RHEL 6.4 Gets HeartBeat error, erratic rates, and does not complete runs

Running RHEL 5.9, 6,4, 6.4 OELUEK, Windows 2008 R2, and Windows 2012 R1. Of these OSes, just RHEL 6.4 is giving an error. All the other OSes are passing this test fine giving the expected output. Some other facts are:
Using VDBench 5.03 (also tried 5.04 with same error)
Using jre1.7.0_21 (also tried IBM 1.5, Sun 1.6 versions with VDBench 5.03 & 5.04 which also did not complete)
This is happening for multipe machine types (Dell, IBM, HP). All have RAID 1 with 2 disks with RAID array controller.
Any feedback on what else to examine and ideas to resolve this will be appriecated. Thanks, Sam
The paramater file is
* Data Drive OLTP, size 1m to 1g, 64k transfer size, 70/30 read/write
fsd=fsd1,anchor=/data/perfdata/vdbench/DM-01,depth=1,width=1,files=12,size=(1m,25,100m,25,250m,25,1g,25),openflags=directio
fsd=fsd2,anchor=/data/perfdata/vdbench/DM-02,depth=1,width=1,files=12,size=(1m,25,100m,25,250m,25,1g,25),openflags=directio
fsd=fsd3,anchor=/data/perfdata/vdbench/DM-03,depth=1,width=1,files=12,size=(1m,25,100m,25,250m,25,1g,25),openflags=directio
fsd=fsd4,anchor=/data/perfdata/vdbench/DM-04,depth=1,width=1,files=12,size=(1m,25,100m,25,250m,25,1g,25),openflags=directio
fwd=fwd1,fsd=(fsd1,fsd2,fsd3,fsd4),xfersize=64k,fileselect=random,fileio=random,rdpct=70,threads=32
rd=rd1,fwd=*,fwdrate=max,format=yes,pause=60,elapsed=930,interval=30
rd=rd2,fwd=*,fwdrate=max,format=yes,pause=60,elapsed=930,interval=30
rd=rd3,fwd=*,fwdrate=max,format=yes,pause=60,elapsed=930,interval=30
rd=rd4,fwd=*,fwdrate=max,format=yes,pause=60,elapsed=930,interval=30
rd=rd5,fwd=*,fwdrate=max,format=yes,pause=60,elapsed=930,interval=30
rd=rd6,fwd=*,fwdrate=max,format=yes,pause=60,elapsed=930,interval=30
rd=rd7,fwd=*,fwdrate=max,format=yes,pause=60,elapsed=930,interval=30
Typical output of the problem is (trimming lines to be more readiable)
15:01:53.000 Starting RD=rd1; elapsed=930; fwdrate=max. For loops: None
Mar 11, 2014 .Interval. .ReqstdOps.. ...cpu%... read ....read.... ...write.... ..mb/sec... mb/sec .xfer..
                         rate resp total sys   pct   rate resp   rate resp read write total    size
15:02:23.440          1 784.4 41.03   0.5 0.10 69.6 545.9 54.01 238.6 11.33 34.12 14.91 49.03   65536
15:02:53.057          2 662.2 47.70   0.6 0.11 69.7 461.5 57.86 200.7 24.32 28.85 12.54 41.38   65529
15:03:23.056          3 671.8 47.46   0.6 0.11 69.8 468.7 58.67 203.1 21.60 29.29 12.70 41.99   65536
15:04:32.551          4 704.1 45.57   0.1 0.09 70.2 494.3 59.88 209.8 11.85 30.89 13.11 44.01   65536
15:04:32.570          5 693.1 46.18   0.1 0.08 70.2 486.3 59.45 206.8 14.96 30.40 12.93 43.32   65536
15:04:53.056          6 590.6 54.09   0.6 0.10 70.0 413.2 67.89 177.4 21.95 25.82 11.09 36.91   65536
15:05:23.048          7 712.5 44.83   0.2 0.11 69.6 496.2 60.53 216.3 8.79 31.01 13.52 44.53   65536
15:05:53.053          8 535.4 60.08   0.5 0.09 69.8 373.9 73.32 161.5 29.42 23.37 10.09 33.46   65536
15:06:23.053          9 571.4 55.76   0.6 0.10 69.5 397.4 67.74 174.0 28.39 24.84 10.88 35.71   65536
15:06:53.047         10 692.6 45.40   0.6 0.12 70.7 490.0 57.72 202.6 15.61 30.63 12.66 43.29   65536
15:07:23.053         11 561.2 57.33   0.1 0.08 70.4 395.0 71.35 166.2 24.02 24.69 10.39 35.08   65536
15:07:53.052         12 660.1 48.48   0.6 0.11 70.1 462.5 61.65 197.7 17.68 28.90 12.35 41.26   65536
15:08:23.048         13 576.2 55.33   0.5 0.10 70.1 403.7 67.12 172.5 27.75 25.23 10.78 36.01   65536
15:08:53.053         14 622.8 51.55   0.1 0.09 69.9 435.4 67.91 187.3 13.52 27.21 11.71 38.92   65536
15:09:23.052         15 712.6 44.16   0.1 0.09 70.3 500.6 58.00 212.0 11.47 31.29 13.25 44.54   65536
15:10:03.646         16 673.6 47.23   0.1 0.09 70.2 472.9 60.95 200.7 14.91 29.56 12.54 42.10   65536
15:10:23.052         17 561.4 47.18   0.6 0.11 70.6 396.2 59.54 165.2 17.51 24.76 10.32 35.09   65536
15:10:53.052         18 730.7 43.95   0.1 0.09 69.9 510.8 57.78 219.9 11.85 31.92 13.75 45.67   65536
15:14:37.119 HeartBeat.checkHeartBeat(): slave localhost-0 has not responded for 185 seconds.
15:17:44.961 Start/end command: executing '/banktools/perfbench/vdbench504/vdbench jstack'
15:17:44.962 execute(): /banktools/perfbench/vdbench504/vdbench jstack
15:17:44.977         19 707.8 45.18   0.1 0.08 69.6 492.3 62.26 215.5 6.15 30.77 13.47 44.24   65536   0.0 0.00   0.0 0.00   0.0 0.00   0.5 0.02   0.5 0.02   0.0 0.00   0.0 0.00   0.0 0.00
15:17:45.207 tg: java.lang.ThreadGroup[name=main,maxpri=10]
15:17:45.207 tg.get_name: main
15:17:45.207 tg.activeCount: 7
java.lang.ThreadGroup[name=main,maxpri=10]
    Thread[Vdbmain,5,main]
    Thread[SlaveStarter localhost-10-140311-14.58.51.646,5,main]
    Thread[Get_cmd_stream stderr /banktools/perfbench/vdbench504/vdbench SlaveJvm -m localhost -n localhost-10-140311-14.58.51.646 -l localhost-0 -p 5570,5,main]
    Thread[Get_cmd_stream stdout /banktools/perfbench/vdbench504/vdbench SlaveJvm -m localhost -n localhost-10-140311-14.58.51.646 -l localhost-0 -p 5570,5,main]
    Thread[SlaveOnMaster,10,main]
    Thread[Slave HeartBeat,5,main]
    Thread[Reporter,10,main]
15:17:45.208 tl            [Ljava.lang.Thread;@58093139
15:17:45.208 tl[]:         Thread[Vdbmain,5,main]
15:17:45.208 tl[].isalive: true
15:17:45.208 Threadname:   Vdbmain
15:17:45.209 dumpOneStack: java.lang.Thread -2
15:17:45.209 dumpOneStack: java.lang.Thread 340
15:17:45.209 dumpOneStack: Vdb.common 383
15:17:45.209 dumpOneStack: Vdb.common 367
15:17:45.209 dumpOneStack: Vdb.Vdbmain 784
15:17:45.209 dumpOneStack: Vdb.Vdbmain 572
15:17:45.209 tl            [Ljava.lang.Thread;@58093139
15:17:45.209 tl[]:         Thread[SlaveStarter localhost-10-140311-14.58.51.646,5,main]
15:17:45.209 tl[].isalive: true
15:17:45.209 Threadname:   SlaveStarter localhost-10-140311-14.58.51.646
15:17:45.209 dumpOneStack: java.lang.Object -2
15:17:45.209 dumpOneStack: java.lang.Object 503
15:17:45.209 dumpOneStack: java.lang.UNIXProcess 210
15:17:45.209 dumpOneStack: Utils.OS_cmd 304
15:17:45.209 dumpOneStack: Utils.OS_cmd 234
15:17:45.209 dumpOneStack: Vdb.SlaveStarter 208
15:17:45.209 dumpOneStack: Vdb.SlaveStarter 157
15:17:45.210 dumpOneStack: Vdb.SlaveStarter 50
15:17:45.210 tl            [Ljava.lang.Thread;@58093139
15:17:45.210 tl[]:         Thread[Get_cmd_stream stderr /banktools/perfbench/vdbench504/vdbench SlaveJvm -m localhost -n localhost-10-140311-14.58.51.646 -l localhost-0 -p 5570,5,main]
15:17:45.210 tl[].isalive: true
15:17:45.210 Threadname:   Get_cmd_stream stderr /banktools/perfbench/vdbench504/vdbench SlaveJvm -m localhost -n localhost-10-140311-14.58.51.646 -l localhost-0 -p 5570
15:17:45.210 dumpOneStack: java.io.FileInputStream -2
15:17:45.210 dumpOneStack: java.io.FileInputStream 272
15:17:45.210 dumpOneStack: java.io.BufferedInputStream 273
15:17:45.210 dumpOneStack: java.io.BufferedInputStream 334
15:17:45.210 dumpOneStack: sun.nio.cs.StreamDecoder 283
15:17:45.210 dumpOneStack: sun.nio.cs.StreamDecoder 325
15:17:45.210 dumpOneStack: sun.nio.cs.StreamDecoder 177
15:17:45.211 dumpOneStack: java.io.InputStreamReader 184
15:17:45.211 dumpOneStack: java.io.BufferedReader 154
15:17:45.211 dumpOneStack: java.io.BufferedReader 317
15:17:45.211 dumpOneStack: java.io.BufferedReader 382
15:17:45.211 dumpOneStack: Utils.Get_cmd_stream 640
15:17:45.211 tl            [Ljava.lang.Thread;@58093139
15:17:45.211 tl[]:         Thread[Get_cmd_stream stdout /banktools/perfbench/vdbench504/vdbench SlaveJvm -m localhost -n localhost-10-140311-14.58.51.646 -l localhost-0 -p 5570,5,main]
15:17:45.211 tl[].isalive: true
15:17:45.211 Threadname:   Get_cmd_stream stdout /banktools/perfbench/vdbench504/vdbench SlaveJvm -m localhost -n localhost-10-140311-14.58.51.646 -l localhost-0 -p 5570
15:17:45.211 dumpOneStack: java.nio.charset.CoderResult 120
15:17:45.211 dumpOneStack: sun.nio.cs.StreamDecoder 318
15:17:45.211 dumpOneStack: sun.nio.cs.StreamDecoder 177
15:17:45.211 dumpOneStack: java.io.InputStreamReader 184
15:17:45.212 dumpOneStack: java.io.BufferedReader 154
15:17:45.212 dumpOneStack: java.io.BufferedReader 317
15:17:45.212 dumpOneStack: java.io.BufferedReader 382
15:17:45.212 dumpOneStack: Utils.Get_cmd_stream 640
15:17:45.212 tl            [Ljava.lang.Thread;@58093139
15:17:45.212 tl[]:         Thread[SlaveOnMaster,10,main]
15:17:45.212 tl[].isalive: true
15:17:45.212 Threadname:   SlaveOnMaster
15:17:45.212 dumpOneStack: sun.nio.ch.FileDispatcherImpl -2
15:17:45.212 dumpOneStack: sun.nio.ch.FileDispatcherImpl 60
15:17:45.212 dumpOneStack: sun.nio.ch.IOUtil 93
15:17:45.212 dumpOneStack: sun.nio.ch.IOUtil 65
15:17:45.212 dumpOneStack: sun.nio.ch.FileChannelImpl 205
15:17:45.212 dumpOneStack: Utils.Bin 759
15:17:45.212 dumpOneStack: Utils.Bin 853
15:17:45.212 dumpOneStack: Vdb.FwdStats 668
15:17:45.212 dumpOneStack: Vdb.FwdReport 92
15:17:45.213 dumpOneStack: Vdb.CollectSlaveStats 415
15:17:45.213 dumpOneStack: Vdb.CollectSlaveStats 320
15:17:45.213 dumpOneStack: Vdb.SlaveOnMaster 113
15:17:45.213 dumpOneStack: Vdb.SlaveOnMaster 42
15:17:45.213 tl            [Ljava.lang.Thread;@58093139
15:17:45.213 tl[]:         Thread[Slave HeartBeat,5,main]
15:17:45.213 tl[].isalive: true
15:17:45.213 Threadname:   Slave HeartBeat
15:17:45.213 dumpOneStack: java.lang.Thread 1588
15:17:45.213 dumpOneStack: Vdb.common 1633
15:17:45.213 dumpOneStack: Vdb.common 1627
15:17:45.213 dumpOneStack: Vdb.HeartBeat 78
15:17:45.213 tl            [Ljava.lang.Thread;@58093139
15:17:45.213 tl[]:         Thread[Reporter,10,main]
15:17:45.213 tl[].isalive: true
15:17:45.213 Threadname:   Reporter
15:17:45.214 dumpOneStack: java.lang.Object -2
15:17:45.214 dumpOneStack: Utils.Semaphore 168
15:17:45.214 dumpOneStack: Vdb.CollectSlaveStats 489
15:17:45.214 dumpOneStack: Vdb.Reporter 189
15:17:45.214
15:17:45.214 Heartbeat monitor: One or more slaves did not respond
15:17:45.214
java.lang.RuntimeException: Heartbeat monitor: One or more slaves did not respond
        at Vdb.common.failure(common.java:308)
        at Vdb.HeartBeat.run(HeartBeat.java:79)

Thanks for the tips. This is what has been done.
1) Ran adding fsd=defaulf,workingsetsize=16 (since 64 GB machine and 4 FSDs), which failed.
2) Removing the openflag=directio, it ran in spurts (faster and slower) which ran longer but then failed.
3) Did a run, origial options, with vmstat & iostat reporting every 5 seconds. In that noticed an increase in CPU an decrease in IO rate until VDBench gave an error.
I was unable to upload images with Excel graphs, so have the summary below. Thanks for looking at this.
CPU
sda
dm-7
Remarks
Time
%user
%nice
%system
%iowait
%steal
%idle
Time
tps
MB_read/s
MB_wrtn/s
MB_read
MB_wrtn
Time
tps
MB_read/s
MB_wrtn/s
MB_read
MB_wrtn
5:52:50
2.38
0
0.17
0
0
97.45
5:52:50
2.2
0
0.02
0
0
5:52:50
0
0
0
0
0
VDBench Start
5:52:55
1.3
0
0.64
0.26
0
97.8
5:52:55
433.6
0
42.99
0
214
5:52:55
553.8
0
43.9
0
219
Starting
RD=format_for_rd1
5:53:00
0.05
0
0.14
18.04
0
81.76
5:53:00
1014
0
113.22
0
566
5:53:00
1310.8
0
113.08
0
565
5:53:05
0.09
0
0.13
17.52
0
82.26
5:53:05
994.4
0
111.4
0
557
5:53:05
1294.6
0
111.4
0
557
5:53:10
0.03
0
0.16
16.1
0
83.72
5:53:10
992
0
112.06
0
560
5:53:10
1259
0
112.02
0
560
5:53:15
0.01
0
0.14
16.71
0
83.13
5:53:15
987.4
0
111.61
0
558
5:53:15
1252.2
0
111.44
0
557
5:53:20
0.07
0
0.14
16.34
0
83.44
5:53:20
1006
0
111.54
0
557
5:53:20
1297.2
0
111.32
0
556
5:53:25
2.8
0
0.29
14.65
0
82.26
5:53:25
986.4
0
112.87
0
564
5:53:25
1265.6
0
112.7
0
563
5:53:30
0.02
0
0.13
14.72
0
85.14
5:53:30
779.2
0
84.18
0
420
5:53:30
1024.8
0
84.24
0
421
5:53:35
0.03
0
0.11
13.13
0
86.73
5:53:35
687
0
77.48
0
387
5:53:35
907.8
0
77.47
0
387
5:53:40
0.03
0
0.13
13.49
0
86.35
5:53:40
726.2
0
83.77
0
418
5:53:40
946.2
0
83.76
0
418
5:53:45
0.03
0
0.15
11.37
0
88.45
5:53:45
930
0
102.99
0
514
5:53:45
1205.4
0
102.92
0
514
5:53:50
0.05
0
0.12
11.45
0
88.38
5:53:50
653.2
0
76.02
0
380
5:53:50
873.4
0
76.01
0
380
5:53:55
0.54
0
0.15
14
0
85.31
5:53:55
686.4
0
76.67
0
383
5:53:55
884.4
0
76.54
0
382
5:54:00
2.99
0
0.28
15.18
0
81.54
5:54:00
751.2
0
85.88
0
429
5:54:00
985
0
85.71
0
428
5:54:05
0.96
0
0.13
13.88
0
85.03
5:54:05
800.2
0
85.45
0
427
5:54:05
997.4
0
84.88
0
424
5:54:10
0.56
0
0.16
13.28
0
86
5:54:10
925.8
0
88.16
0
440
5:54:10
1015.6
0
86.02
0
430
5:54:15
0.02
0
0.11
10.02
0
89.86
5:54:15
854.4
0
73.46
0
367
5:54:15
1010.4
0
72.84
0
364
5:54:20
0.02
0
0.13
8.18
0
91.67
5:54:20
848.8
0
95.29
0
476
5:54:20
1067.4
0
95.26
0
476
5:54:25
0.14
0
0.11
8.26
0
91.49
5:54:25
506.6
0
56.35
0
281
5:54:25
647.2
0
56.34
0
281
5:54:30
0.02
0
0.13
7.78
0
92.08
5:54:30
740
0
82.9
0
414
5:54:30
925.4
0
82.8
0
413
5:54:35
2.35
0
0.26
8.1
0
89.29
5:54:35
943.2
0
106.95
0
534
5:54:35
1205.4
0
106.93
0
534
5:54:40
0.36
0
0.18
10.88
0
88.57
5:54:40
898.6
0
100.75
0
503
5:54:40
1145.2
0
100.63
0
503
5:54:45
0.03
0
0.16
9.81
0
90
5:54:45
856.8
0
96.83
0
484
5:54:45
1093.4
0
96.8
0
484
5:54:50
0.06
0
0.13
9.82
0
89.99
5:54:50
980.4
0
92.57
0
462
5:54:50
1206.8
0
92.52
0
462
5:54:55
0.23
0
0.12
8.68
0
90.97
5:54:55
706.4
0
79.35
0
396
5:54:55
901
0
79.34
0
396
5:55:00
0.02
0
0.13
7.34
0
92.51
5:55:00
966.4
0
109.26
0
546
5:55:00
1225
0
109.25
0
546
5:55:05
0.04
0
0.21
9.38
0
90.36
5:55:05
931
0
104.74
0
523
5:55:05
1185.4
0
104.68
0
523
5:55:10
2.12
0
0.26
9.21
0
88.42
5:55:10
922.2
0
103.49
0
517
5:55:10
1176
0
103.38
0
516
5:55:15
0.56
0
0.16
9.37
0
89.91
5:55:15
852.8
0
95.87
0
479
5:55:15
1081.8
0
95.65
0
478
5:55:20
0.03
0
0.16
9.42
0
90.4
5:55:20
872
0
98.11
0
490
5:55:20
1102
0
98.05
0
490
5:55:25
0.18
0
0.14
8.99
0
90.69
5:55:25
927.2
0
84.23
0
421
5:55:25
1137.8
0
84.16
0
420
5:55:30
0.03
0
0.11
9.29
0
90.57
5:55:30
879.8
0
99.34
0
496
5:55:30
1122.8
0
99.35
0
496
5:55:35
0.02
0
0.14
8.05
0
91.8
5:55:35
878
0
98.93
0
494
5:55:35
1116.8
0
98.9
0
494
5:55:40
0.05
0
0.13
7.43
0
92.39
5:55:40
922.4
0
103.69
0
518
5:55:40
1170.6
0
103.66
0
518
5:55:45
1.89
0
0.22
7.36
0
90.53
5:55:45
737.6
0
83.7
0
418
5:55:45
945.6
0
83.68
0
418
5:55:50
0.81
0
0.18
7.64
0
91.37
5:55:50
885
0
98.97
0
494
5:55:50
1122.6
0
98.84
0
494
5:55:55
0.07
0
0.13
6.73
0
93.07
5:55:55
964.6
0
91.49
0
457
5:55:55
1185.2
0
91.22
0
456
Starting RD=rd1
5:56:00
0.24
0
0.17
3.5
0
96.09
5:56:00
718.4
0
80.52
0
402
5:56:00
902
0
80.22
0
401
5:56:05
0.64
0
0.14
3.79
0
95.43
5:56:05
1016
41.73
18.6
208
93
5:56:05
1170.6
42.12
18.59
210
92
5:56:10
0.09
0
0.09
6.04
0
93.78
5:56:10
884
37.07
15.87
185
79
5:56:10
990.2
37.06
15.87
185
79
5:56:15
0.06
0
0.06
8.27
0
91.61
5:56:15
517.4
22.26
9.07
111
45
5:56:15
587.2
22.16
9.15
110
45
5:56:20
1.68
0
0.15
8.39
0
89.78
5:56:20
558.2
22.69
10.91
113
54
5:56:20
643.6
22.7
10.88
113
54
5:56:25
0.99
0
0.13
8.92
0
89.96
5:56:25
597
24.41
11.36
122
56
5:56:25
680.4
24.51
11.19
122
55
5:56:30
0.03
0
0.11
7.75
0
92.12
5:56:30
842.8
35.72
15.21
178
76
5:56:30
956.6
35.71
15.3
178
76
5:56:35
0.06
0
0.08
12.53
0
87.34
5:56:35
513.4
22.46
8.62
112

Similar Messages

I have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this?

i have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this

Try downloading the trial. It ought to detect that you have a 64-bit system.
You aren't using Vista, are you? PSE 13 requires at least win 7 and I think a few folks with vista have gotten a similar error message on trying to install it.

I keep getting this error message "Time Machine could not complete the backup. 'The backup disk image "/Volumes/FreeAgent Drive/MacBook Pro.sparsebundle" is already in use." What should I do to remedy this?

I keep getting this error message: Time Machine could not complete the backup. 'The backup disk image "/Volumes/FreeAgent Drive/xxx MacBook Pro.sparsebundle" is already in use.
How do I remedy this so it starts backing up again?

Maybe this http://web.me.com/pondini/Time_Machine/C12.html can help you.
Stefan

I keep getting the error message Apple ID does not have permission to access iTunes Connect. please explain why?

Question:
I try to log into my itunes connect acct and I I still keep getting the error message
Apple ID does not have permission to access iTunes Connect.
please explain why?

PS I have also read all of the old postings in regards to this and nothing is working.

Why do I get the error "The target GatherAllFilesToPublish does not exist"?

I have recently installed the new Azure development tools for Visual Studio 2010 service pack 1. Every time that I try to publish an existing website (using file system deployment) I get the following error:
The target "GatherAllFilesToPublish" does not exist in the project.
Can anyone tell me what I am missing?
Thanks

Followed the suggestion from Yuri without success,
then I found the tag at end of config file as shown bellow to
<TargetName="MvcBuildViews"AfterTargets="AfterBuild"Condition="'$(MvcBuildViews)'=='true'">
and I changed to
<TargetName="GatherAllFilesToPublish"AfterTargets="AfterBuild"Condition="'$(MvcBuildViews)'=='true'">
so, it started deploying to file system as before I install the Azure SDK 2.2.
Bjunio

HT1551 When streaming a movie or tv show it stops after a short time and does not complete the streaming. comes up as an error occurred loading this content try again later

When Streaming a movie or tv show it stops after a short time and does not finish downloading. We watch the TV show or movie than nothing !!!
a message comes up An error occurred loading this content try again later. We have unplugged everything rebooted several times and nothing
helps. It was working fine until we did a upgrade that showed up on the Apple TV.
modle A1427 3rd generation
Any help would be GREATLY appreciated Nothing on regular TV miss my Apple TV stuff !!!!

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router.
Reset the Apple TV (Settings > General > Reset > Reset all settings)
Restore the Apple TV (Settings > General > Reset > Restore)

New black cartridge doesn't work. I get no error messages, it simply does not print in black.

As stated above, the printer simply doesn't print in black. It's a new cartridge. Not my first rodeo, I've replaced that cartridge several times, so I know how to do it. I get no error messages. When checking the ink level, it registers as full. What's up with that?
This question was solved.
View Solution.

Hi, for the OJ 6500 try the steps in the link below...
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01641815
Failing that, if the printer is out of warranty one thing that might be worth a shot is soaking the printhead...
1) Get a pan and put 1/2" of very hot (not boiling) water in the bottom.
2) Next remove all the ink cartridges, then remove the printhead assembly.
3) Gently put the printhead nozzles down in the water and let it soak for five minutes.
4) Remove the printhead and gently dry the electrical contacts.
5) Put the printhead back in the printer and then reinstall the ink cartridges.
http://h30434.www3.hp.com/t5/Ink-Toner-Cartridge-Printhead-Issues/HP-6500-Office-jet-E709a-Black-pri...
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

My Applications folder and Mac HD is gone from finder and cannot locate it anywhere. Also now getting download errors on everything and they cannot complete. This happened with iPhoto tonight. Any ideas?

I don't realize when this started because I don't download apps that often or look for my applications folder. But I cannot find my HD anywhere. I know it has been less than two-three weeks since the last time I specifially accessed the applications folder. Its odd because tonight I tried downloading iPhoto and got an error that it was unable to download ... try again from the app store. I did this twice with the same result. Any help would be appreciated.
Thank you.

Basically I ended up bringing the MacBook into the Apple Store. It was determined something was going wrong with my hard drive and I ended up getting a new MacBook because I could not wait for it to be fixed (I was already starting to get behind on my school work). There was no real solution.

Why do I get this error message "This volume does not support permanent version storage."

I get this error message when I save a "pages 09" document edited on my macbook pro but saved to my mac mini (over a wifi network). All my Macs are running 10.9.3. My Mac mini is using time machine to back up to a separate hard drive (USB 3 connection). I Tried using Page 5.2 but it is a disaster over my network, slow, crashes, creates random folders....

According to Apple network volumes do not support built in 'versions'…
OS X Server: "The document 'file name' is on a volume that does not support permanent version storage" alert
If in doubt Google the error text with any personal info removed.
Work on it locally & copy it to the network daily if you need versions, otherwise use a real 'version control system' that you have some actual control over like GIT. It is designed for code projects, but you can cram anything in if you really want.
http://www.git-scm.com
I suspect Apples file format will make it miserable with Pages, but there are some great Mac GIT apps.
Using Time Machine would be probably be suffice (run it on the Mac you use as the server & then restore versions on that Mac).

I keep getting this error message: Time Capsule could not complete the backup. The backup disk image "/Volumes/Time Capsule/Karla Laura Smith's MacBook Pro. sparse bundle" could not be assessed (error -1). Tried restarting etc. Please help.

I keep receiving this message.
Time Machine could not complete the backup.
The backup disk image "/Volumes/Time Capsule/Karla Laura Smith's MacBookPro.sparsebundle" could not be accessed (error -1).
Can anyone help me clear this annoying message up? Thanks for advance....

The unplugging was of power, if you were unplugging ethernet .. that will not do anything.
The issue is explained here.
C17 http://pondini.org/TM/Troubleshooting.html
If a restart of the TC is not adequate you maybe in the 2% that has other issues.. please try a full network restart in correct order.. with everything off.. modem.. then TC.. then clients.. with 2min gap to allow modem and TC to finish boot process.

I have been trying to install the new iTunes, and i get an error that a program could not be run.

I have an old version of iTunes and require the new version to connect my IPod. A program can not be run and the installation stops. I have no idea what program or what is required to run it. Please Help.

That would be my first guess. You might be trying to install the 32 bit version of the program.
Update the thread with more info on your apple software etc if its a 64 bit install you're trying to perform.

Cannot install Firefox on new HP running windows 7. After it extracts file I get this error message: specific path does not exist

It then goes on to say, check path and try again. I created the file path and soon realized that it changes the name of the path each time.
Example path:
c:\\Users\Karen\AppData\Local\Temp\7zSCAD.tmp\setup.exe
Running windows 7, 64 bit and was trying to download the new Firefox 7. When that didn't work I tried an older version and received the same message.
I loved Firefox on my old computer which was running XP. I hope that there is a fix for this.
Thanks!
Karen

Thanks for the help...worked like a charm! :D

Error Message** This file does not appear to be a photshop file

Okay.. so I have been researching forums and have seen this message throughout, my issue seems to be slightly different. When I am in Encore CS3 and trying to create a menu, I import my background designed in photoshop, have the buttons set up correctly, test it in the preview screen and everything works correctly, the file is recognized as a psd file, and even saves as a project in encore. When I go to build my DVD I get an error saying "This file does not appear to be a photoshop file, although when I check the properties it recognizes it as a psd.. any suggestions?

Adam,
Not sure that I understand this message:
And Actually yes I do have a circle in my button to play now.
Can you enlighten me a bit. Does this mean that En has accepted the PSD, or something else.
If something else, I would also look closely at the Layers in the PSD. While I do not recall very small Layers creating an issue in En, they have been known to do so in PrPro. This is often something like a very small logo, on a Layer by itself, with nothing but transparency around it. In PrPro, a message, similar to yours is offered up, but that is in Import, and you got it only with the Build.
Too bad that the Check Project function is not a full pre-flight test of all Assets, like in InDesign, but it falls short, as it only checks for DVD-compliance in the navigation. I've filed Feature Request for more, but since En is built on the Sonic AuthorCore modules, I suppose that it's not as easy, as I would have hoped for.
Good luck, and help me understand the above,
Hunt

Input File repository server Error: The requested directory does not exist.

Hi,
Getting following error "The requested directory does not exist." for Input and Out put file repository server.
The specfied directory exists and the user has local administrative privelges with full control of the IFRS and OFRS location.
The location was earlier working and after trying to implement Windows AD the things stopped. Have tried reverting the things but the following issue still persists.
Thanks,
Manpreet

@Siva,
I am not using the defacult FRS, I have specfied a specfic location on which the user has full control.
this was working prior to the Windows AD setup tried by me.

Error the entered value does not match the specified field type

Hi,
When I try to insert a null value to a field of the User Defined Table I am getting the error "The entered value does not match the specified field type" in SAP Business One version 2007 PL 42.
Any help would be appreciated.
Thanks in advance.
Sudha.

Hi Sudha,
It probably have to do with how you defined the field.
Is Null value allowed?
What are the field definitions?
Thanks,
Jesper

RHEL 6.4 Gets HeartBeat error, erratic rates, and does not complete runs

Similar Messages

Maybe you are looking for