Ridiculous errors in "extcode.h"

Hi everyone,
I have a problem in Labwindows/Cvi. I created a dll in Labview 7.1, and I have to use this dll in my another project in Labwindows/Cvi. But after adding the .lib, .dll and .h files belonging to the dll to my project, I am getting far out errors in "extcode.h" which is included in the .h of the dll. Really unbelievable errors, because it is written that;
"extcode.h"(431,45)   syntax error; found '<' expecting ')'.
"extcode.h"(431,45)   Missing identifier.
For these lines in "extcode.h"
#if !Palm
TH_REENTRANT int32           Abs(int32);
TH_REENTRANT int32           Min(int32, int32);
TH_REENTRANT int32           Max(int32, int32);
TH_REENTRANT int32           Pin(int32, int32, int32);
TH_REENTRANT Bool32           IsDigit(uChar);
Like these, there are 20 errors and most of them are about the lines above there which are completely right. Actually, this header file belongs also to Labwindows.
Should I change the build options, or something like this, or am I doing something wrong during the linking process of the dll to the project? Does anyone have an idea? If yes, I would be really appreciated.
Thanks,
Burcu
Burcu

I am attaching a modified version of Andy CVI project that may help solving your problems. On one hand I have saved UIR file under CVI 7 so you should be able to open it with your ide. On the other hand I have reworked a little the source code to eliminate some errors similar to those you are finding while compiling your code. I had some compiling errors on Min and Max functions previously defined and found that those functions are defined twice, once in toolbox.h and the second in extcode.h, but in the last file they are defined as _FUNCC which on windows systems defaults to _cdecl while in toolbox.h they are defined as CVIFUNC which defaults to _stdcall. May toolbox.h be included in your project either directly or referenced by some of your code? If so, you may see if it is really necessary and if so you could move that part of your code that uses the LV dll into another source file in which you #undef those macro before #including extcode.h.
I hope this may help you to solve your problems.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?
Attachments:
User Interface Application.zip ‏5 KB

Similar Messages

How can I fix this ridiculous error code 13014? It's driving me insane!

Ok, so I have seen a lot of people write about this error code and I feel like I have tried pretty much everything to stop it from happening but nothing works! Every couple of minutes or so when my 120gb iPod classic is plugged in the error message 13014 pops up, the constant bouncing of iTunes in the docking station is driving me insane. All the music syncs onto it fine though. I have my iPod on manually add music as I am using a different computer that doesn't have all the music from my iPod on it. I don't want to risk losing all the music on there, so I'm hoping restoring my iPod is not the only solution to this! Please help me before I murder iTunes. Thanks.

Try removing their iTunes preferences file, which is located in the /username/Library/Preferences/ folder and is called "com.apple.iTunes.plist" ( rename or move it somewhere else)
reboot the Mac
then relaunching iTunes (it will create a new plist)
Connect the iPod Classic directly to the Mac.

Blackberry 10 Navigator ridiculous errors for Non-English languages

Last week I had the chance of thoroughly testing the navigator during my one week vacation. I'm a Dutch speaking Belgian with a BB10 Q5 with Dutch language selected. While driving to the French speaking part of my country I noticed that the voice announced all instructions in Dutch but switches over to French for the road names and numbers. While leaving the French speaking parts and going in to the German part, same thing happens in German. This is quite ridiculous and my language prefs should stay in my selected language, no matter where I drive.
This got me thinking: it would mean if I use the navigator in Greece, every road number would be stated in Greek. I know enough French and German to get by, but the navigator would be totally useless in countries of which I don't speak the language. I've been looking out for an offline GPS navigator for BB10, but did not find any suitable replacement. Have others experienced this behavior?

Lena,
The workaround is a bit ugly because you don’t get any useful feedback in the marker dialog, but it works. The following images (made with FrameMaker 7.2) show the marker dialog before and after clicking "Edit Marker"
and the appearance in a List Of Markers document with visible special characters in a wide and in a narrow column.
In the wide column you can see the special symbol which is the placeholder for the discretionary hyphen. If this does not appear, try to reenter \x04 in the dialog.
- Michael

Rhythmbox cannot import files; gives ridiculous error

When I try to import the contents of my Music folder in Rhythmbox, it is unable to append any of the OGG, M4A, or MP3 files in said folder to its library. The error it gives (for each and every file) is "The file is not an audio stream: [file]". I've tried importing individual files, and directories within my Music folder, but I get the same error no matter what. :?

I think the issue has resolved, though not sure how. In the right-side panel, I could see all the files I have tried to import over the last week, but the folder names were in italics. I think I imported from there, somehow, and now I have a duplicate 2014 subfolder inside my original 2014 folder in the left-side panel. The photos I was trying to import are there now, and everything else I have tried to import is now going into that new 201 subfolder. So, I think you were right but I don't know enough about the ins and outs of Lightroom to understand how to follow your instructions. So, things are importing now, but into the new 2014 subfolder. I can't seem to get them to import into my original 2014 folder. I just wish I knew what I did to cause this!

Syslinux spits out ridiculous error message

When I try to put syslinux on my USB stick ('syslinux -s /dev/sda1'), I get this error:
unkown filesystem type msdos
I'm pretty sure this shouldn't happen - syslinux is designed to boot off of FAT (i.e. MSDOS) filesystems, and /dev/sda1 is formatted FAT16. What is happening here?
Edit: FWIW I have mtools installed, it does not seem to help.

Thanks but that wasn't the problem... It turns out I was supposed to use te binary in the syslinux-$version/mtools directory, not the one in the unix dir. Kind of oddball naming but what the heck, it works now.
(I wasn't using the PKGBUILD because I had to do this from within Frugalware... Got SLAX working now though, so I can ditch the damned floppies and reinstall with archbootstrap. Getting my BIOS to support USB at a decent speed is up next, if I can pull it off without frying anything. )

Itunes refuses to recognise my ipad telling me that i need to uninstall itunes and reinstall the itunes 64bit version for windows - i am on windows 7 and all was working fine until suddenly for no reason at all itunes had some apple support error

I have windows 7 and all has been fine until 2 days ago when suddenly i turned on my laptop and i got some error message about some apple support program error - i didnt tkae notice of it only that i couldnt run itunes, so i uninstalled and reinstalled itunes and it now runs as normal, but now it wont recognise my ipad saying that 64bit version is not installed - WHAT RUBBISH IS THIS? i downloaded and installed the 64bit version from applie and yet the error persists - can some one please tell me how i can get itunes to recognise my ipad again - this seems like such a ridiculous error for these two apple products to be conflicting with each other - please help

well i have found that i needed to not just uninstall itunes, but also apple mobile device support, bonjour apple software update and apple application support - uninstall all these and then install itunes - that seesm to have fixed it, though now i am sync fail - that's a different matter perhaps

File not found error (no error number or file identified)

Hi,
I am getting a file not found error when trying to render a project. The message box does not identify which file is not found nor is there an error message number. I by trial and error tracked the file to a video connected to the PAL_Projector Menu. It is the PAL_Projector.m2v file. I reconnected it but it still gives a file not found error on render. Any suggestions and why do we get these ridiculous error messages in this day and age. The message should identify the file and how to fix the problem.
Regards
Richard

gday
Is the error on the client or server?
What role in the application does applications-mapping.xml fulfill?
How are you loading the file in?
-steve-

W7 Ultimate 32 bit English - error upon iso download that ENGLISH is not supported

I have a legitimate Windows 7 Ultimate 32 bit English DVD with product key sticker inside.
My computer however has no DVD player, so I figured I would download the ISO and create a bootable USB key for install.
Where can I download Windows 7 ISO? I have a Product Key.
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/where-can-i-download-windows-7-iso-i-have-a/7d964b05-2be9-4800-bc7f-3ca30356fc3d?auth=1
Welcome to Microsoft Software Recovery
http://www.microsoft.com/en-us/software-recovery
When I select to verify my key I get this ridiculous error that ENGLISH is not supported....
Unsupported language error: The language you've selected is not available for the product you are eligible for. Please select a different language.
Is there a different site from which I can download a clean Microsoft copy of the ISO?
Alternatively I guess I could take the DVD and make an ISO from it on a different computer and create the usb bootable drive.
Suggestions are appreciated.
Since there are two DVDs (one 32 and one 64 bit) I tried to download the 64 bit one. Same error upon validation of key. Sigh.

Andy
The frist link was from 2012 and no longer applies. The second should work as long as it is not an OEM key. To try and figure this out please follow these instructions
Post your issue to the Windows 7 Genuine Issues forum. Here are the instructions on how to produce a diagnostic:
MGA
Diagnostic Report:
To properly analyze and solve problems with Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
Once downloaded, run the tool.
Click on the Continue button, after a short time, the Continue button will change to a Copy button.
Click on the Copy button in the tool (ignore any error messages at this point), and then paste (using either r-click/Paste, or Ctrl+V ) into your post.
One
Issue Per Thread:
Most Activation and Validation issues look the same, on the surface, but can have many different causes and fixes. This is why we ask for a diagnostic report and this is also why we ask that you create your own thread for your issue (in other words,
don't post your issue in another person's thread).
It just becomes too complicated to try to troubleshoot multiple different issues in the same thread.
Instructions
by Kamin of Ressik
Wanikiya and Dyami--Team Zigzag

Hot to pass error in Dynamic link library

Hi...
I ma trying to write dll in C++ and calling them in Labview through Labview, below is the test programme to pass error,
#include "extcode.h"
typedef struct
    char status;
    int code;
    unsigned char source[10];
} er;
_declspec(dllexport)unsigned long int error(er* error);
_declspec(dllexport)unsigned long int error(er* error)
    error->status=TRUE;
     error->code=10;
   error->source ="Error";
    return 1;
when i run this dll through labview i get error,please suggest way to do this,
Warm Regards
Orooj Ahmed

What error? How have you configured the Call Library Function Node?

The dreaded "an error occurred" message shows on *every* YouTube video

For the past ... I really don't know how long now, most of the time I just gave up, but I'm finally fed up with it ... YouTube has been displaying "An error occurred, please try again later" on any video I try to play; embedded or on YouTube, it doesn't matter.
Safe mode does not resolve the problem.
The only way I can get it to work is by (1) using a separate, clean Firefox profile (-no-remote -profile "x:\path\to\clean\profile"), (2) trying a different browser or (3) completely resetting Firefox (I manually backed up my main profile directory before doing this).
But: copy pasting the URL into a different profile or browser for every video is a pain in the arse and resetting Firefox is not an acceptable solution. I have a ton of customized extensions that would take hours to reconfigure. And, as I mentioned, safe mode (ie.: disabling the extensions) does not fix the problem.
Has anyone actually got to the root cause of this ridiculous error?

This had been happening to me too for ages and nothing made a difference... until I read a few lines on a forum somewhere that solved it in an instant...
YT started using Dynamic Adaptive Streaming over HTTP (dash) a few years ago and this is what's causing the problems. You can download a script called Youtube Center that allows you to turn off dash : https://github.com/YePpHa/YouTubeCenter/wiki
Or, as I found, you can simply plug in a set of headphones into your pc (or use a set of speakers) and that ever present and hugely annoying "an error occurred" message will be gone from your life forever.
;-)

How to remove "Read Only" attribute on folders

Hi
I am logged in with my User account which has full control over my folders.<o:p></o:p>
I have a folder that I tried to add modifications to, however i could not do so because the folder was classified as read only. I have full permissions to this folder. Previously the app that
uses this folder could write to it quite happily, but today it fails. <o:p></o:p>
The 'attributes' for the folder shows a solid square in the read-only box. If I 'un-box' the read-only and apply > ok, when I look at the attributes again the box is still checked.<o:p></o:p>
So my question is, if it's not (which it shouldn't be) some sort of protected Windows folder, and I have full permissions on the folder (supposedly), why does Windows not respect my wishes,
get out of the way, and let me set it to what I want it to be?<o:p></o:p>
I have tried the following methods to fix this issue, but none of them work:<o:p></o:p>
-Adjusting permissions and control, and changing security options<o:p></o:p>
-Using a third party application such as "clear read only" to remove the check on the box<o:p></o:p>
-Using the "attrib" function on the CMD prompt<o:p></o:p>
-Boot Scan for virus/malware that is affecting folder attributes<o:p></o:p>
-Running applications and CMD as administrator<o:p></o:p>
I have heard that if using a NTFS harddrive, then all folders will be automatically “Read Only” and that it is impossible to change that attribute. I find this hard to believe, as all folders
should have some way of being modified, regardless of what HDD I’m using. I obviously cannot change to FAT32, so how else can I get my folders to get rid of this ridiculous error!
<o:p>I have also noticed that this problem is very common amongst Windows users. If this problem has been around for a while, how is it possible that no solution has presented itself.
Regardless, we need a solution to it, because i can't do the things i need to while the Read Only attribute remains a constant on my folders. I thought it may be a virus, but my avast anti-virus did not pick up any infected areas when the scan was done. I
have searched the internet, and no "fix" has solved this issue. The only fix i have not found is a reg edit that could completely remove this read only attribute from all folders. Though i feel this is not neccesary, as i only need the attribute
to be removed from certain folders. Please kindly assist me with this issue, hopefully it will help many others too...</o:p>
Many thanks.

Have you taken ownership of the folder? Please first take ownership of the folder, then change the security options
Take Ownership of a File or Folder
http://technet.microsoft.com/en-us/library/cc753659.aspx
If you have already did this, then run a scan with this tool,
Malicious Software Removal Tool
http://www.microsoft.com/en-in/download/malicious-software-removal-tool-details.aspx
or copy this folder to another location, test again.
Regards
Yolanda
TechNet Community Support

Loading .swf files

Never tried to load a flash movie before.
Should be a no brainer, but for some reason when I select the
movie from the insert flash video menu "test.swf" I get a path
error.
I moved all my files to C:\test\ but still get the same
ridiculous error. What gives with Dreamweaver 8?
baffeled

Try INSERT | Media > Flash, not Flash Video...
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"kevin raleigh" <[email protected]> wrote in
message
news:emggr6$pv7$[email protected]..
> Never tried to load a flash movie before.
> Should be a no brainer, but for some reason when I
select the movie from
> the
> insert flash video menu "test.swf" I get a path error.
> I moved all my files to C:\test\ but still get the same
ridiculous error.
> What gives with Dreamweaver 8?
>
> baffeled
>

Cannot edit using DW in live view.

Normally I write exclusively using an IDE in plain code, but have to deal with some HTML email designing and it is easier to develop these in a GUI editor. This is a plain HTML document, no javascript, no attached CSS even. It's all structurally correct to the declared doctype as well.
Whenever I make any edit in live view, even something as trivial as adding a space or a comma, I get an error: "Couldn't commit the changes made in live view. Refresh the live view and try editing again." No matter what I do, the same error occurs.
I am able to edit in the code section of split view or just plain code. This error only happens in live view.
I searched all over and can't find any help on this error. There's no further information in DW, just the above error message, which is more or less worthless from a debugging perspective. What's equally frustrating is Adobe decided that in the event of this error, they would just revert any changes that I've made to the document. I found this out after typing around 800 words which were irrecoverably erased, absolutely ridiculous error handling.
Anyway, this is a brand new installation of Dreamweaver CC. This is the only document I've ever loaded into it. I've also tried restarting and have made sure the document wasn't open in another program or locked or something similar.
System info.
Win 7 _64
Ton of RAM
i7 3.6 Ghz processor
All of my other creative suite apps work fine.

I haven't seen that error yet (Live View Editing is still pretty new in DW), I don't really like the Live View Editor though due to all of the functionality Adobe forgot to add.
Does it work in Design View?
Click the triangle next to the Live View button and choose Design View from the drop-down.

Row and Column Template ?

Trying to create this thing but no matter what I do I keep getting this ridiculous error:
Cannot create a linked row and column template based on
the selected rows. The grid needs to have at least one data row that is
not part of a row and column template.
What does this mean?

You can get your requirement done using the Row and Column Template
You can not save a row and column template with all rows in a report. You have to exclude at least one data row, otherwise you
will get the error that you mentioned.
If you want to save all the rows as a template and re-use it in other report, you can insert a data row at the end of all rows and hide that.
Now you can select the complete row set as a template by excluding the extra data row that you will insert & hide.
If you want to link the template in other reports with same row set you must be very careful with the formatting as you need to apply
inherit formatting before saving the template. I suggest to spend some time with the FR online documentation.
Regards
Ram

PS4 Party Chat NAT Type Issues

Anyone else completely irritated and annoyed by the inability to party chat because of NAT Type? This is a ridiculous error I thought they'd fix in the next patch, turns out not. I have been unable to chat with anyone because of my NAT Type. I can play online and chat online just fine but party chat doesn't work. My NAT is Type 2. I don't want to hear I need to set up a static IP and DMZ blah blah blah. That stuff is way to complicated and shouldn't be necessary if I or any PS user should want to chat in a party. I had absolutely no issues on my xbox 360 chatting in a party and I'm on the same modem and internet router as it was. I bought a PS4 to play and chat with friends and so far I haven't been able to chat with my friends at all. It's very irritating and annoying and I would like PSN to do something about it. A simple patch or anything to fix it, instead of being lazy and telling their 13 year old customers they have to set up static IP's and other ridiculous stuff. Please comment if you are having the same issues and hopefully Sony or PSN will see this and do something about it. I paid 400$ for a machine that requires me to hack into my own router in order to chat... Ridiculous.
Party Chat NAT Type Issues on PS4
This issue has been reported to the network team who are investigating the cause of the problem. As a temporary fix you can normally fix the NAT type error by on or more users leaving and re-joining the party.

I draw your attention to the last paragraph where it states a NAT Type 2 connection means its connected correctly & optimal for gaming
PS4 NAT Types:
In the network settings of the PS4, it uses 3 different NAT types to classify how the PS4 is connected to the Internet:
Type 1: The PS4 is sitting directly on the Internet with a public IP address. This setup doesn’t require NAT or inbound port forwarding and is used in scenarios where the PS4 is the only device wanting to use the Internet connection. This isn’t that common as most users share their Internet connection with other devices in their home.
Type 2: This is the most common and ideal type where the PS4 is sitting behind a RG that is performing NAT. The PS4 will have a private IP address which is translated to a private or public IP address by the RG.
Type 3: This usually implies you have a problem in the way the PS4 is accessing the Internet. This may be caused by a firewall or port restrictions. This isn’t ideal and will result in a sub-optimal gaming experience.
The difference between a Type 2 and Type 1 NAT is usually physical and can’t be changed by settings alone. If you have a Type 2 or higher NAT type then you are connected correctly and can have an optimal gaming experience.

Ridiculous errors in "extcode.h"

Similar Messages

Maybe you are looking for