Rfposxext - Adding special field

Could anybody help me with this issue?
I need to add a special field to the automatically generated structure rfposxext. The field name is REGIO. I tried with SPRO but the source table where the REGIO is present is not available in the list of change-allowable tables. Please assist me if anybody knows a solution to this issue. Thanks in Advance

HI,
not sure if you know SAPNET note 984305 which describes how to define special fields in your case.
best regards, Christian

Similar Messages

Adding Special Field in the line item display

Dears Through SPRO settings, I added the field 'Group Account Number' (ALTKT) for the GL line item display.
It is now transported to Quality.
When I try to see that field in the change line item layout, I could not find that field for inclusion.
However, in the SPRO of Quality, I find that field already appearing.
Why it is not appearing in the FBL3N special field screen ?

Hi Niki,
I am not sure how you have added this filed but if you follow these steps you will have it.
1- Run FBL3N and make your settings and execute it (F8).
2- Go menu Settings > Special fields (You can run it by t code OBVU out of FBL3n also)
3- Add a new entry, select your field (BSEG ALTKT Group account number) and save it
4- Back one step (F3) and select "Change layout..." icon.
Now you have the field in "Hideen fields" column. Just select it as "show selected fields"
Regards,
Omid

To show a special field on the ME2K report

Hi everyone,
The question is about adding a field in the ME2K report. In the layout is needed the PO status, that is wether the PO is still open/completed or not. I was taught dynamic selection can be used to filter by the 'Delivery Completed' criteria, however the info does not appear on the report when doing this way. Is there a way, excl. programming a new transaction, to have the 'Delivery Completed' field appearing on the report? Are special fields available for ME2K?
Many thanks and regards,
SB

to close

Adding custom fields to the condition table in CRM

Hi all,
Our requirement is to download the sales conditions type from R3 to the CRM system. In one of the condition table we are trying to add shipping point( VSART ) and Special processing indicator (SDABW).
For that we have added the fields in the structure CND_MAPT_ACS_REM_CUST (Comm. Structure Condition Exchange Customer Exit R/3 Fields) and we have added the fields in the field catelog in transaction ( /SAPCND/CTCT - Maintain Condition Tables). Then we have mapped these fields in the view V_CND_MAP_CNVFLD.
Finally we run the adapter object of that particular table to download the details from R3, but the condition table in CRM is not getting activated, so the adapter object is giving the error.
Please help in this.
Thanks & Regards,
Raghuram.

Hello Raghuram,
I feel that your issue is similar what i have faced, refer to my post:
Link: [Issue in customer specific price;
For solving this you can refer to detailed steps in, Note 514952 - Download of customer-specific tables.
Also additionaly you may need to run the report /sapcnd/rv12n001, as i also had to do so.
If not solved then let me know the relevant message in SLG1
Regards

FAGLL03 Special Field Values Do Not Display in Production

We are using the new GL in ECC 6. I have a strange problem where special fields that were added to the line item transactions display in dev and quality but not in production. Please read the steps that I have taken.
1. Using note 984305 we defined special field BSEG-MATNR using this path:
Financial Accounting (New)
General Ledger Accounting (New)
    Master Data
      G/L Accounts
        Line Items
          Define Special Fields for Line Item Display
This field (U_MATNR) displays correctly in FAGLL03.
2. I used note 1034354 to create an implementation of BAdI 'FAGL_ITEMS_CH_DATA. Then I
followed the documentation of the BAdI to create structure CI_FAGLPOSX within FAGLPOSX and added these fields:
Material Type: field MARA-MTART
Material Group: MARA-MATKL
I added code to method CHANGE_ITEMS to read for those fields. Here's part of the code:
* MARA - Get Material Type and Material Group
    SELECT SINGLE mtart matkl
      FROM mara
      INTO (wa_items-zzmtart, wa_items-zzmatkl)
      WHERE matnr = wa_items-u_matnr.
The values of these fields display correctly in development and quality, but they do not display in production.
3. When I debugged FAGLL03 in development I found that the value of U_MATNR was filled when I stopped at method CHANGE_ITEMS. However, when I debugged in production, U_MATNR was not filled. It had to be filled at a later time because the value appears on the report. In my code, I am using U_MATNR to find the values of material type and material group. Because U_MATNR doesn't have a value at that point in time in production, my code doesn't find material type or material group.
4. I contacted SAP and was instructed to use note 984305. I executed the function module
ITEM_STRUC_EXTENSION which did not help.
5 I also used note 205096 to execute report BALVBUFDEL, but this did not help either.
6. At this point, SAP told me that it is a consulting issue. I'm not sure that it is because I'm using SAP solutions without modifying anything.
7. I tried to compare configuration between development and production, but everything looked OK to me.
Has anyone had this problem? Any tips?
Brenda

Hi Brenda,
>
Brenda Bankert wrote:
> 6. At this point, SAP told me that it is a consulting issue. I'm not sure that it is because I'm using SAP solutions without modifying anything.
I have no idea except that you can make sure Include CI_FAGLPOSX is active as well as the including FAGLPOSX. And please check the transport protocol(s) if CI_FAGLPOSX is included. If you have any kind of error/warning in the import protocol, that may give you a hint.
If nothing helps, create a new sap support case and tell them you are using SAP solutions without modifying anything.
Regards,
Clemens

How to use RECNUM special field in a file bulk load interface (sqlldr)

Hi,
I'm trying to load an ordered set of full text lines from a flat file using Sql Loader 11.2 with ODI 11.1.1 bulk LKM (LKM File to Oracle - SQLLDR).
I have to keep track of each line number in a separate target table column NUM_SEQ and feed it with sqlldr RECNUM special field.
I haven't found any other way to do that but to tweak manually the generated sqlldr .ctl control file (bad but it works) :
NUM_SEQ RECNUM,
FULL_LINE CHAR(4000)
I've tried to map "RECNUM" as an expression in the map tab of the loading interface but the column itself gets discarded at .ctl generation.
I haven't found any mention of RECNUM in the whole ODI documentation, neither on this forum nor the Web.
Using an internal Oracle sequence in the subsequent steps of the ETL breaks the garantee of ordered lines.
Any hint ?

You will have to enhance the KM so that this clause gets added to the CTL file each time.
Add an Option to the KM in which you can specify name of the column that you want to act as line_number.
And then in the KM, change the "Generate CTL File" step and add
*<%=odiRef.getOption("RECNUM") %> RECNUM*
after the call to the <%=odiRef.getColList(" ") %> API
So, this will add the RECNUM column to the list of the columns generated.

Add a special field in Line Item Display.

Hi Gurus,
I need to add the field "Entry Date" in the GL report FAGLL03. I added the entry -
BKPF - CPUDT in the Settings => Special Fields from the menu bar.
Also mentained the same in SE11.
It's working fine on Quality Server, but when I transfer the request to Production, it creates an Workbench request only and also the field "Entry Date" is not available for selection in Select Layout - Hidden Fields.
I think I need to run some program fot the same to execute or anything else. Can you guide me to a proper solution or advide me if I am doing somethign wrong.
Regards,
Devang

Hi,
Thanks for your knowledge, but I did exactly the same and cant get the Field in the Field Selection - Hidden Fields.
Currently referring Note # 984305.
YES!!!!!!!!!!!!!!!!
I DID IT
After referring to the above note, I had to ...
Call transaction SE37, enter the function module ITEM_STRUC_EXTENSION and execute it with the following parameters:
BASIC_STRUCNAME                 FAGLPOSY
EXT_STRUCNAME                  FAGLPOSYEXT
EXT_FIELDS_TABNAME              T021S
I_LSTCL                         D
X_TRANSPORT                     ' '
Thats it......
Thanks,
Devang
Edited by: Devang_Sangani on Apr 22, 2010 6:02 PM

Adding BKPF_XREF1_HD field for FBL3n and FBL1N dynamic selection

Hi Friends,
Is there any possible way to add the BKPD-XREF1_HD field to FBL1N and FBL3N transactions?
As per my knowledge both are line item related process which contains other than BKPF table entries. Bue my client wants to add in the Dynamic selection as it available for FB03 transaction.
I tried thru SE36 but no result. (BRF)
Please adivse what are all the ways to do that or is there any SAP notes available for possible or not possible solution.
Plaase reply.
Thanks & Regards
Sankar.

Hello Sankar babu,
These fields need to be setup as Special Fields in T021S. You can do this by the following path in IMG:
Financial Accounting->General Ledger Accounting->G/L Accounts-> Line Items->Display Line Items with ALV->Define Special Fields for Finding and Sorting Data. (transaction OBVU).
Please check SAP note 207436. It describes you how you should act to see the field XREF* in transaction FBL*N.
Regarding the Special Fields, please see SAP Note 215798. This note will explain that the special fields need to be in table T021S as well as in the RFPOSXEXT structure which can be verified in SE11. If these fields are not yet in RFPOSXEXT see Note 215798 (you can verify this in RFPOSXEXT by going to the bottom of the structure and see under column 'Component' that special fields are denoted by 'U_XREF1'). You may see a field XREF1 under the 'Component' column, but these fields are NOT the special field. The special field is denoted by U_fieldname!!!
However, the field BKPF-XREF1_HD is used in Real Estate module. In this field, you can define control information for all line items.This field is used in third-party management in RE to assign a business transaction to a third party.
Please note that table BKPF is not directly selected in the logical database, so the usage of the field in the selection views in SE36 will not work. So you may have to create the field in the index tables.
I hope this information helps.
Thank you.
Suresh Jayanthi.

Added new field to cube but data not passed from DSO

Hope someone can help.
(BI 7.0) We added new fields into a cube. The fields already existed in the DSO. When we ran the process chain in development for the first time after making this change, we notice that the 'historical' data for these fields is populated in the cube. When we do this in our quality system only new data passed to the cube is updated. In development in the sub-chain DTP request we see all previous requests listed under selections. In quality it is only the latest request. The only difference is that the DeltaInit flag in the DTP request in development is ticked (extraction mode) - but not in quality. Does anyone know whyb this is?

hi peter,
Adding fields to cube doesn't affect delta status...The delta DTP should be able to handle delta requests automatically.
I guess in you quality system, the cube already got all requests updated from ODS before you importing the change request. And in develop system none of the requests in ODS were updated before the change.
Regards,
Frank

Adding new field to data source -can not see them

Experts,
I have added 4 fields to the data source 0FI_AA_11 .
I can able to see these fields in the append structure or in RSA2,but i can not able to see in RSA6.I reactivated append structure ,still i can not see these fields in RSA6.
Please advice me how can i see them in RSA6.

Hi Manoj,
Have a look, similar post:
Re: not able to see new fields in datasource
Hope it Helps
Srini

Added new field to ALV but not displaying the ouput

Hi guys,
I'm adding one more column to be displayed on an old existing program that uses REUSE_ALV_FIELDCATALOG_MERGE to generate the ALV fieldcat.
DATA : BEGIN OF itab OCCURS 0,
matnr LIKE eina-matnr,
extwg LIKE mara-extw,
matkl LIKE mara-matkl,
mtart LIKE mara-mtart,
maktx LIKE makt-maktx,
lifnr LIKE eina-lifnr,
wglif LIKE eina-wglif,
<span style="color:red">idnlf like eina-idnlf,          " <----
new field</span>
name1 LIKE lfa1-name1,
profl LIKE mara-profl,
END OF itab.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
      i_program_name         = sy-cprog
      i_internal_tabname     = 'ITAB'
      i_client_never_display = ''
      i_inclname             = sy-cprog
     i_bypassing_buffer     = 'X'
    CHANGING
      ct_fieldcat            = t_cat
    EXCEPTIONS
      inconsistent_interface = 1
      program_error          = 2
      OTHERS                 = 3.
I've added in a new field inside the ITAB internal table, but it wouldn't appear in the t_cat, only all the old fields will appear. What have i done wrong?

Hi
Facing similar kind of issue.. added one field to the existing internal table. This is not getting populted by the field catalog merge FM. Tried with the suggested solution also of running programs BALVBUFDEL,
BCALV_BUFFER_DEL_SHARED then logging off and logging in..
But the newly added field is not getting populated. Any suggestions would be of great help.
Regards,
sridevi S

Adding new field to Remote Cube

Hello,
We have an existing remote cube that we are trying to add a new field to in 7.0. I've already added the field to the datasource, unhidden it, and tested it in RSA3. Now i'm trying to bring it into BW and add it to the remote cube. I right clicked on the source system under the data target and chose Replicate Metadata however the new field does not show up anywhere. What am i doing wrong? Does a remote cube work differently? How do i get my new field over from R3?
Regards,
TMS

That's the problem. The R3 field does not show up in the datasource in BW so it can be moved over to the transfer structure. As you know when you replicate metadata, the new datasource fields appear and can be mapped into the transfer structure. That is not the case for this remote cube. The new field is not there.

Adding new field to Customer master sales data area sales tab

Hello everyone,
I am new to module pool so seeking some help from experts here.
I have a requirement were in I have to add a new field to the customer master (VB02) sales area data sales tab.
I found that there is no screen exit.Is there any other way of doing it?
could you please provide me with a step by step procedure of doing it.
With Regards,
Karishma.

Hi,
How did you look for screen exit? Have you also tried it in BADI? 'Coz normally, adding custom fields to a standard screen has to be implemented in exits.
I haven't worked with VB* screens yet so I can not give you a some possible exits. But you can do some debugging. I think there's an available code in the net that searches for exits/screen exit (ask Mr.Google). You can also ask him how to search BADI in debugging mode. I remember it's TCode SE24 then look for cl_exithandler class, get_instance method. Then look for exit_name variable.
Hope this helps.

Adding new fields to the data flow

Hi,
I am currently planning to add some new fields in one DSO and map it (with info source) in the update rules.
Will adding new fields to Info source - Comm. structure affect all the update rules connected to it?
The info source is connected to multiple DSO.
(The data source is currently under enhancement for these fields). Once this is done, we have to replicate it to BW.
Thanks,
Naveen

yes.
Once the enhancement is done for data source in r/3 side, you will have to replicate the datasource in BW.
Adding new fields will deactivate the update rules. You have to map the same in update rule and activate the same.
This will require activation of transformations, update rules, etc for related DSOs. Try to find out the where used list for the DSO where you want to add the new objects. Then check each objects whether these are activate after the changes. If these are inactive, you will have to activate all the objects.
Cheers
Chanda

SRM 7.0 -Adding Custom fields in Contract Item screen at particular positn

Hi,
We have a requirement to add new custom fields in the Contract Item screen at required position, in Left and right side container.
We have tried the following methods but have not been able to achieve the same. Kindly help!
1) Added new field in Context through enhancemnt in the Details screen View of Contract , Binded the field to the field in structure INCL_EEW_PD_ITEM_CSF_CTR and add the field to teh Layout - Using this method, The field is not saved to the table.
2) Added the field to meta data table /SAPSRM/V_MDF_IC - This is positionng the field on teh right container at the bottom. We want to position it on left side.
Kindly help to understand where we are going wrong.
Thanks in advance,
Regards
Prasuna.

Hi Prasuna,
Sorry ..You are right..I was looking at some other WDC related to contract data..It you map the CUFs to /SAPSRM/S_CLL_CTR_ITEM which has the include structure INCL_EEW_PD_ITEM_CSF_CTR then it should work fine.
If you do this, are you able to view the new fields on the screen?
you mentioned that you are not able to save the data to the table.
Include your fields in INCL_EEW_PD_ITEM_CSF as well because if you add CUF to any of those doc types, you also have to add those CUF to the global structure for CUF documents.
Also Check if you fields are there in structures BBPS_CTR_CUF_ITEM,BBPS_CTR_UI_ITEM and BBPS_CTR_ITEM.
Check whether you have implemented the BADI's like BBP_DOC_CHECK_BADI ,BBP_DOC_CHANGE_BADI and BBP_DOC_SAVE_BADI . check out the structures (whether they having the CUFS) used in those if you have implemented any of them .
Regards
Lavanya
Edited by: LAVANYA CHAVA on Aug 25, 2010 10:10 AM

Rfposxext - Adding special field

Similar Messages

Maybe you are looking for