RFIDYYWT / 1099 reporting / include doc type AB?

We are preparing to use SAP's 1099 Misc reporting functionality for the 2011 tax year, and have managed to resolve most issues. However, we can't figure out how to get miscellaneous journal entries (doc type AB) included in the reporting. I've confirmed that the line items in BSEG have the appropriate withholding tax code (07), but when I run RFIDYYWT, the 'AB' documents aren't being included.
Can/should AB documents be included in 1099 reporting? And if so, what do we need to do to ensure that they get pulled in?
Thanks in advance!
Allison

Hello Allison,
Please review the following documentation on the field reporting period.
Field ; Reporting period
Posting date in the document
Date which is used when entering the document in Financial Accounting
or Controlling.
Use
The fiscal year and the period for which an update of the accounts
specified in the document or cost elements is made, are derived
from the posting date.
When entering documents, the system checks whether the posting date
entered is allowed by means of the posting period permitted.
Note
The posting date can differ from both the entry date (day of entry
into the system) and the document date
(day of creation of the original document).
The selection criterion in RFIDYYWT is the posting date
(not the clearing date).This is entered in the 'reporting period' field.
Consider the following example:
-invoice document posted in 2004 -payment document posted in 2005
1. if you select period 20010, only the invoice will be reported
2. if you select period 2011, only the payment will be reported
This may cause confusio if the calculation of the w/h tax does not occur
within the posting period selected (the calculation of w/h tax depends
on your settings: it could be w/h tax at time of invoice or at time of
payment).
Please, understand that mainly based on the selection criteria and
the output defined the document will be selected or not.
Currently, documents are getting selected based on the reporting date.
The reporting date is the posting date in the document, that means, the
date which is used when entering the document in financial accounting
and the withholding tax amount is posted.
Hope this helps,
Regards
RAY

Similar Messages

Doc type and drilldown Consolidate data transfered from FI

Dear all members,
I config doc type for data realtime update from FI.
But when i run report CX34, doc type of data transfered from FI to EC-CS is blank.
And I can't drilldown this data.
Please show my mistakes
Many thanks,
Orchid
Edited by: Orchid675 on Jul 2, 2010 5:12 AM

Dear Orchid,
in EC-CS the document number and the document type will be new, the doc type info will not be updated so the original FI doc type will disappear.
Typically, in EC-CS all reported financial data (so documents from FI) will be updated with the same doc type at posting level SPACE (realtime update) or 00 (all other).
I hope my question helps.
Ciao,
David

SAP 1099 - not showing credit memo - KG doc type

Hello,
When i run the generic w/h report for 1099, it is not showing credit memo , KG doc type .
The vendor is flagged for 1099 and also the KG doc contains the W/H base and tax code .
please let me know .
thanks very much.

Hi,
I am sorry, the note is not releasead yet. I will let you know when it would be.
Meanwhile, please check if the hints below resolves your issue:
Please run the S_P00_07000134 report (RFIDDYYWT ) with option of 'Further Selection' 'Credit Memo Doc. types' Technical name of P_CMDCTY with value of KG then desired result will show.
with Additionally
please refer the note no 945664
MANUAL ACTIVITIES:
1. Goto trasaction se38
2. Give the program name as 'RFIDYYWT'
3. Click on Goto->Text Elements->Selection Texts on the Menu bar
4. Goto editable mode.
5. Search for parameter 'P_CMDCTY'. Specify the selection text as
'Credit Memo Doc. types'. Uncheck the adjoining checkbox for Dictionary
ref.
6. Activate the changes.
I hope it helps.
Best Regards,
Vanessa Barth.

1099 Report doesn't include Down Payments

Hi,
While running 1099 report we figured out that it is not including down payments made to the vendor. Can anybody please tell me if there is a configuration required for this? We are on v4.7.
Thanks.

Hi,
If you are on SAP ECC, now we use the Generic Withholding Tax Reporting program for 1099 reporting (Program RFIDYYWT). It has selection fields for Special GL transaction. Specify the special GL indicator for downpayment in the seletion field and the down payment document should be included in the 1099 report.
If you are on SAP 4.6c, and using RFW1099M, go to Dyanmic Selection and you will have special GL indicator selection available in Dynamic Selection. Select the relevant Special GL Indicator to include down payment in 1099 report.
Hope this helps. If this is useful, pls. award points.
With Regards,
Chirag

FI doc type(ex.MM doc type) not display Report FMAVCR01

Hi Experts,
I have to control FMAVCR01 Report display that
FI doc type(Blart type - WZ (MM doc) transfer posting is not included in the output.
How to control display fi Doc type at FMAVCR01?
Thanks for your answers

Hi,
FMAVCR01 is the report for displaying consumtion in AVC budget ledgers. If the documents in question were included in budget consumption, the FMAVCR01 will show them. So, the question is whether you simply don't display this consumption or you don't want these documents to consume the budget. In the first case, you will have to define your own report; in the second case, you have to modify the derivation logic for controlling objects in AVC.
Regards,
Eli

Cannot find sales doc type data in my report on the multiprovider

hai everone,
I'm doing report on the multiprovider which is connected to different ods's i'm getting the data for all the fields except for 'sales doc type'.I could see the data for it in the ods on which the multiprovider is built but could not find the data in the report.Can any one suggest me how to get the data for sales doc type into my report.
Urgent..

yeah listcube is a TCODE to check the data in the cube. run the code and enter the same selections that you would be doing on a query to see and see if it returns any data. if it does, then the problem is with the identification. Most of the times create recommendations work like a charm. But just go into the chars and see if the IO in question has been checked against the ODS that aint returning any records.

REPORT-TOTAL GR VALUE FOR DOC TYPES MONTHWISE

Dear Experts,
Please help me out for finding how to see the total value of GR for doc types NB and the Assets monthwise..

Hi,
Use ME2L or ME2K standard report.
In ME2L report enter the Purchasing org, Scope of list (ALLES), Plant, Account Assignement category A, Document date.
In ME2K you can see the report for individual asset.
Regards
Karthick

Include Movement Type into FBL3N and NA into MB51 (SAP report).

Hi SAP Gurus,
1.Is this possible to Include Movement Type into FBL3N, if You guys know that pls let me, what are the steps require.
2.Enhancement to existing SAP report, t-code:KOB1 to include standard cost, std quantity, actual cost, actual quantity by part details and assembly part number in SE & SR document type
Guys please help on this.

Hai
i thought u require the layout which give report like FBL3n ,not in standard lyout which u insert field.
then go path in clude it required field
Financial accounting /genaral ledger accounting/gl accounts/line items/display line item. where u may go for new field to
insert like by new entries..not only for gl,u may search for ap,ar, also get this type configuration for respective path.
clear

AR Recievables Balance not including RZ doc types

Hi,
Our recievables balance in FD33 (KNKK-SKFOR) is not including RZ doc types. So, the customer open line items blance (FBL5N) does not match the Recievables balance in FD33. Any thoughs?
Thanks,

You are welcome. I'm glad you got it back up.
(1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
(2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
(3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
(4) Add some SARE rules:
Visit http://www.rulesemporium.com/rules.htm and download the following rules:
70sareadult.cf
70saregenlsubj0.cf
70sareheader0.cf
70sarehtml0.cf
70sareobfu0.cf
70sareoem.cf
70sarespoof.cf
70sarestocks.cf
70sareunsub.cf
72sare_redirectpost
Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
backhair.cf
bogus-virus-warnings.cf
chickenpox.cf
weeds.cf
Copy these rules to /etc/mail/spamassassin/
Then stop and restart mail services.
There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!

Changing doc. type after creating a doc. type.

Hi Friends,
We are doing our time ageing from the time of creating the document in DMS. We created a document with particular doc. type wrongly, after two days we found that the DMS creation was done with wrong doc. type. In this how to transfer to new correct doc. Type, if we delete this & create a new we canu2019t get any info that it was created two days back.
We made Z report for this time ageing report.
Regards,
Sai Krishna

You cannot change the document type after the document has been created. The only way to do this would be with an enhancement and this would create major issues with the integrity of your system

WRP1 excluding open POs based on doc type

Hi friends,
We are using SAP IS Retail ECC 6.0
In our business, we are having requirement that Open PO quantity of particular document type (eg ZNBA) should be excluded from the WRP1 requirement calculation.
Eg:
For an article 100001, Site A001, following are the details,
Reorder point - 10
Target stock - 20
Current stock - 5
Open PO quantity: (ZPO1 and ZPO2 are PO doc. types)
ZPO1 - 2
ZPO2 - 1
Now WRP gives requirement of article as of 12 quantities.
My requirement is to it should not include ZPO1 open quantity in consideration but should take ZPO2 into consideration.
Hence requirement is to create PO for 14 quantities
How do I achieve this?
We have a control in SAP IS Retail where we can specify, that stock of which storage location should be considered in replenishment requirment calculation.
Do we have a similar control for the PO Doc type? If not, how do I achieve workaround?
Thank you,
regards,
Gaurav

Hi,
Do the Following, Create a new storage location., "ZL01"
Whenever your creating a PO with this "ZPO1" document type assin this Slocation "ZL01", then do the below settings in SPRO..
SPRO->Materials Management->Consumption-based Planning->Planning->Define Storage Location MRP per plant.
(In RP indicatior please give "1"Storage location stock excluded from RP, this will exclude the stk from this location)
Regards
GK.
Edited by: Gnana Kumar on Oct 22, 2010 11:15 AM

Delete a line item from Sales Doc type RE

Unable to delete a line item from a sales order linked to document type RE. Get a long runtime - no specific error message. Use the 'Stop Transaction' option to end the transaction.
Have done thorough testing and can delete line items linked to all other sales document types in our system.
Researched SPRO to see if there was a line item deletion option that was not created for sales doc type RE - but can find nothing.
On a critical time line here - this was discovered during Hotpak installation testing which is scheduled to move to PRD June 22. Question as to why we have not run across this issue before now?? - I don't think we have had an occasion to delete a returns line item before - but I want to have the option if available.
Any help to resolve this issue would be appreciated.
Regards
Patsy

Thanks for your response.
After creating document type RE, execute VA02 transaction, select line item, select delete line item icon. The system goes into runtime and just stays there. No error message, no abap dump. To escape the transaction, I have to select 'stop transaction'.
I have tested all other document types we use in our system, (including our customized transactions) SO, CR, DR, etc., and the system allows line item deletion.

Inserting a node in XML and retaining the doc type

Hi All,
I want to insert one new node in an XML. Using the following code I can do that. But the problem is if the XML has doc type declaration then its giving me problem. After inserting the node the transformer is removing my doc type declaration from the XML. I have to retain the doc type definition (including entity declaration) as it is in the original XML file.
The following is the code that I'm using.
Document vDoc = null;
try {
// Contruct the DOM document
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
DocumentBuilder builder = factory.newDocumentBuilder();
vDoc = builder.newDocument();
Node vFormNode = vDoc.createElement("Form");
vDoc.appendChild(vFormNode);
// Convert into a String the DOM document
TransformerFactory tFactory = TransformerFactory.newInstance();
Transformer transformer = tFactory.newTransformer();
DOMSource source = new DOMSource(vDoc);
StringWriter sw = new StringWriter();
StreamResult result = new StreamResult(sw);
transformer.transform(source, result);
catch (Exception e) {
System.out.println("Error: " + e.getMessage());
}The doc type def. in the original file is some thing like this.
<!DOCTYPE article SYSTEM "someurl/TFJA.dtd"[
<!ENTITY T0001 SYSTEM ".\BTN_A_000112809_O_XML_IMAGES\BTN_A_000112809_O_T0001.gif" NDATA GIF>
<!ENTITY F0001 SYSTEM ".\BTN_A_000112809_O_XML_IMAGES\BTN_A_000112809_O_F0001g.gif" NDATA GIF>
<!ENTITY F0002 SYSTEM ".\BTN_A_000112809_O_XML_IMAGES\BTN_A_000112809_O_F0002g.jpg" NDATA JPEG>
]>I know that I can set up the doc type definition in the new XML using the following properties of the transformer.
transformer.setOutputProperty( OutputKeys.DOCTYPE_SYSTEM,"article" );
transformer.setOutputProperty( OutputKeys.DOCTYPE_PUBLIC,"my DTD def");
I cannot hard code the DTD def. as it can vary from one XML to another. Using doc.getDocType() I can get the doctype of the original XML. But is it is not returning the complete def. including entities declaration. Its giving me "someurl/TFJA.dtd".
Is there any way to retain the complete doc type in the original XML file? I don't have much experience in XML and this issue is eating my head.. Also do I have to modify the DTD to accommodate the new tags added in order to make it a valid XML?
Any help and sample code would be highly appreciated.

Hi,
I also had similar requirement and when searching i came across this post. Later i found the solution for this. Instead of hardcoding the doctype you can get it from Document as follows..Snippet from the code i used..
DocumentType doctype = document.getDoctype();
if(doctype != null) {
               String id = doctype.getSystemId();
               if(id == null || id.length() == 0)
                    return;
               transformer.setOutputProperty(OutputKeys.DOCTYPE_SYSTEM, id);
               id = doctype.getPublicId();
               if(id == null || id.length() == 0)
                    return;
               transformer.setOutputProperty(OutputKeys.DOCTYPE_PUBLIC, id);
Hope this helps.
Regards,
Deepak

1099 report- program RFTW0010/RFTW0020

Hello All
I am facing some issues with the 1099 reporting. We have many vendors that were setup incorrectly as 1099 vendors. A lot of documents have been posted to them. I deleted the withholding tax information and ran the correction program RFTW0010 and then ran the 1099 report S_P00_07000134 - Generic Withholding Tax Reporting but this report still shows all the documents already posted.
Looks like the only way for me to fix this, is to go and remove the withholding tax information from each line. This is not possible. Is there a solution for this? what is the use of these programs? they only update the with WITH_TAX tables and fix a vendor going forward right?
Does SAP not have a solution for this?
When do I run the program RFTW0010 vs RFTW0020.

Hi,
The 2 reports mentioned by you viz., RFTW0010/RFTW0020 are to be used when you are changing the vendor master and then wants to correct the line items posted to be in sink with the changed vendor master.
I guess, in your instant case also, the report RFTW0020 is relevant, is you have changed the code and report RFTW0010 is relevant is you have changed the WT Type.
Hope this helps.
Vikas.

Urgent !!!!!!! 1099 reporting

Hello Experts,
I am having a problem in 1099 Vendor reporting using the program "RFKQSU20". I was trying to get the list of taxable and non-taxable 1099 amounts by vendor. I was getting a report which has no data in that, even though I posted a vendor invoice (FB60) for a 1099 vendor with the full invoice amount as "W.tax base" and did the vendor payment.
Any Help in this regard is duly rewarded and appreciated.
Regards,
Sriram
null

Hi Sriram
You need to maintain the Country code in vendor master.
Also recipient type is not required for 1099 reporting. It is required for 1042 reporting
Reg other point, TIN is a tax identification number. It can be SSN (Social Security Number) or EIN (Employer Identification number). This is required for IRS.
Amounts range from $10 to $600 in a financial year depending on the nature of services. Mostly it is $600.
Hope they are useful
S Jayaram

RFIDYYWT / 1099 reporting / include doc type AB?

Similar Messages

Maybe you are looking for