Ringback Tone will not reset
I have tried to reset my ringback tones for the last 5 days with no luck. I go to the ringback manager. Change the default which was some lousy Verizon classical and choose one of the 7 that I have to be the default. Change is made on the site but never transfers to my phone. Can someone help?
Yes I am
Sent from my iPhone
Similar Messages
-
I have purchased new ringback tones since my others have expired but they will not play. I am using a Samsung Galaxy S4 and have never had a problem in the past with the ringback tones. I have it set up on a jukebox, which is set as my default. It's pretty frustrating that I have bought these tones but I am not able to use them. Any suggestions?
Are you on a shared plan? Did you log in to My Verizon using your own unique phone number and pasword? Each line on an account needs to have it's own separate login and password on My Verizon to purchase ringtones, ringbacks, and other services that will be used on that specific line.
-
I bought a new ringback tone on October 1 and it will not play. I have set it as default, set it for all days, etc. and all I get is the Verizon classical thing. HELP!
Let's make sure that you can personalize your calls, k_u_jayhawk1998. Was the Ringback Tone added to your line through My Verizon with your phone number as the login? Were you able to verify that the default tone is not set for specific callers? Have you been able to use Ringback Tones in the past?
AndreaS_VZW
Follow us on Twitter @VZWSupport -
D110 will not reset content level of refilled black HP60 cartridge
Had an HP60 black cartridge refilled, at Costco, D110 will not reset ink content level and therefore will not print.
Tried several, supposed, solutions on web, including one on HP support site, low ink level will not reset.
Is there anyway to reset the printer so one is able to utilize refilled cartridges or is this an exzmple of a manufacturer ensuring new cartridges have to be purchased from them?
Printer is wirelessly connected to an IMac running Lion (OS X10.7.2)Solved the problem!
I purchased a Samsung ML-1865W monochrome laser, wireless printer from Office Depot for $49.99.
Starter toner cartridge good for 700 pages.
Setup took 10 minutes, including wireless network configuration.
Sorry HP you want to play games you have to be prepared to lose. -
my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
thanks!The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.
-
I tried updating to iso 8.0.2 and now my iPad is stuck in recovery mode and will not do anything. it will not reset.
RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
Ipod Touch 4th generation 32G not turning on, not charging.
I have used multiple cords on both computer USB and wall USB converters. I let it sit there for over 20 min with each attempt.
It is not being detected by Itunes or my Windows 7 64bit OS. I have tried all 4 of my USB ports (both USB 2.0 and 3.0), with 3 different chargers.
Holding home and power button will not reset.
Tried taking it out of "DFU" mode but Itunes won't detect it, I didn't think that would work anyway.
NO DAMAGE, I have been very careful with it, aside from a few minor scratches. (that you can't even see unless the light reflects them)
My Itunes is up to date, as is my OS.
All I'm getting is a blank black screen. It has been working fine on this computer before. I have no idea what could have happened. I'm at my wits end here.See if you missed anything here:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
ok guys i need help anyone with my ipod it froze during an update now it will not work at all i ahve put it into the recovery mode or dfu and it will not reset it self it comes up with an error message 1603 the number is and says the ipod cannot be reset anyone please help me i have tryed everything googled you tubed everything
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Error 1603
Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts. -
I Have forgotten my passcode and I have connected it to iTunes to factory reset but will not reset it please help
Hi ..
Follow the instructions here > iOS: Forgotten passcode or device disabled after entering wrong passcode -
Nano 5th Gen will NOT reset or connect to iTunes
I've tried the usual toggling of the hold button followed by the menu/select button on this Nano, which has worked on other models that I own. This Nano will not reset and isn't recognized when plugged into iTunes. Just the black screen no matter what. Out of warranty, so any suggestions other than taking to Apple would be greatly appreciated!
If none of the suggestions mentioned in the iPod Nano 5th Gen. User Manual and on the iTunes & iPod Hints & Tips website, you should take the iPod Nano to an Apple store or an AASP. Whichever is more convenient for you. If you have Apple Care, take advantage of it by calling them.
-
ODBC connection to Oracle 7 will not reset
We are using Oracle JDBC drivers for all but one of our
datasources which is an old Oracle 7 database. The ODBC connection
to this database will not reset when the database is bounced or the
database server is rebooted. We have to restart the ODBC service to
reset the connection. Is there another way to do this automatically
or perhaps another driver out there we can use? We are running
ColdFusion MX 6.1 Enterprise.Wow, I can't believe that you are still using Oracle 7. In
fact, unless you are on 7.3.4 you aren’t even Y2K compliant.
Of course, I'm not even sure if there is an upgrade path from 7.x
to 10g, but I would consider migrating off of 7 to anything else.
Otherwise, you are going to have more and more compatibility
problems. In fact, you can no longer even get ODBC drivers from
Oracle for versions older than 9i.
Good luck.
Phil -
my iphone 3g is in reset mode and i tunes will not reset. it pops an error message with no code. how can i get i tunes to rest my phone?
No need to Double Post... It is considered impolite.
https://discussions.apple.com/message/20652820#20652820 -
IPod will not reset no way, no how, but works.
5th gen 30 GB iPod about two months old will not reset. It isn't frozen, but it will not reset. I've done everything except restoring it and I'm hesitating to do that because I'm not sure how to back up all the music on the iPod to iTunes. There are more songs on the iPod than are on the computer. Is there some way to copy all the songs from the iPod onto the computer???
If it's not frozen, why would you need to reset it?
-
My 2nd Gen touch will not reset. I hold down the HOME and SLEEP/WAKE buttons simultaneously until the Apple logo appears. All of my music and video is still on it. Any ideas? Thanks.
Could you be more specific? You wanna restore your ipod touch or reset it?
If you wanna reset it, that is it.
If you wanna restore it, connect iPod touch. When it appears in the Source list, click on Restore in the Summary
See this ipod touch trouble shooting for help
http://www.dvdtopreviews.com/article/ipod-touch-basic-troubleshootings.html -
My ITouch will not reset. It has the connect to ITunes icon on the screen, but will not connect or reset.
Try kicking it out of recovery mode using RecBoot. If that does not work, the articles in #3 in link below to restore it.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
Maybe you are looking for
-
How do i convert an email to a pdf file
How do I turn an email to a pdf file
-
Mac Pro Thunderbolt, USB3, etc. hardware upgrades...
Feeling a bit left out in 2 years since I bought my Mac Pro with no real hardware upgrades for my Mac Pro. Can anyone comment on what they've done to keep their Mac Pro updated with the latest? - Thunderbolt. I was surprised this wasn't in the updat
-
Error in Enhancing the Standard SAP Enterprise Service
Hi All, I have enhanced standard SAP Enterprise service, when i am going to test in wsnavigator , I am facing the below problem.. ERROR : Definition of /wsdl:definitions/wsdl:types/xsd:schema[1]/xsd:attributeGroup/xsd:attribute is not correct. Missin
-
Dear experts Few users are needed to shift from one Organisation to other Organisation witing the EBP Organisation. In this case, already few open PO's are there which are created by that user. Changing the user from one org to other org will effect
-
Hi all, I want to know what exactly is the meaning of B2B communication and A2A communication.How are both of them different? How exactly does the concept of "Party" help to establish B2B communication. Many Thanks, Neha