Rig failing to start, all 6 CPU LEDs lit, no BIOS failure, no signal on monitor
Hi.
I purchased new parts for my computer and started assembling them 2 days ago. Everything went fine and I managed to install Windows 7 to my Corsair SSD Force 3.
Everything ran fine yesterday until I started tweaking with the OC settings. I got a stable config from a friend who has the same rig as me, saved settings in BIOS and started computer, ran a 10 minute Prime95 full load test and none of my cores ran warmer than 71 degrees. After this I restarted my computer, and from that point I can't get ANY video signal on any of monitors from my graphics card or the internal gpu. The computer powers on, all 6 LEDs for the CPU are lit but none of the BIOS error LEDs are lit.
Things I've tested so far:
*Checked my XFX 5970 Black Edition in another computer - Worked
*Tested all ports on the dedicated and integrated gpu.
*Tested both PCI-e ports
*Reset BIOS with the jumper
*Removed CMOS battery and power cable to MB
*Unplugged SSD disc
Full system spec:
MK MSI Z68A-GD55 (G3) Socket 1155, Z68, ATX B3
CPU Core i7 2600K
Corsair 8GB (KIT) DDR3 1600MHz/CL9/VENGE INET
SSD 120GB Corsair SATA 2.5", Force 3 Series INET
Corsair Cooling Hydro H80 CPU-kylare multiplatform
PSU Fractal Design 800W Newton R2/800W/Modular
Kab Fractal Design Define R3/TITANIUM/NO-PSU USB 3.
Noctua P12-1300 120mm Silent Case Fan
XFX 5970 Black Edition
Any tips on what might cause my problem and what I can do to fix it?
Quote from: Zogun on 30-October-11, 23:34:11
Everything ran fine yesterday until I started tweaking with the OC settings.
I got a stable config from a friend who has the same rig as me.
This was 71 degrees celcius from 10 minutes of stress testing @4,8 GHz.
Stable for how long?
Did you test your CPU on another rig?
Maybe it's time to pay the price for that "stress testing".
Similar Messages
-
Hi There,
I'm getting the errors below and but I have not got any BSOD.
The errors I'm getting in eventviewer are Pku2ulog failed to start 0xC--35, Negolog failed to start, IDListenLog failed to start, P2PLog failed to start and HomegroupLog failed to start, all with the same failure code 0xC-- 35.
This is what the logs files says about each error.
Pku2ulog:
Unknown( 10): GUID=c36a26fb-03a9-d591-3984-dc17e4a48527 (No Format Information found).
p2plog:
Unknown( 89): GUID=fc9d5ca5-e6c8-627c-be74-e6e0a98bbf57 (No Format Information found).
negolog:
Unknown( 37): GUID=2553184f-6f2a-3198-ddb7-93ab1ad2d125 (No Format Information found).
idlistenlog:
Unknown( 10): GUID=418a567f-b393-1423-26aa-123149ef8882 (No Format Information found).
homegrouplog:
Unknown( 12): GUID=96f7a94a-4343-6ede-ff2b-dd1dafeed500 (No Format Information found).
However, the 'Unknown(xx)' number changes times to times.
Could you help me please?
Thank you very much for your attention.
Best Regards.Hi,
If you have Home group set up, please go to Control Panel – Network and Sharing Center. Choose homegroup and sharing options and click “Leave the homegroup”.
Juke Chou
TechNet Community Support -
Failed to start Share could not initiate desktop share
we have calabrio QM recording as well as jabber running. we record their desktop with calabrio. however when we have a user that tries to initiate a desktop share with jabber it gives us the error "Failed to start Share could not initiate desktop share" when i stop the desktop monitoring and recording service from calabrio it works. i thought that there might be some port overlap but they have alot of ports that are open to chose form and i find that hard to believe.
i have been told that if calabrio and jabber use the same remote assistance windows api they will never work in harmony. Does anyone know if jabber uses the remote assistance api to for screen sharing?This problem is not isolated to the Broadcom adapter. However, based on several inquiries, we list the following instructions based on other customers successfully working around this issue:
Place the Broadcom driver files in the original image folder (the image folder created when risetup.exe was executed for the first time).
Example: i:\RemoteInstall\Setup\English\Images\(Original Image)
Place the Broadcom driver files in the i386 subfolder under the original image folder
Example: i:\RemoteInstall\Setup\English\Images\(Original Image)\i386
Place the Broadcom driver files for the network adapter in the RIPREP Image folder.
Example: i:\RemoteInstall\Setup\English\Images\(RIPREP Image)
Place the Broadcom adapter drivers in the i386 subfolder where the RIPREP Image is located.
Example: i:\RemoteInstall\Setup\English\Images\(RIPREP Image)\i386
The Microsoft Knowledge base articles listed below were used as a reference for the following instructions:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;254078
http://support.microsoft.com/default.aspx?scid=kb;EN-US;246184
Found this on -
https://www.broadcom.com/support/ethernet_nic/faq_drivers.php
I don't know if this will help, looks really old, about as old as the network card :) -
I was trying to do the latest update on my desktop for my Itunes. I got MSVCR80.dll is missing. I saw a post about deleting all the apple itunes programs, restarting and reinstalling. I tried that. As it was installing a message came up about "Service'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start systems services. I did a retry, got the same message, then hit ignore. It went on. Then a message popped up saying "Itunes not installed correctly" Error 7 (Windows error 126)
Now my Itunes program will not open at all. What gives? This is very frustrating and I am not very computer literate to begin with.Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
I tried to update my computer itunes program and it failed several times. First of all I had a message that sdi choose "tools and then download manually." I did and then everything got even worse. I got a message that siad, "This application has failed to start...MSVCR80.dil...Reistalllation may fix th problem."
I finally just backed out of everything and then got a message that said, "Itunes was not installed correctly. Please reinstall...Error 7 (Windows error126).
I need a tech person to call me and help. I don't have a clue what to do. I'm a musicain and all of my using is on itunes on my computer...I want to cry...I can't open it...is ti gone!!!!
LoriGot the same problem. It seems it is happening all over the place with the i-tunes update.
-
Ihave tried everything that Apple has asked and it keeps giving me the same message. First I get this message
"An error has occdurred during installation assembly "Microsoft vc80.crt.type.win32"...verision "8.0.50727.4053" public key token=1fc8b3b9a1e18e3b" processor architecture="amd64" please refer to help and support for more information. HR result 0x8057054F
then i click ok and it backsup and reinstalls it and i get this message..."Service apple mobile device device failed to start. verified that you have sufficient privileges to start system services."
I have deleted everything itunes/apple on the laptop, i am the administrator and created another account on my computer that was administrator and i have ran the fix it tool, and have reinstalled apple itunes and still get the messages. i have deleted all virus protectors, took my firewall down. and still same errors. i just got an iphone 4 with no music and I cannot afford to pay for my music when i can just put it on there.
PLEASE HELP ME!!!! I am at the end of my witts with this thing.Go tot the Apple support troubleshooting area I had the same problem. You have to remove all the apple stuff in a particular order then reinstall/dowmload i tunes again it worked for me, a pain yes! But I now have Outlook loading issues so if anyone knows what that problem is and how to solve it please let me know
-
I tried to download the latest version of iTunes but failed half way through. It suggested that i reinstall we I tried. However, i now get this message which states "Application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix the problem"
I have tried this but with no success. I have therefore found that I cannot access my iTunes library at all now.
What should I do.Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99792) -
Pretty much as above, when I plug my iphone in it just comes up with the message saying the sync session failed to start and thats all I can get out of it :/
Any ideas on what I need to do to get my iphone to talk to my itunes again please?Hi hblower,
As a first step, I would suggest quitting your open apps:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Then sign out of iTunes:
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311?viewlocale=en_US
Restart and/or reset the device:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Are you running the latest version of iTunes? If not, update the software and try syncing again …
Cheers,
Judy -
I'm trying to sync my iPhone4s, but everytime iTunes tries to sync, I get a message "This iPhone cannot sync because the sync session failed to start." I've tried restoring my phone, and all my software is up to date. It won't sync any of my songs/apps back to my phone. Somebody please help!
Try to connect in recovery mode, explained in this article:
iOS: Unable to update or restore
Before that, back up your device, explained here:
iOS: Back up and restore your iOS device with iCloud or iTunes
How to back up your data and set up as a new device
You can check your warranty status here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do -
I am getting this error message:
Service apple mobile device failed to start. Verify that you have sufficient privleges to start system services.Hey I finally got an older vesion of itunes to work!!! 10.7 x64 for windows 7
After uninstalling all apple products even quicktime
I had to delete everything from (program files, and program files x64, program data,)
And all downloads from apple, and I went in to search deleted other stuff from apple, and itunes
But definently not my itunes library and Playlist
Down loaded 10.7 x64 for windows 7, but checked (do not start when done)
Then I emptied my recycling bin and restarted my PC
I ran geek tech tool box same as reg cure pro, also PC Tools registry cleaner, and CC Cleaner
Then I emptied my recycling bin and restarted my PC
And wallah... It finally works, and I Love the older version anyways.
Easier to download and transfer music!!!!! -
I just attempted to update my apple iTunes to 11.1.4 which resulted in the msvcr80.dll error message. I followed all of the instructions to move the .dll's to the desktop, I removed iTunes via the control panel, and now I can't get past the Service 'Apple Mobile Divice failed to start. Verify that you have sufficent privilidges to start systems services. I now have no iTunes on my laptop, can't reinstall iTunes, and I am pulling my hair out because I can not figure out how to send an e-mail to Apple because I bought my iPad just over a year ago. PLEASE HELP!!!
V/r "TRACER"
CDR Harold W. "TRACER" Valentine, SC, USNSolving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
I can not get apple mobile device to activate. When reinstalling itunes it still comes up with, Service 'Apple Mobile Device' failed to start. Verify that you have sufficient services. I have followed all fixes and can not resolve this problem?
Thanks to the suggestion of Doehunter the problem has been resolved
-
11.1.4 gives me an error message that says Service "Apple Mobile Device" failed to start. Verify that you have sufficient privileges to start system services. Now, iTunes won't work at all.
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Application Server 10g R2: opmn start all failed
Hi,
I have sat up a test domain according to the guidelines from Claus Jandausch "Oracle for Windows and .NET". Everything worked fine until we started the manual configuration of the Single Sign On support on the application server. Even after we have undone all manual changes in the configuration files, we are not able anymore to make opmn startall. We always get a messages like this:
Error
--> Process (pid=0)
oid dependency failed
OID
failed to start a managed process because a dependency check failed
Log:
none
It is not possible to start the OID anymore.
Has anybody any idea, how to solve this?
Thanks a lot,
ChristopherYes, I have. I have recreated the original state of
- opmn.xml
- jazn-data.xml
- web.xml
- orion-application.xml
- policy-properties
by using copies of the original files.
I also have undone my changes to the sqlnet.ora.
After that I started >dcmctl updateconfig -ct ohs and got this error message:
ADMN-202046
The OracleAS Repository API threw an exception when obtaining the connect string
to the Metadata Repository
Resolution:
Check the exception thrown by the Repository API for resolution information.
Some common causes of this problem are as follows:
OID is not running or unavailable
the ias.properties file is misconfigured with incorrect OID connection i
nformation
OID permissions are incorrectly defined
Base Exception:
oracle.ias.repository.schema.SchemaException
Unable to establish connection to the Oracle Internet Directory Server ldap://tn
-s-as.osis-tnet.com:3060/. Base Exception : javax.naming.CommunicationException:
tn-s-as.osis-tnet.com:3060 [Root exception is java.net.ConnectException: Connec
tion refused: connect]
oracle.ias.repository.schema.SchemaException: Unable to establish connection to
the Oracle Internet Directory Server ldap://tn-s-as.osis-tnet.com:3060/. Base Ex
ception : javax.naming.CommunicationException: tn-s-as.osis-tnet.com:3060 [Root
exception is java.net.ConnectException: Connection refused: connect]
at oracle.ias.repository.directory.DirectoryReader.connect(DirectoryRead
er.java:124)
at oracle.ias.repository.IASSchema.getDBConnect(IASSchema.java:523)
at oracle.ias.repository.IASSchema.getDBConnect(IASSchema.java:725)
at oracle.ias.repository.SchemaManager.getDBConnect(SchemaManager.java:4
05)
at oracle.ias.sysmgmt.persistence.SeedDbAccess.getDBConnect(Unknown Sour
ce)
at oracle.ias.sysmgmt.persistence.PersistenceManager.getSeedInfo(Unknown
Source)
at oracle.ias.sysmgmt.persistence.PersistenceManager.<init>(Unknown Sour
ce)
at oracle.ias.sysmgmt.persistence.PersistenceManager.<init>(Unknown Sour
ce)
at oracle.ias.sysmgmt.task.TaskMaster.initRepository(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.<init>(Unknown Source)
at oracle.ias.sysmgmt.task.InstanceManager.sysInit(Unknown Source)
at oracle.ias.sysmgmt.task.InstanceManager.init(Unknown Source) -
My ipod touch shows up under devices, and it always used to sync right but all of a sudden one day it started saying "You're ipod could not be synced because the sync session failed to start" and now it's not syncing anymore. How do I fix this?
See if this previous discussion helps.
Sync Session Failed to Start iTouch iOS5: Apple Support Communities
Maybe you are looking for
-
Problem updating ipod with favourite cd
hello I 'm new in this aplle family but I'm,having already problems. i've got an ipod color for x-mas and after a long time i'have found time to load it with my favourite musics. the problem is that after 4cds i've got a message that told me that it'
-
Hi, I have a query in sql Table employees columns : empid,hiredate,job_id,salary I want to count(empid) and group data weekly with job_id , order by month. Sample of Data like : mon week job_id count(empid) jan week1 sa_rep 15 jan week2 sa_rep 20 jan
-
Sopcast application quit unexpectedly error
Hello, since today i've been experiencing problems with running the Sopcast (streaming) app. Until today i had no issues running it except sometimes it required a "force quit" action to close the app. The error now occurs each time i try to connect w
-
BDC - not working in 'No Display' mode
Hi Friends, I have written a BDC for TCode O3URV_SS0.I have used CALL TRANSACTION for that.For capturing messages I have used application log. In 'N' mode this BDC is not performing properly.For a new set of line item and a header data it should sav
-
Dears, Actually am using a dll which will give a output string like this. string1 followed by a null character string2 followed by a null character string4 followed by a double null character which indicates end of the string. How can i extract it an