RFC (R/3 4.6C) - XI Szenario Problem - Message Payload in XI empty

Hi XI Gurus,
i have a question regarding a RFC to XI szenario. I would like to read a table in an R/3 backend system and send it via RFC to the XI.
I have configured everything (RFC destinations, Sender agreement, Receiver determination, Mapping) but i still have a problem.
When i trigger the RFC on the backend, i get an ABAP Dump. I can view the message in the sxmb_moni - but the payload just contains the "empty" message.
I am not sure if i trigger the RFC correctly. Maybe i understand something wrong.
I have checked all related messages in the forum and spent several hours on finding a solution - but nothing worked in my case.
My ABAP Code for the RFC looks something like this:
Table parameter tp_coss like coss
select * from coss into table tp_coss.
In the report on the R/3 side i have the following code:
data: it_coss type table of coss.
call function 'coss_export'
destination 'my_xi_rfc'
tables
tp_coss = it_coss.
maybe i have a wrong understanding of the rfc sender adapter.
Kind regards and thanks in advance,
Martin

hi,
i completely restarted the xi and now it works. i don't exactly know what the problem was.but it seems that there is a cache problem with user defined rfc's as already described in other threads.
br,
martin

Similar Messages

Officejet Pro 6830 e-All-in-One Ink Cartridge Problem Message

Have/will soon "had" instant ink cartridge service. Printer did not recognize that the black ink was out so I didnt get a black ink cartridge. Couldnt wait for the mail service, so purchased all new HP cartridges and installed.
"Ink Cartridge Problem" Message came up and is now stuck in the machine, can't clear it. The machine will not recognize any of the 4 brand new HP inks; that menu item has little red X for each cartridge and each one shows empty.....
Removed all cartridges, cleaned all contacts, unplugged machine, did a "reset" on the menu via HP phone technician.....nope, nada, nothing.
Did all above SEVERAL times. Called HP back..."40 minutes wait time" .. wth...
Anything else? Does HP have to reset my machine to "recognize" regular cartridges???
Thoughts, suggestions? (Besides don't buy HP again....I will not....I should know better by now!)
Thanks all.
Slow burning in California.....

Hello @brozilla ,
Welcome to the HP forums.
I understand that you are getting a 'ink cartridge problem' message on your Officejet pro 8630.
I would like to help.
The printer does not have to be reset to recognize regular cartridges.
Try going through the steps in the following document.
Error Message Displays for HP Officejet 6810 and HP Officejet Pro 6830 e-All-in-One Printer Series
Also, did you call technical support, or the Instant Ink department?
If you called technical support at 1-800-474-6836, then I would recommend calling the Instant Ink Department.
Please call our Cloud Services at 855-785-2777.
Option #2 for instant ink.
If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Hours:
Mon-Fri. 8am - 11pm, Sat. 9am-8pm - EST
Mon-Fri. 7am - 10pm, Sat. 8am-7pm - CST
Mon-Fri. 6am - 9pm, Sat. 7am-6pm - MST
Mon-Fri. 5am - 8pm, Sat. 6am-5pm - PST
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Problem in Edit Message Payload in AE

Hi all,
actually we have a problem with editing the message payload of a failed message in the adapter engine.
Messages Editor shows "The version you want to edit is locked"
Log in NWA shows "EditorDynPage: loadMessage()
Thrown:
com.sap.aii.mdt.api.exceptions.OperationFailedException: VersionAlreadyLockedException in Method: AdapterFrameworkMonitoringBean: getTransferMessage( Query ). The version you want to edit is locked. Message: Version 1 of message 4eb86ecc-fb6b-0c10-e100-80000a93147c(INBOUND) is already locked for editing.; To-String: com.sap.engine.interfaces.messaging.api.version.VersionAlreadyLockedException: Version 1 of message 4eb86ecc-fb6b-0c10-e100-80000a93147c(INBOUND) is already locked for editing."
How to delet te lock, the nwa => problem management => locks shows no locks?
regards Ralf

Hi,
In NWS, you should also have a tab "Database Locks". See detail in this [SAP help|http://help.sap.com/saphelp_nwpi711/helpdata/en/48/b2e0156b156ff4e10000000a42189b/content.htm].
regards.
Mickael

I have acer al1916w and i have a problem message that say input not supported help

i have acer al1916w and i have a problem message that say input not supported help

under windows 7 - 8.1right click on your desktop and choose screen resolution set a very basic resolution like 1280x1024 @ 60Hz (frequency can be set under advanced options); you need to have a working monitor to set this and then reboot connecting your al1916w. if it still gives you that message, can be a bad cable or some hardware monitor issue.

Hi, Trying to log in with my user id and password at iocbc but was not able to access. Problem message shown : Applet not initialised or may not be supported. Please refresh the page or check the browser setting Anyone can advise? or i need to download?

Hi,
i have the same problem?
Trying to log in with my user id and password at iocbc but was not able to access.
Problem message shown : Applet not initialised or may not be supported. Please refresh the page or check the browser setting
Anyone can advise?

You need to install Java for your Mac OS version, and/or make sure it's enabled in the Java Preferences application and your browser's preferences.

Help!!! hard disc problem message 40gb zen ex

My son purchased a Zen Extra 40 gb about 6 months ago and now will not operate. When trying to reboot, no matter what you try and do, harddisc problem message is displayed. What if any thing can we do? If it's something we can't fix ourselves, where can we send it for repair? Can't seem to find any info on non-warranty repairs! He spent his own money to purchase this... I'd hate to see it go to waste after only 6 months.
Scott

You can try the advice here in the Zen FAQ at Nomadness.net at your OWN RISK.
If this doesn't help, or you don't want to risk it, contact Creative Support via the normal route to arrange an out of warranty repair.

Nothing but 'Problem' message. Tell me how to leave ASAP. Piece of crap.

Just bought ExportPDF 30 minutes ago. Nothing but 'Problem' message. Please cancel immediately. Tell me how to leave ASAP. Piece of crap.

Hi John,
Please see my reply in your other post on the same subject: Please cancel immediately
I would be happy to cancel your subscription for you. Just let me know.
Best,
Sara

I tried to upgrade from cs6 to cc, some programs have been successfully upgraded but some not. Problem with PS. Here is the problem: FATAL: Payload 'Camera Profiles Installer 9.0.0.6 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_d

Hello, I'v been using Adobe creative suite for a real long time and this week end I upgraded to CC. Most of the applications have been installed. Unfortunately I'm not able to install Photoshop and After Effect. Here is the problem:
FATAL: Payload 'Camera Profiles Installer 9.0.0.6 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db
Anyone has a solution for me?

I have recently started having this problem in PSE8. The Adobe workaround
did work, but I don't fancy having to re register each time I use it.
What I have discovered is that it's nothing to do with the image metadata as it occurs before any image is opened.
It SEEMS to only occur if you use file/open with to open an image in the editor - IE start PSE with that command.
If you close elements down, and start it using programs/PSE/Elements (or your desktop shortcut) - the panorama feature magically works.
Each time I've opened the editor 'automatically' using image/open with, it seems to create the problem.
Hope this helps

I got a SeqEdit.exe Problem Message when Inserted expression, is it a bug?

I was trying to insert an expression in the Expression Browser to evaluate limits, but every time I selected "Insert" it displied a SeqEdit.exe problem message and quited TS.
The problem was always with the same specific expression. There are attached 3 files to show the problem. Is it a bug or am I doing something wrong?
I'll appreciate your help.
H.P.
Mfg. Test Engineer
Certified LabVIEW Associate Developer
Solved!
Go to Solution.
Attachments:
ExpressionBrowser.JPG ‏51 KB
NITestStand4.1.JPG ‏26 KB
SeqEdit.exeErrorMsg.JPG ‏27 KB

Hecuba,
This was reported to R&D (# 141372) for further investigation by our developers. After preliminary investigation, it appears as if the CheckLimits() expression language function is not properly checking how many parameters you have passed to it. If you pass the correct number of parameters, it should work correctly.
Thank you for the feedback, and for helping us make TestStand a better product!
Message Edited by Josh W. on 01-20-2009 10:02 AM
Josh W.
Certified TestStand Architect
Formerly blue

I installed Aperture from the App Store, it was working ok, then suf=ddenly it wont load, I get the "Aperture encountered problem" message, have updated all OSX and Aperture but I still cant get it to work, any ideas ?

I installed Aperture from the App Store, it was working ok, then suf=ddenly it wont load, I get the "Aperture encountered problem" message, have updated all OSX and Aperture but I still cant get it to work, any ideas ?

I installed Aperture from the App Store, it was working ok, then suf=ddenly it wont load, I get the "Aperture encountered problem" message, have updated all OSX and Aperture but I still cant get it to work, any ideas ?

If you don't have a credit card then you might be able to use iTunes gift cards instead - that's what I currently use for purchases. You might be getting the 'billing problem' message due to it being a debit card, which as I said I don't think are still a

If you don't have a credit card then you might be able to use iTunes gift cards instead - that's what I currently use for purchases. You might be getting the 'billing problem' message due to it being a debit card, which as I said I don't think are still accepted - you might want to contact iTunes Support via the link that I gave to confirm one way or the other if that is the case.

and now, when i tried to check again my network preference below the airport tab is showing a message that
"my airport does not have an IP address and cannot connect to the internet!"
then after seconds it will goes back to the first message that
"airport has the self assigned IP address etc....."
i don't know whats going on now!
airport tab is not showing green color anyway! i'ts always in yellow!
i tried turning it on and off but nothing happen! HEEELLLLPP!!!!

Installating problem message sever is disconneting

hi friends
i have issue when i am installing the add on ep,di to the existing server ecc 6.0 server
in 33 phase i got this error it can not connect to message server . and disconnecting
ERROR 2008-08-26 18:22:34
CJS-30150 Java processes of instance CGQ/JC33 [Java: UNKNOWN] did not reach state PARTRUNNING after 20:00 minutes. Giving up.
ERROR 2008-08-26 18:22:34
FCO-00011 The step startJava with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_StartJava|ind|ind|ind|ind|5|0|startJava was executed with status ERROR .
thanks in advance
regards
prasad

Do not duplicate posts across different forums.
installating problem message sever is disconneting on aix
Markus

Problem with an IDOC, receiving empty fileds

Hi!
I'm trying to read an IDOC with a Real Time Service through a RFC Client. We have all configured and running, and the Data Flow is as simple as reading the IDOC and writing it to an XML template. The problem is that if I send 3 records, I get all the 3 records in the XML, but only the date fileds have data, all the remaining fields are empty.
We have tried some options but no one is working. Any help please, guys?
See you nad thank you very much
Luis C. Gamiño C.

Hi!
We are using that same example, MATMAS03, to do our configurations. After some testing we have found out that the fields with the type CHAR## are the only ones who are written to the XML file. These fields are originally numbers in the SAP tables, but they are converted to char for the IDOC. But all the remaining fields are empty, but we are sure they have data.
Do you have any more ideas, please?
See you nad thank you very much
Luis C. Gamiño C.

Has the "You shut down your computer because of a problem" message changed?

When I restart the computer after a Kernal Panic I get the message "You shut down your computer because of a problem. Click Report to see detailed information and send a report to Apple"; 2 buttons are shown: "Ignore" and "Report...". For some time now, when I click on "Report..." the message disappears but I used to get a window allowing me to type in information about (something like) what I was doing prior to the problem occurring with a button (something like) 'Send Report". Since the "Report" button now causes the message to disappear, is a Report still going to Apple? Thank you.

Open Console app
View the System Diagnostic Reports by clicking on the disclosure triangle next to it in the log list. If the log list isn't visible, click the Show Log List button.
Look for the latest report starting with "kernel"
Select the report and it will show in the pane on the right.
Select everything in the report except the Anonymous UUID.
Copy and paste it into a reply here.

"You shut down your computer because of a problem" message at each starts

hello, yesterday my mac restarts because of a problem, but since every time I turn on my mac or I restart, it tells me the same message ( want to keep open the last open application,or not ?)
( MacBook Pro (Retina, 13 inch, late 2013), 2,4 GHz Intel Core i5, 8 Go 1600 MHz DDR3, OS x Yosemite 10.10.1 )
It show me that each time wen i start my computer, same if i shut down it without problems.
So, do anyone know how to stop this
thank you in advance
OBrassard
ps: sorry for my bad english

Open Console app
View the System Diagnostic Reports by clicking on the disclosure triangle next to it in the log list. If the log list isn't visible, click the Show Log List button.
Look for the latest report starting with "kernel"
Select the report and it will show in the pane on the right.
Select everything in the report except the Anonymous UUID.
Copy and paste it into a reply here.

RFC (R/3 4.6C) - XI Szenario Problem - Message Payload in XI empty

Similar Messages

Maybe you are looking for