RFC-XI-JDBC testing is not working

Hi,
I created rfc-xi-jdbc. I created 2 dt, 2 msg types, 2 msg mappings, 1 msg interface(synchronous, abstract), 1 interface mapping.
In the CD, I defined, 1 sender, 1 receiver agreement. 1 receiver, 1 sender determination, 1 interface determination, and two comm channels.
My RFC destination is working fine. But in se 37 , when I execute the FM, and submit the RFC destination I am getting dump. Please tell me what causes this error.
In the message mapping when I tested it (rfc-jdbc) mapping, it gets the action as "insert" and not getting table value. Is it supposed to get a table name? or not?
Thanks. I appreciate your help.
Raj.

Michal,
As I said I already have this zreport program. This is how I am calling:
CALL FUNCTION 'Z_PA_DINERS_TXN'
     destination 'DINERSIM' *RFC Dest 4 sender adapter
       EXPORTING
            ID            = lw_id
            INIT_ZDINERS = lw_delete
       TABLES
            IT_ERROR   = IT_ERROR
            IT_ZDINERS = IT_IM_ZDINERS.
     commit work.
Is that correct? I didnot create any seperate program for this, I am using the existing program. Please advice on further steps.
In the RFC destination, do I need to mention XI server params in the gateway server host and service? or my sending system's details?
Thanks,
Raj.
Message was edited by: Raj Peddisetty

Similar Messages

Jdbc to rfc to jdbc scenario is not working

Hi...
We have done the JDBC to RFC to JDBC scenario using BPM, it was working fine in the last month. now we started testing the same scenario, that is not working. In SXMB_MONI it is showing only sender data is successful, it is not showing any RFC Receiver data & Jdbc Receiver data. in the CCM also Jdbc Sender CC is showing successfull and it is showing the successful messages also, but in RFC Receiver CC
& JDBC Receiver CC it is not showing any thing.
please help on this...
Regards,
Pasi.

Hi
Check u r RFC response (put external break point)
and check wether it has data
rgds
srini

Test sequences not working in standard prototype adaptor with Execute Steps in process

Test sequences not working in standard prototype adaptor with "Execute Steps in process" but the sequences works in "Execute steps in an External instance of CVI"(Debug mode). Pl help with solution
Apriciate your help
Regards,
Sharanu

Sharanu,
Thanks for contacting National Instruments. It would help us out a lot if you could specify exactly what is not working. Will the sequence just not run? Is it giving you an error message? Or what exactly does not work about it? The initial thing that I could think of that would make it not work in External Instance but not using the RunTime Engine is that you might be missing a support library when trying to run it in this configuration. If you click on the "Configure Auto-Loading of Support Libraries Needed for Linking .objs and .libs" button, you can make sure that all the support libraries you might be using are added in this list (you can add them using the "Add Other Libraries..." button). If this does not fix your problem, then let us know a litt
le more about what is going on and we can help you from there. Thanks.
Adam B.
Applications Engineer
National Instruments

Conext Sensitive Help Test Tool Not Working

I have been trying to test my map files with the context-sensitive test tool, but am unable to get it working. I am running TCS 3.5 on Windows XP Pro.
I created a map files for Java in the project file and then created several test links with Map IDs. I am working with an offline WebHelp system on my C drive. I open the CSH Test Tool and located the index_csh.htm file for the WebHelp help system and then choose the Map Number. But when I click "Show Help," nothing appears. The hourglass comes up for a brief instant, as if it's going to load the page, but then nothing happens.
Can anyone help?
Thanks in advance.
Douglas

Hi, William:
Your C# API allowed me to successfully test. Thanks.
However, I was reading a bit more of the information on your site, and am still unclear why the deafult RH CSH Tester would not work. I was only using map numbers. Very frustrating.
I also had a few other questions, since this is the first time I'm creating a mapping file in RH:
- Is there any way to batch test? Or, if the icons appear blue (indicating they are correctly linked) in the Edit Map IDs dialogue box, can I just use your C# API to test a few and assume that they others are also working?
- Is this API set to open up the pages in IE by default? Mine is doing that, but I wasn't sure if it was your app or my computer settings. I'm in an corporate environment where we are supposed to use IE as the default browser, although I have FF installed, too. It keeps opening an IE window with a security message that says JavaScript is not supported and I have to click the bar at the top to allow ActiveX controls to work. I'm pretty sure that last part is a security setting I can't change here, but not so sure about the default browser choice.
-I haven't downloaded your API testers in other languages. Are they all the same with the difference just being language preference for the person testing it, or do some of them offer more functionality?
Thanks for sharing your great tool!
Douglas

IDoc string field to JDBC date field - Not working

Hello everyone,
Once again I must ask you something that is keeping me..
I had a interface type RFC ASync to JDBC SQL Server, it was working fine. Then, I was asked to change to a type iDoc ASync to JDBC SQL Server.
At first, it was not a problem, just manual work. But them, I am getting an error.
In the RFC, I had a date field, that was directly related to the date field on the JDBC destination, so the mapping was pretty much straight forward. The SQL INSERT command was working fine on this cenario.
Now, in iDoc, this field was automatically converted to a string, and somehow, PI is not understanding that string has to be mapped to a date field in the JDBC.
Is there any 'workaround' for me to do this?
Thanks!
Ricardo Sancio Lóra
Brazil

The issue here is that somehow, the same SQL insert command that was working, does not work anymore.
This is the SQL command took from RWB log monitor:
INSERT INTO aniversariantes_sap (matricula, nome, nascimento, unidade) VALUES (00000070, 'Ricardo Lora', '19851216', 00000000)
If I run this query on my DB it works.
But, in PI, it's not, here is the error:
Could not execute statement for table/stored proc. "aniversariantes_sap" (structure "ANIVERSARIANTES_SAP") due to com.microsoft.sqlserver.jdbc.SQLServerException: Syntax error converting datetime from character string.
I´ve tried cast() and convert() using mapping 'habilities', but also, does not work. Work if I run in the DB, but not if PI runs it.
Wierd..
Ricardo

Updating my .ipa in DPS App Builder for testing is not working

Hi there,
I've build my .ipa file in DPS App Builder for testing on my iPad before I publish it to the app store. No problem. I tested it and saw some modifications to make. I made the changes on my folio, updated it in the folio builder of indesign (on the cloud). Then I get back to DPS App Builder and rebuild an .ipa file from the "Manage" and "Modify" windows, it download and test my certifates, seems to work ok. Then I've created the new .ipa file (after erasing the old one on my desktop and iTunes) but when I synch it back on my iPad it's not updated. It's still the first version of my folio without the changes.
I tried to create a new app from the beginning but the single edition serial number does not work anymore. So my only solution is to update my folio, right? But what is the right way to do it? Am I missing something? I didn't find any answer in the step by step guide about that.
Or is it possible to delete completly the first version in DPS App Builder to recreate it without losing my single edition serial number as I didn't submit it to Apple yet?
Do I have something to do in the Folio Producer?
Thanks for your help.
Julien.

Single Edition Serial is one time use thus modification is not possible from your end directly in case you wish to use the same serial number. For such cases you need to contact DPS Support, who can get an approval on a serial number reset after reviewing the need.
In this case, I'll take this offline with you in reference to forum post # http://forums.adobe.com/message/5597607.

PHP Local Testing Server Not Working!

Hi Guys,
I've just set up my PHP local testing server, although its not working properly! If you could help that would be so wonderful!
Here is my current settings:
Local Site Folder: C:\XAMPP\htdocs\valsoo\
Web URL: http://localhost/valsoo/
Server Folder: C:\XAMPP\htdocs\valsoo\
Local/Network
Server Model: PHP MySQL
I'm testing the 'local testing server' with a file called site_check.php which works in the Local Site Folder root (C:\XAMPP\htdocs\valsoo\site_check.php) but fails to work when the file is within folders (C:\XAMPP\htdocs\valsoo\lesson01). Not all files work in the root either. ANY SUGGESTIONS?
Thanks so much!

Brentis wrote:
I'm testing the 'local testing server' with a file called site_check.php which works in the Local Site Folder root (C:\XAMPP\htdocs\valsoo\site_check.php) but fails to work when the file is within folders (C:\XAMPP\htdocs\valsoo\lesson01). Not all files work in the root either.
If site_check.php works, your local testing server is working.
What do you mean when you say that it fails to work when the file is in a folder, such as lesson01? What actually happens? What sort of files don't work in the root? Without more details, it's impossible to help.
If site_check.php is in C:\XAMPP\htdocs\valsoo\lesson01, you should be able to access the file through http://localhost/valsoo/lesson01/site_check.php.

Report with JDBC connection does not work when they includes CommandTable

I am trying to render using the new version of Crystal report java component - CRJ a report contains Data base Fileds of type Command Table (Row Set) which seems to be not working.
when i use the previes version of crystal SDK it works fine.
after deugging the Sample CrystalHelper.java file which contains the method .changeDatasource()
i found that the DataBaseController.setLocation() method changes the CommandTable class to Table when using it on CommandTable instance and as result all the fields defined into that CommandTable were disappear.

That appears to be a known issue: Eclipse JRC: To change the JDBC connection at run time
Sincerely,
Ted Ueda

JDBC stored procedure not working in Weblogic 12.1.3

Hi,
We are migrating from WLS 12.1.2 to 12.1.3.
We have a JDBC stored procedure which used to work correctly under 12.1.2. I understand that 12.1.2 uses ojdbc5/ojdbc6 jars (11.2.0.x). After migrating to 12.1.3, the stored procedure is not working.
We have narrowed it down to the different between 12.1.2 using ojdbc5/6 and 12.1.3 using ojdbc7 jars, though we do not understand what the difference here is.
Connection connection = getConnection();
CallableStatement callableStatement = connection.prepareCall("{call RECEIPT_LOG (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}");
callableStatement.registerOutParameter("PIO_RECEIPT_LOG_ID", java.sql.Types.INTEGER);
callableStatement.setLong("PIO_RECEIPT_LOG_ID", 0);
callableStatement.setString("PIO_DRAWER_NAME", request.getDrawerName());
callableStatement.setString("PIO_DRAWER_FIRST_NAME", request.getDrawerFirstName());
callableStatement.setString("PIO_DRAWER_OTHER_NAMES", "");
callableStatement.setString("PIO_DRAWER_STREET_NO", "");
callableStatement.setString("PIO_DRAWER_STREET", "");
callableStatement.setString("PIO_DRAWER_LOCALITY", "");
callableStatement.setLong("PIO_DRAWER_POSTCODE", 0);
callableStatement.setString("PI_PAYMENT_TYPE", request.getPiPaymentType());
callableStatement.setLong("PI_APPLICATION_ID", request.getApplicationId());
callableStatement.setString("PI_PRIMARY_ID", request.getPiPrimaryId());
callableStatement.setString("PI_SECONDARY_ID", request.getPiSecondaryId());
callableStatement.setDouble("PI_AMOUNT", request.getPiAmount());
callableStatement.setInt("PI_TAX_AMOUNT", 0);
callableStatement.setNull("PI_VPC_TXNRESPONSECODE", java.sql.Types.VARCHAR);
callableStatement.setInt("PI_VPC_TRANSACTIONNO", 0);
callableStatement.setString("PI_VPC_MESSAGE", "");
callableStatement.setString("PI_VPC_ACQRESPONSECODE", "");
callableStatement.setString("PI_VPC_RECEIPTNO", "");
callableStatement.setString("PI_VPC_BATCHNO", "");
callableStatement.setString("PI_VPC_CARD", "");
callableStatement.setString("PI_VPC_MERCHTXNREF", "");
callableStatement.setString("PI_VPC_MERCHANT", "");
callableStatement.setString("PI_VPC_ORDERINFO", "");
callableStatement.setInt("PI_VPC_AMOUNT", 0);
callableStatement.setString("PI_VPC_AUTHORIZEID", "");
callableStatement.registerOutParameter("PO_RECEIPT_NO", java.sql.Types.VARCHAR);
callableStatement.registerOutParameter("PO_SOURCE_ID", java.sql.Types.INTEGER);
callableStatement.registerOutParameter("PO_PAYMENT_METHOD_TEXT", java.sql.Types.VARCHAR);
callableStatement.registerOutParameter("PO_CREATE_COMMENT", java.sql.Types.VARCHAR);
callableStatement.registerOutParameter("PO_ERROR_MESSAGE", java.sql.Types.VARCHAR);
boolean isSuccessful = callableStatement.execute();
Long receiptLogId = callableStatement.getLong("PIO_RECEIPT_LOG_ID");
Here, when the callableStatement.execute() is fired, the isSuccessful is false and the output parameter receiptLogId is 0
Any help appreciated.
Regards,
Rahul

Hi All,
We still haven't figured out what the problem is with JDBC when using ojdbc7.jar but, as an alternate solution we ported the code to Spring JDBC and got it working.
Regards,
Rahul

Delete Operation in JDBC Sender Adapter not works

Hi,
    I have one student table which contains the fields ID,Name,BirthMonth,BirthYear,ReadFlag fields. ReadFlag is a character field or lenght 1 which contains only values either 'Y' or ' '.
     I want to execute delete operation in this table ie to delete the records which contains the readflag = 'Y'. So, I set the below values for the following parameters.
DELETE FROM student WHERE READFLAG = ' Y '
Query SQL Statement : SELECT * FROM student WHERE readflag = 'Y'
Update SQL Statement : DELETE FROM student WHERE READFLAG = 'Y'
Poll Interval : 60 Seconds.
    There are more records in this table which contains readflag = 'Y'. But, the Adapter does not delete those records from the table i.e delete operation is not executed. At the same time, in Comm. Channel monitoring it does not show any error, but the delete operation is not carried out in the table.
     I tried after 'COMMIT' the table also. But it does not work. What could be the reason ? or How to use Delete Operation effectively on the table ?
     Kindly help me friends to solve this problem.
Thanking you.
Kind Regards,
Jeg.

http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm >>>
<i>Adapter Work Method
You must add an indicator that specifies the processing status of each data record in the adapter (data record processed/data record not processed) to the database table.
The UPDATE statement must alter exactly those data records that have been selected by the SELECT statement. You can ensure this is the case by using an identical WHERE clause. (See Processing Parameters, SQL Statement for Query, and SQL Statement for Update below).
<b>Processing can only be performed correctly when the isolation level for transaction is set to repeatable_read or serializable.
Example
SQL statement for query: SELECT * FROM table WHERE processed = 0;
SQL statement for update: UPDATE table SET processed = 1 WHERE processed = 0;
processed is the indicator in the database.</b></i>
try with repeatable_read or serializable !!!
Also go thru this thread - DELETE Querey in JDBC SENDER

** RFC to JDBC scenario - Need not source code - Correct ?

Hi Friends,
I am doing RFC to JDBC scenario. It is a synchronous scenario. I think it is need not required to write any code in the source code tab of RFC. Is it correct ...? (Only Import and Export parameters are enough.)
Kindly reply, friends.
Kind Regards,
Jeg P.

Hi,
RFC needs only configuration and we will call remote method in R/3. Actual logic present in R/3.
Thanks,
RamuV

War file deployment to Test env not working

Hi All,
i am using war file as scheduler for calling bpel process. Now i need to move the same war to test environment. For this i followed this site http://biemond.blogspot.ca/2009/04/using-weblogic-deployment-plan-to.html. But it is not working.
even i update the generated deployment plan to weblogic console, but still this is not working.
here is the my web.xml file
<?xml version = '1.0' encoding = 'windows-1252'?>
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
         version="2.5" xmlns="http://java.sun.com/xml/ns/javaee">
<description>Empty web.xml file for Web Application</description>
    <context-param>
        <param-name>wsdlUrl</param-name>
        <param-value>http://sasoah91.corp.gdglobal.ca:8001/soa-infra/services/TarakTest/TSStoRMSScheduler/tsstormsschedulerproject_client_ep?WSDL</param-value>
     </context-param>
<servlet>
    <servlet-name>SOASchedulerServlet</servlet-name>
    <servlet-class>sample.oracle.otn.soascheduler.SOASchedulerServlet</servlet-class>
     <init-param>
      <param-name>cronExpr</param-name>
      <param-value>0 0,5,10,15,20,25,30,35,40,45,50,55 * * * ?</param-value>
    </init-param>
</servlet>
<servlet-mapping>
    <servlet-name>SOASchedulerServlet</servlet-name>
    <url-pattern>/soaschedulerservlet</url-pattern>
</servlet-mapping>
<welcome-file-list>
    <welcome-file>/soaschedulerservlet</welcome-file>
</welcome-file-list>
</web-app>My deployment plan is
<?xml version='1.0' encoding='UTF-8'?>
<deployment-plan xmlns="http://xmlns.oracle.com/weblogic/deployment-plan" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/weblogic/deployment-plan http://xmlns.oracle.com/weblogic/deployment-plan/1.0/deployment-plan.xsd" global-variables="false">
<application-name>TSSScheduler.war</application-name>
<variable-definition>

    <variable>
        <name>wsdlUrl</name>
        <value>http://sasoah81.corp.gdglobal.ca:8001/soa-infra/services/TSStoRMS/TSStoRMSScheduler/tsstormsschedulerproject_client_ep?WSDL/</value>
     </variable>
    </variable-definition>
<module-override>
    <module-name>TSSScheduler.war</module-name>
    <module-type>war</module-type>
    <module-descriptor external="false">
      <root-element>weblogic-web-app</root-element>
      <uri>WEB-INF/web.xml</uri>
          <variable-assignment>
         <name>wsdlUrl</name>
         <xpath>/web-app/context-param/[param-name="wsdlUrl"]/param-value</xpath>
         <operation>replace</operation>
       </variable-assignment>
      </module-descriptor>
</module-override>

<config-root>/u01/textdata/SOATST/Tarak/deploymentplan</config-root>
</deployment-plan>I ran below code
export ORACLE_HOME="/u01/app/soadev/product/fmw11/middleware"
echo "ORACLE_HOME=$ORACLE_HOME"
ls -l $MW_HOME/wlserver_10.3/server/bin/setWLSEnv.sh
. $MW_HOME/wlserver_10.3/server/bin/setWLSEnv.sh
export JAVA_HOME="/usr/java/jdk1.6.0_24"
export planname="TSSScheduler.xml"
export warfile="/u01/textdata/SOATST/Tarak/TsstoRmsSchedulerProject/deploy/TSSScheduler.war"
echo "---------------------------------------"
echo "THE CLASSPATH=$CLASSPATH"
echo "---------------------------------------"
java weblogic.Deployer -adminurl t3://sasoah81.corp.gdglobal.ca:7001 -username weblogic -password Soatst_s132 -deploy -name TsstoRmsSchedulerProject -source $warfile -targets AdminServer -stage -plan $plannameCan some one please let me know where i am going...
Also can some one tell me any other way to change the endpoint in war file. this is very urgent so kindly request all to let me know how to go with it.
Regards,
Tarak.

Hi,
Here is what the parameter says
<servlet>
<servlet-name>SOASchedulerServlet</servlet-name>===================My Serverlet name
<servlet-class>sample.oracle.otn.soascheduler.SOASchedulerServlet</servlet-class>======Server class
<init-param>
<param-name>cronExpr</param-name>=======this is cron job
<param-value>0 0,5,10,15,20,25,30,35,40,45,50,55 * * * ?</param-value>===this invoke my bpel process in every 5 mins.
</init-param>
</servlet>
Please see the side line comments
Sure i will open the ticket,
Regards,
Tarak.

Sound Blaster Rage VoiceFX Test button not working

I purchased my creative sound blaster Tactic3D Rage headphones today and so far I am really happy with them. The only thing that bugs me is that the test button for VoiceFX in the control panel doesn't seem to work. I press it and talk through the mic, but nothing happens. I know the VoiceFX works because I tested it out through Skype test call. Only the test button in the control panel doesn't seem to work

Originally Posted by dinopkk
Hi Cavegraffitti,
Since you have tested it on another computer with the same result, there may be a problem with the headset. But do you want to try to do a hardware reset to the headset? It will reset the settings on the headset and maybe fix your problem. This website contains steps to do a hardware reset for the Sound Blaster EVO Zx and it can be used for the ZxR as well.
If you have not updated your headset's firmware you may want to give it a try as well.
I can now confirm what the problem is. After reformatting my whole operating system I was indeed able to get the software to work properly again, however after a windows update the software will not work properly again. Confirmed same thing about the windows update on my other pc as well and the only way to get it to start working again to to do a system restore point before the last update.
I am sorry but this is unexceptionable! So I have to stay on an old version of windows in order to use this product...
I want a full refund please.

Jdbc tracking does not work in JDeveloper 10.1.2

My project consists of a single jsp file, and two libraries: JSP Runtime, and DebugJDBC. The latter simply includes ojdbc14_g.zip
The JSP FIle is
<%@ page contentType="text/html;charset=windows-1252"%>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
<title>untitled</title>
</head>
<body>
<%
oracle.jdbc.driver.OracleLog.startLogging();
%>
</body>
</html>
The error I get is:
Oracle Jdbc tracing is not avaliable in a non-debug zip/jar file
Should I log a bug about this?
Thanks,
-Robert

I just verified that the problem does not exist in JDeveloper 10.1.3.0.4.
Regards,
-Robert

Program making a RFC call to Function Module not working in background

Hi All,
I have an ABAP Program which is used to do a reconciliation check between the R/3 and BI system for Invoice Data. Please find below the details of the program flow:
1.     Program counts the number of records in the DSO table and aggregates the Net_Value based on the date range (passed as parameters)
2.     Program calls a Function Module (RFC Call) which counts the number of records in the R/3 table and aggregates the Net_Value for the same date range
3.     Function Module Passes back the count values and aggregated Net_Value to the program
4.     Program compares the count and aggregated Net_Value from EDWH and MSP systems and sends an email mentioning whether the counts match or not
However we are facing an issue.
Whenever, we execute the program in dialog mode, it works fine and fetches results within 5-6 minutes. However if we schedule the program to run in background (parameters through a variant), it gives no results even after running for over 3-4 hours. We tried figuring it out yesterday but could not come to any conclusion. Since there is a RFC call being to the function module, we were wondering if we need to specify some other parameter as well.
Thanks & Regards
Dharmendra

RFC Call is a procedure for executing remote enables function modules. It is done via the 'Remote Enabled' radio button on the function module's attribute screen.

RFC-XI-JDBC testing is not working

Similar Messages

Maybe you are looking for