RFC2File - Simulate?

I've built an RFC to File Scenario,
but having issues with SAP Connection.
I want to know the best way to simulate
the rest of the scenario from within XI
to File.
Any Help?

Hi Rajender,
no problem then:)
you can easily simulate your RFC message
by sending a message directly to the integration engine
with the test tool
take a look at my weblog on how to do it:
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible
Regards,
michal

Similar Messages

I am trying to simulate sequential threads ...

Hi ,
I am trying to simulate a load testing scenario on our Java Connector Implementation ( JCA) through a test class.I would have loved to use a load testing tool like JMeter but unfortunately JMeter doesn't have built in JCA sampler.
Basically I am trying to simulate multiple sessions and each session would be comprising multiple requests to the Application server . I want to simulate multiple requests belonging to a session as multiple threads that run sequentially one after another and uses a common connection object to simulate calls to the connector.
All is ok. I know it will be a Thread within Thread kind of program... But the point where I am stuck is how do I ensure that all threads that are simulating requests to the app server(ie requests within a sibngle session) run sequntially ? I am seeing that all the threads are starting in parallel which I want to stop. Any code snippet will be highly useful.

subhrajyoti wrote:
If I am not wrong every requests(within a session) from the broswer to an application server is a separate thread . each of these these threads run sequentially .
I want to simulate the same thing. So I need threads .Each request from (the same or different clients) will cause the creation of a new thread ON THE SERVER.
I think this is where you are becoming confused, you have stated that multi-threading is occurring on the browser/client, it is not (necessarily) the case, the multi-threading is happening on the server.
Also please spell-check your text before posting it.

Simulate load times

Hi all,
Anyone here knows if we can simulate load time in BW?
Example, i have a DSO that goes to a Cube for reporting.
I would like to simulate how long 100,000 records will take to get from ECC to the Cube.
I might later want to test how long 250,00 records will take.
RSA3 is not useful as it can only test how fast the extractor will take.
Is such as thing possible?

Hi Ganesan,
1) for DSO to Cube Loading: You have to create a DTP.
   Execute the DTP with Debugging mode (simulation).
   Then in the monitor you can find the time taken.
2) for Loading from ECC to BI : You have to create Info package.
   But info package does not give any option for simulation.
cheers.

Is it possible to simulate a table for reference in the "Custom Calculation Script" in Acrobat?

I am attempting to simulate a table in a Acrobat form where the formula looks at the number or name from another field and looks through the code for the name or number reference and returns the value associated with the number or name. Is this possible in Acrobat forms?
Bruce

Yes, it's possible. You can get the name of the field that is being calculated using event.target.name, and then you can manipulate that name to get a row number (for example) and access other fields in that row.

I am trying to simulate the robot voice synthesizer sound that is produced by that electronic voice simulator after someone as had their voice box removed. The vocal transformer insert in Logic Pro doesn't quite do it. Suggestions?

I am trying to simulate the robot voice synthesizer sound that is produced by that electronic voice simulator after someone as had their voice box removed. The vocal transformer insert in Logic Pro doesn't quite do it. Any Suggestions?

Try one of the Audio Voice Effects like Alien / Cosmic / Robot… etc. to start with…
Adjust the Settings in the Inspector to your liking…

How to pass value to BAPI_INCOMINGINVOICE_PARK (simulate MIR7)

Hi Gurus:
I am using the BAPI_INCOMINGINVOICE_PARK to simulate the transacation of MIR7. I pass in all the values that I input in MIR7 into the BAPI and i am facing an issue that if the data, which i passed to this function, contain the return PO( normal PO & return PO). the result is incorrect althought the invoice can be created.
compare with the document which is created by manually(MIRO), the different is :
1:"the sign of invoice item"
Manual document is "-".
BAPI document is "+".
detail you can refer to my attachment.
this inconsistent data will caused the invocie can't park since the variance of the invoice amount & quantity.
do you have any idea solve this issue? i have check the import parameters and can't find the parameter which is named "the sign of invoice item".
points will reward.
BR
Sam

Hello,
Have you checked line item structure of BAPI.
See below screen-shots for your ref.
Thanks!
Sameer Desai

What does the open file dialog do 'under the hood' and is there a way to simulate it

What does the open file dialog do 'under the hood' and is there a way to simulate it?
I have a bug in my code (that I've posted about before, here) which I can't fix at the moment, but I do have a workaround.
Briefly, the bug:
I call a dll from a function node, to initialise and run a spectrometer. If I start up the PC, LabVIEW and run my vi the code runs without complaint, the first call to the dll to initialise the spectrometer doesn;t return an error but the spectrometer is not detected either.
I've tried various solutions, see the link above, and none work
The workaround:
If, at any time before running the code containing the function node I open an 'open file' dialog window, select the dll and click ok/hit enter then everything is fine. When I run the main code the spectrometer is detected.
I use an express vi to open the file dialog, I specify the start path and file name as constant inputs and just click ok/hit return when the dialog pops up. I don't do anything with the dialog outputs. In fact the vi that contains the open file dialog can be run before the project containing the bug is even open.
I have to do this everytime I turn the PC on.
So, either
1) Can somewone suggest a fix for the original bug?
2) What is the easiest way to simulate the enter keypress when the open file dialog pops up
or
3) Can someone tell me what the open file dialog does under the hood that somehow causes the dll to work and can it be simulated in straight LabVIEW
I suspect that the dll itself is dodgy ( I have in the past talked to the supplier but not got very far, and I will try again but I would like a quick, temporary solution too). I'm guessing that the file dialog is making some kind of check on the file, and possibly registering its presence with the OS (winXP). I tried using the file/folder exists vi to see if checking the file like that worked but no luck.
Any help greatly appreciated.
Dave

Hi David
I am very conscious about thread hijacking but this sounded like my issue so I hope you dont mind me asking about your issue. I am hoping that you have a spectrometer from the same vendor as me and its not just me seeing an Error 1097 issue. My spectrometer is from a company called Stellarnet.
So far I have unable to get it to work with other VIs. There is one condition where I can get it to work but its no good for me.
Case 1
I open the VI in a fresh labview environment with no other VIs in memory. The code runs with no issue.
Case 2
Labview is not opened. I double click the spectrometer VI in windows explorer. The VI opens but it fails to run resulting in Error 1097. Personally, I dont see the difference between this and Case 1 above and yet it fails.
Case 3
If I already have other VI's in memory and try to load the spectrometer VI and run it fails with Error 1097. This case is the one that most important to me. I have a test executive that will load test VIs dynamically and I can't get this to work. Same problem Error 1097.
I wanted to share what I have seen with you and to let you know that maybe somebody else has the same issue. I am convinced its the DLL but the vendor dis-agreed saying it was LabVIEW. I couldn't convince him otherwise.
Thanks in advance
David

How Can I Simulate Double-Clicking A File To Open It In The Default App Without Installing Default App?

I have an app written with Visual Studio 2013. The app has code for opening a file using the standard OpenFileDialog and also has code (AutoOpenFile()) for opening a file when a user double-clicks on a file that is handled by the app. I have not yet created
an installer for the app, so I won't be able to test it's AutoOpenFile() code...unless there is a way to simulate the process of auto-opening the double-clicked file without actually installing the app on my PC. Anyone?

Thanks for your reply, Wyck. I already have the necessary code in my app for opening a file when I double-click on it. The problem is that the app is not currently installed on my PC. Until I do install it, is there a way I can test-run that code
by double-clicking on an associated file?
You lost me at: you want to test-run code that is not on your PC.
O_o
You want to double-click a file, and then...what do you want to have happen? You want to run...something...that is not on your PC??
The "simulation" is to launch your app from the command line and pass in the name of the file you wanted to simulate a "double-click" of.
Regardless, you cannot get the shell to have a double-click of a file cause your application to launch unless you modify the registry to do so. (This is tantamount to "install" to me.)
In the spirit of continuing to be helpful, though, I'll assume that this is what you want to do and I'll show you how to get it done with the least amount of tampering with your registry.
Here are minimally invasive registry modifications you need to make to get it to launch a program when you double-click your file. It's pretty small.
EXAMPLE ONLY:
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\.wyck]
@="Wyck.Document"
[HKEY_CLASSES_ROOT\Wyck.Document\shell\open\command]
@="c:\\windows\\system32\\notepad.exe \"%1\""
[You have to save the above with your appropriate modifications to a file with the
.reg extension (e.g.: test.reg) and then you'll have to double-click the test.reg file to "merge" these settings into your registry.]
The example above registers a file extension called .wyck and assigns a completely arbitrary class name to it called
Wyck.Document.
Then it associates a shell open command with the Wyck.Document class that causes
notepad.exe to be passed the filename of the file you double-clicked (that's what the
%1 does). You are welcome to replace all the specific names with your own extensions and class names and replace notepad.exe with the path to your (test) executable.
This executable will be launched, but not with a debugger attached. To facilitate debugging it, you'll want to temporarily add some code to your program to pause when the program launches, possibly by showing a message box right at the very beginning
of your main function that says "attach debugger now" so that you can attach a debugger to the process that was started by the shell, and then dismiss the message box and continue debugging.
When you are done with your testing, you can simply manually delete those two registry keys using
regedit.

How to simulate 'Use Page style' for a portlet

All,
How do i simulate the 'use page style' feature for a custom portlet ? Currently, I have to hard code the style.
thanks

uploaded gif under mime repository

Can LabView simulate multiple nodes on a single CAN bus?

We currently are developing a system where a single control panel controls a number of drive motors over a CAN bus. Each of those drive motors has electronics and software in them which tracks the status of the motor, and this information is sent over the CAN bus to the control panel.
We have previously used Vector CANoe to simulate the activity of the drive motor nodes on the CAN bus during development of the control panel. We want to move to LabView in order to run this kind of simulation.
Is it possible for LabView to be used to run this kind of simulation? Each node would have its own CAN ID on the bus. It would need to send out appropriate periodic status messages on that CAN bus that would be based on user inputs. It would also need to display certain information based on commands sent to it via the control panel over CAN.
Thanks for the assistance.

Hi,
I believe that what you need is to simulate several CAN ports. There is a similar discussion form that I believe will answer you question. I hope this helps.
Regards
Krista S.
Applications Engineering
National Instruments

SP 2013 Development - How can I Simulate Different Devices to Help Design and Test a New UI?

Hello Community!
I am working with SharePoint 2013 and I need to be able to design and test a new design across multiple device browsers. Does anyone know how to simulate a device browser for design and testing? BTW, I know about Device Channels, and they give
me a way to dynamically change my UI for different device browsers, but because this UI is complex, I cannot be sure what dynamic changes need to occur until I can simulate the device browsers and view my new UI in them.
Thanks!
Tom
Tom Molskow - Senior SharePoint Architect - Microsoft Community Contributor 2011 and 2012 Award -
Linked-In - SharePoint Gypsy

Hi Tom,
Because your question is mainly how to simulate different devices, which is more related to SharePoint development, I am moving this thread to
SharePoint 2013 - Development and Programming forum for better response.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to implement Modbus Ethernet communication in Lookout, if we want to simulate the PC as PLC ?

Problem Description :
Dear Sir,
We are doing a project where we are using Lookout with
Front end Modicon PLC. The communication is by
Ethernet, using Modbus.
Since the installation is at a distant place, we wanted
to use another PC (running Lookout) to simulate the
PLC. For this, we tried to communicate
a: the server Lookout PC running Modbus Ethernet mode of
Modbus object as Master
b: with another PC (for simulating the PLC) running
Modbus Slave
We did not get any communication. (we have given the
details of what we have done, at the end of this email)
We also tried connecting the above 2 PC's as
a: the server Lookout PC running Modbus Serial mode of
Modbus object as Master
b: with another PC (for simulating the PLC) running
Modbus Slave object
Again we did not get any communication.
If instead of PC (b) we connect the Modbus simulator to
PC (a), there is no problem in communicating
Please let us know how to go about establishing the
communication between 2 PC's using Modbus serial,
and Modbus Ethernet. A detailed step by step procedure
would help us a lot.
Thanking you
Warm Regards
Raja Mahbubani
Procedure of our trial with ethernet.
This is what we have done in detail.
On PC A:
We created an object (Pot) and connected it to
the modbus data member of the modbus object say 40001. In the
properties of the modbus object we selected modbus ethernet mode
of communication and in the IP address field we wrote the IP
address of the machine B to which we are trying to communicate
i.e. 152.63.50.2.
On PC B: we tried the following two methods
Trial 1 : We created a modbus slave object and
inserted an expression for the same data memeber to which the
object was connected hoping to get the value of the pot of machine
A on machine B.
Trial 2 : We created a modbus object on machine B and we wrote
the IP address of machine A and inserted an expression for the
same datamemeber to which the object was connected hoping to get
the value of the pot of machine A on machine B.
NI Software : Lookout
Version : 4.0.1 or 4.5
OS : Windows 98
NI Hardware : N/A
Drivers : N/A
Other Hardware/Instruments : N/A
CPU : Pentium
RAM : 64
Vendor : S-Tech
Customer Information :
Raja Mahbubani
Theta Controls
IN
[email protected]
Ph: (+91) 20 4222556/7

The ModbusSlave which comes with Lookout currently supports only Serial communication. So, you cannot use Ethernet between your two PCs. At least not with Modbus Master-Slave setup (if you must speak Ethernet between the two PCs, IPASCII object lets you do that, but then you'll need to implement your own protocol).
Since all you want to do is simulate a Modbus PLC on a PC, you can use the Serial mode of communication for now. And later on just modify the Object in your Server Lookout to use the Ethernet mode.
For setting up a Serial Modbus Slave, use a null-modem cable between the two PCs (lines 2 and 3 are swapped). On your PC 'B,' create the Modbus Slave object with the right COM port for that PC. And on your PC 'A' create the regular Modbus Object as if you w
ere connecting to the Modbus Simulator box. The only difference here is the cable. The simulator box uses a straight-through cable whereas the Slave needs a null-modem cable.
Hope this helps.
Rgds,
Khalid

How to simulate a dml error in order to test try-catch code block inside a stored procedure

Hi,
What would be the easiest way to simulate a dml error in order to test a try catch block.
I would like to do it with a simple command from outside the stored procedure if possible.
I tried dropping the table that was updated but it hangs
Thanks,
Dani

Dropping the table that is the target of the procedure will give you an unpleasant surprise: the CATCH block will not fire. To wit, errors like missing tables can only be caught in outer scopes, but not in the procedure where the error occurs.
But you would add a fake constraint to a table which causes the update to fail. You need to do this in advance, not while running the procedure.
Erland Sommarskog, SQL Server MVP, [email protected]

How do I simulate a right-click in Windows when connected with Remote Desktop 8.0 for Mac OS X?

When connecting to a remote Windows 7 OS from Mac OS X 10.8.5 with Microsoft Remote Desktop 8.0.24091, I'm not able to simulate a right-click with the Apple magic mouse.
On an older version Microsoft Remote Desktop Client version 2.1.1, I can hold down shift+ctl on the Mac and click the magic mouse to simulate a right-click in Windows. With this new version RDP 8.0, I can't find any way to simulate a right-click,
other than to select "Swap mouse buttons" under settings, and then every click is a right-click and then I'm no longer able to left-click (which is even worse). I've tried several key combinations and nothing seems to work. Am I missing
something simple here with the new RDP 8.0 application, or is the right-click simulation not (yet) functional?
Any help is greatly appreciated, thanks!

In order to make use of the right-click inside an open session you have three options:
Standard PC two button USB mouse
Apple Magic Mouse: To enable right-click, clickSystem Preferences in the dock, click Mouse, and then enable Secondary click.
Apple Magic Trackpad or MacBook Trackpad: To enable right-click, click System Preferences in the dock, click Mouse, and then enable Secondary click.
Extracted from "Remote desktop Client on Mac: FAQ"
http://technet.microsoft.com/en-us/library/dn473006.aspx

GPRM Button scripts work in Simulate, but not after burning

Hello everyone:
I have a question regarding GPRM-based buttons and scripting menu navigation. My scripts work perfectly in DVD Studio Pro's simulate mode, but after building and formatting a DVD, the scripts do not function properly on a set top box, in Apple DVD Player, or when playing from the Video TS folder. The scripts were based off of a tutorial by Hal MacLean at dvdstudiopro.co.uk.
Essentially, I have one track which is accessed via a Main Menu or a Chapters Menu. There is an animation that plays at the head of each menu, so menu has a loop point. The user should return to the correct screen, the correct button should be highlighted, and the menu should jump to the loop point. All of these things happen in simulate mode, but after burning, the loop point is ignored: The correct menu and buttons are highlighted, but the menu plays from the beginning. Here is how the project is laid out:
From the main menu, if the user chooses Play Movie, the following script plays:
mov GPRM 0, 1
Jump Feature
From the main menu, if the user chooses Chapters, the following script plays:
mov GPRM 0, 0
Jump Chapters Menu
Each of the chapter buttons is assigned to the start of a scene. The feature's menu call is assigned to the following script:
mov GPRM 1, SPRM 8
div GPRM 1, 1024
Jump Main Menu(Loop) [GPRM 1] if (GPRM 0 = 1)
Jump Chapters Menu(Loop) [GPRM 1]
I was able to make the menus behave properly by writing the scripts this way:
mov GPRM 1, SPRM 8
div GPRM 1, 1024
Jump Main Menu Script [GPRM 1] if (GPRM 0 = 1)
Jump Chapters Menu Script [GPRM 1]
Main Menu Script:
Jump Main Menu(Loop)
Chapters Menu Script:
Jump Chapters Menu (Loop)
But, although the user is returned to the correct menu and the loop point, now only the default button is highlighted.
Has anyone run into the same issues? Can anyone see any flaws in my scripts, or have any suggests? i would really appreciate any thoughts you all have. Thanks for your time!

Do you have any pre scripts atached to the menus? I was having the same problems as you and found that pre scripts and GPRMs don't play nice (at least in DSP). Removing the pre scripts solved my issue.
http://discussions.apple.com/message.jspa?messageID=4643747#4643747
Good luck!

RFC2File - Simulate?

Similar Messages

Maybe you are looking for