Date on the basis of status

hello experts,
I have an issue related to the Report designing.
I have some fields to display into the report like Completion date, Status Value.
Now I want to display only those date where status is completed, how can i achieve this as i have some more fields so i cant restrict the Status field globally in the report.
i also tried to create the Formula var for both compl dt & status & used the If condition but the formula gives some junk val.
please advice the soln
thanks in advance
neha

thanks for the response..
i had created the condition on the basis of status = completed, but it hides all other records having other status.
actually , the completion date is basically the creation date
suppose...
on 20.04.2011 the status was open then creation date was 20.04.2011 and then on 25.04.2011 status is changed to completed.
but on the same date there is a record having status released.
I want the data like this
Object id     Status           date                  value
aa11            compl           25.04.2011           27
a15d             released                                  36

Similar Messages

To fetch data on the basis of last program run date and time

Hi all,
My query is as folows:
I am selecting BOM components from STPO table on the basis of some criteria.
My requirement is to select only BOM components which are newly added or created after last program run,i.e. STPO-AEDAT and STPO-ANDAT are greater than last program run.Here i fetched last program date from customised structure(client specific) which has date field also,and compared with aedat and andat in STPO records.But how can I connect it with last run time as there is no such time field in STPO table.I need to fetch this data on the basis of last program run(time+date).
Please help me..it's crucial,
Thanks in advance,
Meena

Hi,
We had a very similar requirement.
We developed a custom-solution for this.
Create a Z-Table and update it with your progname, date and time.
Whenever the BOM was changed, it generated a change number ( this has to be done by the user)
You can get the date and time from the change Number Table AENR and compare it with the timestamp in Z-TABLE
Hope it helps,
RJ

FM to find week start and end date on the basis of a given date

Hi Everyone,
I have a requirement in which I require the week start and end date of any given date.
For eg: The given date is Wednesday 24.03.2010, I need a function module to calculate the week start date ie. Monday 22.03.2010 and week end date ie. Sunday 28.03.2010 on the basis of that date.
Any input to this query would be helpful.
Thanks,
Nimisha Agarwal
Edited by: Nimisha Agarwal on Jul 7, 2010 7:47 AM

HI nimisha,
many posts r there for this .
Kindly check before posting
anyways this FM will serve u r purpose.
GET_WEEK_INFO_BASED_ON_DATE

How to use Callout in B2B on the basis of STATUS

Hi,
If there occurs a validation error in the B2B EDI contents, what mechanism can be used to update that status back to the source system?
We are using B2B Adapter in the BPEL Process to pass the XML file and B2B generates an EDI file for us. Now, if there are any validation errors due to which the EDI file doesn't get generated. What mechanism in B2B I can use to take that status and message and respond back to the caller?
Have heard about "Callout" in B2B, can we use it? If yes, then how?
Thanks
Priyanka

Hi Priyanka,
Let me see if I understood. You want to be able to do some specific processing after an EDI message has an error when sending the message but also when the message is sent properly. Correct?
For the first case: When an EDI message has an error when sending:
you can use what I described earlier and set an exception queue. You will then receive all exceptions on a back-end SOA process and can apply your specific processing there.
For the second case: When an EDI message is sent properly, you can perhaps use one of these 2 options:
Using the B2B BAM connection for communicating to the back-end. Set the BAM to true under Administration -> Configuration. You need then to configure a JMS queue linked to the Remote JNDI AQ of B2B_BAM_QUEUE. Then, you can read from this JMS on your composite level and filter for the messages that you desire and continue your process from there.
Use the FA for the Agreement. This should force that an ACK message is sent back to your B2B if message is properly delivered. Upon receiving this message you can then process it to your back-end application and once again apply your specific processing there.
I hope this helps.
Cheers
Tiago

How to display data on the bases of master plan in Quality Results

Dear,
I have been woking on quality results to insert data through interface in child view(Q_COTTON_TEST_CHILD_IV) which is auto generated view as built-in functionality. Master quality plan has been inserted from fron-end while child data inserted throught interface & fron end as well. In quality module, when select child plan and call detail but don't appeare data which inserted through interface table while manual entry of chile record is being displayed,
Still, i have coufused that how can we make relation between parent & chile record while inserting data through interface table.
Kindly please advice to get this.
thnks...

Dear,
I have been woking on quality results to insert data through interface in child view(Q_COTTON_TEST_CHILD_IV) which is auto generated view as built-in functionality. Master quality plan has been inserted from fron-end while child data inserted throught interface & fron end as well. In quality module, when select child plan and call detail but don't appeare data which inserted through interface table while manual entry of chile record is being displayed,
Still, i have coufused that how can we make relation between parent & chile record while inserting data through interface table.
Kindly please advice to get this.
thnks...

Changing the report displayed on the basis of value selected frm the prompt

Hi,
I have requirement in which there is dashboard prompt which has three columns namely year, month and report name.
The user will select the report name from the prompt, once done the report that has been selected should show up
on the dashboard page and he should be able to select data on the basis of month and year from it.
Also, if the user wants to go to the other report he should be able to select it from the prompt and view it.
Pls shed some light on how to progress about it. As of now think if something like this is possible then it would definitley
need two prompts one for report name and the other for month and year.
Thx :)

Hi Kishore,
When i click on the link given by you it takes me to a page where a link is given with text as under
Oracle BI 10.1.3.3/2 - Selecting Reports from Dashboard Prompts and Guided Navigation Sections
And when i click on this nothing opens up.
Thx
Edited by: Phantasm on Jun 22, 2010 3:05 AM

Data acquisition on the basis of time

Hi everyone,
I want to acquire the radial run-out (radial small displacement) of a rotating spindle using a capacitive sensor. To do so I will use the LabView v. 7.1. The PCI-6036E card from National Instruments (NI) will be utilized for data acquisition. The spindle turns at 100 rpm and a rotational incremental encoder is fixed at rear of spindle. This encoder provides an index digital pulse per revolution. This pulse should be used to start and finish the sampling process. I want to sample on the basis of time, by means of sampling rate of the card (Ksamples/s). So, let us suppose that I want to acquire 500 data/rev. The spindle takes 0.6 sec to complete one revolution. Thus, the required sampling rate is Fs = 500 samples/0.6 s = 833 samples/s. So, I should set the VI in LabView so that it samples only 833 data/s. Therefore, I will have to reduce the sampling rate of the analog-input channels in use. For example, let us suppose that the card provides 100 Ks/s when operating in multiple channels. Let us admit that there are 4 analog-input channels in use. So, the scan rate per channel is 25 Ks/s. This is too much for this application. I only need 833 samples/s. So, I should program the VI so that the card provides that required sample rate. As said earlier, I need to start and end the sampling process at the same point. Thus, to do that the index pulse of the encoder will be used. Also, I want to sample during 5 consecutive revolutions of the spindle. So, by means of a loop in VI, I should count the index pulse of encoder until the number of pulses be equal to 5 (= number of revolutions). At this instant, the sampling process should be stopped. Note: 1) the sampled data should be put in a buffer. After the sampling process is finished, this data should be saved in a file of LabView; 2) In fact, the data acquired by the sensor are voltage analog input. Questions:1) Could you make a VI for this problem, please? Note: you can use the DAQ ASSISTANT EXPRESS VI or DAQmx TASK NAME CONTROL method2) What should I do to stop the data acquisition at the end of 5 revolutions using the index pulse of encoder?3) Could you send examples (VIs) similar to my problem above? In anticipation, thank you very much for any help. My e-mail: [email protected]
Bruce

duplicate post
Continue in other thread
Message Edited by smercurio_fc on 11-14-2008 09:10 AM

Particular data in a report, on the basis of the values (0, 1) of a dashboa

hi
User should be able to see the particular data in a report, on the basis of the values (0, 1) of a dashboard prompt.
For e.g. if the user selects 0 then current years data should be filtered out
and if the user selects 1 then rest all years data should be displayed in a request.
give me hint regarding this question

Hi,
I hope this will help you
http://oraclebizint.wordpress.com/2008/01/17/oracle-bi-101332-selecting-reports-from-dashboard-prompts-and-guided-navigation-sections/
In this example he used prompt for selecting Region sales and Brand sales which you can replace with 0 and 1
Phani.

Data Not loaded from ap_invoice_lines_interface to the base table

Hi ,
Please I'm working on Interface which load invoices from Cobol system to oracle , anyway procedure is working on fine & all data is loaded to the interface as i'm inserting 4 attributes which is DFF on the invoice line level
Now when i ran the import program all data is loaded to the base table except one of the attributes isnot loaded .
will anyone tell me what is the reason or how can i trace that ..........
Thanks In Advance

Dear All ,,,,
Please i got it's a matter of size of the attribute1 segment i increased it ,,,,,,,,,but now the issue that data is saved in the base table but not showing in the screen
will you please help me in that
Edited by: miro_feps on May 21, 2012 1:01 AM

Updating of QM info structures on the basis of inspection lot creation date

Dear Gurus,
Our business requirement is as follow:
Suppose MM has received 10 consignment of a material (Goods receipt) against a material in month of Feb-2008 from a particular vendor.
Inspection lot statistics in MCXA is updated on the basis of inspection lot generation, which is as per our requirement.
Suppose this inspection take 2 days for analysis at laboratory.
Now FI has to make payments for the month of Feb-2008 against this inspection results. They need the value of average quality parameter for the month of Feb-2008. (Average value of all quality parameter for the material of all the inspection lot which are generated in Feb-2008)
I want that QMIS should update on the basis of Inspection Lot creation date not on the basis of result recording system date.
I think there should be some configuration settings available for this purpose.
Please help me out.
Regards
Honyal

Any valuable input are welcome
regards
Honyal

What is setting for the depreciation calculate on the basis of assets value date

Hi ,
My client requirement to calculate the assets depreciation on the basis of assets value date,
every assets transaction will have take base assets value date
Acquision 1 Assets value date 1.4.2014
transfer Assets value date 15.3.2014
Wbs settlement Assets value date 20 .3.2014
second acquisition Assets value date 28.03.2014
if anybody know about the setting ,Please provide me important setting ,

Any setting related to assets posting variant ? to calculate if anybody know the setting please inform.

Block Order TECO on the basis of operation User Status

Hi Experts,
I am trying to restrict the TECO of maintenance order on the basis of order operation status. I have configured the user status profile and assigned it to order operation. This user status profile have two statuses, INCL - Incomplete and another is CMPL - Complete. I have prohibited the TECO for user status INCL. But when I create an order and try to TECO, the system allows me TECO it enenif the operation user status is INCL.
Could you Pl. tell me, have I missed something in configuration?

Dattatraya,
Actually you can control TECO by completion confirmation of order operation as PCNF ( partial confirmation) for operation which you have mentioned in Order. So you can set up in configuration like allow TECO only once CNF ( Full confirmation ) for all operations mentioned in Order.
For your mentioned scenario , I dont feel based on user status you can stop the TECO, anyway you can check with other experts as well.
Riyaj

Authorisation control for master data creation on the basis of eq. category

Hi Experts,
In one of my business scenerio , I want to control the authorisation of a particular person on the basis of equipment category. I want to create a role for that particular ID and assign that equipment category sothat he can not create the equipments other than that category.
How can I control this authorisation on object level basis? If any other way , please let me know sothat i can try out for the same.
With Regards
VT

Hi
You can use SPRO>PM and CS>Tech objects>equipment>Defien field selection for eqmt master record. Chose 2nd activity in list and click 'influencing' and select Equipment catiegory. Through this for a equipment category, you can control fields as input, required, display, hide. Maintain the field auth group as required for a equipment category you want to control.
You can create auth group in SPRO same path as above under techincal objects, general data. Check with GRC/basis team to limit auth to Equipment category for this group. If not, you can do this through ABAP for validating the auth group for equipment category. Assign this Auth group to a role
Regards
Hemanth

Data type of the base attribute or the base value does not match...

...the assigned expression.
Hello all,
I always get the Error
+<ERROR+
TEXT="'DWH.CUB_REGISTRATIONS_AW.REGISTRATIONS': XOQ-02517: Der Datentyp des Basisattributs oder der Basisgröße stimmt nicht mit dem zugeordneten Ausdruck überein.
XOQ-01400: Ungültige Metadatenobjekte"/>
The English message must be something like this:
The data type of the base attribute or the base value does not match the assigned expression.
when I run my mapping. The attribute REGISTRATIONS is NUMERIC (12,2) in the Cube and I map a NUMERIC(12,2) constant in it.
I use a simple OWB-Mapping for loading, but I don't understand why it doesn't function. Other mappings where the attributes are out of a
table I put in a cube are running well.
I tried different things, but nothing fixed my problem. Any idea ?
Thanks a lot for help
Michael

Technically this is a 'warning' from the server, not an 'error'. This means that the change you made should have been submitted, but you get an warning message on the client. AWM would suppress this warning, but evidently OWB does not. Can you switch to use AWM?
Here is the definition of the warning along with 'cause' and 'action' sections. (Unfortunately these sections are not translated into German for some reason.)
>
02517, 0, "The data type \"%(1)s\" of the base attribute or base measure is different from the mapped expression \"%(2)s\"."
// *Cause: Either the base attribute or base measure with the mapped expression was set to an inconsistent data type, or it was mapped to an expression of a different data type from its fixed data type.
// *Action: When changing a mapped expression for a base attribute or base measure, ensure that the expression has the same data type; otherwise, set the data type of the base attribute or base measure to NULL first. When a base attribute or a base measure has an existing mapped expression, do not set it to a different data type.
>
It is probably safe to ignore this warning, but if you can post the relevant XML for the cube, then will probably be able to spot the problem. I assume that REGISTRATIONS is a measure in the cube CUB_REGISTRATIONS_AW, so this is what you can look for in the XML:
(1) The definition of the base measure along with the datatype. It should be something like this
<Measure>
<BaseMeasure
    SQLDataType="NUMBER(12,2)"
    ETMeasureColumnName="REGISTRATIONS"
    Name="REGISTRATIONS">(2) The mapping info for the measure, which should looks something like this:
<MeasureMap
Name="REGISTRATIONS"
Expression="...">
<Measure Name="REGISTRATIONS"/>
</MeasureMap>I don't know if you can get the XML directly from OWB. If not, then DBMS_CUBE.EXPORT_XML should work (assuming you are in 11.2). You could also attach AWM and save the cube to an XML template.

Exchange rate coefficient on the basis of latest posting date in invoice.

Hi,
I have one query on posting date(picking of exchange rate coefficient from TCURR table) in invoice verification. Please help.
Conditions are--
vender and company code are not in same currencies(ex-USD and INR). exchange currencies are maintained perfectly on every month 1st ie co-efficients in TCURR table ie OB08
Query---
1.At the time of parking invoice suppose i enter the date 20th august and i have posted that invoice as parking. It is converting the local currency as per 8th month exchange rate.
2.And at the time of final posting the invoice supose i posted that date as 10th September. Business wanted that converting the local currency as per 9th month exchange rate But now local currency is converting on the basis of initial entry of posting date ie 8th month only.
Please advise and guide what configeration that i have to set for picking the exchange rate coefficient on the basis of latest posting date in invoice verification.
Thanks & Regards,
MadhuBabu.

Hi
I dont think it is possible as once you enter posting date while in parking invoice screen, on that date exchange rate will be calculated and it wil not be different at time of posting invoice. Instead of parking, you have to directly post with current posting period.
Thanks

Date on the basis of status

Similar Messages

Maybe you are looking for