Revoke the Status NCMP status in a PM order

Hello All,
I closed a PM order (IW32), by choosing 'Do not Execute'. (Path Menu: Order>Functions>Complete --> Do not Execute ).
thus the order is closed and now i am unable to edit the order.
there is no option to revoke the status (all functions are in grey, i cannot choose them).
How can i revoke it?
Thnaks in advance,
Ranjit

I think that they meant for you to use the SHD0 option to prevent users from selecting the "Do no execute" option in future orders.
There is nothing you can do (without direct table updates) to remove this status once it is set.
Another option is to use a user-exit to validate that the user is permitted to set this status (may be possible via authirsation too)
PeteA

Similar Messages

Get back the Data mart status in ODS and activate the delta update.

I got a problem when deleting the requests in ODS.
actually there is Cube(1st level. it gets loaded from an ODS(2nd level). this gets loaded from 3 ODS'S( 3rd level). we were willing to delete recents requests from all the data tardets and reload from PSA. but while delting in the request in ODS(2nd level), it has displayed a window, showing as follows.
- the request 132185 already retrived by the data target BP4CLT612.
-Delta update in BP4CLT612 must be deactivated before deleting the request.
- Do you want to deactivate the delta update in data target BP4CLT612.
I have clicked on execute changes in the window. it has removed the data mart status for all the request which i have not deleted.
in the same it happened inthe 3 ODS's(3rd level).
I got clear that if we load further data from source system. it will load all the records from starting.
so to avoid this can any body help me how to reset the Data mart status and activate the delta update.

Hi Satish,
U have to make the requests RED in cube and back them out from cube,before u can go for request deletions from the base targets(from which cube gets data).
Then u have to reset data mart status for the requests in your 'L2 ODS' before u can delete requests from ODS.
Here I think u tried to delete without resetting data mart status which has upset the delta sequence.
To correct this..
To L2 ODS,do an init without data transfer from below 3 ODS's after removing init request from scheduler menu in init infopackage.
Do similar from L2 ODS to Cube.
then reconstruct the deleted request in ODS.It will not show the tick mark in ODS.Do delta load from ODS to Cube.
see below thread..
Urgentt !!! Help on reloading the data from the ODS to the Cube.
cheers,
Vishvesh

Customized Pf Status along with the standard Pf status

Hi all
I have created an ALV report and has its default pf status which includes all function like sum ,sort, export, variants save etc.
I have a requirement to have an extra push button along with this PF status.
I have created a pf status with this button.. and activated and called in REUSE_ALV_GRID_DISPLAY and did everything..
But in my output, only my customised pf status is displayed ie only the push button is displayed and all other standard functions are gone..
Can anyone help me to solve this problem.
Ie I want one push button along with the standrad pf status in ALV report using REUSE_ALV_GRID_DISPLAY .
Cheers
Christina

Hi All
Creation of new button in output refer below document and screen
if you want to add one more button in the Red line like below.
Reffer Below steps after that you can create or change STANDARD Gui in the program .
Go to Se41 give details like below.
Select Copy Status button in up. As shown below screen.
You will get below screen. Provide your custom program name.
Like below screen. Click on Copy.
You will get below screen click on copy button.
You will get below status.
Click on Activate like as shown in below.
Click on OK button you will get it in your program.

Report to check the WBS "system status"

Hello friends,
Would anyone know for a standard report where I can check for the WBS "system status"?
i.e.: I want to know everything I have in AVAC status
Thanks and Regards
Alex

You can get the system status of WBS in CN41, Execute the report , after it use the change layout option, select status.
System will display you user / system status for all the PS Objects.
With Regards
Nitin P.

Where we check the Project closing status?T.code for List of Closing Projec

Dear Guru's,
Where can we check the Project closing status? Can we change the closing status if want to do some modification, and what is the transaction code that we to view the list of closing project.
Regards,
Kalyan

1.You can find the project status ( all the status ) in any project maintenance transaction for ex. Run Cj20n > Open you project> on the basic data tab you will find the project status.
( If you want to see the status of other PS oject than click on that object, similarly you will get the status of that object on Basic data tab. )
2.Yes you can change the closing status of proejct for midification. path is clickon the object for which you want to change the closed object > Edit> Status--> Close --> Undo.
3.For the list of Project status go to CN41
on the projectno. input line click on multiple selection--> give the proejct no. list for which you wanted to see the status. -->enter --> Excute.
Report will open in screen. in that report go to toolbar and click on 'choose filed' button.(F5) -->one pop up window will open -->right handside scroll down in that window >select 'status' field and move it to left side>enter
project status will be shown against you project list. you can verify the same in maintenance txn.
If you have activated user status the same will also get populated.
You can downlaod the same in Excle file path is : Evaluation menu>export>save to file. ( via filtering in Excle you call do all the analysis realted to project status how amny are in clised status etc. )
Regards
Nitin

IP Job in BW finished, but how can I check the IDoc receive status in BW ?

Hi,experts
After I execute a Infopackage with loading more than 200000 records data, the infopackage monitor show me yellow light, 186020 from 200000 records. this infomation still show me till now, seaval hours,it looks pause here.
And I check the request in the R/3, the Job has finished. as you know it means the R/3 push the IDoc already finished.
and how can I do now ? or how can I check the IDoc receive status in BW side?

Hi,
I too had the same problem, i executed the following to solve the proble, may be this will help you:
1) Go to T-code SM58 and select TRFC and press F6,
2) For manual push of I-Docs, GO to T-COde BD87 select perticular idoc and see the status if it is not executed properly then do the manual push by pressing Execute option,
Thanks,

T code to check the job run status

Hi Gurus,
I am filling the setup tables for inventory, but i didn't run in background. I clicked on execute button, but suddenly i got disconnected from net and my server also.
Now i have to check the job run status whether it is running or not.
Request you to provide the suggessions.
Thanks & Regards,
Saketh

Hi,
if you ran job in background you can see at SM37.use proper time ,date and use id to get your job.
if you ran on frond end then you won't see job.if your job was completed then you can see data at SE11 by using setup table name or you can see at t code NPRT by using name of the run.
if you won't find your job then just delete your setup tables again and fill it.
No issues.
Thanks

Error while changing the Resource Object Status

Hi,
I am trying to change the resource object status from Waiting to Provisioned for a self service task. Before approval I see the Resource Object Status as " Ticket Sent To REMEDY" on the administrator's web console and at the Requestor's web console I get the following error message-
???en_US.global.viewProfileForm.Lookup.Ticket-Sent-to-REMEDY???
But after approval, based on the completion the task, the process on both the consoles is set to provisioned. That is what I want to display but the problem comes when the requestors sees the error status message on its console before approval.
Can any body tell me the reason of the above error and how to resolve it?
Thanks in advance

do you have any custom written event handlers getting triggered off after request submission or during approval?
It might also be due to either a browser issue or you might have missed any entry in the xladmin properties file for a custom label/error message etc.

Unable to release the Check-in status of a checked-out item.

Dear all,
I am using Portal 10.1.2 and now facing a problem that someone "A" has the privilege to add file items on a page where an approval process ("X", "Y", "Z", only one must approve) is defined.
"A" add a new file to the page. He did it as usual. Go to the page, add the new file and press OK.
But, neither "X", "Y" nor "Z" can see the pending file item shown in the "My Approval Status Portlet".
So, the uploaded file is now checked-out by A and no one can move it.
Can anyone help me?
thanks a lot.
George (HK)
My blog at http://hktour.blogspot.com

Thnx - the hint with the "My Notification" portlet did the trick.
I had a HTML Portlet, that always displayed "draft" - but every user already saw the new content (!?).
After putting a "My Notification" portlet on an extra page - I could access the page with the HTML portlet in mode 25 (preview pendiing items) were I could submit the portlet into approval. Using the "My Notification" portlet again, I was also able to approve the portlet.
Now all pages that included this portlet are cleaned again (no more displaying "darft" in the edit mode).
Thanks a lot!

How to find out the Accounting document status for sales order

Hi
We have created the sales document by referring the billing document of contract no.Aftre that we have raised invoice for sales document. Now system is generated both invoice , accounting document and the value is appearing against the invoice document. However the status against the accounting document is showing as not cleared. I want to know where we could see this status in Table,
Normally we can see the status in FPLT for contracts since its having the billing plan no. Suppose if the billing plan is not available like S.O , How to check the status in table?
I have refered so many tables but not helping. Since i want to get the uncleared value of accouting document.
Please help me.
Regards
Thenna

Hi Thenna
The accounting document status in the document flow is determined dynamically when you display the document flow,
it's not saved in a specific table.
Here is the relevant logic:
LV05CF01 -> form BUCHHALTUNGSBELEG
IF vbrk-vbeln <> vbfa_tab-vbeln.
   PERFORM vbrk_ermitteln USING vbfa_tab-vbeln.
   REFRESH xbkpf.
   CALL FUNCTION 'FI_DOCUMENT_READ'
    LOOP AT xbseg WHERE bukrs EQ xbkpf-bukrs
                  AND   belnr EQ xbkpf-belnr
                  AND   gjahr EQ xbkpf-gjahr
                  AND   ( koart EQ 'D' OR koart EQ 'K' ).
    ENDLOOP.
            IF NOT sy-subrc IS INITIAL.
SET STATUS TO 'No items are cleared'
              l_xdoc_num-status = 'A'. <<<
            ELSE.
              LOOP AT xbseg WHERE augbl IS initial
                            AND   umskz NE 'A'
                            AND   vorgn NE 'AZUM'
                            AND   ( koart EQ 'D' OR koart EQ 'K' ).
              ENDLOOP.
              IF NOT sy-subrc IS INITIAL.
Set status to 'All items are cleared'
                l_xdoc_num-status = 'C'. <<<
              ENDIF.
            ENDIF.
Regards,
Alex

Date on the basis of status

hello experts,
I have an issue related to the Report designing.
I have some fields to display into the report like Completion date, Status Value.
Now I want to display only those date where status is completed, how can i achieve this as i have some more fields so i cant restrict the Status field globally in the report.
i also tried to create the Formula var for both compl dt & status & used the If condition but the formula gives some junk val.
please advice the soln
thanks in advance
neha

thanks for the response..
i had created the condition on the basis of status = completed, but it hides all other records having other status.
actually , the completion date is basically the creation date
suppose...
on 20.04.2011 the status was open then creation date was 20.04.2011 and then on 25.04.2011 status is changed to completed.
but on the same date there is a record having status released.
I want the data like this
Object id     Status           date                  value
aa11            compl           25.04.2011           27
a15d             released                                  36

BSP: Use of dynpro services is not possible in the current system status

Hello,
in the component SRQM_INCIDENT_H i created a own button and eventhandler on the overview view.
Here in this eventhandler i´m calling an own method from an own class. This method is doing a RFC in our ERP system.
If i test the method this works fine.
If i call this method in my eventhandler i get BSP error:
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
Use of dynpro services is not possible in the current system status
Exception Class CX_SY_MESSAGE_IN_PLUGIN_MODE
Error Name
Program ZCL_CRM_CS_DATA_SERVICES======CP
Include ZCL_CRM_CS_DATA_SERVICES======CM001
ABAP Class ZCL_CRM_CS_DATA_SERVICES
Method CREATE_CS_ORDER
Line 54
Long text -
Error type: Exception
Any ideas?
thank you
Best regards

Hi,
Web-UI cannot handle MESSAGE statements. if it's your own program, you should use the web-ui( view_manager->get_message_container or cl_crm_bol_core's global message container) alternatives to display the messages. If the message statement is being issued by a standard program, it's most usually deliberate attempt to fail on unrecoverable error. You can catch it by usin the try...catch CX_SY_MESSAGE_IN_PLUGIN_MODE ..where you call the standard functions.
Regards,
Arun Prakash

CRM70 Use of dynpro services is not possible in the current system status

Hi all,
i programmed in Webclient UI an own button which calls a Method of a zclass. Within this method i do a remote function call in ERP.
I can test the method successfully but if i call it from CRM Webclient UI i have a BSP error:
Business Server Page (BSP) error
What happened?
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
Use of dynpro services is not possible in the current system status
Exception Class CX_SY_MESSAGE_IN_PLUGIN_MODE
Could one of you experts please give me a hind?
Thank you
Kind regards
Manfred

Solved,
there was a SAP GUI "MESSAGE" in the ERP function call which is not possible for CRM Webclient UI.
Kind regards
Manfred

Use of dynpro services is not possible in the current system status

Hi,
I am new to all of this and new to SAP. I will bew self learing my way into CRM SOA, working with the web service creaiton i keep getting the following errlr when rtying to Activate a new created web service:
"Use of dynpro services is not possible in the current system status"
not knowing the system that well i wonderin if there is missing configuration. This is CRM 7.0
Exception Class CX_SY_SEND_DYNPRO_NO_RECEIVER
Error Name DYNPRO_SEND_IN_BACKGROUND
Program SAPLSKEY
Include LSKEYU03
Line 33

Hi Keith,
Welcome to the SCN forums!
SAPLSKEY
You should first check your Abap dumps using tranaction code ST22, this usually provides more detail on the problem.
In this case I think it's trying to return a screen (or pop-up message) that can't be handled while activating the web service. The "SAPLSKEY" tells me that it might be licence related, do you have a valid developer's licence for Abap development work? If not apply for one (find out the procedure from other Abap developer's that you may work with) & check if that makes a difference while activating.
Regards, Trevor

Why does captivate 5 scorm 2004 change the pass/fail status when using complete/incomplete

SUMMARY: I am trying to use SCORM 2004 reporting but I am finding out ADOBE does not diffentiate between COMPLETE/INCOMPLETED and PASSED/FAILED variables in the SCORM 2004.
RESULT: I can not accurately get the passing/failing status from the course.
QUESTION: Is their anything I can do or does ADOBE have a patch they have release which will accurately report the passed/failed STATUS as well as the completed/incompleted status.
OTHER RESEARCH: I even attempted to post these "proofs" on scorm.com and they have something called "SATISFACTION TRACKED" to accomodate content creation systems (CAPTIVATE 5) which does not follow the standards of SCORM 2004.
BACKGROUND: the report status "Incomplete/Complete" and "Pass/Fail" under the publishing options for SCORM 2004 essentially mean the same thing when the CAPTIVATE COURSE sends setvar commands to the SCORM API... In other words the SCORM API receives the same exact commands when publishing in both modes. "THIS IS WRONG"
why is the wrong? IF REPORTING; incomplete/complete ; the CAPTIVATE 5 COURSE SHOULD NOT "change" the STATUS OF PASS/FAIL when attempting to report COMPLETE/INCOMLETE with 100% slide views.
DEMO #3> SHOWS THE PROBLEM
About DEMO #1 and DEMO #2> these are other reporting options I attempted with other problems arrising..so these images are just for supporting my original problem which is shown in DEMO #3...
DEMO 1 (REPORT STATUS has no affect on reporting):SETTINGS:
PASS: (PROBLEM)
Anything above Passing Score is not recorded to LMS (once passing is reached...no more bookmarks are recorded)
FAIL: (CORRECT)
Failure gets sent to the database on the last screen with "completed"
DEMO 2 (Report status [Complete/Incomplete Pass/Fail] has no impact on commands sent to scorm api):
SETTINGS:
PASS: (CORRECT)
Very Last page gets sent to the Database
FAIL: (PROBLEM)
NOTHING GETS SENT TO DATABASE (stuck in final score screen forever)...because it says "INCOMPLETE"
DEMO 3:
Report status [Complete/Incomplete Pass/Fail] has no impact on commands sent to scorm api
SETTINGS:
PASS: (CORRECT)
Very Last page gets sent to the Database with a 90% passing with "completed"
FAIL: (PROBLEM)
LAST SLIDE SENDS "completed" but GETS SENT AS A PASSING SCORE??? even when it is a failure
(IN OTHER WORDS ADOBE CHANGES THE PASS/FAIL STATUS based on slide views...
this is WRONG ....REALLY WRONG becuase I am trying to report
"COMPLETE/INCOMPLETE" for 100% slide views
PASS/FAIL OPTIONS:
OPTION I CAN PURSUE?
SO WHAT CAN I DO? YES, I CAN TELL THE LMS...to COMPARE THE SCORE RECEIVED DURING A "COMPLETE" status...and then change the grade in the LMS based on the SCORE IN THE LMS...BUT THAT WOULD MEAN THE LMS COULD REPORT ONE GRADE and the COURSE COULD REPORT A DIFFERENT GRADE....and that would not be good.
ALL OF OUR COURSES SHOW THE STUDENT THE FINAL SCORE WITHIN EACH COURSE..
QUESTION TO ADOBE?
SO ADOBE when are you going to differentiate these two reporting options so that the PASS/FAIL OPTIONS ARE ACCURATELY REPORTED WHEN USING COMPLETE/INCOMPLETE?
MORE INFORMATION
HERE IS THE SCORM.COM "Satisfaction" adjustment (very last line) to accomodate inconsistent reporting in CAPTIVATE 5.
Thanks,
DOUG LUBEY OF LOUISIANA
www.douglubey.com
OTHER WEBSITES:
http://forums.adobe.com/message/3332035
http://forums.adobe.com/message/3122315
http://forums.adobe.com/thread/712502?start=50&tstart=0
http://forums.adobe.com/thread/800570
http://forums.adobe.com/thread/720121
SEARCH ENGINE REFERENCE:
CAPTIVATE SCORM SUCCESS_STATUS
captivate 5 scorm 2004 pass/fail is dependent on complete/incomplete
scorm 2004 captivate cs5 success_status incorrect
scorm 2004 captivate cs5 reports success_status incorrectly
scorm 2004 captivate incorrectly reports pass/fail
scorm 2004 captivate 5 incorrectly reports pass/fail
scorm 2004 "captivate 5" incorrectly reports pass/fail
captivate 5 sends a pass even when a failure is issued by the course using scorm 2004.
captivate does not work properly when working with completed status.
CAPTIVATE SCORM SUCCESS_STATUS COMPLETE STATUS SHOULD BE INDEPENDENT
CAPTIvATE 5 cmi.completion_status
and cmi.success_status does not work independently with scorm 2004. they both share the same definition. These two field were designed to help differentiate the difference between a passing or failing score and when the course is actually completed. WITH CAPTIVATE 5 they do not differentiate the two. COMPLETE means PASS and INCOMPLETE means fail..
I was trying to use "completion_status" as a way to determine when all slides were shown. So that I can send the final score (PASS/FAIL) the LMS after all slides were viewed and this was the absoluted score the student recieved.
2011 CAPTIVATE CHANGES cmi.success_status TO PASSING WHEN COURSE REPORTS FAILURE
2010 CAPTIVATE CHANGES SUCCESS TO PASSED WHEN COURSE REPORTS FAILURE
CAPTIVATE 5 CHANGES cmi.success_status TO PASSING
CAPTIVATE 5 CHANGES cmi.success_status TO PASSING WHEN COURSE REPORTS FAILURE
CPTX CAPTIVATE CHANGES cmi.success_status TO PASSING
CP5 WHY DOES CAPTIVATE SCORM SUCCESS_STATUS
CPTX WHY DOES CAPTIVATE CHANGE PASSING STATUS
CPTX CAPTIVATE SCORM CHANGES FAILING SCORE TO PASSING SCORE
CAPTIVATE SCORM SUCCESS_STATUS COMPLETE STATUS MEANS THE SAME THING
CAPTIVATE SCORM SUCCESS_STATUS COMPLETE STATUS SHOULD BE INDEPENDENT

Hi,
Here's something I found in a similar situation... hope this helps!
After publishing your CP5 project as a SCORM 2004 zip file, unzip the file so you can get into the separate files. Open the imsmanifest.xml file with a text editor; I like using Notepad++. Search for the line starting with <imsss:minNormalizedMeasure>. The complete line will probably look like <imss:minNormalizedMeasure></imss:minNormalizedMeasure>, this is the line that is supposed to contain your passing score (at least for our LMS). So, if your passing score is supposed to be 80%, edit this line to be: <imsss:minNormalizedMeasure>0.80</imsss:minNormalizedMeasure> and save the file. Then select all the files and re-zip them, I use 7-zip for that.
I found one other weird thing that doesn't happen 100% of the time, so test it. In the example above, try to get a score of exactly 80% (or whatever passing grade you are using) and see if you get the correct status reported. I found I sometimes have to re-edit that line in the manifest file to be 0.79 so it correctly includes an exact 80% score. No idea why and you have to watch the number of questions in your quiz to make sure that works for you mathematically.
If this works or not, I'd recommend posting your results so others can get some ideas. Good Luck!!

Revoke the Status NCMP status in a PM order

Similar Messages

Maybe you are looking for