Ridiculous!!! We need a MAC to use Application Loader to upload our apps to the AppStore??

Apparently, Apple has recently changed their appstore upload procedures and now require developers to use their Application Loader software to upload the binary files to appstore - which is only available on a MAC. is there any way a Windows developer and upload an app using a PC?

The change was over ten months ago. Prior to that the first part of the review process would involve checking for incorrect use of private API calls, and so on. Now the Application Loader does a good amount of verifying of the app, and can tell you what's wrong with it, which has to be better than you waiting a couple of weeks to only find that you had something wrong in the file.
Some people are using VM setups on WIndows to run OSX, just to run Application Uploader. See pages like this one:
http://lifehacker.com/5583650/run-mac-os-x-in-virtualbox-on-windows
Or, check amongst all of your colleagues and family, there is a chance that someone within not too bad commuting distance from you uses a Mac.
Another option would be to spend $700 to get one of these:
http://www.apple.com/macmini/
That may seem like a small fortune, but you could easily spend more than that you to get a decent Android tablet to test on.

Similar Messages

I try to upload my application using Application Loader

I try to upload my application .ipa using Application Loader then I receive this error :ERROR ITMS-9000: "Invalid Segment Alignment. This app does not have proper segment alignment and should be rebuilt with the latest version of Xcode. Please contact Developer Technical Support if you need further assistance."

This application is compiled with ad hoc option.
Another question: i´m using Flash2014 in Windows8.1 Is possible to upload the application, without a mac?

Cannot submit AIR build using Application Loader to itunes connect ERROR ITMS-90125

I'm using IntelliJ and windows 8
I have tried AIR 1.5, 1.6, 1.7.
using -useLegacyAOT=yes
Below is the error when I try to submit my app to Itunes Connect using Application Loader
ERROR ITMS-90125: "The binary is invalid. The encryption info in the LC_ENCRYPTION_INFO load command is either missing or invalid, or the binary is already encrypted. This binary does not seem to have been built with Apple's linker."
http://i.imgur.com/oNJQllN.png
Tried several things I read on forums but there's no reply for this exact error.
What do I need to do? Please help me.
Thank you.

@Marian Majewski-Sliwa
We looked into the info.plist file which you had shared but there appears to be no issue with the same.
If possible, could you please PM the packaged IPA file, all 3 ANEs which you have used in your project to help us investigate the issue further?
Thanks,
Abhinav

Error while uploading an ipa(zip) file using Application Loader

I have created an iOS application with Packager for iPhone
on a windows machine and tested it well on my iphone. But I am unable to upload the app with Application Loader in MAC Book.I have tried a lot to solve this problem.
This is the error message displayed on the Application Loader, after it finishes verification (zipp/unzip and code sign verificaion was succesful) and nearly finishes uploading:
Errors
/var/folders/KK/KK3BViY3FuOpA90EVey0VU+++TI/-Tmp-/412788415.itmsp
Please help

It was a network problem!!! the solution is to make sure that you have access to the following IPs and ports or simple not becoming behind any firewall
I was behind a firewall and Application Loader wants to have access to the following sockets:
                Server                              IP Address                                   TCP Port UDP Port
               itmsdav.apple.com            17.250.236.80                                  443          n/a
                                                      17.152.19.125
               itunesconnect.apple.com    (Dynamic)                                       443           n/a
               vgr101.apple.com               17.152.249.51                                 33001         33001-33100
               vgr102.apple.com               17.152.249.52                                 33001         33001-33100
               vgr103.apple.com               17.152.249.53                                 33001         33001-33100
               vgr104.apple.com               17.152.249.54                                 33001         33001-33100
               vgr105.apple.com               17.152.249.55                                 33001         33001-33100
               vgr106.apple.com               17.152.249.56                                 33001         33001-33100
               vgr107.apple.com               17.152.249.57                                 33001         33001-33100
               vgr108.apple.com               17.152.249.58                                 33001         33001-33100
               sgr201.apple.com               17.152.249.101                               44001         44001-44100
               sgr202.apple.com               17.152.249.102                               44001         44001-44100
               sgr203.apple.com               17.152.249.103                               44001         44001-44100
               sgr204.apple.com               17.152.249.104                               44001         44001-44100
               sgr205.apple.com               17.152.249.105                               44001         44001-44100
               sgr206.apple.com               17.152.249.106                               44001         44001-44100
               sgr207.apple.com               17.152.249.107                               44001         44001-44100
               sgr208.apple.com               17.152.249.108                               44001         44001-44100

Can you only use a credit card to purchase products in the Appstore

Can you only use a credit card to purchase products in the Appstore?

You can also use prepaid iTunes cards, if those are available in your country. PayPal is also an option if you're in the US.
Regards.

I am having difficulty in printing from my ipad to a Kodak Hero 9.1 WiFi printer. I am using Prin Pro Central as an App. The printer is not recognised on my Ipad. Any help or ideas would be appreciated.

I am having difficulty in printing from my ipad to a Kodak Hero 9.1 WiFi printer. I am using Prin Pro Central as an App. The printer is not recognised on my Ipad. Any help or ideas would be appreciated.

Versuche es mal ohne express vi s
Eine Whileschleife, dessen Zähler Du als Zeitbasis verwendest,
Sinusfunktionen als Signalquellen, g ..... ups english forum
Try it without express vis
a while loop with the index as timebase (multiply by your timestep to get t)
sinus functions with 2 Pi t as signals
In your vi in every interation of the while loop you generate an array of values where you always pich the same index ...
PS: here is my version
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

Can you buy apps from the appstore using phone credit?

can you buy apps from the appstore using phone credit?

No. Phone credit is from your cellular carrier. App store purchase payments are made to Apple.

I live in India.Earlier I was using my Debit Card to purchase apps from the App Store.But now I don't know what has happened,whenever I enter my debit card details,it is always declined. What should I do ? Please help me !

I live in India.Earlier I was using my Debit Card to purchase apps from the App Store.But now I don't know what has happened,whenever I enter my debit card details,it is always declined.
What should I do ?
Please help me !

I believe apple no longer accepts debit cards in some countries. Try a credit card instead. Go to settings/iTunes and App Store tap on the ID then then tap on view apple ID and log in then tap on account info and have a look at the billing options available to you

Is there a way in iPhone 5s to use the touch ID to purchase the apps in the AppStore only?

I want the iPhone not to be blocked but I'd like to use the touch id in the AppStore instead of the apple account password...

Ok, thanks but I think I wasn't completely clear, sorry... What I meant was that I want to use the touch Id to purchase the apps in the AppStore, but I don't want the iPhone to be locked at all, with no touch id and no 4 digits passcode, just because I don't want my friends to come to ask me to unlock my phone every time they want to play with it, take a picture or something... Sorry for the misunderstanding, but anyway, can this truly incredible device do such a simple thing or not?

I need a mac, but I dont know if I should wait for the new OS X 'leopard'

I dont have a mac yet, but I was looking at the new OS and the Time machine feature really caught my attention. Being a design student this could be the feature ive been waiting for. I just dont know I f I should wait for 'leopard' to be released or not. I really nee the computer now, but I dont want to pay extra to upgrade to 'leopard' later on. The web-site doesnt specify when It will be released, I was wondering If anyone knew If its a couple of weeks or months?
This would help me make an easier decision.
If anyone could give me some insight, that would be great.
thanks.
hp pavillion a250n Windows XP

iMacs that shipped with
Tiger still boot Jaguar
Bollocks! While they'll boot specifically compiled
versions of Darwin they will not boot Jaguar from a
boxed retail version or any version of Jaguar that
came with a Mac.
the iMac G5 will simply not boot any version of
Jaguar that came from Apple retail.
Bollocks! is right , you're absolutely wrong. My iMac which came with Tiger still boots retail Panther quire easily.
The tiger I was referring to, on my MBP is the Darwin 10.3 version recompllied to suport Intel. Yes i agrre that a newer Intel based system won't boot an older PPC based DVD, I should hope not. But thats because of PPC vs Intel NOT some supposed policy from Mac
I'm not sure where you get anything to support your statements since from the time That Intel based macs shipped with Panther there was no retail version of Tiger available for Intel, since then there has been no release of a new OS X so where are you even geting your so called "facts" from? Prior to that we were talking about PPC based Macs which most definitely ran prior version, in fact my old Powerbook which shipped with Tiger runs Jaguar and 10.2 and 10.1 as well.
While not officially noted, not that I'm aware of at
least, this has been Apple policy for quite some
time. While sure, you can get a Mac to use many
things it wasn't "meant" to although that doesn't
mean one should.
That's just plain wrong on so many levels..
So where are your use cases to support your made up policy?
{i] If you look back at each successive Mac OS X upgrade
from Jaguar and look at the systems that spanned the
release of the newer OS. In each case, even though
the hardware was exactly the same, those systems that
shipped with the newer OS failed to boot and install
from the discs of the exact same system that had the
older version OS. Yes there were a few that did
although once Apple manufacturing caught up with
itself, which was normally a week or two, they
didn't.{/i]
Just wrong again, Yes maybe if the hardware has changed to support some new device in the new Mac. The only way that would be true as if you factored in the change from PPC to x86 architecture. I have several machines which run retail versions of OSx back to 10.2, some even 10.1 on boxes that shpiped with Jaguar or even Tiger. And there are no firmware blocks that limit that. That is what you claim
Give us some examples of this "supposedly unstated policy" you seem to think is in effect.
INo… because you're not correct through simply not
referring to Apple retail versions of Mac OS X and
moreso, the implications of such advice infers that
one has full support for older OSs where they do
not
Bottom line… if you want a system that runs Mac OS X
Tiger then buy one that comes with it..
First of all I never said that one has full suport for all old versions of OSX. I said there is NO policy in Firmware that prohibits newer OSX based machines from running older versions of OSX. But I think you're just basically overlooking the fact that in the cases you cite there were probably actual hardware progressions that made older retail version not see newer hardware. It wasn't some mysterious Firmware blocking as you claim. It was pure hardware progression.
By the way, what if someone follows your advice,
waits for Leopard and finds they need Tiger and can't
install it? What are you going to do beyond shrug you
shoulders and say "not your problem"?
Uhhh, if you read my post, I never said to do what you seem to think I said. I merely asked YOU to cite an example of this "policy" and firmware blocking, which you haven't done yet BTW, cause I think you're wrong and I don't think its a policy to block, as you suggest, in firmware, a previous OS version for every new hadware version shipped with a new software version.
When Leopard ships on a C2D MBP you will not have to worry about that MBP not running retail Tiger. It certainly won't have some mysterious firmware block on booting Tiger after some mysterious two week period as you claim. Now if there is a NEWER revision with newer hardware that ships with Leopard there may be an issue with a currently available version of Tiger because it doesn't support the new hardware. It won't be , as you claim, some unstated policy manifested in firmware that prevents Tiger from installing.
So lets just end this here and now cause its a waste of people's time and my posts weren't claiming that if you need tiger don't buy a machine with Leopard on it, as you seem to think I was saying. What I said and stand by is this. There is no unwritten or written policy that has Apple blocking previous versions of its OS X in new hardware shipped with new software via firmware. Unless tha actual hardware contains devices that the prior version of OSX was unaware of. That's all I was pointing out. Somehow you stretched this into something completely different.

I used Roboform on Windows and have tried the Mac version. Is there a comparable or at least an effective app in the AppStore?

The Mac version didn't seem to work as well as the Windows version but that may have been the result of transferring data from W to Mac. The sync function is useful. There are a lot of apps in the App Store are any of them as good as Roboform?
The passwords are in a Roboform data file in documents transferred from Windows but don't appear when I select the Roboform icon. I don't know how to transfer them within the Mac platform.

There is a version for Mac, from their web site...
•Mac Password Manager - RoboForm:
http://www.roboform.com/platforms/mac
home: http://roboform.com./
There also is an iOS version, see downloads.
Hopefully this is what you are asking about.
Good luck & happy computing!

Force detection using Application Loader - PROBLEM

I have never had my 8220 flip connected to any computer and it has the JVM 545 error. I have printed out the directions from this web site on how to do the force however after double clicking the application loader I have 2 options either update or add/remove, and either option gives me the same problem, it cannot detect the blackberry attached (because the battery is out), my only option then is cancel, not okay, so what now?
Thanks

Hello Kadscoz,
I would suggest you try to use the Web-Based software loader as outlined in this post. If this doesn't work, try it on another computer if you have access to one. It sounds like the computer isn't detecting the BlackBerry.
cheers,
-tg
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Unknown error message when using Application Loader

Does anyone have any insight as to what might be causing these?
Thank you.

Do you have the most up to date application loader?
Bob

Error when using Application Loader

When I try to upload my app to with the application loader I get this message:
In iTunes Connect, Newsstand is enabled for your app version. The Info.plist must include UINewsstandApp=true and a CFBundleIcons.UINewsstandIcon dictionary must be specified.
I'm submitting Multi-folio.
Please help guys!

What settings would that be specifically?

Applications loading and running in background all the time

Lately my Macbook Pro seems to be running apps in the background and installing. It makes the working noises the Macbook makes when the processors are working. Quite often when I shut it down it asks me if I want to abort installation. I keep having to manually remove 'com.wondershare.mobilegodaemon' from the Console, but it comes right back when I reboot. Mobile go is the phone android app to connect your phone to the laptop. I also recently purchased Adobe software on the cloud.
Is there anyway to prevent apps from updating or working in the background while I work? It is annoying when I am working on a project, the laptop begins to howl and will not stop.
Can I remove all the files from the Launch Daemon and Launch Folders in the Library folder?
Do I have some kind of virus or infection?
Please help! Thank you.

FJLLORE wrote:
I deleted android wondershare a few weeks ago.
You didn't do it right, it seems. For the future, follow proper uninstall procedures:
How to uninstall software
As for where the remaining files that didn't get removed are located, I have no idea. The fact that you are able to temporarily disable it with launchctl says at least one of them will be in one of the LaunchAgents or LaunchDaemons folders on your computer, either in the root-level Library folder or the invisible one in your user folder (hold down option and choose Library from the Go menu in the Finder to open that one). However, for all I know there may be other files related to Wondershare located elsewhere as well.
Rather than randomly hunting around for these files, I'd recommend looking for the official Wondershare uninstaller and trying that. You may need to reinstall it in order to remove it at this point, since you only have a partial install left.
I have run Adwaremedic and I have run Mackeeper to no avail.
AdwareMedic will not remove Wondershare, because that's not adware. AdwareMedic only removes adware.
MacKeeper is garbage that should never be used. You need to remove that immediately! For more on why, see:
Ongoing MacKeeper fraud
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com.)

Ridiculous!!! We need a MAC to use Application Loader to upload our apps to the AppStore??

Similar Messages

Maybe you are looking for