Ridiculously large gaps in mail headers.

Using 10.4.11 on my powerbook g4. When I open mac mail, and open a message, the header takes multiple pages to display. There are very large gaps between each recipient in the header, making a mail that would normally be shown to have been sent to six people, and only occupying 1 page, now take three pages to show the 6 recipients, and then whatever the text of the message is... often only one line.
What's going on and how do I stop it?
Thanks
Bruce

Hi Bruce, I suspect you have a bad Font, open Font Book & Verify the Fonts & check for duplicates.
Installed any fonts lately?
In Mail Preferences>Fonts & Colors, try changing the fonts you use.

Similar Messages

Large gaps in Message Headers

All of a sudden today I notice that all my emails have some kind of expanded header behavior? All the message is in tact, but the header info in ecah email takes up several vertical inches in the message window with mostly white space. In other words, I get: The sender's name and their email address, then about 4" of white space instead of a return. From, Subject and Date all on single spaced lines, then about another 1.5" of white space, The the word "To:", the a break line. Below the breakline all the messages look normal?
Any Ideas how to fix this?

I am having the same issue, after installing Extensis Suitcase Fusion. What font is Mail looking for? If it is Helvetica, what version? Where does the font need to live; system/library, ect.?
The only Helvetica fonts I have are:
Helvetica Neue, Helvetica Inserat, and a sytem font- .Helvetica LT MM
Did something get lost in the shuffle? I have run Extensis Font Doctor and it fixed a lot of issues but Mail is still looking weird.
Is their a font cache for Mail? I have already reset system font caches. -BA

Modern resume template - Large gap on 2nd and subsequent pages

I am using Pages 5.5.2 on Yosemite 10.10.1. When the body content extends beyond the first page, all subsequent pages have a large gap at the top. If I change the top margin, the content overlaps with the name and address 'layers'. How do I reduce the space. There is an existing question, but it refers to previous versions.
Thanks

Using multiple returns is a very crude and amateurish way of laying out text.
Firstly determine what should and should not be in the Headers and Footers. Company Name and Address should not be in the Header if they are only required once on the front page. They should be in a floating TextBox or part of the Initial Text.
Headers and Footers should be reserved for what they are meant for, repeating elements like Chapter titles and page numbers.
To maintain the necessary spacing to the text under use Space after paragraph.
In Pages '09 you can do this more neatly with First Page is different and using a Layout Break to start the page lower.
Peter

Mail: How To Get Mail Headers To Show "Read"

How can I get the mail headers to "gray" out or be colored when they've been read? Right now, ALL messages in the list are bold black. Once I read an email, it still shows bold and black. I need some sort of identification to show what is NEW and what HAS BEEN READ.
I've been using Outlook, which grays out read messages.
Any help would be appreciated. Thanks in advance.
Dave

Check the box at:
Mail > Preferences > Viewing | Display Unread Messages with bold font

Mac mail headers appearing as gibberish

My mac mail headers are suddenly appearing as gibberish. This happened to me once before and I think it had something to do with suitcase and helvetica fractions but I cannot remember how to fix it. I don't seem to have helvetica fractions turned on in suitcase.
Thanks so much

See if this site helps:
http://www.creativetechs.com/iq/garbledfonts_troubleshootingguide.html

HT3142 Display size is too large on yahoo mail

My display size is too large on yahoo mail page only (page I need and use most). How do I correct it, please?
Changing the display selections from system preferences is not working.

There may be a control within the application you are running Yahoo.
Which browser are you using online to access Yahoo?
In the View menu bar of the open application, there may be a choice
to change the size of the display content in the window itself, check.
Some of these use a keyboard command, should the setting go to
Full Screen, you'd need to know the default or escape combination
of keys to restore the application's window to a standard size. This
kind of inside-application setting is not reflected System Wide.
Since I don't know the browser, (as I have five, each is different)
I can't recommend a keyboard combination to re-size the open
application's view or window setting. They can be non-standard.
But that likely is where you'd have to change it back to normal.
PS: Snow Leopard is Mac OS X 10.6.8.
(Tiger is OS X 10.4.x)
Good luck!

Incremental BACKUP to resolve large gap in Data Guard

Hi, all,
We run into a situation that standby database was shutdown for a long time and had a large gap between the primary and standby. I am interested in the idea to use incremental backup from primary db to resolve the gap. Does anyone know the procedure to do the work? Our environment is Oracle 10g RAC R2 on both primary and standby, ASM. Any suggestions are highly appreciated. Thanks in advance

Check Using RMAN Incremental Backups to Roll Forward a Physical Standby Database.

MSOutlook HTML newsletter issues - large gaps between large images and small gaps...

Please can you help me!
Searched the web & found plently of advice but still getting formatting display issue when viewing HTML newsletter in MS Outlook.
Fully aware on the basics regarding the multiple issues when creating HTML newsletters but this is driving me crazy.
Apparently there is a image height limit within Outlook (can't find out what this is) so I have sliced my larger images into 5/6 parts which solves the display issue in Outlook.
But the gaps between the slices are now being displayed as small blank spaces within Hotmail.
I did use <br> between each slice as without caused the fixed 600px wide containing table to expand due to the slices stacking hoz.
Also still getting small gaps (like <br> spaces) between all images in Outlook when displaying perfectly (no gaps) in a browser.
This is my newsletter displaying correctly via a browser:
http://eu.shorts.tv/site-admin/modules/mod_mail/SHORTSTV_DECEMBER_2012.htm
Using Dreamweaver 4 (do have the latest version via Adobe Creative Cloud Membership but not on this system).
Hope you can help
Many thanks

Many thanks David
I also found this article which is currently sitting on my desk.
Pdf would make perfect sense or even a url link to view via a browser but these guys need it contained within the email.
Thanks again for your kind advice.
Regards
ShortsTV
Date: Fri, 30 Nov 2012 18:05:08 -0700
From: [email protected]
To: [email protected]
Subject: MSOutlook HTML newsletter issues - large gaps between large images and small gaps...
    Re: MSOutlook HTML newsletter issues - large gaps between large images and small gaps...
    created by David__B in Adobe Creative Cloud - View the full discussion
Hey Shortstv, Not something I know much about, searched and found thishttp://robcubbon.com/create-html-email-newsletters-outlook/ Maybe create it as a PDF attachment instead? -Dave
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4888255#4888255
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4888255#4888255
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4888255#4888255. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Creative Cloud by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Best practices for speeding up Mail with large numbers of mail?

I have over 100,000 mails going back about 7 years in multiple accounts in dozens of folders using up nearly 3GB of disk space.
Things are starting to drag - particularly when it comes to opening folders.
I suspect the main problem is having large numbers of mails in those folders that are the slowest - like maybe a few thousand at a time or more.
What are some best practices for dealing with very large amounts of mails?
Are smart mailboxes faster to deal with? I would think they would be slower because the original emails would tend to not get filed as often, leading to even larger mailboxes. And the search time takes a lot, doesn't it?
Are there utilities for auto-filing messages in large mailboxes to, say, divide them up by month to make the mailboxes smaller? Would that speed things up?
Or what about moving older messages out of mail to a database where they are still searchable but not weighing down on Mail itself?
Suggestions are welcome!
Thanks!
doug

Smart mailboxes obviously cannot be any faster than real mailboxes, and storing large amounts of mail in a single mailbox is calling for trouble. Rather than organizing mail in mailboxes by month, however, what I like to do is organize it by year, with subfolders by topic for each year. You may also want to take a look at the following article:
http://www.hawkwings.net/2006/08/21/can-mailapp-cope-with-heavy-loads/
That said, it could be that you need to re-create the index, which you can do as follows:
1. Quit Mail if it’s running.
2. In the Finder, go to ~/Library/Mail/. Make a backup copy of this folder, just in case something goes wrong, e.g. by dragging it to the Desktop while holding the Option (Alt) key down. This is where all your mail is stored.
3. Locate Envelope Index and move it to the Trash. If you see an Envelope Index-journal file there, delete it as well.
4. Move any “IMAP-”, “Mac-”, or “Exchange-” account folders to the Trash. Note that you can do this with IMAP-type accounts because they store mail on the server and Mail can easily re-create them. DON’T trash any “POP-” account folders, as that would cause all mail stored there to be lost.
5. Open Mail. It will tell you that your mail needs to be “imported”. Click Continue and Mail will proceed to re-create Envelope Index -- Mail says it’s “importing”, but it just re-creates the index if the mailboxes are already in Mail 2.x format.
6. As a side effect of having removed the IMAP account folders, those accounts may be in an “offline” state now. Do Mailbox > Go Online to bring them back online.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder, i.e. ~/Library is the Library folder within the user’s home folder.

X-Forwarded-For Header in mail headers

Can anyone help how I can instruct Exchange 2013 to include X-Forwarded-For header in mail headers. Usually as per standard, X-Originating-IP is added in mail headers. However, when Exchange 2013 OWA URL is load balanced using F5 (or any other hardware load
balancer), X-Originating-IP would point to load balancer self IP. There is a feature in load balancers to add X-Forwarded-For header when HTTP packets are forwarded to CAS servers by F5. Exchange 2013 is able to detect original client IP in IIS logs through X-Forwarded-For
header, but this headers is not captured by Exchange.
Regards,
Ramesh

Hi,
To log the real client IP in the IIS hit logs
http://blogs.iis.net/deanc/archive/2013/07/08/iis7-8-logging-the-real-client-ip-in-the-iis-hit-logs.aspx
Best Regards.

In iMovie 11 small gaps in clips seem to transition nicely, but how do I reduce or eliminate the larger gaps? I can't find a way to move the clips together.

In iMovie 11 small gaps in clips seem to transition nicely, but how do I reduce or eliminate the larger gaps? I can't find a way to move the clips together.

I'm intrigued by this!
Can you explain further what the gaps look like when you export the movie. Are there black spaces, for example? You mentioned earlier that "it jumps quickly between clips that I edited which gives it a jerky appearance at those transitions". So you are possibly just seeing a change in sudden movement when moving from one clip to another.
I've noticed when shooting with my AVCHD camcorder that if I quickly move the camera straight after pressing the record button to stop recording, a jerky movement appears when played back. This is because the camera is still recording for a fraction of a second after pressing the button, that is, there is a slight delay before actual recording stops on the hard drive (unlike a tape based camera).
I simply edit out these annoying movements. When hovering the pointer over the beginning or end of a clip, a small icon appears, shaped like a left/right arrow. Click on the icon and a small section of the clip end (or beginning if editing the start point) will be partly encased in an orange border. You can then drag the border's handle inwards in increments of one frame, up to one second duration. Repeat this if you wish to trim more than one second. I find this better for short trimming than just dragging the clip ends inwards and using Trim to Selection from the pop-up menu, as it is quicker and has more precision. To enable this feature, in iMovie > Preferences - Browser tab, check the box labelled "Show Fine Tuning controls".
Of course, this may not be what you are seeing. But I can't really envisage what you mean by "how do I reduce or eliminate the larger gaps", as there should be no gaps, as explained by AppleMan1958. Could you please provide some more information, or include a screenshot of what you are describing.
To take a screenshot, press the key combination Command+Shift+4 - a crosshair will appear on screen. Drag this diagonally across the section you want to capture. A .png image file will appear on the Desktop. When posting here you will see a camera icon in the reply window's menu bar. Click on the camera icon then follow the steps provided (it lets you navigate to the image). Sorry if you already know this!
John

Sequence creating large gaps than expected

Oracle 11g, windows server2008
Hi
How can I find out which table columns used a sequence in my database (in past 2 or 3 days for example)
This is needed because the sequence increments by 1 BUT while doing a query on table column which use this sequence, it was found that large gaps are being produced in between the numbers in the table column using this sequence.
The cache is 20 .
We dont need consecutive numbers, just curious why the sequence is producing bigger gaps than expected.
What are the reasons for the sequence cache being cleared, other than shutdown,rollback&export/import of the database?
The gap is not uniform , sometimes there is a gap of 20.. sometimes 17 or 100, i.e uneven numbers with no pattern..and while searching the codes,packages etc, to see where the sequence is being used, its only this one table column but there culd be some other column using this, so would like to know that and that could be the reason why the sequence is having large gaps like this.
(E.g. for producing a 100 records, it used 1000 numbers etc..)
Thanks very much

Krithi wrote:
Hi
Can you please expand it a bit more, as its not familiar for me
1)After enabling auditing using the syntax(logged in as sysdba i suppose),where will I see the result and how to check the result?
DBA_AUDIT_TRAIL
2)How to disable auditing once I have done with this?
You have the syntax for turning on the audit, the same reference manual that documents that also documents how to turn it off
Contents
Here's a bit of fatherly advice to help you in your career. When you are given a clue like a particular sql statement, or mention of a feature like 'audit', spend a bit of time in the documentation to see what you can learn of it - before coming back and asking more about it.
=================================================
Learning how to look things up in the documentation is time well spent investing in your career. To that end, you should drop everything else you are doing and do the following:
Go to docs.oracle.com.
Locate the link for your Oracle product and version, and click on it.
You are now at the entire documentation set for your selected Oracle product and version.
BOOKMARK THAT LOCATION
Spend a few minutes just getting familiar with what is available here. Take special note of the "books" and "search" tabs. Under the "books" tab (for 10.x) or the "Master Book List" link (for 11.x) you will find the complete documentation library.
Spend a few minutes just getting familiar with what kind of documentation is available there by simply browsing the titles under the "Books" tab.
Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what kind of information is available there.
Do the same with the SQL Reference Manual.
Do the same with the Utilities manual.
You don't have to read the above in depth. They are reference manuals. Just get familiar with what is there to be referenced. Ninety percent of the questions asked on this forum can be answered in less than 5 minutes by simply searching one of the above manuals.
Then set yourself a plan to dig deeper.
- *Read a chapter a day from the Concepts Manual*.
- Take a look in your alert log. One of the first things listed at startup is the initialization parms with non-default values. Read up on each one of them (listed in your alert log) in the Reference Manual.
- Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files. Go to the Network Administrators manual and read up on everything you see in those files.
- *When you have finished reading the Concepts Manual, do it again*.
Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.
=================================

Cannot copy mail headers any more in Mail.app

I used to be able to click in the headers to an email, do command-A, then command-C, and it would copy all the headers so I could paste it into another document. For some reason, this has been removed from Mail. If I select all the mail headers and copy them, I only get the email addresses, without any header info. This is killing me. Is there any workaround to this anyone knows?
Thanks

As of 30 Jan 2013, Google stopped supporting Exchange for free accounts. You'll need to set up Gmail using the regular Gmail presets. See this article for some options:
http://www.mactrast.com/2012/12/how-to-setup-google-email-contacts-calendar/

E71 How to delete e-mail headers from phone (IMAP ...

I use IMAP e-mail, so all none deleted e-mails stay on the server and are accessable from anywhere.
I have realised that I can't delete e-mail headers from the phone (I only want the last 7 days or so) . The delete options are: delete from Server and Phone, delete from phone - header remains.
This means that I am building a huge list of headers and will be useing memory.
Anyone found a way around this?
Many thanks. Peter

Nokia email client is not supported for my device (7610).
Also, it seems, there is no way to delete the headers selectively. Normally, when you want to handle the emails through your mobile device, you want to keep only important ones and delete the rest. So, possibly, Nokia can consider this for the future updates of the software, where user can delete the headers selectively to keep the inbox uncluttered and only as per the requirement.

Large gaps appearing between content when exporting to HTML

Good afternoon,
I'm relatively new to Muse and I'm evaluation whether to purchase a subscription, but this problem has got me very frustrated. I have very large gaps appearing between content in my designs, causing the site to look terrible and not anywhere near how it looks in Muse.
I have seen this error reported on the forums earlier, and I have checked and can't see any "hidden text boxes" or "0 wide content" causing this bug. Please look at my screenshots for an explanation of the problem.
This is what I see in Muse, it looks relatively clean and I'm liking how it appears.
But when I export to HTML, I get this atrocity.
The Muse file is available to download from here:
http://www.fixem.com.au/DCR%20Concrete%20Site.rar
Any help would be greatly appreciated. Thank you for your time.

Hi Larry
The text at bottom shows when viewed in browser as I checked, but let me know which browser you are using ? Also if you are using the site to publish to any external server.
Regarding resources , there are many tutorials and forum threads for best practices used for text styling ,
These videos should help you :
http://tv.adobe.com/watch/learn-adobe-muse-cc/applying-effects-to-text/
http://tv.adobe.com/watch/learn-adobe-muse-cc/work-with-text-adding-text/
http://tv.adobe.com/watch/learn-adobe-muse-cc/working-with-text-styles-create-a-paragraph- style/
Thanks,
Sanjit

Ridiculously large gaps in mail headers.

Similar Messages

Maybe you are looking for