar as single column rather than the dual column that I prefer it's a non-issue.
    Hope that helps.

  • CS6:  'lost' the T Type tool from the left hand tool bar. [was:A question]

    I have CS6 and ghave suddenly 'lost' the T Type tool from the left hand tool bar. How do I get it back please?

    Do you have the Text on a Path tool in it's place, or no tool at all? If you press and hold any tool with samll triangle in the lower right corner, like the text tool, it will expand to show you the other tools available in that spot.

  • Blur Gallery tools from the Filters menu in PsCC

    When I try to use the Blur Gallery tools from the Filters menu in PsCC the control overlays which should display on the image do not appear. How do I get them?

    You see the orange (on Linux gray) Firefox button if the Menu Bar is hidden, so you need to hide the Menu bar via View > Toolbars, also accessible via Firefox > Options.<br />
    If you need to access the hidden Menu bar then press F10 or hold down the Alt key to make the Menu Bar appear temporarily.<br />
    You can place the Tab Bar on top.
    * View > Toolbars : [ ] Menu Bar
    * View > Toolbars : [X] Tabs on Top
    * http://www.mozilla.com/firefox/features.html

  • Lost the colortheme tool from the left toolbar

    Hi! I just installed the Indesign 30 days trial. When I started learning how to use it I accidentally some how losted the new colortheme tool from the left toolbar and now i cant find it anywhere. Any idea how to get it back?

    Pretty sure! It was there firts but when I clicked it it some how losted… Where could it be? Can’t I take it to use any else where than from the left toolbar? Like from the main menu?
    -Heidi
    Lähettäjä: Eugene Tyson
    Lähetetty: 10. lokakuuta 2014 13:41
    Vastaanottaja: Petäjämäki Heidi
    Aihe:  Lost the colortheme tool from the left toolbar
    Lost the colortheme tool from the left toolbar
    created by Eugene Tyson<https://forums.adobe.com/people/Eugene+Tyson> in InDesign - View the full discussion<https://forums.adobe.com/message/6811852#6811852>

  • Reverse Engineering Synonym from Oracle data base

    Hi All
    I am using ODI 10.1
    i want to reverse engineer synonames from my oracle database .
    When i am reverse engineering the tables and views the datastore is showing the Columns in Columns tab.
    But for Synonyms the the Column names are not available.However it is showing the data in viewdata.
    Please help me

    Hi,
    * In Topology Manager, open your Oracle Data Server and go to "Properties" tab.
    * Add a new property with key "includeSynonyms" and value "true".
    ODI only reverse engineer Private Synonyms .
    Thanks,
    Sutirtha

  • Get WorkStatus from the other model issue (EPMWorkStatus)

    Hello,
    I’ve faced an issue with EPMWorkStatus formula. What I have:
           Two categories, let’s call them C1 and C2. C2 is a copy of C1 (was copied with standard copy package)
           In C1 there are some work statuses assigned
           In C2 there are no work statuses assigned yet
           I have two models, let’s call them M1 and M2. Work statuses are configured only for one model – M1. And the driver dimension presents only in M1 model
           Dimensions involved in work status assignment are Category (C type dimension), Time (T type dimension), P_PROJECT (U type dimension) and the driver dimension WFSTATUS (U type dimension)
             I have 3 statuses, let’s call them s1, s2, s3 (in this order)
           I have 2 connections: one to connect to M1 (let’s call it Connection1) and the other to connect to M2 (Connection2)
    I have workbook saved in M2. And I need to get work status with EPMWorkStatus formula from model M1. It seems to be a pretty easy task – just to point “M1” (model name) in “Connection name” parameter of the EPMWorkStatus formula:
    =EPMWorkStatus(M1,0,”C2”,[any Time dim base member], [any P_PROJECT dim base member],[any WFSTATUS dim base member])
    But I faced an issue. The formula returns value “s3” though there are no work statuses set for C2 category because I just created it. And there’re also no records for C2 category in generated work status table for the model M1 (I checked it at SE16 transaction). That is the formula should have returned “s1” value.
    I made some investigations and found out that if I connect using Connection1 (then change active connection to Connection2), then I got the correct results. But if I connect using Connection2, I always have the incorrect results. Even if I connect using Connection2 and then change active connection to Connection1 I have the incorrect results as well. So the results depend of what connection I used to log on (“Log on” button in Excel EPM tab).
    I also found out that received status from the EPM formula when I connect to Connection2 depends of the status I have in the same scope for category C1. That is if I have “s1” status for C1 category, I will have “s1” status for C2 category.
    How can I get the work status from the other connection?

    Hi Mikhaili,
    Save template by marking  "do not store connection"
    Go to edit report -> options and select "do not store connection"
    Regards,
    Shrikant

  • Run Microsoft Fix It tool from the cmd line?

    I have a rampant issue across the network I manage where Java installations have been corrupted. The only way that I can seem to remove the corrupted installation is to run the Microsoft
    Fix It tool.
    Since it's somewhat impractical to do this manually for 200+ workstations, is there a way do remove Java 7 update 9, 7 update 10, and 7 update 11 from the command line using the fix it tool?

    The likely problem is that your path is targeting the wrong version of java.
    Try the following first (I'm assuming a Windows installation):
    Navigate to your %PROGRAMFILES%\Java folder
    You may see multiple installations of Java - look for the most recent update (assuming the install had no errors)
    Launch a command prompt within your %PROGRAMFILES%\Java folder and then change to the relevant java version and retry your commands from the bin folder using the full path to your java file(s). If it works then we have found the culprit.
    You now need to edit your environment variables to point to the correct path.
    Go to your environmental variables, and edit the PATH (CLASSPATH if necessary), changing
    On 32 bit Windows
    "C:\Program Files\Java\jdkINCORRECTJAVAVERSION\bin\" to
    " C:\Program Files\Java\CORRECTJAVAVERSION\bin\"
    On 64 bit Windows
    "C:\Program Files (x86)\Java\jdkINCORRECTJAVAVERSION\bin\" to
    "C:\Program Files (x86)\Java\CORRECTJAVAVERSION\bin\"
    love is rock!!!
    That's a different issue entirely.
    The problem is that during an upgrade of Java, the installation of java appears to get corrupted on about 1/3 of of all workstations. After that, Java doesn't work, the control panel icon throws an error if you try using it, and installation/upgrades/uninstallations
    are impossible without using the Fix It tool.

Maybe you are looking for