RFQ Conditions automatically gets copied in new document

Hello All,
I have an issue. I maintain net price and discount condition in RFQ for service and save it. Whenever I maintain price for new service RFQ the discount conditions maintained in the previous RFQ gets automatically copied, which is undesirable.
Is there any setting to avoid this?
Pl. help.
Sanjay

Hello Charlie,
Thanks for your prompt reponse. I did the settings in OMFI as suggested by you,
1) Removed the tick from ref. to ref. doc in fast processing tab and
2) Set the radio button to Do not copy in Price Adoption tab.
But still it is not working.
I have one more doubt, this setting would also be applicable for PO, right? After I do these settings there would be effect on the PO as well. How could we avoid getting this effect to PO.
Please confirm.
Thanks.
Sanjay

Similar Messages

Scrap Sales-VAT Condition Type Not Copying into Billing Document.

Dear All
I am facing problem while billing a scrap sales order.
1. Even though condition record has been maintained for JIVP, the condition is not picked automatically.
2. I enter it manually and save the document and later do delivery and billing; in billing, if I go to Conditions Tab, I do not see VAT condition copied into the document.
Naturally, when I am doing analysis, only PR00 condition type is showing.
Kindly require your suggestion as to where I might have gone wrong.
Thanks and Regards
Adithya

Prasanna,
It is fine to press Release to Accounting button, but the issue has not yet been identified to fix and then Release to Accounting.
When I go to document flow and check the accounting documents in Goods Issue Document, Accounting document has not been created only, only Profit Centre and Controlling Documents are created. Am looking on the same y it has happened like this.
Thanks and Regards
Adithya

CRM Return/Complaint - Manual Condition not getting copied from ECC Invoice

Hi There,
I am creating Return/Complaint Request and referencing <i>ECC Invoice in TRANSACTION DATA > Referenced Documents Tab.</i>.
All other condtions are getting copied except the <b>manual fixed price and manual discount.</b> These condtions are present in the referenced ECC Invoice. So while referencing ECC invoice all the condtions should get copied to CRM Return/Complaint Request.
Please suggest.
Thanks and Regards
Dnyanesh

HI
Dyhnayesh are you working this on CRM Service side or trying to do in other IMG?
make sure that Implement it under crm service varanties with RMA
Return Merchundise Authority when customer wants to return the good back
may be faulty one what ever is the reason , this things you have to implement it under IMG>CRM>Service> RMA Waranties
Reward with Points
Venkat

Scheduling Agreement - Conditions not getting copied from Contracts

Hi All,
Requirement: Global outline agreements with scale prices will be created in SRM which will be into ECC as Contracts. Scheduling agreements will be created referecing the Contracts and the conditions with the scale prices needs to be copied into the scheduling agreement.
Issue: We could create Global outline agreements in SRM and are getting replicated into ECC as contracts successfully. Conditions and the scale prices are not getting copied into the Scheduling agreement from the Contracts.
Please guide.
With regards
Krishna

Hi,
I couldnt reach out a solution for this problem.
SRM Version: SRM 5.0
Yes. We create Scheduling agreements referencing the contracts.
With regards
Krishna

Condition (FRB1) getting copied from Old PO to New PO

Hi All
I have and issue wherein I am creating a PO with Plant material and vendor combination.
I have entered Freight value. and saved the PO.
Next time i am creating PO with the same Plant material and vendor combination ,it is copying the freight conditions from the earlier PO.
The conditions are picked from the last PO .
Also the freight conditions are not getting updated in info record so from where it is picking the freight condition ,i am not able to understand
I also dont want to use the below functionality
SPRO-MM-PurchasingEnvironment DataDefine Default Values for Buyers--Settings for Default Values
-->No price adoption
and the parameter EVO to be entered in SU3
Because if i use this then price i will have to enter manually coz it wont adopt from anywhere.
Can you suggest the method so that system doesnt pick the freight conditions from the last PO ( It is not picking from Info Record)
REgards
shailesh

Then do not assign the pricing schema & schema grp in vendor master.Create only info records.The system will pick the conditions fron IR.

Freight Condition not getting copied from order to billing

Hi,
Here at my clients place, i have created new condition type for freight(which will be calculated after excise duty and VAT).This conditon type should not increase the order value but increase tax amount in sales order item level.
For this i have created new conditon type ZFRI-Manual Condition
Condition Class- D (taxes)
Calculation Type- B (Fixed amount)
Condition Category-F (Freight)
In sales order i have maintained this condition manually and done PGI,
Now when i am going to create billing that condition is not displaying in billing-VF01.
Kindly suggest...where to check...
thanks in advance...

Dear Ullas,
In your Billing document go to Item Condition detail screen & there would be a button on bottom of the screen - Update.
Double click on this update button & select G - Copy pricing elements unchanged and redetermine taxes.
This would solve your problem.
If not, then check copy control setting between your Sales, Delivery & Billing Documents.
Hope this helps.. .
Give points if useful...
THanks,
Jignesh Mehta

Service or Discount Condition to get printed in Sales Document.

Today we use materials and services during the sales orders creation, but the services go directly to billing without passing by the delivery document. We are offering a $3.50 USD Coupon to the Customers and I want to see it printed in the Sales Order when the sales is completed. I tried creating a Condition a header level, it works and I can automate the discount during the price determination, etc. But it doesn't get printed in the Customer Document.
How Can I get this discount printed in the sales document using either a Service and/or a Condition?

In V/08 pricing procedure maintain the printing indicator to print. If you allready maintain that indicator for your condition type then check with the ABAPer for the same.
Regards,
Ramesh

Condition YPS1 not copied into Billing document

Hi All,
I have an urgent issue wherein my condition YpS1 determined in the sales order is not copied into the billing document
Any suggestions would be appreciated... The YPS1 is pulled out from the standard price from the material master
Any suggestions would be appreciated
Thx,
Vinay

Thanks for the reply.really appreciate it.. On further investigation my copy control is set up in this way,
SO --> Delivery && Delivery --> Billing.
In my Billing copy control(Delivery- BillinG) i have a pricing tye set up as Customer Reserve X.... do you think i might have to check this???Please advice where to check as i do not have any idea on what this customer reserve X means??
Thanks again
Regards,
Vinay

Po text to be automatically copied in clearing document

We need to have the PO text of each line item to be replicated in the text box for each clearing document . Currently in clearing document manual text of PO is entered and our client needs that PO text should automatically get copied while clearing accounting document number.
Pls help me to resolve this issue.
Thanx n regards
Amit

Hello Amit
What do you mean by clearing document....r u refering to Invice?
Best Regards
Avinash

Automatically attaching CSS style sheets to new documents

I wanted to alert everyone to a great new Community article published by Adobe Community Expert David Powers. The article details how to attach CSS style sheets automatically when you create new documents.
Here's the article:
http://kb2.adobe.com/community/publishing/505/cpsid_50564.html
This handy option is easy to miss, especially if you don't use the New Document Dialog box to create documents, so big thanks to David for highlighting this.
Furthermore, the appearance of such an article is a great example of how Community content can interact and live symbiotically with Adobe Help. We've linked directly to David's piece from our documentation, and this is indeed a great thing because David is able to go into much more detail about the process of automatically attaching style sheets than we are able to do in Help:
Create a blank page
Create a page with a CSS layout
If you're interested in publishing Community articles of your own, you can download the Community Publishing AIR application and get right to work!

Jon Michael Varese wrote:
We've linked directly to David's piece from our documentation, and this is indeed a great thing because David is able to go into much more detail about the process of automatically attaching style sheets than we are able to do in Help:
Can I ask why?
David's excellent standard should be the minimum standard for Help files.
The quality of software manufacturers' Help (not just Adobe) has deteriorated greatly over the past decade - to the point where it's now my last resort for learning.
Software manufacturers seem to tacitly rely on 3rd party book authors (such as David's brilliant material), bloggers and online tutorials to explain their products these days.
I'm happy not to have a printed book with my software any more because they were always out-of-date and hard to update. However the quality of PDF and online Help docs is so poor and sparse for my use that I prefer to get my answers by Googling, visiting forums or buying the occasional book.

Can user-defined styles load into new documents automatically?

Greetings.
I created a new style for a document. Is there any way to have that style automatically load into every new document I create by default? Or is the only option to import it every time I create a new document? I sure hope you can do the former!
Thanks in advance,
DPL

David Letwin wrote:
Greetings.
I created a new style for a document. Is there any way to have that style automatically load into every new document I create by default? Or is the only option to import it every time I create a new document? I sure hope you can do the former!
Create a new document from the template which you want to use as starting point.
Import the style from your other doc into the newly created one.
Save the new doc as a template.
Use this new template to create your doicuments.
Yvan KOENIG (VALLAURIS, France) samedi 2 avril 2011 18:15:09

Price and Pricing conditions are not copied to PO for a line item !!

Hi
I have created a PO w.r.t a PR which has only one line item.
Now, I add another line item to this existing PO, i get an error message that the Price and Pricing conditions are not copied.
How do i rectify this error !!
Where might be the link for this Price and Pricing conditions to get copied in to this PO ??
MaruthiRam

What kind of PR and in the PO same material you enter for new line or new material and do you have any funcitonal authorization assigned o your user id
please reply

DateField not getting copy in the matrix using Datasource & Datatable

Hello All,
I have tried to copy data From Purchase Order Tables to my own created User Defined Form matrix columns using DBDatasource & Datatables ,Instead of Document Date all other data are getting copied but that document date field is not
getting the data plus it is not showing any error message as such.
Following is the code which i have written :-
=====================================
oPurchase_Amend.DataSources.DataTables.Add("oMatrixDT" )
oPurchase_Amend.DataSources.DataTables.Item("oMatrixDT" ).Clear()
Dim sSQL As String = "SELECT T1.[ItemCode], T1.[Dscription], T1.[Quantity], T1.[Price],(Select InvntryUoM From OITM Where ItemCode=T1.ItemCode) as 'UoM',T1.LineNum,T0.DocNum as 'FrmDate' FROM OPOR T0 INNER JOIN POR1 T1 ON T0.DocEntry = T1.DocEntry WHERE T0.[DocNum] ='1' and T0.CardCode='C0001'
oPurchase_Amend.DataSources.DataTables.Item("oMatrixDT" ).ExecuteQuery(sSQL)
oMatrix = oPurchase_Amend.Items.Item("mtx_0").Specific
oMatrix.Clear()
Dim oDBDataSource As SAPbouiCOM.DBDataSource = oPurchase_Amend.DataSources.DBDataSources.Item("@OSL_POAMD")
Dim oDataTable As SAPbouiCOM.DataTable = oPurchase_Amend.DataSources.DataTables.Item("oMatrixDT" )
oDBDataSource.Clear()
For row As Integer = 0 To oDataTable.Rows.Count - 1
Dim offset As Integer = oDBDataSource.Size
oDBDataSource.InsertRecord(row)
oDBDataSource.SetValue("U_ItemCode", offset, oDataTable.GetValue("ItemCode", row).ToString())
oDBDataSource.SetValue("U_ItemName", offset, oDataTable.GetValue("Dscription", row).ToString())
oDBDataSource.SetValue("U_UoM", offset, oDataTable.GetValue("UoM", row).ToString())
oDBDataSource.SetValue("U_OldQty", offset, oDataTable.GetValue("Quantity", row).ToString())
oDBDataSource.SetValue("U_OldRate", offset, oDataTable.GetValue("Price", row).ToString())
> Line For Copying Document Date Data to the matrix datasource
oDBDataSource.SetValue("U_OldDate", offset, oDataTable.GetValue("FrmDate", row))
oDBDataSource.SetValue("U_LineId", offset, oDataTable.GetValue("LineNum", row))
Next
'--- Rebinding the datasource to the matrix columns -
oMatrix.Columns.Item("col_0").DataBind.SetBound(True, "@OSL_POAMD", "U_ItemCode")
oMatrix.Columns.Item("col_1").DataBind.SetBound(True, "@OSL_POAMD", "U_ItemName")
oMatrix.Columns.Item("col_3").DataBind.SetBound(True, "@OSL_POAMD", "U_OldQty")
oMatrix.Columns.Item("col_5").DataBind.SetBound(True, "@OSL_POAMD", "U_OldRate")
oMatrix.Columns.Item("col_7").DataBind.SetBound(True, "@OSL_POAMD", "U_OldDate")
oMatrix.Columns.Item("col_9").DataBind.SetBound(True, "@OSL_POAMD", "U_LineId")
oMatrix.LoadFromDataSource()
But i am not able to get the document date in the column of the matrix .
Please suggest what changes i have to meke in this code to get the desired output.
Thanks & Regards,
Amit
Edited by: AmitSharma_061985 on Dec 17, 2009 12:24 PM

Hi Michael,
FrmDate is the Document date of the purchase order which i am fetching through sql query and trying to copy that in the matrix
through datasource .
Edited by: AmitSharma_061985 on Dec 18, 2009 7:07 AM

Sub items are not getting copied into excise invoice

Hi Guru's
I am using Sales BOM in my sale order, pricing and inventory are controlled at sub-item level.
I am creating the outbound delivery with reference to sale order and billing document (Commercial Invoice) with reference to outbound delivery.
When I create an excise invoice in J1IIN, subitems are not getting copied from billing document, instead only main item is getting copied along with sum of all the excise duties of subitems. Ex: A is main item (Not relevant for pricing). B and C are subitems with excise duty 10 and 20 respectively. Here A is getting copied with excise duty 30 (10 +30).
When I download the excise register, register is showing all A, B and C items with quantity but it is not showing the corresponding excise duties of subitems. We would like to avail cenvat at sub items.
Kindly suggest me how can I copy subitems into excise invoice from billing document.
Thanks & Regards.
Swamy H P

Hi Lakshmipathi,
Thank you so much for the response.
Yes, I am able to save the outgoing excise invoice(J1IIN) without any errors. It's working fine for normal materials(With out BOM), but for BOM materials even though main item is not relevant for pricing as pricing is controlled at sub items all the excise duties (BED, ECS and S&H cess) of sub items are getting copied to main item while creating the outgoing excise invoice.
I mean excise invoice is showing only main item with all the sub items excise duties. same is getting posted also.
But when I extract and download RG1 register, RG1 report is showing both main item and sub items with quantity but excise duties are not shown.
I debugged and found that excise duties are not flowing to table J_1irg1 from J_1iexcdtl.
Thanks & Regards,
Swamy H P

Duplicate Shopping Cart line items - Supplier doesnt get copied ?

Hi,
we are on SRM7 extended classic scenario and while we use the "Duplicate" option to copy the existing line items in a shopping cart then the supplier doesn't get copied to new line item, field remains blank? is it a standard behaviour?
what are the steps needed to make this happen ? appreciate your help in this regard.
Thanks,
Maverick

Hi
In SRM , if you copy the line item all item data must copy including suppliers.
step by step tell us
like
1 create a shopping cart describe requirement
2. manually assigned a source of supply - assigned a vendor
3. copy the line item into another one
4. in the latest line item supplier was not copied.
The behavior of copying/pasting or duplicating items in a SC is different depending on the status of the SC
Note 1137292 - Inconsistency when duplicating items
Muthu

RFQ Conditions automatically gets copied in new document

Similar Messages

Maybe you are looking for