RFC not getting data from XI
hi,
in my scenario, XI is passing the data back to RFC, but in my program where i call the RFC, the data is not received. what could be the issue.
CALL FUNCTION 'ZFFF' DESTINATION 'XI'
TABLES
INP = aaa
OUT1 = bbb
OUT2 = ccc.
COMMIT WORK.
it was working fine before when i had only OUT1. Later I added OUT2 and then onwards I am not getting data for any of the tables. I have checked in XI, data is being passed out of XI to RFC. No issues in that.
something seems to have gone wrong in the RFC modfication or the RFC call. can anyone please help.
thks
Hi,
Check the export import parameter declarations & data types in both RFC & XI.
Put a break point in RFC & check whether it is getting triggered.
Best regards,
Prashant
Similar Messages
-
How to use RFC to get data from BW?
Hi all, we need to get data from BW using RFC, I am not familiar with BW and RFC, would you please give me some advice? Many thanks in advance!
would you please bring your solution to light here?
thank you
God's blessing
Andreas -
Can not get data from database
hi all,
there is a problem , when i write like below :
SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
WHERE bukrs = p_bukrs
AND hkont = p_hkont.
p_bukrs , p_hkont are all on the selection screen , and p_bukrs = 1200 another is eq blank. i can not find any data , but with the same condition i can find some data in database , when i debeg i found that p_hkont is initial.
when i write like this :
SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
WHERE bukrs = p_bukrs .
this time i can find the data like the database.
so , does someone know where the problem is , why i can not get data ?
kind regards
kevinhi,
if u r using bukrs and hkont as parameters in selection screen then
SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
WHERE bukrs = p_bukrs
AND hkont = p_hkont.
this will work.
if u r using then as select-option then the above does n't work.
bcoz select-options work as internal table bcoz of that u have use the query like this
SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
WHERE bukrs IN p_bukrs
AND hkont IN p_hkont.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Edited by: Alvaro Tejada Galindo on Aug 15, 2008 5:25 PM -
I prepared a GUI user connection application in NebBeans 5.5 accessing mySql database in the company server. The application run very well in desktop.
However, when I post it to the company server web, it gets nothing from the database.
Can any one give advice???
Thank you in advance.
The following is my application
import java.util.Vector;
import java.awt.event.*;
import java.awt.*;
import java.awt.event.*;
public class UserConnection extends javax.swing.JFrame {
//constants for database
private final String userName = "labmanage";
private final String password = "labmanage";
private final String server = "jdbc:mysql://svr.corp.com/labmanage";
private final String driver = "com.mysql.jdbc.Driver";
private JDBCAdapter data = new JDBCAdapter(server, driver, userName, password);
//variables
private String user, pwd;
private Vector<Vector<String>> userTable = new Vector<Vector<String>>();
private Vector<String>colUserNames = new Vector<String>();
* Creates new form UserConnection
public UserConnection() {
initComponents();
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
// <editor-fold defaultstate="collapsed" desc=" Generated Code ">
private void initComponents() {
userLabel = new javax.swing.JLabel();
pwdLabel = new javax.swing.JLabel();
userTextField = new javax.swing.JTextField();
passwordField = new javax.swing.JPasswordField();
submitButton = new javax.swing.JButton();
statusLabel = new javax.swing.JLabel();
jScrollPane1 = new javax.swing.JScrollPane();
statusTextArea = new javax.swing.JTextArea();
changePwdButton = new javax.swing.JButton();
setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
setTitle("User's Connection");
setBackground(new java.awt.Color(153, 204, 255));
setCursor(new java.awt.Cursor(java.awt.Cursor.DEFAULT_CURSOR));
setFont(new java.awt.Font("aakar", 1, 12));
userLabel.setText("User Name:");
pwdLabel.setText("Password:");
submitButton.setText("Submit");
submitButton.addMouseListener(new java.awt.event.MouseAdapter() {
public void mouseClicked(java.awt.event.MouseEvent evt) {
submitButtonMouseClicked(evt);
submitButton.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
submitButtonActionPerformed(evt);
submitButton.addKeyListener(new java.awt.event.KeyAdapter() {
public void keyTyped(java.awt.event.KeyEvent evt) {
submitButtonKeyTyped(evt);
statusLabel.setText("Status:");
statusTextArea.setColumns(20);
statusTextArea.setEditable(false);
statusTextArea.setLineWrap(true);
statusTextArea.setRows(3);
statusTextArea.setText("Initial assigned password is \"dime\".");
statusTextArea.setWrapStyleWord(true);
jScrollPane1.setViewportView(statusTextArea);
changePwdButton.setText("Change password");
changePwdButton.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
changePwdButtonActionPerformed(evt);
org.jdesktop.layout.GroupLayout layout = new org.jdesktop.layout.GroupLayout(getContentPane());
getContentPane().setLayout(layout);
layout.setHorizontalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.addContainerGap()
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(userLabel)
.add(pwdLabel)
.add(statusLabel))
.add(35, 35, 35)
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.add(submitButton)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(changePwdButton))
.add(passwordField, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 230, Short.MAX_VALUE)
.add(userTextField, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 230, Short.MAX_VALUE)
.add(org.jdesktop.layout.GroupLayout.TRAILING, jScrollPane1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 230, Short.MAX_VALUE))
.addContainerGap())
layout.setVerticalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.addContainerGap()
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(userLabel)
.add(userTextField, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(pwdLabel)
.add(passwordField, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(statusLabel)
.add(jScrollPane1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.add(15, 15, 15)
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(submitButton)
.add(changePwdButton))
.addContainerGap(27, Short.MAX_VALUE))
pack();
}// </editor-fold>
private void submitButtonKeyTyped(java.awt.event.KeyEvent evt) {
if(evt.getKeyCode() == KeyEvent.VK_ENTER) {
submitButton.doClick();
submitButton.requestFocus();
changePwdButton.requestFocus();
private void changePwdButtonActionPerformed(java.awt.event.ActionEvent evt) {
String command = evt.getActionCommand();
if(command.equals("Change password")) {
passwordField.setText("");
//Get connection to the changing password panel
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
new ChangePassword().setVisible(true);
private void submitButtonActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
String command = evt.getActionCommand();
if(command.equals("Submit")) {
user = getUser();
pwd = getPwd();
data = new JDBCAdapter(server, driver, userName, password);
data.executeQuery("SELECT * FROM USERTABLE");
colUserNames = data.getColumnNames();
userTable = data.getDataTable();
if(colUserNames.elementAt(0).equals("")) {
statusTextArea.setText("Can not connect to database");
boolean checkUser = false;
int i = 0;
while(!checkUser && i<userTable.size()) {
if(user.equalsIgnoreCase((String) userTable.elementAt(i).elementAt(0))) {
//Find the user in database
checkUser = true;
//Check user's password
if(pwd.equals((String)userTable.elementAt(i).elementAt(1))) {
//Check for initial default password. The user is requested
//to change his password
if(pwd.equals((String) "dime")) {
statusTextArea.setText("You are requested to change your " +
"initial assigned password. Click 'Change password' please.");
else {
//Set UserConnection Panel to invisible
setVisible(false);
dispose();
//Get connection to the table
if(userTable.elementAt(i).elementAt(2).equals("0")) {
//Get connection to non-editable table
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
PVRackReportNonEdit rackReport = new PVRackReportNonEdit();
rackReport.createAndShowDialog();
else {
if(userTable.elementAt(i).elementAt(2).equals("1")) {
//Get connection to editable table
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
PVRackReport rackReport = new PVRackReport(user);
rackReport.createAndShowDialog();
//PVRackReport rackReport = new PVRackReport();
else statusTextArea.setText("You do not get approval for viewing data. " +
"Please contact the administrator for details.");
else {
passwordField.setText("");
statusTextArea.setText("Please enter corrected password or" +
"the administrator for details.");
i++;
if(!checkUser) {
passwordField.setText("");
statusTextArea.setText("Not find such user's name." +
"contact the admistrator for details.");
private void submitButtonMouseClicked(java.awt.event.MouseEvent evt) {
// TODO add your handling code here:
* @param args the command line arguments
public static void main(String args[]) {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
new UserConnection().setVisible(true);
public String getUser() {
return userTextField.getText();
public String getPwd() {
return passwordField.getText();
// Variables declaration - do not modify
private javax.swing.JButton changePwdButton;
private javax.swing.JScrollPane jScrollPane1;
private javax.swing.JPasswordField passwordField;
private javax.swing.JLabel pwdLabel;
private javax.swing.JLabel statusLabel;
private javax.swing.JTextArea statusTextArea;
private javax.swing.JButton submitButton;
private javax.swing.JLabel userLabel;
private javax.swing.JTextField userTextField;
// End of variables declaration
Here is my JDBCAdapter
package rackdemo2;
* This is an adaptor which transforms the JDBC interface
* to the PVRackTableDialogue
import java.util.Vector;
import java.sql.*;
import javax.swing.table.AbstractTableModel;
import javax.swing.event.TableModelEvent;
public class JDBCAdapter {
Connection connection;
Statement statement;
ResultSet resultSet;
Vector<String> columnNames = new Vector<String>();
Vector<Vector<String>> rows = new Vector<Vector<String>>();
ResultSetMetaData metaData;
public JDBCAdapter(String url, String driverName,
String user, String passwd) {
try {
Class.forName(driverName);
connection = DriverManager.getConnection(url, user, passwd);
statement = connection.createStatement();
catch (ClassNotFoundException ex) {
System.err.println("Cannot find the database driver classes.");
System.err.println(ex);
catch (SQLException ex) {
System.err.println("Cannot connect to this database.");
System.err.println(ex);
public void executeQuery(String query) {
if (connection == null || statement == null) {
System.err.println("There is no database to execute the query.");
return;
try {
resultSet = statement.executeQuery(query);
metaData = resultSet.getMetaData();
int numberOfColumns = metaData.getColumnCount();
// Get the column names and cache them.
// Then we can close the connection.
for(int column = 0; column < numberOfColumns; column++) {
columnNames.addElement(metaData.getColumnLabel(column+1));
// Get all rows.
while (resultSet.next()) {
Vector<String> newRow = new Vector<String>();
for (int i = 1; i <= columnNames.size(); i++) {
String tempString = resultSet.getString(i);
if(!tempString.equals("null")) {
newRow.addElement(tempString);
else {
newRow.addElement("");
rows.addElement(newRow);
//Modify dataTable to add empty row to separate chassis
if(numberOfColumns>1) {
int nRow = rows.size();
Vector<String> row = new Vector<String>();
for(int i=0; i<numberOfColumns; i++){
row.add("");
if(nRow>0 || numberOfColumns>0) {
//Adding blank row to separate chassis
int i = 0;
while(i<nRow) {
if(!rows.elementAt(i).elementAt(0).equals("")) {
if(i>0) {
rows.add(i, row);
i++;
nRow = rows.size();
i++;
close();
catch (SQLException ex) {
System.err.println(ex);
public void close() throws SQLException {
resultSet.close();
statement.close();
connection.close();
// MetaData
public Vector<String> getColumnNames() {
return columnNames;
public Vector<Vector<String>> getDataTable() {
return rows;
public int getColumnCount() {
return columnNames.size();
// Data methods
public int getRowCount() {
return rows.size();
}Thank you for your answer.
I'm very new to mySql as server. When I was assigned
to write the application, the administrator has set
up mySql database in the company web server for my
application. My program runs very when using my
workplace desktop with java web start or with java
web start in netbeans (all paths should be link to my
desktop hard disk, i.e. users/application/). I can
not run the application at home because I can not
access to the company intranet server (for security
purpose). The problem happens when I post the
application in the company web page (I have to modify
all paths in jnlp file to the company web address).
The program then runs without exception except it
seems that it gets no data from the database (for
example, when I type my username, it returns that
"There is no such user name. contact.." as what I
code in the application for not correcting user name)
It happens for not only using my company desktop but
also for others.
Please help me.
Thank you in advance.And all this could have been answered yesterday, in your other thread, when I asked you "Is the DB configured to allow that user to connect to the DB from where that user is attempting to connect from?"
Seeing as how you get that error, the obvious answer was, "No." At which point we could have continued.
Configure the needed users into the DB, without forgetting to allow them access from the machines from which they are going to access from.
Although, I agree with Rene, that you should set up a server of some sort, located on the same machine as the DB, for communicating with the DB. -
Report is not getting data from Remote cube thru Multi Provider
Hi SAPians
I ve strucked up with a Problem in The Reconciliation Report in BW3.5
The Report was built on a Multi Provider, which was created on Basic and Remote Cubes .
Both cubes have same Data Source and all the Objects were in Active version and found good.
When I m executing the Report ,I m only getting the data from the Basic cube and no data is coming from Remote Cube.
I ve checked the char " 0Infoprov " in Multi Provider and It was assigned with the both the cubes.
What might be the problem
Please help me in this regard
Thanks in advance
Regards
ArjunHi
In the Reconciliation multiprovider, include 0INFOPROVIDER = Remote cube.
If data still not coming, you can be sure connectivity with Source system of the Remote cube is the issue
Check with basis to solve the connectivity issue.
Ensure Remote cube is consistent
Bye -
How to make this function module as RFC to get data from different system?
Hi
I am trying to use following function module . This function module is used to copy data from one cube to another cube within same system however I need a this should happen across two different system. How can I use this function module to make it remote call to different system and do the same function what it is doing ?
Name of function module -
RSDRT_INFOCUBE_DATA_COPY
Any help would be really helpful
AGHI,
let us say you want to copy the data of a cube in system A to a cube in system B .
1) create a RFC function module in system B (in this function module call the function module RSDRI_CUBE_WRITE_PACKAGE to update the data), this RFC function module should have same parametersa as RSDRI_CUBE_WRITE_PACKAGE .
2) write a program in system A .. read the data from the infocube using the function module RSDRI_INFOPROV_READ and call the RFC function module in system B that you have created..
for the details of the parameters to pass to these two function modules use the RSDRT_INFOCUBE_DATA_COPY and get the required code
Thanks
mahesh -
Not getting data from newly created dashboards
Hi,
I have created new Dashboard like "Server Health Status" not getting any data, whatever i have created earlier dashboards all getting data without any issue but if i create the same new dashboard im getting any data, please find the below error,
Can you please help me n this issue anyone. I'm Using SCOM 2012 SP1 with SQL Server 2008 R2.
Microsoft.EnterpriseManagement.Presentation.DataAccess.DataAccessDataNotFoundException: Exception reading objects ---> Microsoft.EnterpriseManagement.Common.UnknownDatabaseException: The query processor ran out of internal resources and could not produce
a query plan. This is a rare event and only expected for extremely complex queries or queries that reference a very large number of tables or partitions. Please simplify the query. If you believe you have received this message in error, contact Customer Support
Services for more information.
at Microsoft.EnterpriseManagement.Common.Internal.ServiceProxy.HandleFault(String methodName, Message message)
at Microsoft.EnterpriseManagement.Common.Internal.EntityObjectsServiceProxy.GetRelatedManagedEntitiesByManagedEntityTypesAndCriteriaWithInstanceQueryOptions(IList`1 parentManagedEntityIds, Boolean recurse, IList`1 managedEntityTypeIds, IList`1
managedEntityBaseTypeIds, IList`1 criterias, String languageCode, InstanceQueryOptions instanceQueryOptions)
at Microsoft.EnterpriseManagement.InstancesManagement.GetRelatedObjectsInternal[T](ICollection`1 instanceIds, ICollection`1 criteriaCollection, TraversalDepth traversalDepth, ObjectQueryOptions queryOptions)
at Microsoft.EnterpriseManagement.Management.DataProviders.ManagedEntityProvider.GetContainedManagedEntities(IDataObjectCollection targetEntities, ICollection`1 recursionTypeNames, ICollection`1 baseTypeNames, String criteriaString, List`1 valueDefinitions,
List`1 sortValueDefinitions, String typePropertyName, String typeWithIconPropertyName, Boolean propertyCollectionRequested)
--- End of inner exception stack trace ---
at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethodInvoker.Invoke()
at Microsoft.EnterpriseManagement.Monitoring.DataProviders.RetryCommandExecutionStrategy.Invoke(IDataProviderCommandMethodInvoker invoker)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethod.Invoke(CoreDataGateway gateWay, DataCommand command)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.ExecuteInternal[TResult](DataCommand command)
at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.<ExecuteAsync>b__0[TResult](<>f__AnonymousType0`1 data)
Thanks
Raja R
Raja RHi,
Please try the Update Rollup 2 for System Center 2012 Service Pack 1
http://support.microsoft.com/kb/2802159
It fixes the issue “Query processor runs out of internal resources and cannot produce a query plan when you open Dashboard views”.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Can not get data from actionscript db operation class?
DBOperation.as:
import flash.events.*;
import flash.net.NetConnection;
import flash.net.ObjectEncoding;
import flash.net.Responder;
import mx.collections.ArrayCollection;
import mx.controls.List;
import mx.rpc.events.ResultEvent;
import mx.collections.ArrayCollection;
public class DBOperation
private var nc:NetConnection;
private var responder:Responder;
public var list:ArrayCollection;
public function DBOperation():void{
nc = new NetConnection();
nc.objectEncoding = ObjectEncoding.AMF0;
nc.connect("rtmp://localhost/ins");
public function getSolutionData(sql:String):Boolean
responder=new Responder(getSolutionList,null);
nc.call
("dbo.getSolutionData",responder,sql);
return true;
public function getSolutionList
(solution:Object):void{
var solutionList:Array = new Array();
for(var items:String in solution)
solutionList.push
({label:items,title:solution[items].title,owner:solution
[items].owner,submitTime:solution[items].submitTime,image:solution
[items].image,imgInstruction:solution[items].imgInstruction});
list = new ArrayCollection(solutionList);
datagrid.mxml:
<mx:Script>
<![CDATA[
import DBOperation;
import mx.collections.ArrayCollection;
[Bindable]
private var solutionList:ArrayCollection;
private function initDG():void{
var dbo:DBOperation=new
DBOperation();
dbo.getSolutionData("some sql
strings");
solutionList=dbo.list;
]]>
</mx:Script>
my problem is I can get the data using DBOperation class,but
I can not
assign it to solutionList by "solutionList=dbo.list;"
The debug information says dbo.list=null, however inside
DBOperation
the "list" is full of data.
What's wrong with it??
Thanks!hi,
if u r using bukrs and hkont as parameters in selection screen then
SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
WHERE bukrs = p_bukrs
AND hkont = p_hkont.
this will work.
if u r using then as select-option then the above does n't work.
bcoz select-options work as internal table bcoz of that u have use the query like this
SELECT * FROM bsis INTO CORRESPONDING FIELDS OF TABLE it_temp
WHERE bukrs IN p_bukrs
AND hkont IN p_hkont.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Edited by: Alvaro Tejada Galindo on Aug 15, 2008 5:25 PM -
Not getting data from Essbase in Answers...
Hi there
Been somewhat mystified by this problem. We have several Essbases which we would like to use i OBIEE. The metadata is imported into a RPD and made available in Answers. When making a report and trying to run, it says that the query generated no results. Ive checked, double and triple checked that were I look for data, there actually is data. Ive been checking with Essbase and the data is there.
The funny thing is, that when I test on the Essbase DEMO database, and can see data fine, and drill about.
The only thing I can find is in the the logfile, where it gives me the following error. The error message below here is the one that makes the most sense...
"Failed to initialize SharedServices security instance. Component for SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Check EPM System Registry configuration."
at com.hyperion.hit.registry.Registry.getConnection(Registry.java:178)
at com.hyperion.hit.registry.Registry.lookupComponentsWithException(Registry.java:1316)
at com.hyperion.hit.registry.Registry.lookupWithException(Registry.java:517)
at com.hyperion.hit.registry.Registry.lookup(Registry.java:593)
at com.hyperion.css.registry.RegistryManager.<init>(RegistryManager.java:99)
at com.hyperion.css.registry.RegistryManager.getInstance(RegistryManager.java:124)
at com.hyperion.css.CSSSystemFactory.getCSSMode(CSSSystemFactory.java:100)
at com.hyperion.css.CSSSystemFactory.getCSSSystem(CSSSystemFactory.java:69)
at com.hyperion.css.CSSSystem.initCSSSystem(CSSSystem.java:290)
at com.hyperion.css.CSSSystem.getInstance(CSSSystem.java:251)
at oracle.bi.security.token.epm.CSSHelper.<init>(CSSHelper.java:37)
at oracle.bi.security.token.epm.CSSHelper.getInstance(CSSHelper.java:45)
at oracle.bi.security.token.epm.JPSToCSSTokenConverter.getCSSUser(JPSToCSSTokenConverter.java:46)
at oracle.bi.security.token.epm.JPSToCSSTokenConverter.convertToken(JPSToCSSTokenConverter.java:21)
at oracle.bi.security.service.SecurityServiceBean.convertToken(SecurityServiceBean.java:339)
at oracle.bi.security.service.SecurityWebService.convertToken(SecurityWebService.java:263)
at sun.reflect.GeneratedMethodAccessor2180.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
And a whole lot more...
But it gives me the same errors when drilling about in the DEMO database.
Can this be about some privileges on the Essbase server? We are using OBIEE 11.1.1.3 and Essbase 9.3.3.
Any ideas?Jacob,
I think I have your answer.
The 11g Release only supports connectivity with Essbase 11.1.1.2 out of the box.
Clearly you need to pull over the correct Essbase client libraries for any other version of Essbase that is not 11.1.1.2 and put them in the appropriate location on your BI Server. In addition you are using Essbase System 9 which actually requires a patch to integrate into OBIEE 11g. If you haven't done on or more steps above then your integration with OBIEE 11g will have difficulties perhaps like what you are experiencing.
A wrote a post last month partially on this topic but you can see where its going from here, http://www.artofbi.com/index.php/2011/03/configure-obi-11g-for-essbase-metadata-import-integration-ootb/. I think a search on support.oracle.com will turn up the path for Essbase System 9 integration with OBIEE 11g but I believe you'll need a password (get from Oracle Support contact) to get it.
That's all I have for now. If this was helpful please throw some points my way. : )
Cheers,
Christian
http://www.artofbi.com -
Join query not getting data from tables
I have total 4 tables, zemployee, zemp_comm,zemp_adress, zemp_edu1 all of this tables are connected through emp_id , but when I write left outer join it returns all rows but emp_id is retrunign null , when I insert all of the entries in respective table it show the respective emp_id, when i left some of the entries in table it will not show emp_id in records,
I am using this select statment........
Select * from zemployee as a left outer join zemp_comm as b on b~emp_id = a~emp_id left outer join zemp_adress
as c on c~emp_id = a~emp_id left outer join zemp_education1 as d on d~emp_id = a~emp_id into corresponding fields of table
emp_itb
where a~emp_name = zemployee-emp_name.
I want to show show records with emp_id whether i put entry in all tables or missed some of the entries.
please help me in this regard.Hi Amir,
You can use Inner join . please refer below code.
Select * from zemployee as a inner join zemp_comm as b on b~emp_id = a~emp_id inner join zemp_adress
as c on c~emp_id = a~emp_id inner join zemp_education1 as d on d~emp_id = a~emp_id into corresponding fields of table
emp_itb
where a~emp_name = zemployee-emp_name.
Regards,
Thangam.P -
I can not get data from the sensor lsm330dl-i​2c (LM3S8962)
Hello
Can you please tell how to configure the i2c for LSM330dl. The application my program, and part of the datasheet.
thank you
Attachments:
545.jpg 35 KB
1.jpg 206 KB
2.jpg 178 KBHi,
I was taking a look at your code and the following example LabVIEW Embedded for ARM I2C Example and there may be an issue with the front panel not updating correctly. Can you use breakpoints and probes to check the wire values? This will let you verify whether the values are actually coming through and just not updating on the front panel.
Also are you able to run that example (you'll have to create a new ARM project to use the example with the LM3S8962)? The example looks very similar to what you are already doing.
Cheers,
Scott A
SSP Product Manager
National Instruments -
Not getting data from attachments
I have the below code in Desiger 10 and it works for the first one or two attachments but then will error out with the following error:
Unhandled exception at 0x5CFCF19A (EScript.api) in Acrobat.exe: 0xC0000005: Access violation reading location 0x80000000.
Code:
var myDoc = event.target;
var attachments = myDoc.dataObjects;
if (attachments == null) {
app.alert("No attachments found!");
} else {
for (var i = 0; i < attachments.length; i++) {
var attach = myDoc.openDataObject(attachments[i].name);
try {
if (attach != null) {
var field = oAttach.getField("myfield");
console.println("field: "+field.value);
attach.closeDoc();
} catch (error) {
console.println(error);
console.println("Done loading attachments");
Once this works, there is more code to add.
Help!The following seems to have fixed:
for (var i = 0; i < attachments.length; i++) {
var attach = myDoc.openDataObject(attachments[i].name);
try {
if (attach != null) {
var field = oAttach.getField("myfield");
console.println("field: "+field.value);
xfa.event.cancelAction = true;
if (attach.disclosed) {
attach.closeDoc();
} catch (error) {
console.println(error); -
Characterestics is not getting displayed from ODS in Multiprovider
I have Join ODS and remote cube in Multiprovider.And data is not getting displayed from ODS fields neither char not KF getting displyed in Multiprovider.I have checked the identification in Char that Char is presend in both the Cube and ODS,But that Char has data in ODS and not in Cube so I checked Char from ODS in Identification.I am still not getting data from ODS.
Can anyone help me in it?How many requests do u have in the ODS?
If u have only 1 then just right click on DSO and say delete data it will be faster than deleting by request wise....
What is the message u r getting when u r trying to delete the request?
Khaja -
can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name. My original external has an error and needs to be reformatted but I dont want to lose this informations its my entire Itunes library.
Sounds like the source drive is formatted as case sensitive and the destination drive is not. The preferred format for OS X is case insensitive unless there is a compelling reason to go case sensitive.
Why can't you change the filename? Is it because the source drive is having problems? If so is this happening with only one or two or a few files? If so the best thing would be to copy those over individually and then rename them on the destination drive.
If it is more then you can do manually and you can't change the name on the source you will have to reformat the destination as case sensitive.
Btw this group is for discussion of the Support Communities itself, you;d do better posting to Lion group. I'll see if a host will move it. -
Data not getting fetched from Quotation to Contract
Hi,Myself new to TM. I have a ticket mentioning data not getting fetched from quotation to contract. How to solve it? Please help...
Message was edited by: Michael ApplebyPlease add the version of the TM product and which SPs have been installed. Also more information on the quotation and contract.
What do you mean by ticket? It you mean an error message, from where are you reading the message?
Regards, Mike
SAP Customer Experience Group - CEG
Maybe you are looking for
-
i believe i am supposed to be able to do a search within applications including ical. but i can't find a way to make the search field come up in ical. and, in the system wide search, i only get one or two ical things....any idea?
-
Error while installing IDES ECC 5.0
(DB) ERROR: DDL statement failed (CREATE UNIQUE INDEX "REPOSRC~0" ON "REPOSRC" ( "PROGNAME", "R3STATE" ) TABLESPACE PSAPIDS640 STORAGE (INITIAL 154105375 NEXT 0000010240K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) ) DbSlExecute: rc =
-
Hard drive and internet issues
My mother has had her IMac for 5 years now and has never done any updates, changes, cleanup, etc. to it. She is now trying to get on broadband internet and the computer will no longer startup without removing the extensions during startup. She has ha
-
Full screen preview image quality?
I've recently taken up the 'Creative Cloud plan for Photoshop customers' and am getting to grips with Lightroom for the first time; previously I've used CS6 and Elements 9 & 11. However, I have a problem with the quality of full screen previews of im
-
Oracle XE 10.2.0.1 ODBC driver load error 1114
Hi everyone, we've got an error in a software application of us using a System DSN in Windows. The system DSN is using the Oracle 10g XE Client ver. 10.2.0.1. When we test the connection in the DSN profile, the system responds "connection succesfull"